Engineering Papers⌕ Search

Engineering topics

Delvigs, P.

Publications and source records attributed to Delvigs, P..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

PMR polyimide prepreg with improved tack characteristics

Current PMR Polyimide prepreg technology utilizes methanol or ethanol solvents for preparation of the PMR prepreg solutions. The volatility of these solvents limits the tack and drape retention characteristics of unprotected prepreg exposed to ambient conditions. Studies conducted to achieve PMR 15 Polyimide prepreg with improved tack and drape characteristics were described. Improved tack and drape retention were obtained by incorporation of an additional monomer. The effects of various levels of the added monomer on the thermo-oxidative stability and mechanical properties of graphite fiber reinforced PMR 15 composites exposed and tested at 316 C (600 F) were discussed.

Serafini, T. T.↗
NASA NTRS1975

Effects of multifunctional crosslinking agents on the thermomechanical properties of polyimide films

The potential of high temperature resistant polymers such as polyimides (PI) and polyphenylquinoxalines (PPQ) as matrix resins in fiber-reinforced composites has not been fully realized to date. One of the problems associated with these resins is that they exhibit creep, or thermoplastic yielding under load at temperatures approaching 316 C (600 F). The purpose of this investigation was to further reduce thermoplastic behavior of polyimide resins by substituting a controlled amount of the diamine monomer with crosslinking agents having a higher amine functionality. The knowledge gained from a study of the thermomechanical properties of the crosslinked resins would then be used in the fabrication of fiber-reinforced polyimide composites. This report describes the synthesis and characterization of three new polyfunctional amines. Polyimide films containing varying amounts of the cross-linking agents were prepared, and their properties compared with those of control samples prepared with difunctional amines. The effect of crosslink density on isothermal weight loss, polymer softening, and glass transition temperatures is discussed.

Delvigs, P.↗
NASA NTRS1975

Effects of multifunctional crosslinking agents on the thermomechanical properties of polyimide films

Three polyfunctional amines were synthesized. Polyimide films containing varying amounts of the amine crosslinking agents were prepared. Their thermomechanical properties were compared with those of control film samples prepared from difunctional amines. The effect of crosslink density on isothermal weight loss, polymer softening, and glass transition temperature is discussed.

Delvigs, P.↗
NASA NTRS1974

In situ polymerization of monomers for polyphenylquinoxaline/graphite fiber composites

Methods currently used to prepare fiber reinforced, high temperature resistant polyphenylquinoxaline (PPQ) composites employ extremely viscous, low solids content solutions of high molecular weight PPQ polymers. An improved approach, described in this report, consists of impregnating the fiber with a solution of the appropriate monomers instead of a solution of previously synthesized high molecular weight polymer. Polymerization of the monomers occurs in situ on the fiber during the solvent removal and curing stages. The in situ polymerization approach greatly simplifies the fabrication of PPQ graphite fiber composites. The use of low viscosity monomeric type solutions facilitates fiber wetting, permits a high solids content, and eliminates the need for prior polymer synthesis.

Serafini, T. T.↗
NASA NTRS1973

Preparation of polyimides from mixtures of monomeric diamines and esters of polycarboxylic acids

Polyimides having high thermal and oxidative stability are prepared by the reaction of a mixture of monomers comprising (1) a dialkyl or tetraalkyl ester of an aromatic tetracarboxylic acid; (2) an aromatic diamine; and (3) a monoalkyl or dialkyl ester of a dicarboxylic acid where in the ratio of a:b:c is n:(n+1):2, wherein n has a value from 1 to 20. The mixture of monomers is prepared in a 30 to 70 percent by weight solution of an organic solvent, a substrate impregnated with the solution and heated at 50 to 205 C to remove said solvent and form a low molecular weight prepolymer, and thereafter heated at 275 to 350 C to cure to a high molecular weight polyimide.

Serafini, T. T.↗
NASA NTRS1973

Processable high temperature resistant addition type polyimide laminating resins

Basic studies that were performed using model compounds to elucidate the polymerization mechanism of the so-called addition-type (A-type) polyimides are reviewed. The fabrication and properties of polyimide/graphite fiber composites using A-type polyimide prepolymers as the matrix are also reviewed. An alternate method for preparing processable A-type polyimides by means of in situ polymerization of monomer reactants (PMR) on the fiber reinforcement is described. The elevated temperature properties of A-type PMR/graphite fiber composites are also presented.

Serafini, T. T.↗
NASA NTRS1973

Technique for the polymerization of monomers for PPQ/graphite fiber composites

Impregnation of fiber prior to appreciable polymerization completely eliminates impregnation problems encountered with use of high viscosity high molecular weight polyphenylquinoxalines (PPQ) solutions. Major part of polymerization of reactant mixture is conducted on fiber during solvent removal and final curing stages.

