Engineering Papers⌕ Search

Engineering topics

Jones, D. L.

Publications and source records attributed to Jones, D. L..

At least 91 records · Page 5

An unusually strong Einstein ring in the radio source PKS1830 - 211

High-resolution radio images of PKS1830 - 211 are obtained to study the possibility that the double structure is a gravitationally lensed object. The VLBI observations, taken from interferometric radiotelescope networks, reveal an elliptical ring that connects two bright spots of similar composition. Because the lens and the lensed object are closely aligned, and because of the structure of the two spots, the source is concluded to be a radio Einstein ring. The source is found to be close to the galactic plane, and the lens and the lensed object are extragalactic. The source is also found to be unusually bright, suggesting that it is aligned with a bright background source or amplified by some mechanism related to a source that is not so bright.

Jauncey, D. L.↗

Speckles in interstellar radio-wave scattering

Observations of speckles in the scattering disk of the Vela pulsar are presented and speckle techniques for studying and circumventing scattering of radio waves by the turbulent interstellar plasma are discussed. The speckle pattern contains, in a hologrammatic fashion, complete information on the structure of the radio source as well as the distribution of the scattering material. Speckle observations of interstellar scattering of radio waves are difficult because of their characteristically short timescales and narrow bandwidths. Here, first observations are presented, taken at 13 cm wavelength with elements of the SHEVE VLBI network, of speckles in interstellar scattering.

Desai, K. M.↗

Load biaxiality and fracture - Synthesis and summary

The question of load biaxiality strongly affecting almost all of the characteristics of brittle fracture behavior of a cracked body is investigated. Results of research published piecemeal over the years by the authors have shown that the stress and displacement fields, the elastic strain energy density, and the maximum shear stress near the crack tip are all altered by loads applied parallel to the crack, as are the angle of initial crack extension, the strain energy of the entire body, the fracture load, and the rate of fatigue crack growth. A synthesis and summary of this research is presented showing the shortcomings inherent in both Griffith's global energy rate theory for crack instability and Irwin's local crack-tip stress intensity theory for fracture toughness. In both theories only the tensile load perpendicular to the crack influences fracture behavior of the body.

Eftis, J.↗

Lunar low-frequency radio array

A simple, inexpensive experiment is proposed for the early lunar mission to make high angular resolution observations in one of the last unexplored parts of the electromagnetic spectrum. An array of nineteen simple crossed-dipole antennas will make images at frequencies below the earth's ionospheric cut-off - from about 100 kHz to 10 MHz. It would serve as a precursor to a major low-frequency telescope which would eventually be built on the back of the moon, away from terrestrial interference.

Kuiper, T. B. H.↗

A simple low-cost array on the lunar near-side for the early lunar expeditions

A concept of a simple, low-cost array on the lunar near-side is discussed. The concept includes 19 stations laid in a T, with three arms each 36 km long, and separated by 6 km. Each station consists of two 10-m-long orthogonal dipoles, each feeding a receiver of a commercial pocket digital shortwave radio type, and a 3-m spring-loaded mast with a small UHF array at the top for receiving the timing signals and tuning commmands and for sending out the digitized data streams. Each station has 0.25 square meters of solar arrays and 20 kg of lithium batteries. At the array center there is either a digital correlator for processing the signals from each antenna pair to compact the data into a 32-kb/sec channel or a 10-cm telescope for sending back raw data to earth.

Kuiper, T. B. H.↗

Very-Long-Baseline Interferometry Using Cheap Satellites

Celestial radiation below 25 MHz, heretofore inaccessible, yields new insights. Report discusses feasibility of array of small satellites deployed in high orbit around Earth to monitor celestial radio sources at frequencies less than 25 MHz. Objective to make high-angular-resolution map of such sources over entire sky by use of very-long-baseline interferometry (VLBI).

Mahoney, M. J.↗

Modeling the viscoplastic behavior of Inconel 718 at 1200 F

A large number of tests, including tensile, creep, fatigue, and creep-fatigue were performed to characterize the mechanical properties of Inconel 718 (a nickel based superalloy) at 1200 F, the operating temperature for turbine blades. In addition, a few attempts were made to model the behavior of Inconel 718 at 1200 F using viscoplastic theories. The Chaboche theory of viscoplasticity can model a wide variety of mechanical behavior, including monotonic, sustained, and cyclic responses of homogeneous, initially-isotropic, strain hardening (or softening) materials. It is shown how the Chaboche theory can be used to model the viscoplastic behavior of Inconel 718 at 1200 F. First, an algorithm was developed to systematically determine the material parameters of the Chaboche theory from uniaxial tensile, creep, and cyclic data. The algorithm is general and can be used in conjunction with similar high temperature materials. A sensitivity study was then performed and an optimal set of Chaboche's parameters were obtained. This study has also indicated the role of each parameter in modeling the response to different loading conditions.

