Engineering Papers⌕ Search

Engineering topics

Jiang, Wei

Publications and source records attributed to Jiang, Wei.

At least 55 records · Page 3

Synergistic effect of dual Brønsted acidic deep eutectic solvents for oxidative desulfurization of diesel fuel

Deep eutectic solvents (DESs) are generally used as attractive solvents or extractants rather than catalysts in the field of synthesis and separation. Herein, dual Brønsted acidic DESs were prepared by mixing sulfonated quaternary ammonium and oxalic acid as extractants and catalysts for deep oxidative desulfurization. Compared to the DESs with single acidic group, the dual acidic DESs exhibited much higher catalytic activity likely due to the synergistic effect. The 1 H NMR study indicated that the weak interaction between DES and sulfur compounds led to a low extraction capacity. However, the sulfur removal could reach 97.7% under optimized reaction conditions. Density functional theory (DFT) calculations demonstrated that sulfonic group and carboxylic group are of equal importance to desulfurization performance. Further, the desulfurization efficiency was also strongly affected by the viscosity of DESs. Here, we put forward a new strategy that the reaction time could be sharply shortened to 40 min and 100 min by adding low viscous acetonitrile and polyethylene glycol into DES to form mixing reaction system, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Krypton-81 dating of the deep Continental Intercalaire aquifer with implications for chlorine-36 dating

Deep groundwater samples from the Continental Intercalaire (CI) aquifer in the Northern Tunisian Sahara have been analyzed for noble gases 3 He, 4 He, Ne and 81 Kr, and for 14 C to better constrain the groundwater residence time of this large transboundary aquifer. Its significant radiogenic 4 He content and background-level 14 C both indicate water older than a few tens of thousands of years. Distinct helium concentrations and Ne/He ratios suggest different groundwater flow paths through the Tozeur and Kebili regions. 81 Kr is applied for the first time on the CI aquifer, providing more direct evidence for the presence of old groundwater with 81 Kr/Kr ratios at 63% – 15% of the atmospheric value, corresponding to residence times of 150 – 630 ka. These newly obtained 81 Kr ages enable a re-evaluation of the previously reported data from the Tozeur region in order to better constrain the input values of 36 Cl/Cl and Cl. The initial 36 Cl/Cl ratio is found to be 4 – 6 times larger than previously assumed, and the initial Cl concentration 6 – 15 times smaller. The results of 81 Kr dating and the recalibrated 36 Cl dating define an eastward age progression across > 500 km of flow path from the Algerian to Tunisian sections. Here, this study exemplifies the utility of 81 Kr not only as an independent and conservative chronometer, but also as a supplemental measurement to better calibrate the parameters required for other age tracers, including cosmogenic 36 Cl and radiogenic 4 He.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-step route to size and shape controlled gibbsite nanoplates and the crystal growth mechanism

Mastery of gibbsite (α-Al(OH) 3 ) nucleation and crystal growth is significant in fundamental aluminum chemistry and also beneficial for industrial applications and the remediation of nuclear waste. Herein, we developed an additive-free two-step route to size and morphology controlled synthesis of gibbsite nanoplates. Independent temperature manipulation of nucleation and crystal growth regimes was used to control the efficacy and yield of the process, producing gibbsite nanoplates with tunable morphologies and sizes. We achieve morphologies ranging from hexagon, pseudo hexagon, truncated triangle to rhombic, and average basal plane diameters from 120 to 850 nm, with thicknesses between 8 and 45 nm. Analysis of gibbsite structure, size and morphology with techniques including powder X-ray diffraction (p-XRD), 27 Al magic angle spinning nuclear magnetic resonance spectroscopy (MAS NMR), scanning electron microscopy (SEM), and atomic force microscopy (AFM) provided key details on the nucleation and crystal growth mechanisms. The results indicate the temperature of the nucleation aging step is the most important factor controlling the final particle size. Particularly small nanoplates were obtained with a low nucleation aging temperature followed by high crystal growth temperature, suggesting that gibbsite growth can be approximated via a LaMer-type burst nucleation and crystal growth mechanism. Scalability was demonstrated by triplicate of 2 L experiments which prepared gibbsite nanoplates of ~200 nm size and with an average yield of ~55% after 84 h. Compared to existing techniques, this improved two-step route is cheaper, more efficient and environmentally friendly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of a passively Q-switched Raman laser at 1176 nm with Nd{sup 3+}:YAG/Cr{sup 4+}:YAG/YAG composite crystal and a coupled cavity

