Engineering Papers⌕ Search

Engineering topics

Jiang, Wei

Publications and source records attributed to Jiang, Wei.

At least 73 records · Page 4

Topological band evolution between Lieb and kagome lattices

Among two-dimensional lattices, both kagome and Lieb lattices have been extensively studied, showing unique physics related to their exotic flat and Dirac bands. Interestingly, we realize that the two lattices are in fact interconvertible by applying strains along the diagonal direction, as they share the same structural configuration in the unit cell, i.e., one corner-site and two edge-center states. Here, we study phase transitions between the two lattices using the tight-binding approach and propose one experimental realization of the transitions using photonic devices. The evolution of the band structure demonstrates a continuous evolution of the flat band from the middle of the Lieb band to the top/bottom of the kagome band. Though the flat band is destroyed during the transition, the topological features are conserved due to the retained inversion symmetry, as confirmed by Berry curvature, Wannier charge center, and edge state calculations. Meanwhile, the triply degenerate Dirac point ( M ) in the Lieb lattice transforms into two doubly degenerate Dirac points, one of which moves along M–Γ and the other moves along M–K/K' directions that form the kagome band eventually. Interestingly, the Dirac cones in the transition states are strongly tilted, showing a coexistence of type-I and type-II Dirac points. We finally show that these transitions can be experimentally realized in photonic lattices using waveguide arrays.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dry Sliding Wear Behavior and Mechanism of a Hot-Dip Aluminized Steel as a Function of Sliding Velocity

Fe-Al intermetallic coatings were prepared on AISI 1045 steel by hot-dip aluminizing and subsequent high-temperature diffusion. The dry sliding wear tests were performed for the aluminized steel with various substrate hardnesses in the velocity range of 0.75-4 m/s on a pin-on-disk configuration. The dry sliding wear behavior and mechanisms of the aluminized steel under various velocities were explored. It was found that the wear rate decreased substantially with an increase in sliding velocity from 0.75 to 1.5 and then slightly varied in the velocity range of 1.5-4 m/s. The wear behavior and mechanisms of the aluminized steel were noticed to be closely related with tribo-layers. As tribo-layers contained more oxides with Fe{sub 2}O{sub 3}, the wear resistance of the aluminized steel was markedly improved because of their protective function. The substrate hardness also changed the wear behavior of the aluminized steel by affecting the stability of tribo-layers because the substrate hardness was inversely proportional to the thermal stability of the substrate structure. Under a low velocity of 0.75 m/s, adhesive wear and abrasive wear prevailed owing to the metal-on-metal contact, resulting in a higher wear rate. At 1.5-4 m/s, mild oxidative wear prevailed due to the stable existence of tribo-oxides layers. However, at 1.5 and 4 m/s for the substrate hardness of 45 HRC, the wear rate was slightly increased because the protection of tribo-layers was weakened by a double-layered structure or more cracks in tribo-layers and coatings.

36 MATERIALS SCIENCE↗

Accelerating Convergence of Free Energy Computations with Hamiltonian Simulated Annealing of Solvent (HSAS)

Coupling between binding of a ligand to a receptor and the displacement of a number of bound water molecules is a common event in molecular recognition processes. When the binding site is deeply buried and the exchange of water molecules with the bulk region is difficult to sample, the convergence and accuracy in free energy calculations can be severely compromised. Traditionally, Grand Canonical Monte Carlo (GCMC) based methods have been used to accelerate equilibration of water-at the expense, however, of lengthy trials before a molecular dynamics (MD) simulation. In this paper, a user-friendly and cost-efficient method, Hamiltonian simulated annealing of solvent in combination with lambda-exchange of free energy perturbation (FEP) is proposed to accelerate the sampling of water molecules in free energy calculations. As an illustrative example with reliable data from previous GCMC simulations, absolute binding affinity of camphor to cytochrome P450 was calculated. The simulated hydration state change in the buried binding pocket quantitatively agrees with GCMC simulations. Finally, it is shown that the new protocol significantly accelerates sampling of water in a buried binding pocket and the convergence of free energy, with negligible setup and computing costs compared to GCMC methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pyrolytic Behavior of Major Biomass Components in Waste Biomass

