Engineering Papers⌕ Search

Engineering topics

Kahle, A. B.

Publications and source records attributed to Kahle, A. B..

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Sessions on remote sensing 1980; Proceedings of the Topical Meeting, Budapest, Hungary, June 2-14, 1980

Studies included in this volume deal with spectral responses for remote sensing of the earth's surface and applications of remote sensing to mineral exploration. Consideration is given to the spectral responses of vegetation, bare land, water, and snow. Papers are presented on spectral reflectance characteristics of agricultural crops and application to crop growth monitoring, detection of volcanic ash coverage from Landsat MSS data, application of multispectral data to the detection of sea surface phenomena, and ore-controlling structures in volcanic regions observed on space images.

Kahle, A. B.↗
NASA NTRS1981

A data base of geologic field spectra

It is noted that field samples measured in the laboratory do not always present an accurate picture of the ground surface sensed by airborne or spaceborne instruments because of the heterogeneous nature of most surfaces and because samples are disturbed and surface characteristics changed by collection and handling. The development of new remote sensing instruments relies on the analysis of surface materials in their natural state. The existence of thousands of Portable Field Reflectance Spectrometer (PFRS) spectra has necessitated a single, all-inclusive data base that permits greatly simplified searching and sorting procedures and facilitates further statistical analyses. The data base developed at JPL for cataloging geologic field spectra is discussed.

Kahle, A. B.↗
NASA NTRS1981

Some examples of the utility of HCMM data in geologic remote sensing

Examples of HCMM (Heat Capacity Mapping Mission) data in geologic remote sensing are presented, and the data set is composed of HCMM and aircraft digital scanner data and ground truth data from four western U.S. test sites. Data are used in the thermal model to test thermal data effectiveness, and changes in temperature with depth and time for dry soils are described by the model. It is found that the HCMM thermal inertia image is useful in the separability of bedrock and alluvium in Death Valley, and aa and pahoehoe flows in the Pisgah basalt flow. In a color composite of HCMM day temperature, night temperature, and day visible images of the Pisgah Crater test site, it is possible to distinguish alluvium, playa, aa and pahoehoe basalt flow, rhyolite intrusives, and other elements. Ground checking of units at a few points will extend capabilities to large areas and assist in creating telegeologic maps.

Kahle, A. B.↗
NASA NTRS1980

Geologic application of thermal inertia imaging using HCMM data

During the July to September 1980 quarter the final tapes were received completing the order and preliminary processing was done. Thermal Inertia images for each of the three test sites, Death Valley and Pisgah Crater, California and Goldfield, Nevada were created using registered HCMM day/night pairs and the JPL model. A comprehensive study and analysis of the geologic application of all acquired HCMM data is in progress.

Paley, H. N.↗
NASA NTRS1980

Joint microwave and infrared studies for soil moisture determination

The feasibility of using a combined microwave-thermal infrared system to determine soil moisture content is addressed. Of particular concern are bare soils. The theoretical basis for microwave emission from soils and the transport of heat and moisture in soils is presented. Also, a description is given of the results of two field experiments held during vernal months in the San Joaquin Valley of California.

Njoku, E. G.↗
NASA NTRS1980

Geologic application of thermal inertia imaging using HCMM data

The feasibility of using thermal inertia, inferred from remotely sensed temperature data, to complement LANDSAT reflectivity data for reconnaissance geologic mapping and mineral exploration is under investigation. The bulk of HCMM data tapes was received and processed, and a thermal inertia image of one data set was made. Additional areas of interest were identified on the HCMM photographic products and data tapes were ordered for these areas. During analysis of selected subareas, various sedimentary rock units were distinguished in the Death Valley, California test site and areas of altered rock were identified in the Cuprite/Goldifield, Nevada test site.

Paley, H. N.↗
NASA NTRS1980

Middle infrared multispectral aircraft scanner data - Analysis for geological applications

Multispectral middle IR (8-13 microns) data were acquired with an aircraft scanner over Utah. Because these digital image data were dominated by temperature, all six channels were highly correlated. Extensive processing was required to allow geologic photointerpretation based on subtle variations in spectral emittance between rock types. After preliminary processing, ratio images were produced and color ratio composites created from these. Sensor calibration and an atmospheric model allowed determination of surface brightness, temperature, emittance, and color composite emittance images. The best separation of major rock types was achieved with a principal component transformation, followed by a Gaussian stretch, followed by an inverse transformation to the original axes.

Kahle, A. B.↗
NASA NTRS1980

Evaluation of multispectral middle infrared aircraft images for lithologic mapping in the East Tintic Mountains, Utah

Six channels of multispectral middle infrared (8 to 14 micron) aircraft scanner data were acquired over the East Tintic mining district, Utah. This area has high relief and moderate vegetation and consists mainly of Tertiary silicic igneous rocks and Paleozoic quartzite and carbonate rocks that have been locally hydrothermally altered. These digital-image data were computer processed to create a color-composite image based on principal component transformations. Color differences in this image are related to the spectral differences in the surface material and allow discrimination of several rock types, depending primarily on their silica content. When combined with a visible and near infrared color-composite image from a previous flight, with limited field checking, it is possible to discriminate quartzite, carbonate rocks, quartz latitic and quartz monzonitic rocks, latitic and monzonitic rocks, silicified altered rocks, argillized altered rocks, and vegetation.

Kahle, A. B.↗
NASA NTRS1980

Use of thermal-inertia properties for material identification

It is noted that a knowledge of the thermal inertia of the earth's surface can be used in geologic mapping as a complement to surface reflectance data as provided by Landsat. Thermal inertia, which is a body property, cannot be determined directly but can be inferred from radiation temperature measurements made at various times in the diurnal heating cycle, combined with a model of the surface heating processes. A model of this type is developed and applied along with temperature measurements made in the field and by satellite to determine thermal properties of surface materials. An example from a test site in western Nevada is used to demonstrate the utility of this technique.

Schieldge, J. P.↗
NASA NTRS1979

Processing of multispectral thermal IR data for geologic applications

Multispectral thermal IR data were acquired with a 24-channel scanner flown in an aircraft over the E. Tintic Utah mining district. These digital image data required extensive computer processing in order to put the information into a format useful for a geologic photointerpreter. Simple enhancement procedures were not sufficient to reveal the total information content because the data were highly correlated in all channels. The data were shown to be dominated by temperature variations across the scene, while the much more subtle spectral variations between the different rock types were of interest. The image processing techniques employed to analyze these data are described.

Kahle, A. B.↗
NASA NTRS1979

Geologic applications of thermal inertia image using HCMM data

The author has identified the following significant results. Comparison of a simulated HCMM image of the Pisgah Crater, California test site obtained from aircraft data with an image generated from the preliminary satellite data tape of the area indicates that the HCMM satellite data appears much as predicted by the simulation.

Kahle, A. B.↗
NASA NTRS1979

Geologic application of thermal inertia imaging using HCMM data

The author has identified the following significant results. The day infrared and visible HCMM satellite data for Death Valley taken on 31 May 1978 were compared with aircraft data of the same area taken in March of the same year. In the visible image, it is possible to note the drying of the valley floor during the two month period between acquisition of the two data sets. On the IR image however, the valley floor remains cool, probably indicating that while the standing water has disappeared, the floor is still moist.

Paley, H. N.↗