Engineering Papers⌕ Search

Engineering topics

Huang, X.

Publications and source records attributed to Huang, X..

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A 40 Gbps Optical Transceiver for Particle Physics Experiments

We present the design and the test results of a quad-channel optical transceiver module (QTRx) possibly for future particle physics experiments. The transmitters of QTRx, each at 10 Gbps, are based on a Quad-channel VCSEL Diode array Driver (QLDD) and 1 x 4 VCSEL array. The receivers of QTRx, with data rates of 2.56 Gbps or 10 Gbps per channel, are based on a Quad-channel Trans-Impedance and limiting Amplifier (QTIA) and 1 x 4 photodiode array of GaAs or InGaAs. QTRx is 20 mm x 10 mm x 5 mm and couples to an MT fiber connector. Test results indicate that QTRx achieves the design goals with a power consumption of 124 mW per transmitter channel at 10 Gbps and 120 mW at 2.56 Gbps for the receiver channel with an on-chip charge pump. The sensitivities of QTIA are -17 dBm at 2.56 Gbps and -8 dBm at 10 Gbps, respectively. Further improvements with a gold-finger interface and a more compact optical lens are being designed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

In-pixel automatic threshold calibration for the CMS Endcap Timing Layer readout chip

We present the implementation and verification of an in-pixel automatic threshold calibration circuit for the CMS Endcap Timing Layer (ETL) in the High-Luminosity LHC upgrade. The discriminator threshold of the ETL readout chip (ETROC) needs to be calibrated regularly to mitigate the circuit baseline change. Traditional methods need a lot of communication through a slow control system hence are time-consuming. This paper describes an in-pixel automatic scheme with improvements in operating time and usability. In this scheme, a sample-accumulation circuit is used to measure the average discriminator output. A binary successive approximation and linear combination scan are applied to find the equivalent baseline. The actual calibration procedure has been first implemented in FPGA firmware and tested with the ETROC front-end prototype chip (ETROC0). The calibration circuit has been implemented with Triple Modular Redundancy (TMR) and verified with Single Event Effects (SEEs) simulation. A complete calibration process lasts 35 ms with a 40 MHz clock. In the worst case, the dynamic and static power consumption are estimated to be 300 uW and 10.4 uW, respectively. The circuit design, implemented in a 65 CMOS technology, will be integrated into ETROC2, the next iteration of the ETROC with a 16 x16 pixel matrix.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Measurement of e + e - Momentum and Angular Distributions from Linearly Polarized Photon Collisions

The Breit-Wheeler process which produces matter and antimatter from photon collisions is experimentally investigated through the observation of 6085 exclusive electron-positron pairs in ultraperipheral Au + Au collisions at $\sqrt{s_{NN}}$ = 200 GeV. The measurements reveal a large fourth-order angular modulation of cos 4Δ$\phi$ = (16.8 ± 2.5)% and smooth invariant mass distribution absent of vector mesons ($\phi$, ω, and ρ) at the experimental limit of ≤ 0.2% of the observed yields. The differential cross section as a function of e + e - pair transverse momentum P ⟂ peaks at low value with $\sqrt\langle$$P2\atop{⟂}$$\rangle$ = 38.1 ± 0.9 MeV and displays a significant centrality dependence. These features are consistent with QED calculations for the collision of linearly polarized photons quantized from the extremely strong electromagnetic fields generated by the highly charged Au nuclei at ultrarelativistic speed. The experimental results have implications for vacuum birefringence and for mapping the magnetic field which is important for emergent QCD phenomena.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Characterization of the CMS Endcap Timing Layer readout chip prototype with charge injection

