Engineering topics
Publications and source records attributed to David Rinehart.
Wind tunnel modifications consisting of the introduction of new turning vanes, baffles, diffuser, and test section were completed in 2019. Wind tunnel characterization best practices require a full characterization test entry following any of these modifications.
The quality of static pressure ports has historically been shown to be capable of biasing the resulting measurements of static pressure over the surface. Some of the flaws in the port quality can be recognized visually through magnified imaging of the port with a microscope. Through digital analyses of images of a large quantity of existing pressure ports and estimation of the deviations from the true static pressure for each port, a correlation could potentially be constructed to estimate whether a port will generate a significant error based upon its surface-level appearance. This presentation pursues this hypothesis through attempted correlation of subsonic data collected on the 4-inch-diameter cone cylinder during the 2019 characterization tests in the NASA Glenn Research Center's 8- by 6-Foot Supersonic Wind Tunnel (8x6 SWT).
The flow quality parameters study is an investigation into the importance of flow quality parameters and the current ability of wind tunnel characterization personnel to measure those parameters. The study is divided into five flow regimes, low-speed, subsonic, transonic, supersonic, and hypersonic. This presentation provides an overview of the results for the low-speed flow regime and prompts for a discussion about how to best proceed with the study.