The pyrolytic behavior of several biomass components including cellulose, hemicellulose, lignin, and tannin, from two sources of waste biomass (i.e., pine bark and pine residues) were examined. Compared to the two aromatic-based components in the biomass, carbohydrates produced much less char but more gas. Surprisingly, tannin produced a significant amount of water-soluble products; further analysis indicated that tannin could produce a large amount of catechols. The first reported NMR chemical shift databases for tannin and hemicellulose pyrolysis oils were created to facilitate the HSQC analysis. Various C–H functional groups (>30 different C–H bonds) in the pyrolysis oils could be analyzed by employing HSQC-NMR. The results indicated that most of the aromatic C–H and aliphatic C–H bonds in the pyrolysis oils produced from pine bark and pine residues resulted from the lignin and tannin components. A preliminary study for a quantitative application of HSQC-NMR on the characterization of pyrolysis oil was also done in this study. Nevertheless, the concepts established in this work open up new methods to fully characterize the whole portion of pyrolysis oils produced from various biomass components, which can provide valuable information on the thermochemical mechanisms.

09 BIOMASS FUELS↗

Crystal structure of MICU2 and comparison with MICU1 reveal insights into the uniporter gating mechanism

The mitochondrial uniporter is a Ca 2+ -channel complex resident within the organelle’s inner membrane. In mammalian cells the uniporter’s activity is regulated by Ca 2+ due to concerted action of MICU1 and MICU2, two paralogous, but functionally distinct, EF-hand Ca 2+ -binding proteins. In this paper, we present the X-ray structure of the apo form of Mus musculus MICU2 at 2.5-Å resolution. The core structure of MICU2 is very similar to that of MICU1. It consists of two lobes, each containing one canonical Ca 2+ -binding EF-hand (EF1, EF4) and one structural EF-hand (EF2, EF3). Two molecules of MICU2 form a symmetrical dimer stabilized by highly conserved hydrophobic contacts between exposed residues of EF1 of one monomer and EF3 of another. Similar interactions stabilize MICU1 dimers, allowing exchange between homo- and heterodimers. The tight EF1–EF3 interface likely accounts for the structural and functional coupling between the Ca 2+ -binding sites in MICU1, MICU2, and their complex that leads to the previously reported Ca 2+ -binding cooperativity and dominant negative effect of mutation of the Ca 2+ -binding sites in either protein. The N- and C-terminal segments of the two proteins are distinctly different. In MICU2 the C-terminal helix is significantly longer than in MICU1, and it adopts a more rigid structure. MICU2’s C-terminal helix is dispensable in vitro for its interaction with MICU1 but required for MICU2’s function in cells. We propose that in the MICU1–MICU2 oligomeric complex the C-terminal helices of both proteins form a central semiautonomous assembly which contributes to the gating mechanism of the uniporter.

59 BASIC BIOLOGICAL SCIENCES↗

Recent seawater intrusion into deep aquifer determined by the radioactive noble-gas isotopes 81 Kr and 39 Ar

Radioactive noble-gas isotopes tracers 81 Kr and 39 Ar are used for the first time to measure the residence times of deep (~1000 m) saline coastal groundwater, and to determine its connection mode with the sea. The average rate of seawater intrusion into the deep aquifer in Israel, located near the Mediterranean Sea, is estimated. 81 Kr-ages of the saline water samples, found to be younger than 40 ka, contradict previously estimated ages of up to several million years based on hydrogeological considerations. The new results imply a stronger and more recent connection between the aquifer and the sea, and indicate that the intrusion occurred during the sea-level rise that began about 20 ka ago. These coastal aquifers need to be managed with caution because lowering of the adjacent fresh water level due to over pumping could accelerate seawater intrusion in a relatively short time. As a result, this study demonstrates the suitability of these two noble-gas tracers for the examination of hydrogeological systems in general and for the study of seawater intrusion in particular.

