Engineering topics

Huth, G. K.

Publications and source records attributed to Huth, G. K..

At least 37 records · Page 2

NASA NTRS1979

Orbiter CIU/IUS communications hardware evaluation

The DOD and NASA inertial upper stage communication system design, hardware specifications and interfaces were analyzed to determine their compatibility with the Orbiter payload communications equipment (Payload Interrogator, Payload Signal Processors, Communications Interface Unit, and the Orbiter operational communications equipment (the S-Band and Ku-band systems). Topics covered include (1) IUS/shuttle Orbiter communications interface definition; (2) Orbiter avionics equipment serving the IUS; (3) IUS communication equipment; (4) IUS/shuttle Orbiter RF links; (5) STDN/TDRS S-band related activities; and (6) communication interface unit/Orbiter interface issues. A test requirement plan overview is included.

Huth, G. K.↗

NASA NTRS1979

Orbiter CIU/IUS communications hardware evaluation

Inertial Upper Stage (IUS) and DoD Communication Interface Unit (CIU) communication system design, hardware specifications, and interfaces were evaluated to determine their compatibility with the Orbiter payload communication and data handling equipment and the Orbiter network communication equipment.

Huth, G. K.↗

NASA NTRS1979

Shuttle Ku-band and S-band communications implementations study

The interfaces between the Ku-band system and the TDRSS, between the S-band system and the TDRSS, GSTDN and SGLS networks, and between the S-band payload communication equipment and the other Orbiter avionic equipment were investigated. The principal activities reported are: (1) performance analysis of the payload narrowband bent-pipe through the Ku-band communication system; (2) performance evaluation of the TDRSS user constraints placed on the S-band and Ku-band communication systems; (3) assessment of the shuttle-unique S-band TDRSS ground station false lock susceptibility; (4) development of procedure to make S-band antenna measurements during orbital flight; (5) development of procedure to make RFI measurements during orbital flight to assess the performance degradation to the TDRSS S-band communication link; and (6) analysis of the payload interface integration problem areas.

Huth, G. K.↗

NASA NTRS1979

Inertial Upper Stage/Shuttle Orbiter communications

The Inertial Upper Stage (IUS) system is intended for DOD and NASA space vehicle (S/V) launches from the Shuttle Orbiter. Prior to and during the IUS launch, commands must be transmitted to the S/V and IUS and the telemetry data must be communicated to the Orbiter. This paper describes the communication links between the IUS and the Orbiter, with particular emphasis on the RF link equipment and performance. The transponder equipment carried on board the IUS system is also described.

Huth, G. K.↗

NASA NTRS1979

Spread spectrum techniques for the Space Shuttle

The Space Shuttle will employ spread spectrum techniques for both communication and navigation. During on-orbit phases of flight, two-way S-band and Ku-band communication links between the Shuttle and the ground will be available via the tracking and data relay satellite system (TDRSS). A pseudonoise (PN) code will spread the forward-link data spectrum from 32 kbps to 216 kbps to reduce the signal spectral density impinging on the earth's surface, with the S-band code search and acquisition being performed at C/NO-values of around 5 dB-Hz, and with a code length of 2047 chips at a rate of 11.232 Mchips/sec. C/NO-values in the region of 60 dB-Hz to 63 dB-Hz will characterize PN code acquisition in the Ku-band, whose forward-link PN clock is 3.03 Mchips/sec on a 1023-chip length sequence. Primary operational navigation will be provided by the Global Positioning System (GPS), which, after measuring transit time of the PN spread spectrum signal between a number of GPS satellites and itself, scales it by the velocity of light. GPS will enable position estimation accuracy to 30 feet and velocity estimation accuracy to 0.02 ft/sec.

Batson, B. H.↗

NASA NTRS1978

Spread spectrum acquisition and tracking performance for Shuttle communication links

The spread spectrum acquisition and tracking performance for the Shuttle S-band and Ku-band communication links are analyzed and compared to test results. The S-band link requirements are more severe than those of the Ku-band links, hence, different despreader designs were developed for the two systems. The S-band despreader acquires pseudonoise code lock by examining all possible code phases in half chip steps while the Ku-band despreader acquires pseudonoise code lock by continuously sweeping a tau-jitter loop. Both despreaders employ a tau-jitter loop for code tracking. The code tracking performance is computed for the tau-jitter loop and compared to that of the more complex delay lock loop.

Alem, W. K.↗

NASA NTRS1978

False lock performance of Shuttle Costas loop receivers

The false (sideband) lock problem in Shuttle Costas loop receivers, in the presence of noise, is assessed. False lock margin is defined depending on symbol signal-to-noise ratio rather than in the absence of noise. Closed-form results are given for the case where the arm filters of the Costas loop are one-pole Butterworth filters as used in the Shuttle receivers. However, the approach taken is also general enough to cover filters of arbitrary characteristics. As part of the development of the false lock margin, it is shown that the false lock phenomenon of the squaring loop is identical to that of the Costas loop.

Woo, K. T.↗

NASA NTRS1978

Integrated source and channel encoded digital communication system design study

The particular Ku-band carrier, PN despreading, and symbol synchronization strategies, which were selected for implementation in the Ku-band transponder aboard the orbiter, were assessed and evaluated from a systems performance viewpoint, verifying that system specifications were met. A study was performed of the design and implementation of tracking techniques which are suitable for incorporation into the Orbiter Ku-band communication system. Emphasis was placed on maximizing tracking accuracy and communication system flexibility while minimizing cost, weight, and system complexity of Orbiter and ground systems hardware. The payload communication study assessed the design and performance of the forward link and return link bent-pipe relay modes for attached and detached payloads. As part of this study, a design for a forward link bent-pipe was proposed which employs a residual carrier but which is tracked by the existing Costas loop.

