Engineering Papers⌕ Search

Engineering topics

Harries, W. L.

Publications and source records attributed to Harries, W. L..

30 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Simplified model of a volumetric direct nuclear pumped He-3-Ar laser

A physical model for the volumetric nuclear pumped He-3-Ar laser is described and the source terms arising from the He-3(n, p)H-3 reaction as well as the rate equations are given. Steady state solutions are derived for the densities of the species vs the fraction of argon. The dominant pumping mechanism is found to be collisional radiative recombination of the argon atomic ions and subsequent cascading into the upper laser level. The reactions following recombination are described and an expression is derived for the difference in densities of the argon 3d and 4p levels. Comparison with experiments shows good agreement.

Harries, W. L.↗
NASA NTRS1978

Investigation of a staged plasma-focus apparatus

A new staged plasma-focus geometry combining two Mather-type plasma-focus guns was constructed, and the current-sheet dynamics were investigated. The production of simultaneous pairs of plasma foci was achieved. The intensities of X-ray and fusion-neutron emission were measured and found to agree with the scaling law for a plasma focus. Advantages of this new geometry include the possibility of using plasma-focus type pinches in multiple arrays at power levels beyond the validity regime of the current scaling law for a single gun.

Lee, J. H.↗
NASA NTRS1978

Space and time resolved emission of hard X-rays from a plasma focus

The X-ray emission from focused plasmas was observed with an image converter camera in the streak and framing modes. Use of a very high gain image intensifier enabled weak hard X-ray emission (above 25 keV) to be recorded. The use of an admixture of higher atomic number into the deuterium was avoided, and the role of the vapor from the anode surface could be discerned. The recorded bremsstrahlung emission seemed to be from a metallic plasma of copper released from the anode surface by bombardment from an intense electron beam. The intensity of emission was determined by the density of copper and the density and energy of the electron beam. The main emission recorded occurred several 100 nsec after the focus was over, which implies that the electric fields driving the beam existed for this duration. It is suggested that the fields were created by annihilation of magnetic flux for a time much longer than the focus duration.

Harries, W. L.↗
NASA NTRS1978

Trajectories of high energy electrons in a plasma focus

Measurements are made of high-energy electron trajectories in a plasma focus as functions of position, time, energy, and angle of emission. The spatial resolution of the X-ray emission shows that low-energy X-rays are emitted from the anode surface. It is also suggested that the highest energy X-rays originate from a small region on the axis. The so-called shadow technique shows that the electron beam is perpendicular to the anode surface. Polar diagrams of medium and high-energy X-rays agree with the bremsstrahlung emission from a relativistic electron beam, the current of which is several 100 A.

Harries, W. L.↗
NASA NTRS1977

Computer simulation of plasma and N-body problems

Any spiral structure in computer-generated galaxies is generally short lived and the final state is a rotating bar. The bar thus obtained rotates more slowly than the stars. It has been argued that core/halo components have a stabilizing effect on galaxies and result in longer lived spiral structure. However, numerical experiments with large fixed stellar components representing the core/halo component show that multiarmed spiral structure develops and persists for many rotations but only in an evolving manner. That is, the spiral structure is either wound up into a tight pattern or it is wound up and then reappears again. A recent study of the effect of fixed core/halo components does show that the bar instability is indeed inhibited by a sufficiently large fixed component. The present study determines the effect of a self-consistent (rather than fixed) core/halo component in order to show whether there are any instabilities (such as two-stream) or other important interactions present that may be suppressed with a fixed core. Also studied were the effects of finite thickness of the disk and of three-dimensional essentially spherical core/halo components.

Harries, W. L.↗
NASA NTRS1977

Fission induced plasmas

The possibility of creating a plasma from fission fragments was investigated, as well as the probability of utilizing the energy of these particles to create population inversion leading to laser action. Eventually, it is hoped that the same medium could be used for both fissioning and lasing, thus avoiding inefficiences in converting one form of energy to the other. A central problem in understanding a fission induced plasma is to obtain an accurate model of the electron behavior; some calculations are presented to this end. The calculations are simple, providing a compendium of processes for reference.

Harries, W. L.↗
NASA NTRS1977

X-ray emission from high temperature plasmas

The physical processes occurring in plasma focus devices were investigated with particular emphasis on X-ray emission. Topics discussed include: trajectories of high energy electrons; detection of ion trajectories; spatial distribution of neutron emission; space and time resolved emission of hard X-rays from a plasma focus; the staged plasma focus as a variation of the hypocloidal pinch; formation of current sheets in a staged plasma focus; and X-ray and neutron emission from a staged plasma focus. The possibility of operating dense plasma-focus type devices in multiple arrays beyond the scaling law for a single gun is discussed.

Harries, W. L.↗
NASA NTRS1976

X-ray emission from high temperature plasmas

The physical processes occurring in plasma focus devices were studied. These devices produce dense high temperature plasmas, which emit X rays of hundreds of KeV energy and one to ten billion neutrons per pulse. The processes in the devices seem related to solar flare phenomena, and would also be of interest for controlled thermonuclear fusion applications. The high intensity, short duration bursts of X rays and neutrons could also possibly be used for pumping nuclear lasers.

Harries, W. L.↗
NASA NTRS1975

Computer simulation of plasma and N-body problems

The following FORTRAN language computer codes are presented: (1) efficient two- and three-dimensional central force potential solvers; (2) a three-dimensional simulator of an isolated galaxy which incorporates the potential solver; (3) a two-dimensional particle-in-cell simulator of the Jeans instability in an infinite self-gravitating compressible gas; and (4) a two-dimensional particle-in-cell simulator of a rotating self-gravitating compressible gaseous system of which rectangular coordinate and superior polar coordinate versions were written.

Harries, W. L.↗
NASA NTRS1975

X-ray emission from high temperature plasmas

The bremsstrahlung X-rays from a plasma focus device were investigated with emphasis on the emission versus position, time, energy, and angle of emission. It is shown that low energy X-rays come from the plasma focus region, but that the higher energy components come from the anode. The emission is anisotropic, the low energy polar diagram resembling a cardioid, while the high energy emission is a lobe into the anode. The plasma parameters were considered indicating that even in the dense focus, the plasma is collisionless near the axis. By considering the radiation patterns of relativistic electrons a qualitative picture is obtained, which explains the measured polar diagrams, assuming the electrons that produce the X-rays have velocity vectors lying roughly in a cone between the point of focus and the anode. The average electron energy is about 3keV at the focus and about 10 keV on the anode surface. Results are consistent with the converging beam model of neutron production.

Harries, W. L.↗
NASA NTRS1974

X-ray emission from high temperature plasmas

X-rays from a 25-hJ plasma focus apparatus were observed with pinhole cameras. The cameras consist of 0.4 mm diameter pinholes in 2 cm thick lead housing enclosing an X-ray intensifying screen at the image plane. Pictures recorded through thin aluminum foils or plastic sheets for X-ray energies sub gamma smaller than 15 keV show distributed X-ray emissions from the focussed plasma and from the anode surface. However, when thick absorbers are used, radial filamentary structure in the X-ray emission from the anode surface is revealed. Occasionally larger structures are observed in addition to the filaments. Possible mechanisms for the filamentary structure are discussed.

Harries, W. L.↗