Engineering Papers⌕ Search

Engineering topics

Ding, Dong

Publications and source records attributed to Ding, Dong.

At least 73 records · Page 4

Catalyst coating of a perovskite film and particles exsoluted from the perovskite film

A hybrid catalyst coating composed of a conformal thin film with exsoluted PrOx nano-particles. The conformal PNM thin film can be a perovskite composition of PrNi0.5Mn0.5O3 (PNM). The PrOx nano-particles dramatically enhance the oxygen reduction reaction kinetics via a high concentration of oxygen vacancies while the thin PNM film effectively suppresses strontium segregation from the cathode of an intermediate-temperature solid oxide fuel cell.

Liu, Meilin↗

An Active and Robust Air Electrode for Reversible Protonic Ceramic Electrochemical Cells

Reversible protonic ceramic electrochemical cells (RPCECs) are a promising option for efficient and low-cost generation of electricity and hydrogen. Commercialization of R-PCECs, however, hinges on the development of highly active and robust air electrodes. Here, we report an air electrode consisting of PrBa 0.8 Ca 0.2 Co 2 O 5+δ and in situ exsolved BaCoO 3–δ nanoparticles (PBCC–BCO) that shows minimal polarization resistance (~0.24 Ω cm 2 at 600 °C) and high stability when exposed to humidified air with 3–50% H 2 O. An R-PCEC utilizing PBCC-BCO demonstrates remarkable performances at 600 °C: achieving a peak power density of 1.06 W cm –2 in the fuel cell mode and a current density of 1.51 A cm –2 at 1.3 V in an electrolysis mode. More importantly, the RPCECs demonstrate an exceptionally high durability over 1833 h of continuous operation in the electrolysis mode. Furthermore, this work offers an efficient approach to design of high-performance and durable electrodes for R-PCECs.

25 ENERGY STORAGE↗

Highly Rectifying Fluidic Diodes Based on Asymmetric Layer-by-Layer Nanofilms on Nanochannel Membranes

Nanochannel-based fluidic diodes display ion selectivity and ion-current rectification (ICR), which may prove important in energy harvesting and biosensors. This paper reports asymmetric functionalization of the outer surface of a flexible nanochannel polymer membrane to create fluidic diodes that give ICR. Layer-by-layer (LbL) adsorption with cross-linking of only the underlying part of the polyelectrolyte nanofilm leads to a porosity step across the film. The combination of a high effective surface-charge density and the porosity step in the film leads to a remarkable maximum ICR factor of ~200 with a pH gradient across the film. Incorporation of pH-sensitive polyelectrolyte components enables the ICR factor to increase an order of magnitude on going from pH 8 to pH 3. Furthermore, the coated membrane shows excellent anion-selectivity. Thus, LbL adsorption with partial cross-linking provides a simple method for creating coated nanochannel membranes that serve as pH-responsive ionic diodes for potential chemical/biosensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling the performance and faradaic efficiency of solid oxide electrolysis cells using doped barium zirconate perovskite electrolytes

Y-doped BaZrO 3 (BaZr 1 x Y x O 3 δ , or “BZY”), a proton-conducting ceramic featuring high bulk conductivity and good chemical stability, is a promising electrolyte material for solid oxide electrolysis cells. Further doping with Ce and/or Yb (creating materials “BCZY” and “BCZYYb”) can improve conductivity and sintering properties, but at significant penalty to cells’ faradaic efficiency (FE). Studies have proposed that reduction of lattice Ce can occur in the hydrogen electrode, which consumes some hydrogen produced by the hydrogen evolution reaction, leading to decreased FE. Despite studies suggesting this phenomenon, the mechanism is largely unknown. In this work, we developed a multiphysics model to study the transport of multiple defect species and the performance of BZY, BCZY, and BCZYYb, capturing the tradeoff between enhanced performance at the cost of FE for BCZY and BCZYYb electrolytes compared to BZY. We also found that increasing the water content of the anode gas supply lowers the current output of the cell but results in better FE. The model, which uses several parameters previously unavailable in the literature, was validated to experiments varying temperature, steam water content, and electrolyte material, as well as two performance metrics (performance curves and FE). Results verify and explain observed trends, informing future work on Ce-doped BZY electrolytes.