We present the characterization of a readout Application-Specific Integrated Circuit (ASIC) for the CMS Endcap Timing Layer (ETL) of the High-Luminosity LHC upgrade with charge injection. The ASIC, named ETROC and developed in a 65 nm CMOS technology, reads out a 16× 16 pixel matrix of the Low-Gain Avalanche Detector (LGAD). The jitter contribution from ETROC is required to be below 40 ps to achieve the 50 ps overall time resolution per hit. The analog readout circuits in ETROC consist of the preamplifier and the discriminator. The preamplifier handles the LGAD charge signal with the most probable value of around 15 fC. The discriminator generates the digital pulse, which provides the Time-Of-Arrival (TOA, leading edge) and Time-Over-Threshold (TOT, pulse width) information. The prototype of ETROC (ETROC0) that implements a single channel of analog readout circuits has been evaluated with charge injection. The jitter of the analog readout circuits, measured from the discriminator's leading edge, is better than 16 ps for a charge larger than 15 fC with the sensor capacitance. The time walk resulting from different pulse heights can be corrected using the TOT measurement. The time resolution distribution has a standard deviation of 29 ps after the time-walk correction from the charge injection. At room temperature, the preamplifier's power consumption is measured to be 0.74 mW and 1.53 mW per pixel in the low- and high-power mode, respectively. Finally, the measured power consumption of the discriminator is 0.84 mW per pixel. With the ASIC alone or the LGAD sensor, The characterization performances fulfill the ETL's challenging requirements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Development of a Reference Database for Beta-Delayed Neutron Emission

Beta-delayed neutron emission is important for nuclear structure and astrophysics as well as for reactor applications. Significant advances in nuclear experimental techniques in the past two decades have led to a wealth of new measurements that remain to be incorporated in the databases. In this work, we report on a coordinated effort to compile and evaluate all the available β-delayed neutron emission data. The different measurement techniques have been assessed and the data have been compared with semi-microscopic and microscopic-macroscopic models. The new microscopic database has been tested against aggregate total delayed neutron yields, time-dependent group parameters in 6-and 8-group re-presentation, and aggregate delayed neutron spectra. New recommendations of macroscopic delayed-neutron data for fissile materials of interest to applications are also presented. The new Reference Database for Beta-Delayed Neutron Emission Data is available online.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Transmission of Images on High-Temperature Nuclear-Grade Metallic Pipe with Ultrasonic Elastic Waves

Transmission of information using elastic ultrasonic waves on existing metallic pipes provides an alternative communication option for a nuclear facility. The advantages of this approach consist of transmitting information through barriers, such as the containment building wall, with minimal modification of the existing hardware. Because bit rates on the order of kilobits per second are achievable, relatively large volumes of data, such as images, can be transmitted. A viable candidate for an ultrasonic communication channel is a stainless steel pipe of the chemical volume control system (CVCS) that penetrates through the reactor containment building wall through a sealed tunnel. To study ultrasonic communication under simulated nuclear facility conditions of high temperature, a test article was developed by installing heating tapes, temperature controllers, and thermal insulation on a laboratory CVCS-like stainless steel pipe. High temperature and radiation-resilient lithium niobate ultrasonic transducers were utilized for information transmission on the heated pipe. The amplitude shift keying (ASK) digital communication protocol was developed and implemented in a GNU Radio software-defined radio environment. A root-raised-cosine filter was introduced to suppress ultrasonic transducer ringing and thus reduce inter-symbol interference. This resulted in the enhancement of the data transmission bit rate compared to information encoding with square pulses. Demonstrations of communication at high temperature included transmission of a 90-KB image at the bit rate of 10 Kbps with a bit error rate of 10 -3 across a 6-ft-long straight pipe heated up to 230 degrees C. Additional preliminary studies were conducted to evaluate ultrasonic communication system resilience to environmental degradation and damage.

42 ENGINEERING↗
DOE OSTI2021

Discovering New Strong Gravitational Lenses in the DESI Legacy Imaging Surveys

We have conducted a search for new strong gravitational lensing systems in the Dark Energy Spectroscopic Instrument Legacy Imaging Surveys' Data Release 8. We use deep residual neural networks, building on previous work presented by Huang et al. These surveys together cover approximately one-third of the sky visible from the Northern Hemisphere, reaching a z-band AB magnitude of ~22.5. We compile a training sample that consists of known lensing systems as well as non-lenses in the Legacy Surveys and the Dark Energy Survey. After applying our trained neural networks to the survey data, we visually inspect and rank images with probabilities above a threshold. In this work, we present 1210 new strong lens candidates.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Strange hadron production in Au + Au collisions at s N N = 7.7 , 11.5, 19.6, 27, and 39 GeV