39Ar↗

In-situ evaluation for upgrading of biomass over noble metal catalysts by isotopic tracing and NMR monitoring

One of the key challenges in studying the upgrading processes for the conversion of biomass is developing an understanding of the underlying conversion mechanism at the atomic scale. This study proposed an innovative high pressure in situ NMR monitoring approach for an isotopic traced upgrading process, which demonstrated a powerful capability to identify key products and provide insights into the reaction structure. The investigations for ring opening of two basic model compounds – methylcyclopentane (MCP) and cyclohexane (CH) on Ir, Pt, Ru and Pd/γ-Al 2 O 3 at 55 and 110 °C have been accomplished. For the study performed at 110 °C on Ir, Pt and Ru catalysts, the trend of H/D exchange rates were clearly dependent on the position on the ring with the highest exchange rate for the unhindered (or open side) and the lowest rate with the methyl group. However, Pd could perform almost equally efficient H/D exchanges for all sides, which may indicate that the “turnover” reactions could also occur on Pd. For both MCP and CH, Ru performed the most efficient H/D exchanges (C–H bond activation), and ring opened products were only observed with the Ru catalyst at 110 °C suggesting it is the most promising ring opening catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An alkali-free method to manufacture ramie fiber

Ramie is one of the most significant fiber resources and it needs the degumming process to produce fibers. The traditional manufacturing process of ramie fibers requires a large amount of alkali, which causes serious environmental issues. This paper presents a novel path to manufacture ramie fibers without alkali. In this study, ramie bast was pretreated by steam explosion and then treated with deep eutectic solvent. The properties of ramie fibers prepared by the novel alkali-free method, including physical properties, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD), were compared with that produced by the traditional alkali process. Results showed that the fiber qualities, including residual gum content (4.68%), average fiber fineness (1419.99 N m ) and breaking tenacity (5.98 cN/dtex), were comparable with the traditional alkali process, which all meet the requirement of the relevant Chinese National Standards. The FTIR, SEM and XRD results all confirmed the degumming ability of the novel method to manufacture ramie fibers. Furthermore, the novel method was proved to be eco-friendly. Taken together, these data indicate that the novel alkali-free method is green and effective in manufacturing ramie fibers.

42 ENGINEERING↗

A sustainability framework for assessing studies about marginal lands for planting perennial energy crops

One of the issues with large-scale perennial energy crop production is increasing land use competition between ‘food and feed’ and ‘fuel’. A commonly suggested solution is to limit energy crop plantation to marginal lands. However, the concept and the methods used to assess marginal lands remain vague and inconsistent across bioenergy-related studies. In this work, we propose a sustainability-based framework to review and classify studies for marginal lands used for bioenergy crops. This framework innovatively puts the marginal land in a sustainability-based framework, showing the interaction of biophysical, socioeconomic, qualitative, and quantitative assessments. We found that current studies lack integration of biophysical and socioeconomic considerations in the marginal land analysis. They also lack qualitative approaches to assess marginal land. Lastly, we suggest that future work should emphasize integrating biophysical, socioeconomic, quantitative, and qualitative analysis for sustainable marginal land identification and use.

09 BIOMASS FUELS↗

Dichotomy between frustrated local spins and conjugated electrons in a two-dimensional metal–organic framework

Dichotomy between local spins and conjugated electrons spawns various exotic physical phenomena, however, it has mostly been reported in three-dimensional (3D) inorganic systems. We demonstrate, for the first time, that a rare 2D metal–organic framework exhibits intriguing dichotomy behavior, which can be directly identified through scanning tunneling microscopy/spectroscopy (STM/STS). In a newly synthesized Cu-hexaiminobenzene [Cu 3 (HAB) 2 ], on the one hand, the Cu 2+ ions form an ideal S –1/2 antiferromagnetic (AFM) kagome lattice; on the other hand, the conjugated-electrons from the organic ligands produce a frustrated π x , y model on a honeycomb lattice, giving rise to completely dispersionless energy bands around the Fermi level that favour the ferromagnetic (FM) state. Remarkably, the frustrated local spins and conjugated electrons interact through a strong FM Hund's coupling, giving rise to a wide range of intriguing quantum phases. Furthermore, we propose that this dichotomy can be directly characterized through STM/STS measurements due to its special 2D nature, which provides a unique exciting platform to investigate the dichotomy of frustrated spins and electrons in a single lattice.

