Solid oxide fuel cells with cathode functional layers
In various embodiments, a solid oxide fuel cell features a functional layer for reducing interfacial resistance between the cathode and the solid electrolyte.
Engineering topics
Publications and source records attributed to Ding, Dong.
In various embodiments, a solid oxide fuel cell features a functional layer for reducing interfacial resistance between the cathode and the solid electrolyte.
Due to their high activity for methane conversion under a cyclic redox scheme, supported nickel oxides are among the most extensively investigated oxygen carrier materials for chemical looping combustion (CLC) and reforming (CLR) of methane. However, coke formation remains as a key challenge for Ni-containing oxygen carriers. The current study investigates the effect of reducible, spinel-structured supports to enhance coke resistance of NiO-based oxygen carriers. It was hypothesized that reducible supports capable of continued yet slow lattice oxygen donation in the presence of methane can actively retard coke formation on the surface of the oxygen carriers. To evaluate such effects, NiFe 2 O 4 , MgFe 2 O 4 , and BaFe 2 O 4 are investigated as coke-resistant, reducible supports for NiO using mass spectrometry (MS) and thermogravimetric analysis (TGA) during chemical looping cycles. All three reducible supports were capable of continuous oxygen donation over an extended period of time (>40 min) without signs of coke formation. Further, when used as supports for NiO, the resulting oxygen carriers showed no sign of carbon deposition under typical methane CLC environments. In comparison, NiO supported on inert MgAl 2 O 4 exhibited significant coke formation after only 2.5 min. Moreover, NiO supported on NiFe 2 O 4 and BaFe 2 O 4 exhibited faster redox activity and higher oxygen carrying capacity when compared to the inert MgAl 2 O 4 -supported NiO. Detailed investigation of the reduction behavior of NiFe 2 O 4 -supported NiO revealed extensive solid-state reactions and Ni/Fe exchanges among the support, NiO, and newly formed phases. Specifically, initial weight loss in NiFe 2 O 4 -supported NiO was associated with reduction of the oxygen carrier to metallic Ni and Fe 3 O 4 phases. Subsequent coke inhibition was attributed to the slow reduction of Fe 3 O 4 and FeO phases. Multi-cyclic redox studies indicated that NiFe 2 O 4 -supported NiO gradually lost its redox activity. In comparison, both MgFe 2 O 4 - and BaFe 2 O 4 -supported NiO exhibited satisfactory redox stability, activity, and coke resistance.
An IrO 2 -incorporated La 0.8 Sr 0.2 MnO 3 composite has been developed as a novel bifunctional oxygen electrocatalyst with enhanced electrocatalytic activities toward both the OER and ORR due to the synergistic effect among the two materials.
In various embodiments, a solid oxide fuel cell is fabricated in part by disposing a functional layer between the cathode and the solid electrolyte.
The development of a highly active and exceedingly durable electrocatalyst at low cost for the oxygen reduction reaction (ORR) is extremely desirable but remains to be a grand challenge. Over the past decade, the transitional-metal (e.g., Fe, Co, Ni) and N codoped graphene materials have attracted most attention as the state-of-the-art nonprecious-metal-based effective electrocatalyst for ORR but still entail unsatisfactory issues such as moderate activity and life. Herein, the main-group-metal Al and N codoped graphene (ANG) is successfully fabricated via thermal annealing treatment of N-doped graphene with aluminum tri-(8-hydroxyquinoline). As a highly effective electrocatalyst for ORR, the as-prepared ANG exhibits not only high electrocatalytic activity that even outperforms the commercial Pt/C but also good durability in both three-electrode cell and Zn-air battery. Theoretical calculations show that the inhomogeneous charge density distribution and the interaction between Al and N are mainly responsible for the marked enhancement of ORR activity. Finally, the designed ANG electrocatalysts will provide a perspective application in energy storage and promote further exploration of main-group-element-based inexpensive, active, and durable electrocatalysts.
Hydrogen production via water electrolysis using solid oxide electrolysis cells (SOECs) has attracted considerable attention because of its favorable thermodynamics and kinetics. It is considered as the most efficient and low-cost option for hydrogen production from renewable energies. By using proton-conducting electrolyte (H-SOECs), the operating temperature can be reduced from beyond 800 to 600 °C or even lower due to its higher conductivity and lower activation energy. Technical barriers associated with the conventional oxygen-ion conducting SOECs (O-SOECs), that is, hydrogen separation and electrode instability that is primarily due to the Ni oxidation at high steam concentration and delamination associated with oxygen evolution, can be remarkably mitigated. Here, a self-architectured ultraporous (SAUP) 3D steam electrode is developed for efficient H-SOECs below 600 °C. At 600 °C, the electrolysis current density reaches 2.02 A cm –2 at 1.6 V. Instead of fast degradation in most O-SOECs, performance enhancement is observed during electrolysis at an applied voltage of 1.6 V at 500 °C for over 75 h, attributed to the “bridging” effect originating from reorganization of the steam electrode. The H-SOEC with SAUP steam electrode demonstrates excellent performance, promising a new prospective for next-generation steam electrolysis at reduced temperatures.