Serafini, T. T.↗
NASA NTRS1973

In situ polymerization of monomers for polyphenylquinoxaline/graphite

Methods currently used to prepare fiber reinforced, high temperature resistant polyphenylquinoxaline (PPQ) composites employ extremely viscous, low solids content solutions of high molecular weight PPQ polymers. An improved approach, described in this report, consists of impregnating the fiber with a solution of the appropriate monomers instead of a solution of previously synthesized high molecular weight polymer. Polymerization of the monomers occurs in situ on the fiber during the solvent removal and curing stages. The in situ polymerization approach greatly simplifies the fabrication of PPQ graphite fiber composites. The use of low viscosity monomeric type solutions facilitates fiber wetting, permits a high solids content, and eliminates the need for prior polymer synthesis.

Serafini, T. T.↗
NASA NTRS1973

A review of processable high temperature resistant addition-type laminating resins

An important finding that resulted from research that was conducted to develop improved ablative resins was the discovery of a novel approach to synthesize processable high temperature resistant polymers. Low molecular weight polyimide prepolymers end-capped with norbornene groups were polymerized into thermo-oxidatively stable modified polyimides without the evolution of void producing volatile materials. This paper reviews basic studies that were performed using model compounds to elucidate the polymerization mechanism of the so-called addition-type polyimides. The fabrication and properties of polyimide/graphite fiber composites using A-type polyimide prepolymer as the matrix are described. An alternate method for preparing processable A-type polyimides by means of in situ polymerization of monomeric reactants on the fiber reinforcement is also described. Polyimide/graphite fiber composite performance at elevated temperatures is presented for A-type polyimides.

Serafini, T. T.↗
NASA NTRS1972

Addition-type polyimides from solutions of monomeric reactants

The monomeric reactants approach was used to fabricate addition-type polyimide/graphite fiber composites with improved mechanical properties and thermal stability characteristics over those of composites derived from addition-type amide acid prepolymers. A screening study of 24 different monomer combinations was performed. The results of a more extensive investigation of a selected number of monomer combinations showed that the combination providing the best thermomechanical properties was 5-norbornene-2,3-dicarboxylic acid monomethyl ester/4,4'-methylenedianiline/3,3'4,4'-benzophenone tetracarboxylic acid dimethyl ester at a molar ratio of 2/3.09/2.09.

Delvigs, P.↗
NASA NTRS1972

Thermally stable polyimides from solutions of monomeric reactants

A method for preparing thermally stable resin-fiber-reinforced composites by using solutions of appropriate monomers is described. Solutions containing a dimethyl ester of an aryl tetracarboxylic acid, the monomethyl ester of nadic acid, and an aryl diamine were used to impregnate graphite fibers. Composites fabricated from these prepregs exhibited excellent thermo-oxidative stability and retention of mechanical properties at 315 C (600 F). These results compare favorably to those obtained from composites made from amide-acid prepolymers capped with reactive alicyclic rings. Monomeric solutions provide excellent shelf life and improved solubility compared to amide-acid prepolymer solutions.

Serafini, T. T.↗
NASA NTRS1972

Addition-type polyimides from solutions of monomeric reactants

The monomeric reactants approach was used to fabricate addition-type polyimide/graphite fiber composites with improved mechanical properties and thermal stability characteristics over those of composites derived from addition-type amide acid prepolymers. A screening study of 24 different monomer combinations was performed. The results of a more extensive investigation of a selected number of monomer combinations showed that the combination providing the best thermomechanical properties was 5-norbornene-2.3-dicarboxylic acid monomethyl ester/4,4(')-methylenedianiline/3,3(')4,4(')-benzophenonetetracarboxylic acid dimethyl ester at a molar ratio of 2/3.09/2.09.

Delvigs, P.↗
NASA NTRS1972

Addition-type polyimides from solutions of monomeric reactants.

The monomeric reactants approach was used to fabricate addition-type polyimide/graphite fiber composites with improved mechanical properties and thermal stability characteristics over those of composites derived from addition-type amide acid prepolymers. A screening study of 24 different monomer combinations was performed. The results of a more extensive investigation of a selected number of monomer combinations showed that the combination providing the best thermomechanical properties was 5-norbornene-2,3-dicarboxylic acid monomethyl ester/4,4'-methylenedianiline/3,3'4,4'-benzophenonetetracarboxylic acid dimethyl ester at a molar ratio of 2/3.09/2.09.

Delvigs, P.↗