Abdel-Kader, M. S.↗

Direct and interferometric imaging approaches for detecting earth-like extrasolar planets

This paper discusses functional requirements of space-based observational systems with sufficient sensitivity, resolution, and dynamic range to image earth-like extrasolar planets within a search radius of 10 parsecs from the sun. Both direct and interferometric systems operating at visible and infrared wavelengths are evaluated, and the methods used to establish the system tolerances are presented. Due to the more favorable star/planet contrast ratio in the infrared, optical tolerance requirements are less stringent than in the visible. However, reduction of thermal radiation from the telescope requires cooling of the primary optics. Other tradeoffs between various approaches are enumerated.

Diner, D. J.↗

Radio observations of SN 1987A

The study of radio emission from SN 1987A after the neutrino burst is reviewed. The observed maximum flux density of the burst at radio wavelengths was about 140 mJy and occurred at 1.4 GHz. The radio light curves for SN 1987A at four frequencies are compared with data for SN 1979C and SN 1980K. VLBI observations of SN 1987A at 2.3 GHz and other radio monitoring programs are examined.

Bartel, N.↗

The Pearson-Readhead Survey from Space

The VSOP Space VLBI mission uses the HALCA spacecraft, launched from Japan in February 1997, in conjunction with ground radio observatories around the world to create a high resolution radio-wave length imaging facility. We are using this unique facility to observe a complete sample of Pearson-Readhead Survey sources at 4.8 GHz to determine core brightness temperatures and pc-scale jet properties. The Pearson-Readhead sample has been used for extensive ground-based VLBI survey studies. This sample is ideal for a VSOP survey because the sources are strong, the VSOP u-v coverages are especially good above +350 declination, and multi-epoch ground-based VLBI data and other existing supporting data on these sources exceeds that of any other possible sample. We have chosen to observe a complete subset of this sample that is most likely to show fringes on space-earth baselines. To date we have imaged a majority of the 31 sources in our sample. In addition, we are obtaining matched- resolution 15 GHz observations using the VLBA at epochs close in time to the space VLBI observations to investigate the spectral indices of the source components at high resolution. We gratefully acknowledge the VSOP Project, which is led by the Japanese Institute of Space and Astronautical Science in cooperation with many organizations and radio telescopes around the world. This research was performed in part at the Jet Propulsion Laboratory, California Institute of Technology, under contract to NASA.

Preston, R. A.↗

Low frequency VLBI in space using GAS-Can satellites: Report on the May 1987 JPL Workshop

Summarized are the results of a workshop held at JPL on May 28 and 29, 1987, to study the feasibility of using small, very inexpensive spacecraft for a low-frequency radio interferometer array. Many technical aspects of a mission to produce high angular resolution images of the entire sky at frequencies from 2 to 20 MHz were discussed. The workshop conclusion was that such a mission was scientifically valuable and technically practical. A useful array could be based on six or more satellites no larger than those launched from Get-Away-Special canisters. The cost of each satellite could be $1-2M, and the mass less than 90 kg. Many details require further study, but as this report shows, there is good reason to proceed. No fundamental problems have been discovered involving the use of untraditional, very inexpensive spacecraft for this type of mission.

Mahoney, M. J.↗

Collaborative VLBI experiments with Radioastron

The USSR is planning to launch a 10-m radio telescope into earth orbit for use in VLBI observations. This mission (Radioastron) will be the first opportunity for astronomically important VLBI experiments with baselines much longer than can be obtained between telescopes on the earth. This paper describes the potential scientific advantages of combining data from the orbiting telescope with data from some of the very sensitive radio telescopes in western Europe, Australia, Japan, and the U.S. The advantages of using NASA's Space Network telescopes to track the Radioastron spacecraft when it is not visible from Soviet tracking stations are considered.

