Engineering topics

Horstman, C. C.

Publications and source records attributed to Horstman, C. C..

At least 73 records · Page 4

NASA NTRS1978

Comparison of multiequation turbulence models for several shock-separated boundary-layer interaction flows

Several multiequation eddy viscosity models of turbulence are used with the Navier-Stokes equations to compute three classes of experimentally documented shock-separated turbulent boundary-layer flows. The types of flow studied are: (1) a normal shock at transonic speeds in both a circular duct and a two-dimensional channel; (2) an incident oblique shock at supersonic speeds on a flat surface; and (3) a two-dimensional compression corner at supersonic speeds. Established zero-equation (algebraic), one-equation (kinetic energy), and two-equation (kinetic energy plus length scale) turbulence models are each utilized to describe the Reynolds shear stress for the three classes of flows. These models are assessed by comparing the calculated values of skin friction, wall pressure distribution, velocity, Mach number, and turbulent kinetic energy profiles with experimental measurements. Of the models tested the two-equation model results gave the best overall agreement with the data.

Viegas, J. R.↗

NASA NTRS1978

An experimental documentation of pressure gradient and Reynolds number effects on compressible turbulent boundary layers

Attached supersonic turbulent boundary layers, with a wide range of adverse pressure gradient strengths, are investigated for Reynolds numbers from 11.7 x 1 million to 314 x 1 million. Surface pressure and surface shear measurements were obtained for six flow fields over the entire Reynolds number range. In addition, two flow fields - one with a moderate pressure gradient and the other with a severe pressure gradient - are thoroughly documented at a single Reynolds number. This experimental documentation includes both mean and fluctuating profiles throughout the flow field, and is sufficient to define the complete flow field, including the upstream undisturbed flow region.

Kussoy, M. I.↗

NASA NTRS1978

Reynolds number and pressure gradient effects on compressible turbulent boundary layers

A detailed investigation of attached supersonic turbulent boundary layers over an extensive range of Reynolds numbers (12 x 10 to the 6th to 314 x 10 to the 6th) is presented. Experimental measurements were obtained for adverse pressure gradients ranging in magnitude from those of previous investigations to those approaching separation. The measurements include mean values of surface pressure and skin-friction, mean-flow profiles, and profiles of the three turbulent velocity fluctuation components and turbulent shear stress. Numerical solutions, employing three turbulence models of various degrees of complexity have been compared with the details of the measured flow fields. Generally, it was found that the more sophisticated turbulence models are superior to a mixing length model for predicting the Reynolds number and pressure gradient effects. However, some details of the turbulent fluctuations as well as the exact Reynolds number trends indicated by the data were not accurately predicted with any of the turbulence models considered.

Acharya, M.↗

NASA NTRS1977

Evaluation of turbulence models for three primary types of shock-separated boundary layers

Zero-equation (algebraic), one-equation (kinetic energy), and two-equation (kinetic energy plus length scale) turbulence eddy viscosity models were used in computing three basic types of shock-separated boundary-layer flows. The three basic types of shock boundary-layer interaction discussed are: (1) a normal shock wave at transonic speeds, (2) a compression corner shock at supersonic speeds, and (3) an incident oblique shock at hypersonic speeds. The models tested are simple, unmodified models used extensively for incompressible, unseparated flows. A comparison of computed and measured results for the compressible, separated flows described herein indicates that model performance is dependent on flow configuration with no distinct superiority of one model over the other for all three flow configurations.

Coakley, T. J.↗

NASA NTRS1977

Hot-wire anemometry in transonic flow

The use of hot-wire anemometry for obtaining fluctuating data in transonic flows has been evaluated. From hot-wire heat loss correlations based on previous transonic data, the sensitivity coefficients for velocity, density, and total temperature fluctuations have been calculated for a wide range of test conditions and sensor parameters. For sensor Reynolds number greater than 20 and high sensor overheat ratios, the velocity sensitivity remains independent of Mach number and equal to the density sensitivity. These conditions were verified by comparisons of predicted sensitivities with those from recent direct calibrations in transonic flows. Based on these results, techniques are presented to obtain meaningful measurements of fluctuating velocity, density, and Reynolds shear stress using hot-wire and hot-film anemometers. Example of these measurements are presented for two transonic boundary layers.