In this paper, we present STAR measurements of strange hadron (K$0\atop{s}$, Λ, $\bar{Λ}$, $Ξ$ - , $\bar{Ξ}$ + , Ω - , $\bar{Ω}$ + , and Φ ) production at mid-rapidity (|y|<0.5) in Au+Au collisions at √s NN = 7.7 – 39 GeV from the Beam Energy Scan Program at the Relativistic Heavy Ion Collider (RHIC). Transverse momentum spectra, averaged transverse mass, and the overall integrated yields of these strange hadrons are presented versus the centrality and collision energy. Antibaryon-to-baryon ratios(Λ/$\bar{Λ}$, $Ξ$ - / $\bar{Ξ}$ + , Ω - / $\bar{Ω}$ + ) are presented as well, and used to test a thermal statistical model and to extract the temperature normalized strangeness and baryon chemical potentials at hadronic freeze-out (μ B / T ch μ S / T ch ) in central collisions. Strange baryon-to-pion ratios are compared to various model predictions in central collisions for all energies. The nuclear modification factors (R CP ) and antibaryon-to-meson ratios as a function of transverse momentum are presented for all collision energies. The K$0\atop{s}$ R CP shows no suppression for p T up to 3.5 GeV/c at energies of 7.7 and 11.5 GeV. The $\bar{Λ}$/ K$0\atop{s}$ ratio also shows baryon-to-meson enhancement at intermediate p T (~2.5 GeV/c) in central collisions at energies above 19.6 GeV. In conclusion, both observations suggest that there is likely a change of the underlying strange quark dynamics at collision energies below 19.6 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Compilation and Evaluation of Beta-Delayed Neutron Emission Probabilities and Half-Lives for Z > 28 Precursors

We present a compilation and evaluation of experimental β-delayed neutron emission probabilities (P n ) and half-lives (T 1/2 ) for known or potential β-delayed neutron precursors with atomic number Z >28 ( 73 Cu – 233 Fr). This article includes the recommended values of both of these quantities, together with a compilation of experimental measurements when available. Some notable cases, as well as proposed standards forβ-delayed neutron measurements are also discussed. Evaluated data has also been compared to systematics using three different approaches.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

High-sensitivity nanoscale chemical imaging with hard x-ray nano-XANES

Resolving chemical species at the nanoscale is of paramount importance to many scientific and technological developments across a broad spectrum of disciplines. Hard x-rays with excellent penetration power and high chemical sensitivity are suitable for speciation of heterogeneous (thick) materials. Here, we report nanoscale chemical speciation by combining scanning nanoprobe and fluorescence-yield x-ray absorption near-edge structure (nano-XANES). First, the resolving power of nano-XANES was demonstrated by mapping Fe(0) and Fe(III) states of a reference sample composed of stainless steel and hematite nanoparticles with 50-nm scanning steps. Nano-XANES was then used to study the trace secondary phases in lithium iron phosphate (LFP) particles. We observed individual Fe-phosphide nanoparticles in pristine LFP, whereas partially (de)lithiated particles showed Fe-phosphide nanonetworks. These findings shed light on the contradictory reports on Fe-phosphide morphology in the literature. Nano-XANES bridges the capability gap of spectromicroscopy methods and provides exciting research opportunities across multiple disciplines.

25 ENERGY STORAGE↗
DOE OSTI2020

Beam energy dependence of net- Λ fluctuations measured by the STAR experiment at the BNL Relativistic Heavy Ion Collider