42 ENGINEERING↗

Dry Sliding Wear Behavior of Hot-Dip Aluminized Ti-6Al-4V Alloy as a Function of Sliding Velocity

An aluminized coating was prepared on Ti-6Al-4V alloy by hot-dip aluminizing and subsequently diffusion treatment. Dry sliding wear tests were performed for the aluminized and uncoated Ti-6Al-4V alloy under the loads of 10-50 N at the sliding velocities of 0.5-4 m/s. The wear resistance of the titanium alloy was improved by the aluminized coating under various conditions, especially at 4 m/s. The improved wear performance was suggested to be attributed to the Ti-Al coating and tribo-oxide layer. Tribo-layers were identified to form on worn surfaces under various conditions but their influence on the wear behavior and mechanism was decided by the amount and kind of oxides. The outmost values of the microhardness distribution at subsurfaces as a function of load could be used to identify the property and stability of tribo-layers. At 4 m/s, oxide-containing tribo-layers (more TiO, TiO{sub 2} and trace Fe{sub 2}O{sub 3}) presented high hardness and stability, thus possessed an obvious wear-reduced function. Conversely at 2.68 m/s, no-oxide tribo-layers did not show the protection from wear because of their lower hardness and instability. The formation of tribo-layers under various sliding speeds was noticed to be a process including wear debris production, oxidation and accumulation and densification, even sintering.

36 MATERIALS SCIENCE↗

Reduced Free Energy Perturbation/Hamiltonian Replica Exchange Molecular Dynamics Method with Unbiased Alchemical Thermodynamic Axis

We report that replica-exchange molecular dynamics (REMD) has been proven to efficiently improve the convergence of free energy perturbation (FEP) calculations involving considerable reorganization of their surrounding. We previously introduced the FEP/(λ,H)-REMD algorithm for ligand binding, in which replicas along the alchemical thermodynamic coupling axis λ were expanded as a series of Hamiltonian boosted replicas along a second axis to form a two-dimensional (2D) replica-exchange exchange map [Jiang, W.; Roux, B., J. Chem. Theory Comput. 2010, 6 (9), 2559-2565]. Aiming to achieve a similar performance at a lower computational cost, we propose here a modified version of this algorithm in which only the end-states along the alchemical axis are augmented by boosted replicas. The reduced FEP/(λ,H)-REMD method with one-dimensional (1D) unbiased alchemical thermodynamic coupling axis λ is implemented on the basis of generic multiple copy algorithm (MCA) module of the biomolecular simulation program NAMD. The flexible MCA framework of NAMD enables a user to design customized replica-exchange patterns through Tcl scripting in the context of a highly parallelized simulation program without touching the source code. Two Hamiltonian tempering boosting scheme were examined with the new algorithm: a first one based on potential energy rescaling of a pre-identified “solute”, and a second one via the introduction of flattening torsional free energy barriers. As two illustrative examples with reliable experiment data, the absolute binding free energies of pxylene and n-butylbenzene to the nonpolar cavity of the L99A mutant of T4 lysozyme were calculated. Lastly, the tests demonstrate that the new protocol efficiently enhances the sampling of torsional motions for backbone and side chains around the binding pocket and accelerates the convergence of the free energy computations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

GALNT3 inhibits NF-κB signaling during influenza A virus infection

Highlights: • A direct role of GANLT3 in regulating host responses during IAV infection. • First report that GALNT3 inhibits NF-κB signaling by preventing the translocation of p-P65 into nucleus. • Reveal the direct involvement of GALNT3 during viral infections. Protein glycosylation, attaching glycans covalently onto amino acid side chains of protein by various glycosyltransferase, is the most common post-translational modification. The UDP-GalNAc transferase 3 (GANLT3), encoded by Galnt3, transfers N-acetyl-d-galactosamine to hydroxyl groups of the side chains of Ser/Thr residues, initiating mucin type O-glycosylation of proteins. Most researches as yet focus on the involvement and abnormal expression of GALNT3 in various tumors. In this study, we found that GALNT3 was significantly decreased in the lungs after influenza A virus (IAV) infection in mice. Overexpression of GALNT3 in cell lines markedly inhibited IAV replication. Further experiments demonstrated that GALNT3 inhibited NF-κB signaling by preventing the translocation of phosphorylated P65 into nucleus. Therefore, our results reveal an important role of GALNT3 in regulating host responses during IAV infection, indicating the broad functions of the GALNT family, and the direct involvement of GALNTs during viral infections.