Horstman, C. C.↗

NASA NTRS1977

Reynolds number effects on shock-wave turbulent boundary-layer interactions - A comparison of numerical and experimental results

An experiment is described that tests and guides computations of a shock-wave turbulent boundary-layer interaction flow over a 20-deg compression corner at Mach 2.85. Numerical solutions of the time-averaged Navier-Stokes equations for the entire flow field, employing various turbulence models, are compared with the data. Each model is critically evaluated by comparisons with the details of the experimental data. Experimental results for the extent of upstream pressure influence and separation location are compared with numerical predictions for a wide range of Reynolds numbers and shock-wave strengths.

Horstman, C. C.↗

NASA NTRS1977

A critique of some recent second-order turbulence closure models for compressible boundary layers

Computations based on two recently developed second-order turbulence closure models are compared with a series of boundary-layer experiments and with predictions of these experiments using an algebraic mixing length model. One of the models employs an eddy viscosity, whereas the other evaluates components of the Reynolds stress tensor. For flat plates, the computations are compared with the van Driest skin-friction transformation to assess the handling of compressibility. For boundary layers in pressure gradients, four experiments at Mach 4 and one at Mach 6.7 are used as the bases for comparison. In general, both models represent mean velocities and skin friction reasonably well, but represent the turbulence shear stress less accurately.

Rubesin, M. W.↗

NASA NTRS1977

Boundary layer shear stress in subsonic and supersonic flow

A wide range of shear stress distributions for turbulent boundary layers is examined. A solution for the shear stress in terms of the mean flow is obtained for the limiting case of large Reynolds numbers. Attention is given to turbulent boundary layer shear stress, zero pressure gradient flow, increasing pressure gradient flow, and decreasing pressure gradient flow.

Sandborn, V. A.↗

NASA NTRS1976

A turbulence model for nonequilibrium adverse pressure gradient flows

This paper presents a method for calculating compressible adverse pressure gradient boundary layers by using an algebraic eddy viscosity turbulence model that has been modified for variable pressure gradient and turbulence memory effects. The pressure gradient corrections are based on previous incompressible data correlations. Several methods for including the effects of turbulence memory are evaluated. A new lag model, which gives good agreement with available experimental data, is developed. Finally, a correlation is developed for the lag length parameter employed in the model as a function of the known experimental flow variables.

Horstman, C. C.↗

NASA NTRS1976

Turbulence measurements in hypersonic shock-wave boundary-layer interaction flows

Turbulent intensity and Reynolds shear stress measurements are presented for two nonadiabatic hypersonic shock-wave boundary-layer interaction flows, one with and one without separation. These measurements were obtained using a new hot-wire probe specially designed for heated flows. Comparison of the separated and attached flows shows a significant increase above equilibrium values in the turbulent intensity and shear stress downstream of the interaction region for the attached case, while for the separated case, the turbulent fluxes remain close to equilibrium values. This effect results in substantial differences in turbulence lifetime for the two flows. We propose that these differences are due to a coupling between the turbulent energy and separation bubble unsteadiness, a hypothesis supported by the statistical properties of the turbulent fluctuations.

Mikulla, V.↗

NASA NTRS1976

Turbulence measurements in hypersonic shock-wave boundary-layer interaction flows

Turbulent intensity and Reynolds shear stress measurements are presented for two nonadiabatic hypersonic shock-wave boundary-layer interaction flows, one with and one without separation. These measurements were obtained using a new hot-wire probe specially designed for heated flows. Comparison of the separated and attached flows shows a significant increase above equilibrium values in the turbulent intensity and shear stress downstream of the interaction region for the attached case, while for the separated case, the turbulent fluxes remain close to equilibrium values. This effect results in substantial differences in turbulence lifetimes for the two flows. It is proposed that these differences are due to a coupling between the turbulent energy and separation bubble unsteadiness, a hypothesis supported by the statistical properties of the turbulent fluctuations.

Mikulla, V.↗

NASA NTRS1975

Hot wire anemometry in transonic flow

The use of hot-wire anemometry for obtaining fluctuating data in transonic flows has been evaluated. From hot-wire heat loss correlations based on previous transonic data, the sensitivity coefficients for velocity, density, and total temperature fluctuations have been calculated for a wide range of test conditions and sensor parameters. For sensor Reynolds numbers greater than 20 and high sensor overheat ratios, the velocity sensitivity remains independent of Mach number and equal to the density sensitivity. These conclusions were verified by comparisons of predicted sensitivities with those from recent direct calibrations in transonic flows. Based on these results, techniques are presented to obtain meaningful measurements of fluctuating velocity, density, and Reynolds shear stress using hot-wire and hot-film anemometers. Examples of these measurements are presented for two transonic boundary layers.

