Engineering topics

Jones, R. E.

Publications and source records attributed to Jones, R. E..

At least 37 records · Page 2

NASA NTRS1978

Results and status of the NASA aircraft engine emission reduction technology programs

The results of an aircraft engine emission reduction study are reviewed in detail. The capability of combustor concepts to produce significantly lower levels of exhaust emissions than present production combustors was evaluated. The development status of each combustor concept is discussed relative to its potential for implementation in aircraft engines. Also, the ability of these combustor concepts to achieve proposed NME and NCE EPA standards is discussed.

Jones, R. E.↗

NASA NTRS1978

Design and preliminary results of a semitranspiration cooled /Lamilloy/ liner for a high-pressure high-temperature combustor

A Lamilloy combustor liner has been designed, fabricated and tested in a combustor at pressures up to 8 atmospheres. The liner was fabricated of a three layer Lamilloy structure and designed to replace a conventional step-louver liner. The liner will be used in a combustor that provides hot gases to a turbine cooling test facility at pressures up to 40 atmospheres. The Lamilloy liner was tested extensively at lower pressures and demonstrated lower metal temperatures than the conventional liner, while at the same time requiring about 40 percent less cooling air flow. Tests conducted at combustor exit temperatures in excess of 2200 K have not indicated any cooling or durability problems with the Lamilloy liner.

Wear, J. D.↗

NASA NTRS1978

Nonlinear finite elements

Comprehensive survey of past and current literature on geometrically-nonlinear finite elements is organized into handbook form and serves as valuable reference when solving problems in nonlinear structural mechanics. Handbook provides rapid access to wide variety of element types and facilitates evaluation of different elements as to their features, probable accuracy, and complexity.

Jones, R. E.↗

NASA NTRS1978

Design and preliminary results of a semitranspiration cooled (Lamilloy) liner for a high-pressure high-temperature combustor

A Lamilloy combustor liner was designed, fabricated and tested in a combustor at pressures up to 8 atmospheres. The liner was fabricated of a three layer Lamilloy structure and designed to replace a conventional step louver liner. The liner is to be used in a combustor that provides hot gases to a turbine cooling test facility at pressures up to 40 atmospheres. The Lamilloy liner was tested extensively at lower pressures and demonstrated lower metal temperatures than the conventional liner, while at the same time requiring about 40 percent less cooling air flow. Tests conducted at combustor exit temperatures in excess of 2200 K have not indicated any cooling or durability problems with the Lamilloy linear.

Wear, J. D.↗

NASA NTRS1978

Gas turbine engine emissions - Problems, progress and future

The current status of the problem of gas turbine engine emissions is reviewed. Presently promulgated EPA standards and their implications for aircraft gas turbines are discussed. The progress and status of emissions reduction technology programs and other efforts which have emphasized advanced combustor technology are reviewed in detail. Also examined are those efforts underway to determine the emissions floor and incorporate those techniques into practical combustors of the future.

Jones, R. E.↗

NASA NTRS1977

Emissions Reduction Technology Program

Combustor concepts having the potential for significantly lower emissions levels were investigated. The combustor emissions reduction was measured in an engine test. Emission characteristics common to all engine classes are shown. Multiple-burning zone combustors, specifically the double-annular and swirl-can combustors were studied. Airblast and air-assist fuel injection techniques were evaluated for emissions control potential. The combustor sceening and refining phases are summarized.

Jones, R. E.↗

NASA NTRS1976

A high-pressure, high-temperature combustor and turbine-cooling test facility

NASA-Lewis Research Center is presently constructing a new test facility for developing turbine-cooling and combustor technology for future generation aircraft gas turbine engines. Prototype engine hardware will be investigated in this new facility at gas stream conditions up to 2480 K average turbine inlet temperature and 4,140,000 N per sq m turbine inlet pressure. The facility will have the unique feature of fully-automated control and data acquisition through the use of an integrated system of minicomputers and programmable controllers, which will result in more effective use of operating time, will limit the number of operators required, and will provide a built-in self-protection safety system. The paper describes the facility and the planning and design considerations involved.

Cochran, R. P.↗

NASA NTRS1975

The San Juan Capistrano meteorite

The San Juan Capistrano chondrite fell on 15 March 1973; the total recovered mass was 56 g. Electron microprobe, chemical and petrographic studies show it to be a member of the H group and of petrologic type 6. Rare gas studies show that only minor radiogenic gas loss has occurred and yield a K-Ar age of 4.6 billion years and a Kr-Kr exposure age of 29 million years.

Finkel, R. C.↗

NASA NTRS1974

The experimental clean combustor program - Description and status

The experimental clean combustor program is a contract effort with primary objectives including the generation and demonstration of technology for development of advanced commercial CTOL aircraft engines with lower exhaust emissions than current aircraft, and the demonstration of this technology in full scale engines in 1976. The program is being conducted in three phases. These consist of screening of low pollutant combustors, refinement of the best combustors, and engine demonstration of the best combustors. Pollution goals are emission index values of 20 and 4 for carbon monoxide and unburned hydrocarbons respectively at engine idle conditions, and an oxides of nitrogen emission index level of 10 at engine takeoff conditions. Pollution reduction approaches which are being investigated include multiple burning zone combustors, investigations of improved fuel distribution, and preparation and the staging of combustor airflow.

Niedzwiecki, R. W.↗

NASA NTRS1974

The experimental clean combustor program: Description and status

The objectives, program plan, schedule, pollution and performance goals, program approaches to pollution reduction, and status of the project are presented. Advanced supersonic transport and combustion noise programs are also discussed. The phases of the program consist of the following: (1) screening of low pollutant combustors, (2) refinement of the best combustors, and (3) engine demonstration of the best combustors. It is stated that all combustor designs investigated appear capable of achieving the idle pollutant goals with additional development effort.