The measurements of particle multiplicity distributions have generated considerable interest in understanding the fluctuations of conserved quantum numbers in the quantum chromodynamics (QCD) hadronization regime, in particular near a possible critical point and near the chemical freeze-out. Net-protons and net-kaons have been used as proxies for the net-baryon number and net-strangeness, respectively. We report the measurement of efficiency- and centrality-bin width-corrected cumulant ratios (C 2 /C 1 , C 3 /C 2 ) of net- Λ distributions, in the context of both strangeness and baryon number conservation, as a function of collision energy, centrality, and rapidity. The results are for Au + Au collisions at five beam energies ( √s NN = 19.6 , 27, 39, 62.4, and 200 GeV) recorded with the Solenoidal Tracker at RHIC (STAR). We compare our results to the Poisson and negative binomial (NBD) expectations, as well as to ultrarelativistic quantum molecular dynamics (UrQMD) and hadron resonance gas (HRG) model predictions. Both NBD and Poisson baselines agree with data within the statistical and systematic uncertainties. UrQMD describes the measured net- Λ C 1 and C 3 at 200 GeV reasonably well but deviates from C 2 , and the deviation increases as a function of collision energy. The ratios of the measured cumulants show no features of critical fluctuations. The chemical freeze-out temperatures extracted from a recent HRG calculation, which was successfully used to describe the net-proton, net-kaon, and net-charge data, indicate Λ freeze-out conditions similar to those of kaons. However, large deviations are found when comparing with temperatures obtained from net-proton fluctuations. The net- Λ cumulants show a weak but finite dependence on the rapidity coverage in the acceptance of the detector, which can be attributed to quantum number conservation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Finding Strong Gravitational Lenses in the DESI DECam Legacy Survey

We perform a semi-automated search for strong gravitational lensing systems in the 9000 deg 2 Dark Energy Camera Legacy Survey (DECaLS), part of the Dark Energy Spectroscopic Instrument Legacy Imaging Surveys. The combination of the depth and breadth of these surveys are unparalleled at this time, making them particularly suitable for discovering new strong gravitational lensing systems. We adopt the deep residual neural network architecture developed by Lanusse et al. for the purpose of finding strong lenses in photometric surveys. We compile a training sample that consists of known lensing systems in the Legacy Surveys and the Dark Energy Survey as well as non-lenses in the footprint of DECaLS. In this paper we show the results of applying our trained neural network to the cutout images centered on galaxies typed as ellipticals in DECaLS. The images that receive the highest scores (probabilities) are visually inspected and ranked. Here we present 335 candidate strong lensing systems, identified for the first time.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

First Measurement of Λ c Baryon Production in Au + Au Collisions at s N N = 200 GeV

Herein we report on the first measurement of the charmed baryon Λ c ± production at midrapidity ( | y | < 1 ) in Au + Au collisions at s NN = 200 GeV collected by the STAR experiment at the Relativistic Heavy Ion Collider. The Λ c / D 0 [denoting ( Λ c + + Λ c - ) / ( D 0 + D ¯ 0 ) ] yield ratio is measured to be 1.08 ± 0.16 ( stat ) ± 0.26 ( sys ) in the 0%–20% most central Au + Au collisions for the transverse momentum ( p T ) range 3 < p T < 6 GeV / c . This is significantly larger than the pythia model calculations for p + p collisions. The measured Λ c / D 0 ratio, as a function of p T and collision centrality, is comparable to the baryon-to-meson ratios for light and strange hadrons in Au + Au collisions. Model calculations including coalescence hadronization for charmed baryon and meson formation reproduce the features of our measured Λ c / D 0 ratio.

13000 GeV-cms/nucleon↗
DOE OSTI2020

Characterization of a gigabit transceiver for the ATLAS inner tracker pixel detector readout upgrade

We present a gigabit transceiver prototype Application Specific Integrated Circuit (ASIC), GBCR, for the ATLAS Inner Tracker (ITk) Pixel detector readout upgrade. GBCR is designed in a 65-nm CMOS technology and consists of four upstream receiver channels, a downstream transmitter channel, and an Inter-Integrated Circuit (I2C) slave. The upstream channels receive the data at 5.12 Gbps passing through 5-meter 34-American Wire Gauge (AWG) Twin-axial (Twinax) cables, equalize and retime them with a recovered clock, and then drive an optical transmitter. The downstream channel receives the data at 2.56 Gbps from an optical receiver and drives the cable as same as the upstream channels. The jitter of the upstream channel output is measured to be 35 ps (peak-peak) when the Clock-Data Recovery (CDR) module is turned on and the jitter of the downstream channel output after the cable is 138 ps (peak-peak). The power consumption of each upstream channel is 72 mW when the CDR module is turned on and the downstream channel consumes 27 mW. GBCR survives the total ionizing dose of 200 kGy.

47 OTHER INSTRUMENTATION↗