Engineering Papers⌕ Search

Engineering topics

Cui, Yi

Publications and source records attributed to Cui, Yi.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

An ultrathin ionomer interphase for high efficiency lithium anode in carbonate based electrolyte

High coulombic efficiency and dendrite suppression in carbonate electrolytes remain challenges to the development of high-energy lithium ion batteries containing lithium metal anodes. Here we demonstrate an ultrathin (≤100 nm) lithium-ion ionomer membrane consisting of lithium-exchanged sulfonated polyether ether ketone embedded with polyhedral oligosilsesquioxane as a coating layer on copper or lithium for achieving efficient and stable lithium plating-stripping cycles in a carbonate-based electrolyte. Operando analyses and theoretical simulation reveal the remarkable ability of the ionomer coating to enable electric field homogenization over a considerably large lithium-plating surface. The membrane coating, serving as an artificial solid-electrolyte interphase filter in minimizing parasitic reactions at the electrolyte-electrode interface, enables dendrite-free lithium plating on copper with outstanding coulombic efficiencies at room and elevated (50 °C) temperatures. The membrane coated copper demonstrates itself as a promising current collector for manufacturing high-quality pre-plated lithium thin-film anode.

25 ENERGY STORAGE↗
DOE OSTI2019

In situ and operando investigation of the dynamic morphological and phase changes of a selenium-doped germanium electrode during (de)lithiation processes

To understand the effect of selenium doping on the good cycling performance and rate capability of a Ge 0.9 Se 0.1 electrode, the dynamic morphological and phase changes of the Ge 0.9 Se 0.1 electrode were investigated by synchrotron-based operando transmission X-ray microscopy (TXM) imaging, X-ray diffraction (XRD), and X-ray absorption spectroscopy (XAS). The TXM results show that the Ge 0.9 Se 0.1 particle retains its original shape after a large volume change induced by (de)lithiation and undergoes a more sudden morphological and optical density change than pure Ge. The difference between Ge 0.9 Se 0.1 and Ge is attributed to a super-ionically conductive Li–Se–Ge network formed inside Ge 0.9 Se 0.1 particles, which contributes to fast Li-ion pathways into the particle and nano-structuring of Ge as well as buffering the volume change of Ge. The XRD and XAS results confirm the formation of a Li–Se–Ge network and reveal that the Li–Se–Ge phase forms during the early stages of lithiation and is an inactive phase. The Li–Se–Ge network also can suppress the formation of the crystalline Li 15 Ge 4 phase. Finally, these in situ and operando results reveal the effect of the in situ formed, super-ionically conductive, and inactive network on the cycling performance of Li-ion batteries and shed light on the design of high capacity electrode materials.

25 ENERGY STORAGE↗
DOE OSTI2019

The Long Noncoding RNA Paupar Modulates PAX6 Regulatory Activities to Promote Alpha Cell Development and Function

Many studies have highlighted the role of dysregulated glucagon secretion in the etiology of hyperglycemia and diabetes. Accordingly, understanding the mechanisms underlying pancreatic islet ? cell development and function has important implications for the discovery of new therapies for diabetes. In this study, comparative transcriptome analyses between embryonic mouse pancreas and adult mouse islets identified several pancreatic lncRNAs that lie in close proximity to essential pancreatic transcription factors, including the Pax6-associated lncRNA Paupar. We demonstrate that Paupar is enriched in glucagon-producing ? cells where it promotes the alternative splicing of Pax6 to an isoform required for activation of essential ??cell genes. Consistently, deletion of Paupar in mice resulted in dysregulation of PAX6 ? cell target genes and corresponding ? cell dysfunction, including blunted glucagon secretion. These findings illustrate a distinct mechanism by which a pancreatic lncRNA can coordinate glucose homeostasis by cell-specific regulation of a broadly expressed transcription factor.

diabetes, pancreatic islets, glucagon, alpha cells↗
DOE OSTI2019

Synthesis, Applications and Potential Photoluminescence Mechanism of Spectrally Tunable Carbon Dots

Due to the prominent characteristics of carbon-based luminescent nanostructures (known colloquially as carbon dots), such as inexpensive precursors, excellent hydrophilicity, low toxicity, and intrinsic fluorescence, these nanomaterials are regarded as potential candidates to replace traditional quantum dots in some applications. As such, research in the field of carbon dots has been increasing in recent years. In this mini-review, we summarize recent progress in studies of multicolor carbon dots focusing on potential photoluminescence mechanisms, strategies for effective syntheses, and applications in ion/molecule and temperature sensing, and high-resolution bioimaging techniques.