Jones, D. L.↗

High dynamic range VLBI observations of NGC 6251

The large radio galaxy NGC 6251 has been observed with an 11-telescope VLBI array, including the full VLA, at 18 cm. High-dynamic-range maps of both the VLBI-scale and VLA-scale radio structure from these observations, as well as hybrid maps from earlier VLBI experiments at 6 and 13 cm, are presented. The 18-cm VLBI hybrid map has an unusually high dynamic range of about 300 to 1 (ratio of the peak brightness to five times the rms noise level) and is limited by thermal noise rather than calibration errors. A lower limit of 80 to 1 for the ratio of jet/counterjet brightness at parsec scales can be set. This is the strongest such limit produced by VLBI observations of any source to date. If the absence of a detectable counterjet is caused by relativistic beaming, then the jet must be aligned within 45 deg of the line of sight. The VLA map shows a complex structure along the previously detected kiloparsec-scale counterjet. The physical conditions in the inner few parsecs of the NGC 6251 jet and their relation to the conditions in the extraordinarily long and well collimated kiloparsec-scale jets are discussed, and it is shown that both small-scale and large-scale morphology can be explained in terms of a simple model and relativistic beaming.

Jones, D. L.↗

The effects of biaxial loading on the fracture characteristics of several engineering materials

Using the George Washington University biaxial test system, a static fracture toughness study of two polymers (PMMA and PVC) and three aluminum alloys was performed for several variations in specimen geometry. Photoelastic experiments indicate that the applied load biaxiality has a very strong influence on the size and shape of the crack-tip stress field, and fracture toughness values for both polymers were seen to decrease with increasing load biaxiality. The load biaxiality was also found to have a strong influence on the crack growth direction in PMMA and a negligible influence on the PVC. The 7075-T6 aluminum toughness values increased with biaxiality, while intermediate peak toughness values were noted at a 0.5 biaxiality ratio for the more ductile 2024-T3 and 6061-T4 alloys. Fracture toughnesses at the highest biaxiality ratios were found to be equal to the uniaxial results.

Jones, D. L.↗

Does orientation affect the smoothness of parsec-scale radio jets?

The compact, nonthermal radio sources which are studied with very-long-baseline interferometry (VLBI) are often found to have a linear structure with a bright, nearly unresolved component at one end. This asymmetric structure is usually referred to as a 'core-jet' morphology. In some sources there are bright bumps or knots - regions of enhanced radio emission - along the 'jets', while other sources have relatively smooth, featureless jets. This paper reports the result of a study of the differences between compact radio sources with bumpy and smooth jets. It is concluded that most, if not all, of the difference in jet smoothness can be attributed to the orientation of the radio axis with respect to the line of sight. Thus, the VLBI observations do not necessarily imply that there are intrinsic differences in the smoothness of parsec-scale radio jets.

Jones, D. L.↗

Determination of the stiffness reduction of (0,90, + or - N 45) graphite/epoxy laminates under cyclic loading

A series of tests has been performed to determine the effect of fatigue loading on the stiffness degradation of graphite/epoxy composite materials. Specimens were tested in tension-tension fatigue at a loading frequency of 10 Hz and a stress ratio of 0.1, for a wide range of stress levels. During this investigation, both static and dynamic stiffnesses were continually monitored for the range of stress levels tested, and the results are presented in tabular and graphical form.

Jones, D. L.↗

The effect of cyclic loading on the stiffness degradation of angle-ply composite laminates

An experimental investigation has been conducted to determine the effect of cyclic loading on the stiffness degradation of composite laminates. Specimens were tested in tension-tension fatigue at a frequency of 10 Hz and a stress ratio of 0.1, over a wide range of stress levels. The laminate employed for this investigation was made of graphite/epoxy in an angle-ply (+ or - 35)2s orientation. During this investigation both static and dynamic stiffness reduction data were recorded during constant amplitude fatigue testing, and the results are presented in tabular and graphical form.

Jones, D. L.↗

Load sequence effects on graphite/epoxy /+, -35/2s laminates

Load sequence effects on composite material fatigue behavior are due to the difference in residual strength when fatigue occurs, or the 'boundary effect', and the 'material money effect' due to previous loads. The present model, which allows the isolation of the effects of memory from those of boundary, has been investigated through a test program for the case of /+, -35/2s graphite/epoxy laminates under high-low and low-high load sequences which generated statistical residual strength data. As predicted by the model, the memory effect is present and a good correlation is obtained between test results and the theoretical predictions for both median residual strength and the expected percentage of fatigue failures under dual loading. It is noted, however, that the statistical dispersion of the residual strength test results is much smaller than that of the static ultimate strength.

Yang, J. N.↗