Alem, W. K.↗

NASA NTRS1977

Integrated source and channel encoded digital communication system design study

The analysis of the forward link signal structure for the shuttle orbiter Ku-band communication system was carried out, based on the assumptions of a 3.03 Mcps PN code. It is shown that acquisition requirements for the forward link can be met at the acquisition threshold C/N0 sub 0 value of about 60 dB-Hz, which corresponds to a bit error rate (BER) of about 0.001. It is also shown that the tracking threshold for the forward link is at about 57 dB-Hz. The analysis of the bent pipe concept for the orbiter was carried out, along with the comparative analysis of the empirical data. The complexity of the analytical approach warrants further investigation to reconcile the empirical and theoretical results. Techniques for incorporating a text and graphics capability into the forward link data stream are considered and a baseline configuration is described.

Udalov, S.↗

NASA NTRS1977

Payload data processing for the Space Shuttle program

The paper examines communications and data handling services that the Space Shuttle will provide for payloads and discusses mission and data processing capabilities. Uses of these capabilities are considered, and the Orbiter data processing system is described. Functional scientific data interfaces for attached payloads and functional system status data interfaces for attached payloads are indicated.

Batson, B. H.↗

NASA NTRS1977

Shuttle Ku-band bent-pipe implementation considerations

This paper describes an approach for relay of data-modulated subcarriers from Shuttle payloads through the Shuttle Ku-band communications subsystem (and subsequently through a tracking and data relay satellite system to a ground terminal). The novelty is that a channel originally provided for baseband digital data is shown to be suitable for this purpose; the resulting transmission scheme is referred to as a narrowband bent-pipe scheme. Test results demonstrating the validity of the narrowband bent-pipe mode are presented, and limitations on system performance are described.

Batson, B. H.↗

NASA NTRS1976

Digital television system design study

The use of digital techniques for transmission of pictorial data is discussed for multi-frame images (television). Video signals are processed in a manner which includes quantization and coding such that they are separable from the noise introduced into the channel. The performance of digital television systems is determined by the nature of the processing techniques (i.e., whether the video signal itself or, instead, something related to the video signal is quantized and coded) and to the quantization and coding schemes employed.

Huth, G. K.↗

NASA NTRS1976

Integrated source and channel encoded digital communication system design study

The results of several studies Space Shuttle communication system are summarized. These tasks can be divided into the following categories: (1) phase multiplexing for two- and three-channel data transmission, (2) effects of phase noise on the performance of coherent communication links, (3) analysis of command system performance, (4) error correcting code tradeoffs, (5) signal detection and angular search procedure for the shuttle Ku-band communication system, and (6) false lock performance of Costas loop receivers.

Huth, G. K.↗

NASA NTRS1976

Study to investigate and evaluate means of optimizing the Ku-band communication function for the space shuttle

The forward link of the overall Ku-band communication system consists of the ground- TDRS-orbiter communication path. Because the last segment of the link is directed towards a relatively low orbiting shuttle, a PN code is used to reduce the spectral density. A method is presented for incorporating code acquisition and tracking functions into the orbiter's Ku-band receiver. Optimization of a three channel multiplexing technique is described. The importance of Costas loop parameters to provide false lock immunity for the receiver, and the advantage of using a sinusoidal subcarrier waveform, rather than square wave, are discussed.

Simon, M. K.↗

NASA NTRS1976

Convolutional coding at 50 Mbps for the Shuttle Ku-band return link

Error correcting coding is required for 50 Mbps data link from the Shuttle Orbiter through the Tracking and Data Relay Satellite System (TDRSS) to the ground because of severe power limitations. Convolutional coding has been chosen because the decoding algorithms (sequential and Viterbi) provide significant coding gains at the required bit error probability of one in 10 to the sixth power and can be implemented at 50 Mbps with moderate hardware. While a 50 Mbps sequential decoder has been built, the highest data rate achieved for a Viterbi decoder is 10 Mbps. Thus, five multiplexed 10 Mbps Viterbi decoders must be used to provide a 50 Mbps data rate. This paper discusses the tradeoffs which were considered when selecting the multiplexed Viterbi decoder approach for this application.

Batson, B. H.↗

NASA NTRS1975

Integrated source and channel encoded digital communication system design study

Various aspects of space shuttle communication systems were studied. The following major areas were investigated: burst error correction for shuttle command channels; performance optimization and design considerations for Costas receivers with and without bandpass limiting; experimental techniques for measuring low level spectral components of microwave signals; and potential modulation and coding techniques for the Ku-band return link. Results are presented.

Huth, G. K.↗

NASA NTRS1975

Digital speech processing for the Space Shuttle program

This paper describes the voice digitization technique which has been selected for the Space Shuttle program. The selected approach is compatible with a time-division multiplexing scheme which combines one or two digital voice channels with commands prior to transmission over an RF uplink or with telemetry prior to transmission over an RF downlink.

Batson, B. H.↗

NASA NTRS1974

Integrated source and channel encoded digital communication system design study

This study investigated the configuration and integration of a wideband communication system with a Ku-band rendezvous radar system. The goal of the study was to provide as much commonality between the two systems as possible. The antenna design was described with the only change being the requirement for dual polarization (linear for the radar system and circular for the communication system).

Huth, G. K.↗