Engineering Papers⌕ Search

Engineering topics

Fu, Yangyang

Publications and source records attributed to Fu, Yangyang.

At least 55 records · Page 3

An Optimization Platform Based on Coupled Indoor Environment and HVAC Simulation and its Application in Optimal Thermostat Placement

Model-based optimization can help improve the indoor thermal comfort and energy efficiency of Heating, Ventilation and Air Conditioning (HVAC) systems. The models used in previous optimization studies either omit the dynamic interaction between indoor airflow and HVAC or are too slow for model-based optimization. To address this limitation, we propose an optimization methodology using coupled simulation of the airflow and HVAC that captures the dynamics of both systems. We implement an optimization platform using the coupled models of a coarse grid Fast Fluid Dynamics model for indoor airflow and Modelica models for HVAC which is linked to the GenOpt optimization engine. Then, we demonstrate the new optimization platform by studying the optimal thermostat placement in a typical office room with a VAV terminal box in the design phase. After validating the model, we perform an optimization study, in which the VAV terminal box is dynamically controlled, and find that our optimization platform can determine the optimal location of thermostat to achieve either best thermal comfort or least energy consumption, or the combined. Finally, the time cost for performing such optimization study is about 6.2 h, which is acceptable in the design phase.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Equation-based object-oriented modeling and simulation of data center cooling systems

In this paper, we introduce a newly developed open source data center package in the Modelica Buildings library to support modeling and simulation of cooling and control systems of data centers. The data center package contains major thermal and control component models, such as Computer Room Air Handler, Computer Room Air Conditioner, models of different subsystem configurations such as chillers with differently configured waterside economizers, as well as templates for different systems. Two case studies based on this package are performed to investigate the performances of the cooling and electrical system under normal conditions and emergency situations such as a blackout: one is for a data center powered by conventional energy, and the other is for a data center powered by renewable energy. Simulation results show that the dynamic modeling and multi-domain simulation in the Modelica-based tool make it convenient for users to investigate both normal and emergent operations for conventional and renewable data centers.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

An Open Source Modeling Framework for Interdependent Energy-Transportation-Communication Infrastructure in Smart and Connected Communities

Infrastructure in future smart and connected communities is envisioned as an aggregate of public services, including energy, transportation, and communication systems, all intertwined with each other. The intrinsic interdependency among these systems may exert the underlying influence on both design and operation of the heterogeneous infrastructures. Yet, few prior studies have tapped into the interdependency among these systems in order to quantify their potential impacts during standard operation. In response to this, this paper proposes an open-source, flexible, integrated modeling framework suitable for designing coupled energy, transportation, and communication systems and for assessing the impact of their interdependencies. First, a novel multi-level, multi-layer, multi-agent approach is proposed to enable flexible modeling of the interconnected systems. Then, for the framework's proof of concept, preliminary component and system-level models for different systems are designed and implemented using Modelica, an equation-based object-oriented modeling language. Finally, three case studies of gradually increasing complexity are presented (energy, energy + transportation, and energy + transportation + communication) to evaluate the interdependencies among the three systems. Quantitative analyses show that the deviation of the average velocity on the road can be 10.5% and the deviation of the power drawn from the grid can be 7% with or without considering the transportation and communication system at the peak commute time, indicating the presence of notable interdependencies. The proposed modeling framework also has the potential to be further extended for various modeling purposes and use cases, such as dynamic modeling and optimization, resilience analysis, and integrated decision making in future connected communities.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Coupling Power System Dynamics and Building Dynamics to Enable Building-to-Grid Integration

The interactions between power system dynamics and building dynamics are usually ignored or over-simplified in existing power systems and building modeling and simulation tools, which limits how system modeling can sup-port Building-to-Grid integration. This paper discusses a new approach to consider those interactions by model-ing motor-driven building devices or systems. The motor-driven model is based on simplified mechanical rotation equations and allows us to study the coupling relationship between frequency/voltage in the power system and motor-driven device operation. This model is validated by performing one proof-of-concept case study with Modelica. The simulation results suggest that the proposed model can yield better representations of these interactions than the existing simplified models, especially the ones with the fast transient dynamics.