To reduce the thermal lens effect and increase the efficiency, a composite crystal of Nd{sup 3+}:YAG/Cr{sup 4+}:YAG/YAG and a coupled cavity structure were employed in our passively Q-switched YVO{sub 4}-based Raman laser system. Both the simulation and the experiment results showed that the undoped YAG crystal bonded in the end-face of Cr{sup 4+}:YAG crystal can speed up the heat transfer of Cr{sup 4+}:YAG crystal and reduce the temperature difference between its side surfaces and the center significantly, and the coupled cavity structure can improve the laser performance, especially at high pump power. The maximum output power of Raman laser of 0.92 W at 1176 nm was obtained with an optical-to-optical efficiency of 11.51%. The corresponding repetition rate and the pulse width is 53.5 kHz and 3.22 ns, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rapid gas-assisted exfoliation promises V 2 O 5 nanosheets for high performance lithium-sulfur batteries

Scalable synthesis of ultra-thin two-dimensional (2D) nanomaterials by exfoliation has emerged as an intriguing approach in the energy field. In this work, a rapid thermal expansion-triggered gas-assisted exfoliation method is applied to synthesize ultra-thin 2D V 2 O 5 nanosheets. Unlike other methods, no impurities can be introduced during exfoliation, leading extremely clean 2D nanosheets that are crucial for the investigation of 2D materials in charge-storage fields. The obtained V 2 O 5 nanosheets were used as effective host materials for polysulfides in lithium-sulfur batteries, as they can help to confine and alleviate the shuttle of polysulfides efficiently. The as-prepared V 2 O 5 –S composite electrode delivered an initial discharge capacity of 1638.5 mAh g -1 with a high Coulombic efficiency of 96.7% and maintained a specific capacity of 838.8 mAh g -1 after 200 cycles at 0.1 C current rate. This work supplies a facile approach to obtain transition metal oxides nanosheets, which have potential applications in energy storage and conversion fields.

25 ENERGY STORAGE↗

String Method for Protein–Protein Binding Free-Energy Calculations

A powerful computational strategy to determine the equilibrium association constant of two macromolecules with explicit-solvent molecular dynamics (MD) simulations is the "geometric route", which considers the reversible physical separation of the bound complex in solution. Nonetheless, multiple challenges remain to render this type of methodology reliable and computationally efficient in practice. In particular, in one, formulation of the geometric route relies on the potential of mean force (PMF) for physically separating the two binding partners restrained along a straight axis, which must be selected prior to the calculation. However, practical applications indicate that the calculation of the separation PMF along the predefined rectilinear pathway may be suboptimal and slowly convergent. Recognizing that a rectilinear straight separation pathway is generally not representative of how the protein complex physically separates in solution, we put forth a novel theoretical framework for binding free-energy calculations, leaning on the optimal curvilinear minimum free-energy path (MFEP) determined from the string method. The proposed formalism is validated by comparing the results obtained using both rectilinear and curvilinear pathways for a prototypical host-guest complex formed by cucurbit[7]uril (CB[7]) binding benzene, and for the barnase-barstar protein complex. On the basis of multi-microsecond MD calculations, we find that the calculations following the traditional rectilinear pathway and the string-based curvilinear pathway agree quantitatively, but convergence is faster with the latter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Comprehensive Characterization of Pyrolysis Oil from Softwood Barks

Pyrolysis of raw pine bark, pine, and Douglas-Fir bark was examined. The pyrolysis oil yields of raw pine bark, pine, and Douglas-Fir bark at 500 °C were 29.18%, 26.67%, and 26.65%, respectively. Both energy densification ratios (1.32–1.56) and energy yields (48.40–54.31%) of char are higher than pyrolysis oils (energy densification ratios: 1.13–1.19, energy yields: 30.16–34.42%). The pyrolysis oils have higher heating values (~25 MJ/kg) than bio-oils (~20 MJ/kg) from wood and agricultural residues, and the higher heating values of char (~31 MJ/kg) are comparable to that of many commercial coals. The elemental analysis indicated that the lower O/C value and higher H/C value represent a more valuable source of energy for pyrolysis oils than biomass. The nuclear magnetic resonance results demonstrated that the most abundant hydroxyl groups of pyrolysis oil are aliphatic OH groups, catechol, guaiacol, and p-hydroxy-phenyl OH groups. The aliphatic OH groups are mainly derived from the cleavage of cellulose glycosidic bonds, while the catechol, guaiacol, and p-hydroxy-phenyl OH groups are mostly attributed to the cleavage of the lignin β–O-4 bond. Significant amount of aromatic carbon (~40%) in pyrolysis oils is obtained from tannin and lignin components and the aromatic C–O bonds may be formed by a radical reaction between the aromatic and aliphatic hydroxyl groups. In this study, a comprehensive analytical method was developed to fully understand and evaluate the pyrolysis products produced from softwood barks, which could offer valuable information on the pyrolysis mechanism of biomass and promote better utilization of pyrolysis products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computing Relative Binding Affinity of Ligands to Receptor: An Effective Hybrid Single-Dual-Topology Free-Energy Perturbation Approach in NAMD

