Engineering Papers⌕ Search

Engineering topics

James H Stephenson

Publications and source records attributed to James H Stephenson.

7 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Noise Abatement Flight Test Data Report

An acoustic flight test of six helicopters conducted by NASA, FAA, and the US Army is described. Microphone arrays were used to collect acoustic data for source noise characterization, to investigate the acoustic impacts of maneuvering flight, and to develop and evaluate noise abatement operations for helicopters on approach. Atmospheric data and vehicle state data were also collected. Noise metrics are calculated and plotted for all conditions tested. All data described are publicly available upon request.

Rotorcraft↗
NASA NTRSDate not supplied

Acoustic Flight Test of the Joby Aviation Advanced Air Mobility Prototype Vehicle

An extensive acoustic flight test was performed on the Joby Aviation pre-production all-electric vertical takeoff and landing prototype. With the design intent of carrying a pilot and four passengers a maximum range of 150 miles, this vehicle utilizes distributed propulsion and vectored thrust via six tilting propellers. As part of the Advanced Air Mobility (AAM) National Campaign, this is the first full-scale AAM aircraft tested by NASA over representative conditions for all phases of a typical mission profile. A 58- channel distributed microphone array was used to acquire acoustic measurements on more than 100 test points (31 unique conditions). The measurements were postprocessed with synchronously sampled vehicle position and state data to form ground noise contours of departures and approaches at various flight path angles and accelerations. Comparing ground areas of 75 dBA isolines, approaches consistently exhibit higher noise levels rela- tive to departures. Directivity maps were generated for constant airspeed level flyovers. Examples comparing the differences in a semi-thrust borne and full wing-borne mode are given, with full wing-borne mode representing the quietest phase of the flight envelope tested. Measurements for hover in and out of ground effect are given and found to have 2 to 5 dB variation over a single run, and more significant variation between back-to-back runs. Finally, initial analysis of acoustic symmetry about the longitudinal vehicle axis and repeatability over several test days are presented.

Acoustics↗
NASA NTRSDate not supplied

Multilevel Probit Regression for 3-Alternative Forced Choice Audibility Testing

A recent psychoacoustic test at NASA Langley generated a dataset of 3-alternative forced-choice responses for 40 subjects that measured the audibility of a tone complex in a shaped broadband masker. The task was completed by 4 subjects at a time in a small theatre-like environment using predetermined stimuli levels. These data were subject to 4 forms of probit regression: a “complete pooling” analysis in which all data from the test was fit with one curve, two forms of “no pooling” analyses in which subjects’ data were treated individually (using both packaged and custom software), and a “partial pooling” analysis in which multilevel-regression software fit both individual curves as well as population-level parameters at the same time. The results of the analyses are compared in terms of both individual- and population-level parameters. Partial pooling appears to give the most consistent results at both levels, as well as provide the most robustness among the packaged approaches (albeit with added complexity over single-level regression). These results are also contained in a recent NASA technical memorandum entitled “Comparisons of Analysis Methods Applied to Alternative Forced Choice Audibility Data.”

Psychoacoustics↗
NASA NTRSDate not supplied

Evaluation of Acoustic Propagation in Layered Media Using Wave Confinement

A comprehensive method for propagation of sound in layered media is discussed that involves dividing the domain into two regions, source field and far field. The source field is provided using experimentally collected data from full-scale rotorcraft acoustic flight tests, which consists of short waveforms that cannot be directly simulated on the grid without numerical errors. Instead, grid based computational waves are used to carry the details of these waveforms, including amplitude, arrival time and location of origin on source sphere. This is done by solving the scalar wave equation using the Wave Confinement (WC) method, which involves adding an extra term to produce converged solutions. WC is used to study wave propagation in two different atmospheric conditions, and the results are compared to the flight test data. Overall, WC can accurately capture the propagation effects and there is a good agreement with the flight test data.

rotorcraft acoustics↗
NASA NTRSDate not supplied

Evaluation of Acoustic Propagation in Layered Media Using Wave Confinement

A comprehensive method for propagation of sound in layered media is discussed that involves dividing the domain into two regions, source field and far field. The source field is provided using experimentally collected data from full-scale rotorcraft acoustic flight tests, which consists of short waveforms that cannot be directly simulated on the grid without numerical errors. Instead, grid based computational waves are used to carry the details of these waveforms, including amplitude, arrival time and location of origin on source sphere. This is done by solving the scalar wave equation using the Wave Confinement (WC) method, which involves adding an extra term to produce converged solutions. WC is used to study wave propagation in two different atmospheric conditions, and the results are compared to the flight test data. Overall, WC can accurately capture the propagation effects and there is a good agreement with the flight test data.

rotorcraft acoustics↗
NASA NTRSDate not supplied

OverFlight: Graphical Flight Operations Planning

OverFlight is an in-development graphical user interface (GUI) that implements a state-of-the-art rotorcraft maneuvering noise model using a source noise hemisphere approach coupled with the Aircraft NOise Prediction Program 2 (ANOPP2). This GUI stems from a demand for easy-to-use mission planning and community impact acoustic tools that can model the maneuvering flight of a rotary-wing vehicle. This paper covers the models used for the development of OverFlight and model validation efforts. Data from a joint NASA/Army flight test of an MD530F aircraft are used both for source noise hemispheres as well as maneuvering flight data. Analysis of the predicted maneuvering noise shows better agreement that traditional methods currently employed, while also demonstrating maneuvers where the underlying assumptions fail to hold.

rotorcraft↗