60 APPLIED LIFE SCIENCES↗

Isolation and characterization of cellulosic fibers from kenaf bast using steam explosion and Fenton oxidation treatment

Degumming is the dominant method to isolate cellulosic fibers in the textile industry. High content of lignin is the principle obstacle in bast-fibers degumming. In this study, in order to remove lignin efficiently, the treatment using steam explosion coupled with Fenton oxidation was conducted on kenaf bast. The influence and mechanism of the combined treatment of steam explosion and Fenton oxidation were studied. Fiber microstructure, composition proportion and distribution, cellulose Segal crystallinity and polymerization as well as residual lignin structure were analyzed. The results showed that the pretreatment of steam explosion could sufficiently extract most of the hemicellulose from kenaf bast. Also, the Fenton oxidation followed by alkaline boiling could effectively remove the lignin from the fiber, especially from the fiber surface. The refined dry fibers produced only remained 8.82% of hemicellulose and 9.36% of lignin. And the whole treatment process didn’t change the cellulose crystalline structure but could gradually degrade hemicellulose, lignin and other amorphous gummy matter as well as disordered areas in cellulose, leading to the increase of fiber Segal crystallinity from 62.02 to 70.12%. Part of cellulose was damaged with the increase of degumming intensity, resulting in the decrease of the polymerization degree of cellulose. Meanwhile, the structure of residual lignin changed during the degumming stages of steam explosion, Fenton oxidation and alkaline boiling. In conclusion, all the results revealed that the treatment of combined steam explosion and Fenton oxidation is significantly effectual for isolating bast-fibers.

36 MATERIALS SCIENCE↗

A green degumming process of ramie

Ramie provides the longest and strongest natural fiber in textile industry, but its traditional degumming process is costly and requires a large amount of alkali, which causes serious environmental concerns. In this study, a steam explosion (STEX) treatment followed by sodium percarbonate (SP) soak degumming process was investigated. Microstructure, chemical composition and mechanical properties of the refined ramie fibers were comprehensively characterized. The residual gum content was below 5%, the fineness was higher than 1600 Nm (6.25 dtex), the breaking tenacity was 5.4 cN/dex, and the whiteness was above 50%. All of the properties met the requirements of Chinese national standard, and the breaking tenacity and whiteness were notably better than those of the fibers degummed traditionally. Additionally, environmental impacts of the new degumming process were evaluated. Only 50% chemicals were needed for the new process, and chemical oxygen demand (COD) of the waste reduced to 35% of the traditional method. Therefore, the new method was more environment-friendly and economically feasible. It has great potential for industry applications.

36 MATERIALS SCIENCE↗

Hydrogen Embrittlement Susceptibility and Safety Control of Reheated CGHAZ in X80 Welded Pipeline

Coarse-grained heat-affected zone (CGHAZ) exhibits the highest hydrogen embrittlement (HE) susceptibility, which changes under the influence of thermal cycle. In this study, slow strain rate tension (SSRT) tests were conducted to investigate the HE susceptibility of reheated CGHAZs and the critical hydrogen pressure for fracture failure. Results show that intercritically reheated CGHAZ (ICCGHAZ) possesses the lowest HE resistance. Analyses of HE index and fracture indicate that the critical hydrogen pressure is 3.5 MPa. Microstructure analysis reveals that HE susceptibility is associated with multiple factors, such as phase composition, grain coarsening, HAB density, and MA constituent. Blocky necklace-like MA constituent along prior austenite boundaries plays a predominant role in intensifying the HE susceptibility of ICCGHAZ.

36 MATERIALS SCIENCE↗