Zhi, Bo↗
DOE OSTI2019

Minimized lithium trapping by isovalent isomorphism for high initial Coulombic efficiency of silicon anodes

Silicon demonstrates great potential as a next-generation lithium ion battery anode because of high capacity and elemental abundance. However, the issue of low initial Coulombic efficiency needs to be addressed to enable large-scale applications. There are mainly two mechanisms for this lithium loss in the first cycle: the formation of the solid electrolyte interphase and lithium trapping in the electrode. The former has been heavily investigated while the latter has been largely neglected. Here, through both theoretical calculation and experimental study, we demonstrate that by introducing Ge substitution in Si with fine compositional control, the energy barrier of lithium diffusion will be greatly reduced because of the lattice expansion. This effect of isovalent isomorphism significantly reduces the Li trapping by ~70% and improves the initial Coulombic efficiency to over 90%. We expect that various systems of battery materials can benefit from this mechanism for fine-tuning their electrochemical behaviors.

25 ENERGY STORAGE↗
DOE OSTI2019

Improved Oxygen Reduction Reaction Activity of Nanostructured CoS 2 through Electrochemical Tuning

Searching for efficient Pt-free oxygen reduction reaction (ORR) electrocatalysts has been actively pursued among the current electrocatalyst research community. The family of transition-metal chalcogenides, especially cobalt disulfide (CoS 2 ), has been reported as competitive ORR catalysts. In this work, we perform a detailed analysis of the intrinsic activity in terms of onset potentials and selectivity toward hydrogen peroxide of CoS 2 in both acid and alkaline medium. Our detailed characterizations of this system via X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and calculated bulk and surface thermodynamics and ORR mechanism reveal pH-dependent electrochemical evolution of the CoS 2 surfaces. Using XPS results before and after ORR in combination with density functional theory (DFT) calculations for individual surfaces reveals sulfur to oxygen substitution, and partial dissolution occurs in acidic media, while thin cobalt oxide films supported by CoS 2 are formed in alkaline media. The comprehensive DFT calculations of the ORR activities on these systems reveal that sulfur is an unlikely ORR active site, while undercoordinated Co metal site in the CoS 2 is less active than very active undercoordinated Co metal site in the Co oxide film. Using these guiding principles, we then demonstrate that electrochemical lithium (Li) tuning of CoS 2 in organic electrolyte increases its ORR performance in both acid and alkaline medium. Detailed characterizations demonstrate that the grain size of CoS 2 particle is considerably reduced and has a much richer surface oxygen content after electrochemical Li tuning (LiET-CoS 2 ) as the direct consequence of the Li galvanostatic cycling. The general efficacy of this method toward transition-metal chalcogenides (T-M-X) is further demonstrated by enhanced ORR activities of CoS and Ni 3 S 2 in alkaline and neutral medium, respectively. This work opens up an opportunity for probing more advanced T-M-X-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Artificial Solid Electrolyte Interphase for Suppressing Surface Reactions and Cathode Dissolution in Aqueous Zinc Ion Batteries

Vanadium-based compounds have been widely used as electrode materials in aqueous zinc ion batteries (ZIBs) due to the multiple oxidation states of vanadium and their open framework structure. However, the solubility of vanadium in aqueous electrolytes and the formation of byproducts during the charge/discharge process cause severe capacity fading and limit cycle life. Here in this paper, we report an ultrathin HfO 2 film as an artificial solid electrolyte interphase (SEI) that is uniformly and conformally deposited by atomic layer deposition (ALD). The inactive hafnium(IV) oxide (HfO 2 ) film not only decreases byproduct (Zn 4 SO 4 (OH) 6 ·xH 2 O) formation on the surface of Zn 3 V 2 O 7 (OH) 2 ·2H 2 O (ZVO) but also suppresses the ZVO cathode dissolution in the electrolyte. As a result, the obtained HfO 2 -coated ZVO cathodes deliver higher capacity and better cycle life (227 mAh g –1 @100 mA g –1 , 90% retention over 100 cycles) compared with pristine ZVO (170 mAh g –1 @100 mA g –1 , 45% retention over 100 cycles). A mechanistic investigation of the role of HfO 2 is presented, along with data showing that our method constitutes a general strategy for other cathodes to enhance their performance in aqueous ZIBs.