An effective hybrid single-dual-topology protocol is designed for the calculation of relative binding affinities of small ligands to a receptor. The protocol was developed as an extension of the NAMD molecular dynamics program, which exclusively supports a dual-topology framework for relative alchemical free-energy perturbation (FEP) calculations. Here, the alchemical end states are represented as two separate molecules sharing a common substructure identified through maximum structural mapping. Within the substructure, an atom-to-atom correspondence is established, and each pair of corresponding atoms is holonomically constrained to share identical coordinates at all time throughout the simulation. The forces are projected and combined at each step for propagation. Following this formulation, a set of illustrative calculations of reliable experiment/simulation data, including relative solvation free energies of small molecules and relative binding affinities of drug compounds to proteins, are presented. To enhance sampling of the dual-topology region, the FEP calculations were carried out within a replica-exchange MD scheme supported by the multiple-copy algorithm module of NAMD, with periodically attempted swapping of the thermodynamic coupling parameter lambda between neighboring states. The findings are consistent with experiments and benchmarks reported in the literature, lending support to the validity of the current protocol. In summary, this hybrid single-dual-topology approach combines the conceptual simplicity of the dual-topology paradigm with the advantageous sampling efficiency of the single-topology method, making it an ideal strategy for high-throughput in silico drug design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Utilization of deep eutectic solvent as a degumming protocol for Apocynum venetum bast

Deep eutectic solvent (DES) pretreatment coupled with alkaline degumming on Apocynum venetum bast was studied for developing an eco-friendly and effective degumming method. Here, a 1:2 mixture of choline chloride and urea was used in a microwave-assisted DES pretreatment optimized to 60 min and 110 °C. The impact of the deep eutectic solvent pretreatment on the properties of produced semi-degummed and refined dry fibers were assessed by examining the fiber chemical composition, surface microstructure, cellulose crystallinity, degree of polymerization, and fiber thermal properties. The combined DES and alkaline degumming treatment effectively removed the gummy matter including hemicellulose and lignin from the A. venetum bast, providing a smooth and clean fiber surface. This combined DES and alkaline degumming treatment also shows the ability to extract amorphous cellulose, leading to an increase of fiber crystallinity and a decrease of the average cellulose molecular weight. The thermal stability of the fibers was improved significantly after the degumming treatment. The refined dry fibers produced by this combined DES-alkaline treatment exhibited comparable chemical and physical properties (e.g. residual gum content, fiber length, fiber fineness, breaking tenacity) compared with traditionally alkali degumming method. These results revealed that DES is a practical and feasible pretreatment protocol for A. venetum bast degumming.

59 BASIC BIOLOGICAL SCIENCES↗

Radiokrypton unveils dual moisture sources of a deep desert aquifer

We report that in arid regions, groundwater is a vital resource that can also provide a long-term record of the regional water cycle. However, the use of groundwater as a paleoclimate proxy has been limited by the complex hydrology and the lack of appropriate chronometers to determine the recharge time without complication. Applying 81 Kr, a long-lived radioisotope tracer, we investigate the paleohydroclimate and subsurface water storage properties of the Nubian Sandstone Aquifer in the Negev Desert, Israel. Based on the spatial distributions of stable isotopes and the abundance of 81 Kr, we resolve subsurface mixing and identify two distinct moisture sources of the recharge: one recent (<38 ky ago) from the Mediterranean and the other 361 ± 30 ky ago from the tropical Atlantic, both of which occurred under conditions of low orbital eccentricity comparable to that of the present. The recent recharge provided by the moisture from Mediterranean cyclones can be attributed to the southward shift of the storm track during the Last Glacial Maximum, and the earlier recharge can be attributed to moisture from the Atlantic delivered as tropical plumes under a climate colder than the present. Furthermore, the residence time of the latter reveals that tectonically active terrain can store groundwater for an unexpectedly long period, likely due to strongly attenuated groundwater flow across the fault zones. Lastly with this tracer, groundwater can now serve as a direct record of paleoprecipitation over land and of subsurface water storage from the mid-Pleistocene and onward.