08 HYDROGEN↗

Carbon Nanotube Supported Amorphous MoS 2 via Microwave Heating Synthesis for Enhanced Performance of Hydrogen Evolution Reaction

Amorphous molybdenum disulfide (MoS 2 ) is a promising electrochemical catalyst for hydrogen evolution reaction (HER) due to more active sites exposed on the surface compared to its crystalline counterpart. In this study, a novel fast three-minute one-pot method is proposed to prepare the single-wall carbon nanotube- (SWCNT-) supported amorphous MoS 2 via a microwave heating process. Compared to traditional hydro- or solvent thermal methods to prepare MoS 2 which usually consume more than 10 hours, it is more promising for fast production. An overpotential at 10 mA/cm 2 of amorphous MoS 2 @SWCNT is 178 mV, which is 99 mV and 22 mV lower than crystalline MoS 2 @SWCNT and pure amorphous MoS 2 , respectively. After running 1000 cycles of polarization, ~2% increase in overpotential is observed, indicating its good stability. The enhanced performance results from the beneficial combination of the SWCNT substrate and the amorphous microstructures. The introduction of SWCNT increases catalyst conductivity and prevents MoS 2 aggregation. The amorphous microstructures of MoS 2 prepared by a microwave heating method lead to more Mo edges or active sites exposed.

Tang, Wei↗

Extended Finite Element Based Approach in Additive Manufacturing Modeling for Optimizing Highly Complex Manifold in Protonic Ceramic Electrochemical Cells

The objective of this project is to develop a novel numerical approach based on the extended finite element method (XFEM) for modeling moving boundaries of material deposited in additive manufacturing (AM) process with improved accuracy and reduced computational cost. One of the major challenges in simulating AM processes is that the boundaries of the computational domain need to change as material is deposited. Previous approaches have achieved this by activating new finite elements, but this requires a high level of mesh refinement to capture small movement of the boundary. XFEM allows the solution boundary to move independently of the mesh, permitting smooth representation of the evolution of the boundary as material is deposited. As a result, this new method will significantly improve the simulation accuracy while reducing the computational cost compared with existing approaches. Furthermore, this project will bring significant improvements for the design and AM process optimization in an iterative fashion among numerical simuation, parameter optimization, and experimental validation. Specifically, this project will support the protonic ceramic electrochemical cells (PCEC) stack development at INL by providing insights into the density, residual stress, thermal and mechanical properties of the PCEC manifold and interconnect, which is critical in enhancing the system lifetime and reducing the overall cost. Upon the success of proposed development and validation of the proposed approach, simulation will be applied to determine an optimal set of AM process parameters for the PCEC manifold production. This project will consolidate Idaho National Laboratory (INL)’s simulation capabilities provided by the MOOSE framework and the Valhalla AM simulation application, with encouraging expansion to emerging PCEC applications and AM technologies at INL and beyond.

97 MATHEMATICS AND COMPUTING↗

Chemical and structural origin of hole states in yttria-stabilized zirconia

Yttria-stabilized zirconia (YSZ) has important electrochemical applications as a fast oxygen ion conductor and is the state-of-the-art electrolyte material for solid oxide fuel/electrolyzer cells. While much attention has been paid to the fast oxygen ion conduction, the electronic conductivity and especially hole carriers are not well understood, yet essential for the electrochemical stability, conduction kinetics and microstructural evolution in YSZ. The present work uses first-principles calculations to illustrate the chemical nature and local structural features of hole states in oxidized YSZ. Three types of hole states have been identified, including delocalized hole states on normal oxygen ions, localized hole states on special oxygen ions with extreme local structures, and peroxide-like groups. In conclusion, the implications on various experimental observations are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultra‐Uniform Nanocrystalline Materials via Two‐Step Sintering