The development of highly active and durable inexpensive electrocatalysts for hydrogen evolution reaction (HER) is still a formidable challenge. Herein, an ordered hexagonal-closed-packed (hcp)-Ru nanocrystal coated with a thin layer of N-doped carbon (hcp-Ru@NC) was fabricated through the thermal annealing of polydopamine (PDA)-coated Ru nanoparticle (RuNP@PDA). As an alternative to Pt/C catalyst, the hcp-Ru@NC nanocatalyst exhibited the small overpotential of 27.5 mV at a current density of 10 mA cm –2 , as well as long-term stability for HER in acid media. Interestingly, the HER performance of hcp-Ru is highly dependent on its crystallinity. The calculation from density functional theory (DFT) revealed that the difference in HER activity over various exposed surface causes the crystallinity-dependent property of hcp-Ru. The results of this study provided clues to guide the design of Ru-based inexpensive HER electrocatalyst.
The team in Idaho National Laboratory (INL) has made a good progress towards the milestones in this program to support UTRC. This technical report highlights progress by the HydroGEN Super Proton-Conducting High Temperature Electrodes (SPC HTE) Materials Node Capability in the following areas: (1) measurements of conductivities of two BCZY electrolytes; and investigate their stability in moist conditions (50% H 2 O, 200 hours)., (2) development of PBSCF electrode in proton conducting SOEC button-cell device, (3) performance improvement by optimizing micro-structure of steam electrode to achieve the target in milestone, and (4) research plan for the next quarter, to support UTRC HTE project.
Here, the oversupply of ethane, a major component of natural gas liquids, has stimulated the wide applications of ethylene since the shale gas revolution. However, ethylene production is energy-intensive and represents the most energy-consuming single process in the chemical industry. In this communication, we report, for the first time, a novel low-thermal-budget process for the co-production of ethylene and pure hydrogen using a proton-conducting electrochemical deprotonation cell. At a constant current density of 1 A cm –2 , corresponding to a hydrogen production rate of 0.448 mol cm –2 per day, and 400 °C, a close to 100% ethylene selectivity was achieved under an electrochemical overpotential of 140 mV. Compared to an industrial ethane steam cracker, the electrochemical deprotonation process can achieve a 65% saving in process energy and reduce the carbon footprint by as much as 72% or even more if renewable electricity and heat are used. If the heating value of produced hydrogen is taken into account, the electrochemical deprotonation process actually has a net gain in processing energy. The electrochemical deprotonation process at reduced temperatures in the present study provides a disruptive approach for petrochemical manufacturing, shifting the paradigm from thermal chemical practice to a clean energy regime.
Commercialization of solid oxide fuel cells (SOFCs) is impeded by severe cathode degradation from the poisoning effect of contaminants commonly encountered in air (such as H 2 O and CO 2 ) and from other cell components (e.g., Cr species from chromium-containing interconnector). Here we report our findings in unraveling the mechanism of Cr poisoning of La .6 Sr .4 Co .2 Fe .8 O 3 (LSCF) cathodes using our unique in situ/operando surface enhanced Raman spectroscopy. Further, we present an effective strategy to enhancing the tolerance to contaminants poisoning of LSCF cathode through infiltration of a hybrid catalyst coating, which is composed of a conformal film of perovskite PrNi .5 Mn .5 O 3 (PNM) and exsoluted PrO x nano-particles. The coating is catalytically active to oxygen reduction reaction but inert to contaminant poisoning. When subjected to an accelerated Cr-poisoning test, the cells with a hybrid catalyst-coated LSCF cathode show excellent peak power density (P max of 0.71 Wcm -2 ) and significantly enhanced durability (degradation rate of 0.0434% h -1 at 0.7 V), much better than those of cells with a bare LSCF cathode (P max of ~0.46 Wcm -2 and degradation rate of 0.4% h -1 at 0.7 V). The results suggest that surface modification of electrodes with a coating of rationally designed catalysts is a cost-effective approach to dramatically reducing electrode degradation caused by contaminations.