58 GEOSCIENCES↗

Preparation and Characterization of Microcellulose and Nanocellulose Fibers from Artemisia Vulgaris Bast

Artemisia vulgaris is an economic plant that is spreading widely in central China. Its unused bast generates a large amount of biomass waste annually. Utilizing the fibers in Artemisia vulgaris bast may provide a new solution to this problem. This research attempts to strengthen the understanding of Artemisia vulgaris by analyzing its fiber compositions and preparing micro- and nano-cellulose fibers, which can be used as raw materials for composites. In this work, Artemisia vulgaris bast powder (AP) and microcellulose and nanocellulose fibers (AMFs and ANFs) were produced and characterized by optical microscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TG), and bacteriostatic test. The results indicated that cellulose, hemicellulose, and lignin were the main components in the Artemisia vulgaris bast. The cellulose content reached 40.9%. The Artemisia vulgaris single fibers were microcellulose fibers with an average length of 850.6 μm and a diameter of 14.4 μm. Moreover, the AMF had considerable antibacterial ability with an antibacterial ratio of 36.6%. The ANF showed a length range of 250–300 nm and a diameter of 10–20 nm, and it had a higher crystallinity (76%) and a lower thermal stability (initial degradation temperature of 183 °C) compared with raw ANF (233 °C). This study provides fundamental information on Artemisia vulgaris bast cellulose for its subsequent utilization.

59 BASIC BIOLOGICAL SCIENCES↗

Guiding light in bent waveguide superlattices with low crosstalk

Waveguide superlattices with a subwavelength pitch and low crosstalk can significantly increase the waveguide integration density and are beneficial for many chip-scale applications. Bending of such high-density waveguide superlattices is necessary for flexible signal routing. However, tight bending tends to induce high crosstalk between guided modes, as witnessed in multimode waveguide bends. Here we explore the mechanisms of light guiding and coupling in a subwavelength-pitch waveguide superlattice bend and analyze how bending further modifies the already “renormalized” parameters of superlattice modes via various physical effects. Particularly, bending can skew the phase mismatch in a waveguide superlattice, sometimes producing a near phase-matching condition and causing salient crosstalk spikes among non-first-nearest neighbors. Interestingly, a waveguide superlattice with less pristine phase mismatch may be more robust against such skew of phase mismatch and can suppress crosstalk spikes by ~10 dB. Bending with 5–15 μm radii and subwavelength pitches has been demonstrated with crosstalk lower than -19.5 dB. The scaling of the footprint of waveguide superlattice bending is analyzed, and significant footprint reduction can be achieved for chip-scale applications. The rationale for footprint reduction of superlattice bending under crosstalk constraint differs markedly from that of a single waveguide bend.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modeling spatial dependence and economic hotspots in landowners’ willingness to supply bioenergy crops in the northeastern United States

This paper investigates the spatial heterogeneity of landowners’ willingness to supply three bioenergy crops: switchgrass, Miscanthus , and willow, in the northeastern United States. Spatial heterogeneity might arise for several reasons. For example, landowners closer to bioenergy processing plants might be more likely to be willing to supply bioenergy crops, and landowners who are more willing to supply bioenergy crops may be spatially clustered because they share similar land attributes, demographics, experiences, and/or values. Using high–resolution GIS data related to the location of pellet plants utilizing bioenergy crops and survey data related to landowners’ characteristics including spatial location, we estimate a spatial probit model to explain the variation in individual–specific reservation prices (RPs)—the feedstock price at which landowners become willing to supply a bioenergy crop. We find that respondents’ RP is lower the closer they live to their nearest pellet plant and spatial dependency is only present for switchgrass supply. We also identify three economic hotspots (areas with high potential supply and low RPs) for each bioenergy crop. We believe that bioenergy supply chains could be developed around these hotspots.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Kagome bands disguised in a coloring-triangle lattice

The kagome bands hosting exotic quantum phases generally and understandably pertain only to a kagome lattice. This has severely hampered the research of kagome physics due to the lack of real kagome-lattice materials. Interestingly, we discover that a coloring-triangle (CT) lattice, named after color-triangle tiling, also hosts kagome bands. We demonstrate first theoretically the equivalency between the kagome and CT lattices, and then computationally in photonic (waveguide lattice) and electronic (Au overlayer on electride Ca 2 N surface) systems by first-principles calculations. The theory can be generalized to even distorted kagome and CT lattices to exhibit ideal kagome bands. Furthermore, our findings open an avenue to explore the alluding kagome physics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