Buildings-to-grid integration, motor, coupling sim↗

Equation-based object-oriented modeling and simulation for data center cooling: A case study

© 2019 Elsevier B.V. Data center cooling accounts for about 1% of electricity usage in the United States. Computer models are pivotal in designing and operating energy-efficient cooling systems. Compared to conventional building performance simulation programs, the equation-based object-oriented modeling language Modelica is an emerging approach that can enable fast prototyping and dynamic simulation of cooling systems. In this case study, we first modeled the cooling and control systems of an actual data center located in Massachusetts using the open-source Modelica Buildings library, and then calibrated a baseline model based on measurement data. The simulation of the baseline model identified several operation-related issues in the cooling and control systems, such as degraded cooling coils, improper dead band in control settings, and simultaneous cooling and heating in air handlers. Afterwards, we used a sequential search technique as well as an optimization scheme to investigate the energy saving potentials for different energy efficiency measures aiming to address the abovementioned issues. Simulation results show potential energy savings up to 24% by resolving identified control-related issues and optimizing the supply air temperature.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Spatio-temporal dynamics of pulsed gas breakdown in microgaps

Microscale gas breakdown plays a critical role in microplasma generation for numerous applications and device lifetime for miniaturized electronics. This communication extends a previous investigation of pulsed breakdown morphology [G. Meng et al., Phys. Plasmas 25, 082116 (2018)] by providing further insight into the spatio-temporal dynamics of pulsed gas breakdown for different gap distances using an in-situ electrical-optical measurement method. Time-resolved sequential images and the corresponding photon number distributions are obtained to demonstrate the dynamic evolution of the breakdown channel morphology and the ionization intensity during breakdown development. For a 15 μm gap, breakdown transitions from a spot area on both electrode surfaces to a broad discharge region comprised of filamentary main breakdown channel (~2.00 μm) and surrounding weak ionization area due to the local field enhancement. For a 2 μm gap, it transitions from a thin channel (~1.09 μm) to a wider and uniform channel (~2.14 μm) because the electric field is more uniform at smaller gaps. Interestingly, the main breakdown channel width at the instant of breakdown is independent of the gap width. For the 2 μm gap, field emission dominates the initial stage of breakdown and collision ionization (α process) dominates during breakdown development, while the Townsend avalanche dominates the breakdown process for the 15 μm gap. Finally, we apply a simple asymptotic theory to quantify the relative contribution of these phenomena and predict that breakdown will follow Paschen's law for gaps larger than 17.8 μm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gas breakdown and its scaling law in microgaps with multiple concentric cathode protrusions

This work reports gas breakdown characteristics in microgaps with multiple concentric protrusions on the cathode in the transition from the Townsend to the subnormal glow discharge regime, using a two-dimensional hydrodynamic model. The effects of the protrusion aspect ratio, height, and protrusion spacing on the breakdown voltage are investigated. The results show that when the protrusion spacing is small, the shielding effect can play a more important role in the breakdown voltage rather than the protrusion aspect ratio; the breakdown voltage is more sensitive to the protrusion height and can be assessed by the shortest gap distance. Increasing the protrusion spacing decreases the shielding effect, which lowers the breakdown voltage in both low- and high-pressure regimes. It is found that the breakdown scaling law still holds in geometrically similar microgaps with multiple cathode protrusions despite the electric field distortion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modelica Models for Data Center Cooling Systems

This paper presents a package of Modelica models, which are dedicated to data center cooling systems and recently added to the Modelica Buildings library. To demonstrate the usage of this package, we modeled a chilled water system with an integrated wateside economizer, and an air-cooled direct expansion system with an airside economizer. These models are then applied to evaluate the control performance. After that we performed a detailed comparison in terms of system-level energy efficiency, economizing hours and supply air conditions for the two cooling systems. The advantages and disadvantages of this package are finally summarized and discussed.