Horstman, C. C.↗

NASA NTRS1975

Turbulence stress measurements in a nonadiabatic hypersonic boundary layer

Turbulent shear stress and direct turbulent total heat-flux measurements have been made across a nonadiabatic, zero pressure gradient, hypersonic boundary layer by using specially designed hot-wire probes free of strain-gauging and wire oscillation. Heat-flux measurements were in reasonably good agreement with values obtained by integrating the energy equation using measured profiles of velocity and temperature. The shear-stress values deduced from the measurements, by assuming zero correlation of velocity and pressure fluctuations, were lower than the values obtained by integrating the momentum equation. Statistical properties of the cross-correlations are similar to corresponding incompressible measurements at approximately the same momentum-thickness Reynolds number.

Mikulla, V.↗

NASA NTRS1975

An experimental and numerical investigation of shock wave induced turbulent boundary layer separation at hypersonic speeds

A thoroughly documented experiment is reported that was specifically designed to test and guide computations of the interaction of an impinging shock wave with a turbulent boundary layer. Detailed mean flow field and surface data are presented for two shock strengths which resulted in attached and separated flows, respectively. Numerical computations are used to illustrate the dependence of the computations on the particulars of the turbulence models. Models appropriate for zero pressure gradient flows predicted the overall features of the flow fields, but were deficient in predicting many of the details of the interaction regions. Improvements to the turbulence model parameters were sought through a combination of detailed data analysis and computer simulations which tested the sensitivity of the solutions to model parameter changes. Computer simulations using these improvements are presented and discussed.

Marvin, J. G.↗

NASA NTRS1975

Mean and fluctuating flow measurements of a fully-developed, non-adiabatic, hypersonic boundary layer

Extensive boundary-layer measurements have been made on a cone-ogive-cylinder model at a free-stream Mach number of 7.0 and momentum-thickness Reynolds number of 8500. Mean flow transformations and calculated turbulence correlations are presented which are in good agreement with previous incompressible results. New quantitative turbulence measurements including measurements of the first higher moment and probability density of fluctuations in mass flow and total temperature in hypersonic flow are also presented. The higher moment and probability density data show that the characters of the fluctuation modes of the mass flow and total temperature are significantly different in the wall region and in the outer part of the boundary layer. These differences together with data on the turbulence scale and lifetime obtained from autocorrelation and space-time correlation measurements are discussed.

Owen, F. K.↗

NASA NTRS1975

Shock-wave-induced turbulent boundary-layer separation at hypersonic speeds

An experiment is described that tests and guides computations of the interaction of a shock wave with a turbulent boundary layer. Numerical solutions of the time-averaged Navier-Stokes equations for the entire flow field employing algebraic eddy viscosity and turbulent Prandtl number models for shear stress and heat flux are presented and used to illustrate the dependence of the computations on the particulars of the turbulence models. To guide modifications in the models, the mean flow profiles and surface measurements of pressure, shear, and heat flux are analyzed critically. The results show that the models of eddy viscosity require substantial modifications in the interaction region. Improved solutions employing the experimentally modified models are presented.

Horstman, C. C.↗

NASA NTRS1975

The measurement of shear stress and total heat flux in a nonadiabatic turbulent hypersonic boundary layer

Mikulla, V.↗

NASA NTRS1975

An experimental and numerical investigation of shock-wave induced turbulent boundary-layer separation at hypersonic speeds

An experiment designed to test and guide computations of the interaction of an impinging shock wave with a turbulent boundary layer is described. Detailed mean flow-field and surface data are presented for two shock strengths which resulted in attached and separated flows, respectively. Numerical computations, employing the complete time-averaged Navier-Stokes equations along with algebraic eddy-viscosity and turbulent Prandtl number models to describe shear stress and heat flux, are used to illustrate the dependence of the computations on the particulars of the turbulence models. Models appropriate for zero-pressure-gradient flows predicted the overall features of the flow fields, but were deficient in predicting many of the details of the interaction regions. Improvements to the turbulence model parameters were sought through a combination of detailed data analysis and computer simulations which tested the sensitivity of the solutions to model parameter changes. Computer simulations using these improvements are presented and discussed.

Marvin, J. G.↗