Niedzwiecki, R. W.↗

NASA NTRS1973

Use of an air-assisted fuel nozzle to reduce idle emissions of a jt8d engine combustor

Tests were performed at typical engine idle conditions on a single-can JT8D combustor installed in a 24 centimeter (9.45 in.) housing to evaluate the effect of an air-assist nozzle on reducing exhaust emissions. By injecting high-pressure air through the secondary-flow passage of a standard duplex fuel nozzle, it was possible to reduce hydrocarbon emissions from 840 parts per million to 95 parts per million and carbon monoxide emissions from 873 parts per million to 258 parts per million. NOX emissions increased slightly from 18 parts per million to 22 parts per million. An air-assist differential pressure of only 20.1 newtons per square centimeter (29.1 psi) and an airflow rate of only 0.22 percent of the total combustor airflow was required.

Papathakos, L. C.↗

NASA NTRS1973

Advanced technology for reducing aircraft engine pollution

The proposed EPA regulations covering emissions of gas turbine engines will require extensive combustor development. The NASA is working to develop technology to meet these goals through a wide variety of combustor research programs conducted in-house, by contract, and by university grant. In-house efforts using the swirl-can modular combustor have demonstrated sizable reduction in NO emission levels. Testing to reduce idle pollutants has included the modification of duplex fuel nozzles to air-assisted nozzles and an exploration of the potential improvements possible with combustors using fuel staging and variable geometry. The Experimental Clean Combustor Program, a large contracted effort, is devoted to the testing and development of combustor concepts designed to achieve a large reduction in the levels of all emissions. This effort is planned to be conducted in three phases with the final phase to be an engine demonstration of the best reduced emission concepts.

Jones, R. E.↗

NASA NTRS1973

Dynamic analysis of a long span, cable-stayed freeway bridge using NASTRAN

The dynamic analysis for earthquake- and wind-induced response of a long span, cable-stayed freeway bridge by NASTRAN in conjunction with post-processors is described. Details of the structural modeling, the input data generation, and numerical results are given. The influence of the dynamic analysis on the bridge design is traced from the project initiation to the development of a successful earthquake and wind resistant configuration.

Salus, W. L.↗

NASA NTRS1973

Swirl can primary combustor

A swirl can full annulus combustor, operable over a wide range of exit average temperatures is used in a high performance gas turbine engine for advanced aircraft. A large number of swirl can modules are mounted in an array in each combustor.

Jones, R. E.↗

NASA NTRS1973

Parametric test results of a swirl-can combustor.

Pollutant levels of oxides of nitrogen, unburned hydrocarbons, and carbon monoxide were measured for three models of an experimental, annular swirl can combustor. The combustor was 1.067 meters in outer diameter, incorporated 120 modules, and was specifically designed for elevated exit temperature performance. Test conditions included combustor inlet temperatures of 589, 756, and 839 K, inlet pressures of 3 to 6.4 atmospheres, reference velocities of 21 to 38 meters per second, and combustor equivalence ratios, based on total combustor flows, of 0.206 to 1.028. Maximum oxides of nitrogen emission index values occurred at an equivalence ratio of 0.7 with lower values measured for both higher and lower equivalence ratios.

Niedzwiecki, R. W.↗

NASA NTRS1973

Design and evaluation of combustors for reducing aircraft engine pollution.

This report summarizes some of the NASA Lewis Research Center's recent efforts in reducing exhaust emissions from turbine engines. Various techniques employed and the results of testing are briefly described and referenced for detail. The experimental approaches taken to reduce oxides of nitrogen emissions include the use of: multizone combustors incorporating reduced dwell time, fuel-air premixing, air atomization, fuel prevaporization and gaseous fuel. Since emissions of unburned hydrocarbons and carbon monoxide are caused by poor combustion efficiency at engine idle, the studies of fuel staging in multizone combustors and air assist fuel nozzles have indicated that large reductions in these emissions can be achieved. Also, the effect of inlet-air humidity on oxides of nitrogen was studied as well as the very effective technique of direct water injection. The emission characteristics of natural gas and propane fuels were measured and compared with those of ASTM-Al kerosene fuel.

Jones, R. E.↗

NASA NTRS1973

Comparison of combustion characteristics of ASTM A-1, propane, and natural-gas fuels in an annular turbojet combustor

The performance of an annular turbojet combustor using natural-gas fuel is compared with that obtained using ASTM A-1 and propane fuels. Propane gas was used to simulate operation with vaporized kerosene fuels. The results obtained at severe operating conditions and altitude relight conditions show that natural gas is inferior to both ASTM A-1 and propane fuels. Combustion efficiencies were significantly lower and combustor pressures for relight were higher with natural-gas fuel than with the other fuels. The inferior performance of natural gas is shown to be caused by the chemical stability of the methane molecule.

Wear, J. D.↗

NASA NTRS1973

Design and evaluation of combustors for reducing aircraft engine pollution

Efforts in reducing exhaust emissions from turbine engines are reported. Various techniques employed and the results of testing are briefly described and referenced for detail. The experimental approaches taken to reduce oxides of nitrogen emissions include the use of: (1) multizone combustors incorporating reduced dwell times, (2) fuel-air premixing, (3) air atomization, (4) fuel prevaporization, and (5) gaseous fuel. Since emissions of unburned hydrocarbons and carbon monoxide are caused by poor combustion efficiency at engine idle, the studies of fuel staging in multizone combustors and air assist fuel nozzles have indicated that large reductions in these emissions can be achieved. Also, the effect of inlet-air humidity on oxides of nitrogen was studied as well as the very effective technique of direct water injection. The emission characteristics of natural gas and propane fuels were measured and compared with those of ASTM-Al kerosene fuel.

Jones, R. E.↗