Engineering topics

Jensen, Brian J.

Publications and source records attributed to Jensen, Brian J..

77 records · Page 5

NASA NTRS1991

Crystalline Imide/Arylene Ether Copolymers

Series of imide/arylene ether block copolymers prepared by using arylene ether blocks to impart low melt viscosity, and imide blocks to provide high strength and other desirable mechanical properties. Work represents extension of LAR-14159 on imide/arylene ether copolymers in form of films, moldings, adhesives, and composite matrices. Copolymers potentially useful in variety of high-temperature aerospace and microelectronic applications.

Jensen, Brian J.↗

NASA NTRS1991

Effect of molecular weight on polyphenylquinoxaline properties

A series of polyphenyl quinoxalines with different molecular weight and end-groups were prepared by varying monomer stoichiometry. Thus, 4,4'-oxydibenzil and 3,3'-diaminobenzidine were reacted in a 50/50 mixture of m-cresol and xylenes. Reaction concentration, temperature, and stir rate were studied and found to have an effect on polymer properties. Number and weight average molecular weights were determined and correlated well with viscosity data. Glass transition temperatures were determined and found to vary with molecular weight and end-groups. Mechanical properties of films from polymers with different molecular weights were essentially identical at room temperature but showed significant differences at 232 C. Diamine terminated polymers were found to be much less thermooxidatively stable than benzil terminated polymers when aged at 316 C even though dynamic thermogravimetric analysis revealed only slight differences. Lower molecular weight polymers exhibited better processability than higher molecular weight polymers.

Jensen, Brian J.↗

NASA NTRS1991

LaRC-ITPI/arylene ether copolymers

As part of an effort to develop high performance structural resins for aerospace applications, work has continued on block copolymers containing imide and arylene ether segments. The arylene ether block used in this study contains a bulky fluorene group in the polymer backbone while the imide block contains an arylene ketone segment similar to that in the arylene ether block and has been named LaRC-ITPI. A series of imide/arylene ether block and segmented copolymers were prepared and characterized. Films were prepared from these copolymers and mechanical properties were measured.

Jensen, Brian J.↗

NASA NTRS1991

Thermal characterization and toughness of ethynyl containing blends

As part of an effort to develop high performance structural resins with an attractive combination of properties for aerospace applications, a series of ethynyl-terminated polysulfones of different molecular weights were prepared and blended with a low molecular weight ethynyl-terminated coreactant. Upon heating above 200 C, these ethynyl containing materials react to form a chain extended and crosslinked network structure. This reaction renders the materials insoluble in common solvents, but also reduces the toughness as compared to high molecular weight linear polysulfones. The thermal characterization of these blends and the toughness of the resulting cured materials are discussed.

Jensen, Brian J.↗

NASA NTRS1988

Polyarylene Ethers With Improved Properties

Series of new polyarylene ethers (PAE's) prepared from reaction of activated dihalo compounds with various bisphenols. Compounds exhibit excellent processability by compression molding, plus good mechanical properties. All PAE's prepared suitable for use as adhesives, coatings, films, membranes, and composite matrices. Potentially useful for spacecraft and aircraft applications.

Hergenrother, Paul M.↗