Fu, Yangyang↗

Paschen's curve in microgaps with an electrode surface protrusion

Paschen's curve in microgaps with a hemi-ellipsoidal protrusion on the electrode surface is examined using a two-dimensional fluid model. The breakdown voltage is identified when the discharge enters the subnormal region, according to voltage-current characteristics. It is discovered that the breakdown in a microgap with a surface protrusion on the electrode can result in a combined Paschen's curve, which transits from long-gap (distance between the cathode and anode without the presence of protrusion) behavior at low pressure to short-gap (distance between the protrusion apex to the opposite electrode) behavior at high pressure. As gas pressure decreases, the length of the optimal discharge path increases, automatically moving from the top of the protrusion to its side surface and then to the wider non-protrusion electrode gap. The effects of the protrusion height and radius as well as the discharge polarity on the Paschen's curve are viewed in detail. The effects of the protrusion aspect ratio on field enhancement are also considered. Our report provides insights into the design of microgaps with controlled breakdown voltage across many orders in pressure via engineered electrode morphology.

42 ENGINEERING↗

Gas breakdown in atmospheric pressure microgaps with a surface protrusion on the cathode

Gas breakdown in atmospheric pressure microgaps with a cathode surface protrusion is highly sensitive to the protrusion geometry. The breakdown voltage is identified when the discharge enters the subnormal region, according to voltage-current curves calculated by a two-dimensional fluid model. The effects of the protrusion size and the aspect ratio on the gap breakdown voltage are examined. It is found that the protrusion size can have a more profound effect on the breakdown voltage than the protrusion's aspect ratio. The breakdown voltage versus the protrusion aspect ratio will show a minimum value if the aspect ratio varies in a wider range. Shrinking the size of cathode protrusion can increase the breakdown voltage faster than enlarging the gap distance in the absence of a protrusion in the same scale. As a result, the effect of the aspect ratio of the microgap on the breakdown voltage is also presented.

42 ENGINEERING↗

Characterizing the dominant ions in low-temperature argon plasmas in the range of 1–800 Torr

The dominant ions in low-temperature rare gas plasmas can be either molecular ions or atomic ions depending on the discharge regime. Here, the dominant ions in low-temperature argon plasmas are characterized in a wide range of gas pressure (1-800 Torr). The channels for creation of molecular ions include atom assisted association, dissociative recombination, dissociation by atom impact (DAI), and dissociation by electron impact (DEI). The latter two were previously less often considered. It is found that the DEI reaction has a significant impact on the ion fractions, while the effect of the DAI reaction is much less important in the whole investigated gas pressure regime. As the gas pressure increases from 1 to 800 Torr, the atomic ion fraction drops rapidly in conjunction with an increase of the molecular ion fraction. This phenomenon confirms that in low-temperature argon plasmas the dominant ion will be the atomic ion in the low pressure regime but the molecular ion in the high pressure regime. The impact of power density is also investigated in combination with the DEI reaction. The results show that both the DEI reaction and the power density serve to delay the transition trend of the ion fraction, shifting the dominance of molecular ions to a higher pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of surface protrusion on plasma sheath properties in atmospheric microdischarges

The electric field enhancement due to the presence of cathode surface protrusion is investigated in atmospheric microdischarges with the goal of identifying the plasma sheath properties (such as cathode sheath thickness and electric field distortion). The electric field enhancement caused by surface protrusion is examined by adjusting the aspect ratio and the protrusion size. It is found that the cathode electric field enhancement depends strongly (weakly) on the aspect ratio (size) of the protrusion when it is much smaller than the discharge gap distance. In particular, the axial electric field in both vacuum and discharges becomes nonlinear with the protrusion on the cathode. The cathode sheath thicknesses obtained by two different methods are compared. With the same axial (or radial) protrusion dimension, increasing the aspect ratio will result in a significant decrease in the sheath thickness, whereas increasing the axial protrusion size with an unchanged aspect ratio will only lead to a slight decrease in the sheath thickness. The results contribute to predicting the relative plasma sheath properties from the geometrical parameter of the surface protrusion in atmospheric microdischarges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation on the effect of nonlinear processes on similarity law in high-pressure argon discharges