Abstract Nanocrystalline materials with superior properties are of great interest. Much is discussed about obtaining nanograins, but little is known about maintaining grain‐size uniformity that is critical for reliability. An especially intriguing question is whether it is possible to achieve a size distribution narrower than what Hillert theoretically predicted for normal grain growth, a possibility suggested—for growth with a higher growth exponent—by the generalized mean‐field theory of Lifshitz, Slyozov, Wagner (LSW), and Hillert but never realized in practice. Following a rationally designed two‐step sintering route, it has been made possible in bulk materials by taking advantage of the large growth exponent in the intermediate sintering stage to form a uniform microstructure despite residual porosity, and freezing the grain growth thereafter while continuing densification to reach full density. The bulk dense Al 2 O 3 ceramic thus obtained has an average grain size of 34 nm and a size distribution much narrower than Hillert's prediction. Bulk Al 2 O 3 with a grain‐size distribution narrower than the particle‐size distribution of starting powders is also demonstrated, as are highly uniform bulk engineering metals (refractory Mo and W‐Re alloy) and complex functional ceramics (BaTiO 3 ‐based alloys with superior dielectric strength and energy capacity).

Dong, Yanhao↗

Understanding of A-site deficiency in layered perovskites: promotion of dual reaction kinetics for water oxidation and oxygen reduction in protonic ceramic electrochemical cells

Protonic ceramic electrochemical cells (PCECs) are promising solid-state energy conversion devices which enable the conversion of energy between electricity and hydrogen at intermediate temperatures. Rapid conversion between chemical and electrical energy via PCEC technology will assist in overcoming grand challenges in energy storage. To achieve highly efficient reversible operation between hydrogen production and electricity generation, boosting water-oxidation and oxygen reduction activities of the oxygen electrode while maintaining the durable operation is one of the early-stage technical opportunities. In this study, an A-site deficient layered perovskite (PrBa 0.8 Ca 0.2 ) 0.95 Co 2 O 6–δ has been developed as an oxygen electrode for a PCEC which presents superior electrochemical performances. The electrolysis current density reached as high as –0.72 A cm –2 at 1.3 V, and a peak power density of 0.540 W cm –2 was obtained at 600 °C in electrolysis and fuel cell mode, respectively. The PCEC with the new electrode shows good durability under practical operating conditions for 160 hours in both operating modes with no observable degradation. Here, the reversibility between the electrolysis and fuel cell mode is also successfully demonstrated.

30 DIRECT ENERGY CONVERSION↗

Dual Functional Ni3S2@Ni Core-Shell Nanoparticles Decorating Nanoporous Carbon as Cathode Scaffolds for Lithium-Sulfur Battery with Lean Electrolytes

Lithium-sulfur batteries are very promising for next-generation energy storage. However, most studies use flooded electrolytes to achieve a high specific capacity at the expense of lowering the specific energy. Understanding lithium-sulfur battery performance with lean electrolytes is highly desirable. Herein, a modified Pechini method is developed to synthesize a nanoporous carbon host decorated with Ni3S2@Ni particles. Such a cathode delivers enhanced specific capacities with extended cycling life in lean electrolytes, due to the dual functions of the Ni3S2 shell, which can both facilitate reaction kinetics and promote electrolyte wetting. This work highlights a strategy to rationally design cathodes for highenergy lithium-sulfur batteries.

