Engineering Papers⌕ Search

Engineering topics

Fuller, Elliot James

Publications and source records attributed to Fuller, Elliot James.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Low Power, Radiation Resilient Synchronous Edge Processing for Remote Monitoring

Next-generation space remote sensing systems may be equipped with imaging arrays that sense data at a rate that outstrips the processing capability of any computing hardware that can operate within a satellite’s power budget. This project developed novel convolutional and recurrent neural networks to detect and estimate point-like events amid clutter, and investigated their efficient and accurate implementation on analog in-memory computing systems that are 10-1000× more energy-efficient than digital processors. This project leveraged two memory devices at different levels of technological maturity: a large-scale analog computing prototype using commercial SONOS charge-trap memory, and electrochemical memory (ECRAM) with intrinsic radiation hardness. We experimentally demonstrated end-to-end analog processing of our neural networks on SONOS and characterized the radiation response of both SONOS and ECRAM. We advanced the state-of-the-art in ECRAM precision and reliability, and developed co-design methods to enable accurate long-term operation of SONOS analog accelerators in space radiation environments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Picosecond Carrier Dynamics in InAs and GaAs Revealed by Ultrafast Electron Microscopy

Understanding the limits of spatio-temporal carrier dynamics, especially in III-V semiconductors, is key to designing ultrafast and ultra-small optoelectronic components. However, identifying such limits and the properties controlling them has been elusive. Here, using scanning ultrafast electron microscopy (SUEM), in bulk n-GaAs and p-InAs, we simultaneously measure picosecond carrier dynamics along with three related quantities: sub-surface band bending, above-surface vacuum potentials, and surface trap densities. We make two surprising observations. First, we uncover a negative-time contrast in secondary electrons resulting from an interplay among these quantities. Second, despite dopant concentrations and surface state densities differing by many orders of magnitude between the two materials, their carrier dynamics, measured by photo-excited band bending and filling of surface states, occur at a seemingly common timescale of about 100 ps. This observation may indicate fundamental kinetic limits tied to a multitude of material and surface properties of optoelectronic III-V semiconductors, and highlights the need for techniques that simultaneously measure electro-optical kinetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Characterization of ECRAM materials and devices

As the limits of Moore’s Law approaches, new computing paradigms are developing to breakthrough this bottleneck. One such computer architecture is neuromorphic computing, which models the brain. Electrochemical random-access memory (ECRAM) is a low power and energy efficient memory due to characteristics, such as in-memory compute, ion modulation of the channel conductance, and computation distribution with large scale array integration.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Thermally sensitive state change ionic redox transistor

A thermally sensitive ionic redox transistor comprises a channel, a reservoir layer, and an electrolyte layer disposed between the channel and the reservoir layer. A conductance of the channel is varied by changing concentration of ions in the channel layer. The electrolyte layer is configured to undergo a state change at a state transition temperature. Below the state transition temperature, ions in the electrolyte layer are substantially immobile. Above the state transition temperature, ions can move freely between the reservoir layer and the channel across the electrolyte layer in response to a voltage being applied between the channel and the reservoir layer. When the device is cooled below the state transition temperature or temperature range, the ions are trapped in one or more of the layers because the electrolyte layer loses its ionic conductivity. A state of the redox transistor can be read by measuring the conductance of the channel.

Ashby, David Scott↗
DOE OSTI2024

Systems and methods for dynamically reconfigurable artificial synapses and neurons with tunable activation functions

An ionic redox transistor comprises a solid channel, a solid reservoir layer, and a solid electrolyte layer disposed between the channel and the reservoir layer. The channel exhibits a substantially linear current-voltage relationship in a first range of voltages, and a nonlinear current-voltage relationship in a second range of voltages that is greater than the first range of voltages. One or both of the substantially linear current-voltage relationship or the nonlinear current-voltage relationship of the channel is varied by changing the concentration of ions such as oxygen vacancies in the channel. Ion or vacancy transport between the channel and the reservoir layer across the electrolyte layer occurs in response to applying a voltage between the channel and the reservoir layer. Subject to the first range of voltages, the channel can function as a synapse device. Subject to the second range of voltages, the channel can function as a neuron device.

Talin, Albert Alec↗
DOE OSTI2022

Room-Temperature Pseudo-Solid-State Iron Fluoride Conversion Battery with High Ionic Conductivity

Li-metal batteries (LMBs) employing conversion cathode materials (e.g., FeF 3 ) are a promising way to prepare inexpensive, environmentally friendly batteries with high energy density. Pseudo-solid-state ionogel separators harness the energy density and safety advantages of solid-state LMBs, while alleviating key drawbacks (e.g., poor ionic conductivity and high interfacial resistance). In this work, a pseudo-solid-state conversion battery (Li-FeF 3 ) is presented that achieves stable, high rate (1.0 mA cm –2 ) cycling at room temperature. The batteries described herein contain gel-infiltrated FeF 3 cathodes prepared by exchanging the ionic liquid in a polymer ionogel with a localized high-concentration electrolyte (LHCE). The LHCE gel merges the benefits of a flexible separator (e.g., adaptation to conversion-related volume changes) with the excellent chemical stability and high ionic conductivity (~2 mS cm –1 at 25 °C) of an LHCE. The latter property is in contrast to previous solid-state iron fluoride batteries, where poor ionic conductivities necessitated elevated temperatures to realize practical power levels. Importantly, the stable, room-temperature Li-FeF 3 cycling performance obtained with the LHCE gel at high current densities paves the way for exploring a range of architectures including flexible, three-dimensional, and custom shape batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Thermally sensitive ionic redox transistor

A thermally sensitive ionic redox transistor comprises a solid channel, a solid reservoir layer, and a solid electrolyte layer disposed between the channel and the reservoir layer. A conductance of the channel is varied by changing the concentration of ions such as oxygen vacancies in the channel layer. Ionic conductivity of the gate, electrolyte, and channel layers increase with increasing temperature. Ion or vacancy transport between the channel and the reservoir layer across the electrolyte layer occurs in response to applying a voltage between the channel and the reservoir layer when the device is heated to an elevated temperature. When the device is cooled below the elevated temperature, the ions are trapped in one or more of the layers because the materials lose their ionic conductivity. A state of the redox transistor can be read by measuring the conductance of the channel.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Redox transistors based on TiO 2 for analogue neuromorphic computing

The ability to train deep neural networks on large data sets have made significant impacts onto artificial intelligence, but consume significant amounts of energy due to the need to move information from memory to logic units. In-memory "neuromorphic" computing presents an alternative framework that processes information directly on memory elements. In-memory computing has been limited by the poor performance of the analogue information storage element, often phase-change memory or memristors. To solve this problem, we developed two types of "redox transistors" using TiO 2 (anatase) which stores analogue information states through the electrochemical concentration of dopants in the crystal. The first type of redox transistor uses lithium as the electrochemical dopant ion, and its key advantage is low operating voltage. The second uses oxygen vacancies as the dopant, which is CMOS compatible and can retain state even when scaled to nanosized dimensions. Both devices offer significant advantages in terms of predictable analogue switching over conventional filamentary-based devices, and provide a significant advance in developing materials and devices for neuromorphic computing.

36 MATERIALS SCIENCE↗