Direct carbon fuel cells (DCFCs) are highly efficient and sustainable power generators fueled by abundant and cheap solid carbons. However, the limited formation of triple phase boundaries (TPBs) within fuel electrode inhibits their performance even at very high temperatures. To address the challenges of low carbon oxidation activity and low carbon utilization simultaneously, a highly efficient anode with 3D solid-state textile framework has been developed to advance the performance of DCFCs at intermediate temperatures. The cells with the 3D textile anode, Gd:CeO 2 -Li/Na 2 CO 3 composite electrolyte, and Sm 0.5 Sr 0.5 CoO 3 (SSC) cathode have demonstrated excellent performance at intermediate temperatures with maximum power densities of 143, 196, and 325 mW cm -2 at 500, 550, and 600°C, respectively. At 500°C, the cells could be operated steadily at a constant polarization current density of 0.15Acm -2 at for approximately 2 hours with a carbon utilization reaching 86%. The significant improvement of the cell performance at low temperatures attributes to the high synergistic conduction of the composite electrolyte and the superior 3D anode structure which offers more paths for carbon catalytic oxidation. Our results indicate the feasibility of directly electrochemical oxidation of solid carbon at 500-600°C with a high carbon utilization and represent a promising strategy to develop 3D architectured electrodes for fuel cells and other electrochemical devices.
Steam electrolysis by solid oxide fuel cell technology, known as SOEC, is considered the most efficient and cost effective option for hydrogen production from renewable sources. By using proton-conducting electrolyte, the SOEC operating temperature can be reduced from over 800oC to below 600oC. Technical barriers associated with the conventional oxygen-ion conducting SOECs, such as hydrogen separation from water, oxidation of steam electrode, and instability of oxygen electrode, can be largely mitigated. In this report, an intermediate temperature (400-600°C) electrolysis technology was developed where a novel proton-conductor and a triple-conducting oxide were used as the electrolyte and anode, respectively. The electrolysis cell demonstrated excellent performance and durability at intermediate temperatures, promising a new prospective for next-generation steam electrolysis.
Co and N co-doped carbon (CNC) material is one of the most promising precious-metal-free catalyst for hydrogen evolution reaction (HER), however, widespread application of CNC will require continuous innovation and optimization of fabrication to maximize electrocatalytic performance, which is always a challenge. Herein, two types of three-dimensional (3D) graphene materials synthesized by one-step of simultaneous doping (Co,N/3DG-1) and two-step of sequential doping (Co,N/3DG-2) respectively, are evaluated and correlated their electrocatalytic activity for HER with experimental parameters. The results indicate that Co,N/3DG-2 exhibits significantly better electrocatalytic activity than Co,N/3DG-1. The structure analysis reveals that Co,N/3DG-2 has more moderate Co-N coordinated number than Co,N/3DG-1. Density functional theory calculations unravels that the equilibrium C and N around Co atom is more favorable to the adsorption and desorption of hydrogen. In conclusion, the results shed new light on the rational design of dual hetero-atom co-doped carbon materials, which may be applicable to other energy conversion and storage systems.
A high performance direct carbon fuel cell is developed, where Ni-Gd 0.1 Ce 0.9 O 2-x cermet, a molten carbonate composite, and Sm 0.5 Sr 0.5 CoO 3 are used as anode, electrolyte, and cathode, respectively. The cell can be operated at relatively low temperatures with power densities of 188, 108 and 48 mWcm -2 being achieved at 600, 550, and 500°C, respectively, when graphite-carbonate and CO 2 -O 2 mixture are used as fuel and oxidant.
The sluggish oxygen reduction reaction (ORR) greatly reduces the energy efficiency of solid oxide fuel cells (SOFCs). In this work, we present our results in dramatically enhancing the ORR kinetics and durability of the state-of-the-art La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) cathode using a hybrid catalyst coating composed of a conformal PrNi 0.5 Mn 0.5 O 3 (PNM) thin film with exsoluted PrOx nanoparticles. At 750 °C, the hybrid catalyst-coated LSCF cathode shows a polarization resistance of ~0.022 Ω cm 2 , about 1/6 of that for a bare LSCF cathode (~0.134 Ω cm 2 ). Further, anode-supported cells with the hybrid catalyst-coated LSCF cathode demonstrate remarkable peak power densities (~1.21 W cm –2 ) while maintaining excellent durability (0.7 V for ~500 h). Near Ambient X-ray Photoelectron Spectroscopy (XPS) and Near Edge X-Ray Absorption Fine Structure (NEXAFS) analyses, together with density functional theory (DFT) calculations, imply that the oxygen-vacancy-rich surfaces of the PrOx nanoparticles greatly accelerate the rate of electron transfer in the ORR whereas the thin PNM film facilitates rapid oxide-ion transport while drastically enhancing the surface stability of the LSCF electrode.
(La 0.6 Sr 0.4 ) 0.95 Co 0.2 Fe 0.8 O 3+δ nanofiber cathode prepared by electrospinning demonstrates excellent oxygen reduction reaction (ORR) activity, as reflected by reduced polarization resistance and diminished activation energy. ORR enhancement can be attributed to the efficient mass/charge transfer. Furthermore, the nanofiber electrode shows good durability under operation conditions of solid oxide fuel cells.