Zhang, Yulun↗

Discovery of single-atom alloy catalysts for CO 2 -to-methanol reaction by density functional theory calculations

The transformations of CO 2 molecules into valuable products are of increasing interest due to the negative impact of anthropogenic CO 2 emissions on global warming. The CO 2 -to-methanol hydrogenation is an economically profitable reaction of carbon fixation, but it still steps away from widespread industrialization because of the lack of efficient and selective catalysts. Recently, single-atom alloy (SAA) catalysts have been developed to work remarkably in CO 2 hydrogenation reactions. Doping isolated single atoms into metallic catalyst can dramatically alter the catalytic performance of the host. Here, we have performed a screening discovery on Ru and 6 RuX (X = Fe, Co, Ni, Cu, Ir and Pt) SAAs using density functional theory (DFT) computations. We considered 13 possible elementary reactions in 4 possible reaction pathways on Ru and all RuX surfaces. In the computed mechanisms, we found that the formation of *H 2 COOH and *HCOO intermediates plays a critical role in determining catalysts’ activities. Doping Co and Pt isolated single atoms into Ru surface can thermodynamically and kinetically facilitate these intermediates formation processes, eventually promoting the production of methanol. The combination of weak binding and enhanced charge redistribution on RuCo and RuPt surfaces give them improved catalytic activities over pure Ru. This work will ultimately facilitate the discovery and development of SAAs for CO 2 to methanol, serving as guidance to experiments and theoreticians alike.

25 ENERGY STORAGE↗

Hydrogen bonding sewing interface

Hydrogen bonding and van der Waals (vdW) forces have been precisely measured and distinguished by an in-house nanomechanical testing system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-sustainable protonic ceramic electrochemical cells using a triple conducting electrode for hydrogen and power production

The protonic ceramic electrochemical cell (PCEC) is an emerging and attractive technology that converts energy between power and hydrogen using solid oxide proton conductors at intermediate temperatures. To achieve efficient electrochemical hydrogen and power production with stable operation, highly robust and durable electrodes are urgently desired to facilitate water oxidation and oxygen reduction reactions, which are the critical steps for both electrolysis and fuel cell operation, especially at reduced temperatures. In this study, a triple conducting oxide of PrNi 0.5 Co 0.5 O 3-δ perovskite is developed as an oxygen electrode, presenting superior electrochemical performance at 400-600°C. More importantly, the self-sustainable and reversible operation is successfully demonstrated by converting the generated hydrogen in electrolysis mode to electricity without any hydrogen addition. The excellent electrocatalytic activity is attributed to the considerable proton conduction, as confirmed by hydrogen permeation experiment, remarkable hydration behavior and computations.

08 HYDROGEN↗

Dual 3D Ceramic Textile Electrodes: Fast Kinetics for Carbon Oxidation Reaction and Oxygen Reduction Reaction in Direct Carbon Fuel Cells at Reduced Temperatures

Abstract Direct carbon fuel cells (DCFCs) are an efficient energy‐conversion technology capable of generating electricity with carbon‐dioxide‐capture chemistry with solid carbon as fuels. The efficiency and performance of DCFCs depend on the kinetics of the carbon oxidation reactions (COR) and the oxygen reduction reactions (ORR), each occurring at anode and cathode, respectively. The limited active sites paired with reduced temperatures greatly decrease the efficiency of the electrochemical reactions. Ultraporous dual‐3D ceramic textiles (dual‐3DCT) are integrated into electrolyte‐supported DCFCs to enhance charge and mass transfer at the electrodes. Improved COR at the anode is achieved by the synergy between the 3DCT NiO–Ce 0.8 Gd 0.2 O 1.95 (GDC) structure and optimal carbon fuel choice. In a comparative study, DCFCs using graphitic carbon (GC) as fuel show the best COR performance when compared to DCFCs utilizing alternative fuels such as carbon black (CB) and activated carbon (AC). The 3DCT Sm 0.5 Sr 0.5 CoO 3‐δ –GDC (SSC–GDC) composite cathode shows electrochemical performance superior to that of the conventional screen‐printed SSC–GDC. A peak power density of 392 mW cm −2 at 600 °C is obtained in a DCFC using the 3DCT‐anode/electrolyte/3DCT‐cathode configuration, an unprecedented value for any reported DCFC as of yet. This points toward promising applications of dual‐3DCT electrodes for reduced‐temperature DCFCs.

Bian, Wenjuan↗