In this paper, the effect of nonlinear processes (such as three-body collisions and stepwise ionizations) on the similarity law in high-pressure argon discharges has been studied by the use of the Kinetic Global Model framework. In the discharge model, the ground state argon atoms (Ar), electrons (e), atom ions (Ar + ), molecular ions (Ar 2 + ), and fourteen argon excited levels Ar*(4s and 4p) are considered. The steady-state electron and ion densities are obtained with nonlinear processes included and excluded in the designed models, respectively. It is found that in similar gas gaps, keeping the product of gas pressure and linear dimension unchanged, with the nonlinear processes included, the normalized density relations deviate from the similarity relations gradually as the scale-up factor decreases. Without the nonlinear processes, the parameter relations are in good agreement with the similarity law predictions. Furthermore, the pressure and the dimension effects are also investigated separately with and without the nonlinear processes. It is shown that the gas pressure effect on the results is less obvious than the dimension effect. Without the nonlinear processes, the pressure and the dimension effects could be estimated from one to the other based on the similarity relations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pressure effect on a tandem hollow cathode discharge in argon

The tandem hollow cathode discharge, formulated by arranging two discharges in series, is an important method used to increase the irradiance of a hollow cathode discharge. Here in this paper, based on a two-dimensional fluid model we studied a five-layer tandem hollow cathode discharge, with three hollow electrodes stacked together and separated by the insulators to obtain the configuration of anode/insulator/cathode/insulator/anode from the top to the bottom. In the model, the thickness of both electrodes and insulators is set at 1 cm and the diameter of the hollow cavity is 2 cm. The pressure effect on the discharge properties is investigated with gas pressure ranges from 100 Pa to 5 kPa. The gap voltage first decreases, reaching a minimum sustaining voltage at 1 kPa, and then increases. Based on the two-dimensional electron density distributions, the discharges parameters (including the electron density, ion density, electric potential, and electric field) of one integrated hollow cathode discharge at 1 kPa and two relatively independent discharges at 100 Pa and 4 kPa are presented, respectively. Lastly, the results indicate that the paralleled hollow cathode discharges can be manipulated into one integrated discharge with a higher plasma density by the monotonous control of gas pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transition characteristics of low-pressure discharges in a hollow cathode

Based on a two-dimensional (2-D) fluid model, the transition processes of discharges in a hollow cathode at low pressure are observed by changing three parameters, i.e., applied voltage U 0 , gas pressure p, and external circuit ballast resistance R b . The voltage-current characteristic curves, electron density distributions, and electric potential distributions of different discharge operating points in a hollow cathode are obtained. The transition processes are characterized by the voltage-current characteristic curves, the electron density distributions, and the electrical potential distributions. The transition modes observed from the voltage-current characteristics include the low-current abnormal mode, normal mode, and high-current abnormal mode. Increasing the applied voltage U0 can have a similar effect on the discharge transition processes to decreasing the ballast resistance. By increasing U0 from 200V to 500V and decreasing Rb from 5000 kX to 100 kX independently, it is observed that the discharge transfers from the outside to the inside of the hollow cavity, thus forming the virtual anode potential. By increasing the gas pressure p from 50 Pa to 5 kPa, the discharge also moves into the hollow cavity from the outside; however, a further increase in the gas pressure leads to the discharge escaping from the hollow cavity. Simulation results and characterizations for different parameters are presented for the transition properties of low-pressure discharges in a hollow cathode. It is verified that the hollow cathode discharge only exists under certain ranges of the above parameters.

42 ENGINEERING↗