25 ENERGY STORAGE↗
DOE OSTI2019

Two-dimensional inorganic molecular crystals

Two-dimensional molecular crystals, consisting of zero-dimensional molecules, are very appealing due to their novel physical properties. However, they are mostly limited to organic molecules. The synthesis of inorganic version of two-dimensional molecular crystals is still a challenge due to the difficulties in controlling the crystal phase and growth plane. Here, we design a passivator-assisted vapor deposition method for the growth of two-dimensional Sb 2 O 3 inorganic molecular crystals as thin as monolayer. The passivator can prevent the heterophase nucleation and suppress the growth of low-energy planes, and enable the molecule-by-molecule lateral growth along high-energy planes. Using Raman spectroscopy and in situ transmission electron microscopy, we show that the insulating α-phase of Sb 2 O 3 flakes can be transformed into semiconducting β-phase under heat and electron-beam irradiation. Our findings can be extended to the controlled growth of other two-dimensional inorganic molecular crystals and open up opportunities for potential molecular electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2019

High-Energy-Density Solid-Electrolyte-Based Liquid Li-S and Li-Se Batteries

Lithium-sulfur (Li-S) and Lithium-selenium (Li-Se) batteries are considered as promising candidates for next-generation battery technologies, as they have high energy density and low cost. However, due to the use of a solid Li-metal anode and a liquid organic electrolyte, the current Li-S and Li-Se batteries face several issues in terms of Coulombic efficiency and cycling stability, which seriously impeded their development. Here, we report solid-electrolyte-based liquid Li-S and Li-Se (SELL-S and SELL-Se in short) batteries. The batteries use a Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) ceramic tube as electrolyte and work at temperatures higher than the melting point of Li; thus, polysulfide or polyselenide shuttle effects and Li dendrite growth are effectively prevented, and high energy density, together with high stability, fast charge/discharge capability, high Coulombic efficiency, and high energy efficiency, can be achieved. The SELL-S and SELL-Se batteries provide broader platforms for constructing high-energy, high-power, long-lifetime, and low-cost energy storage.

25 ENERGY STORAGE↗
DOE OSTI2019

Lithium Metal Anode Materials Design: Interphase and Host

Abstract Li metal is the ultimate anode choice due to its highest theoretical capacity and lowest electrode potential, but it is far from practical applications with its poor cycle lifetime. Recent research progresses show that materials designs of interphase and host structures for Li metal are two effective ways addressing the key issues of Li metal anodes. Despite the exciting improvement on Li metal cycling capability, problems still exist with these methodologies, such as the deficient long-time cycling stability of interphase materials and the accelerated Li corrosion for high surface area three-dimensional composite Li anodes. As a result, Coulombic efficiency of Li metal is still not sufficient for full-cell cycling. In the near future, an interphase protected three-dimensional composite Li metal anode, combined with high performance novel electrolytes might be the ultimate solution. Besides, nanoscale characterization technologies are also vital for guiding future Li metal anode designs. Graphic Abstract

Wang, Hansen↗
DOE OSTI2019

Nanodiamonds for energy

Abstract Carbon materials have been playing important roles in advancing energy‐related technologies and offering great promise to addressing the rising global energy demands and environmental issues. Nanodiamonds, an exciting class of carbon materials, with excellent mechanical, chemical, electronic, and optical properties, have great potentials in energy‐related applications. In this contribution, we summarized some of the recent progress on nanodiamonds for energy storage, conversion, and other related applications in sustainable energy research. We discussed the promising opportunities and outlooks for nanodiamonds in energy‐related fields.

Wang, Hongxia↗
DOE OSTI2019

Nanowires for Electrochemical Energy Storage

Nanomaterials provide many desirable properties for electrochemicalenergy storage devices due to their nanoscale size effect, which could be significantlydifferent from bulk or micron-sized materials. Particularly, confined dimensions playimportant roles in determining the properties of nanomaterials, such as the kinetics ofion diffusion, the magnitude of strain/stress, and the utilization of active materials.Nanowires, as one of the representative one-dimensional nanomaterials, have greatcapability for realizing a variety of applications in thefields of energy storage since theycould maintain electron transport along the long axis and have a confinement effectacross the diameter. In this review, we give a systematic overview of the state-of-the-artresearch progress on nanowires for electrochemical energy storage, from rational designand synthesis,in situstructural characterizations, to several important applications inenergy storage including lithium-ion batteries, lithium-sulfur batteries, sodium-ionbatteries, and supercapacitors. The problems and limitations in electrochemical energystorage and the advantages in utilizing nanowires to address the issues and improve thedevice performance are pointed out. At the end, we also discuss the challenges and demonstrate the prospective for the futuredevelopment of advanced nanowire-based energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2019

Nonpolar Alkanes Modify Lithium‐Ion Solvation for Improved Lithium Deposition and Stripping

Abstract Lithium metal batteries have been plagued by the high reactivity of lithium. Reactive additives that can passivate the lithium metal surface and limit electrolyte accessibility to a fresh lithium surface have been widely explored, but can have limited utility with continuous consumption of the additive. In this work, an alternative strategy is explored. The use of nonreactive cosolvents such as nonpolar alkanes is studied and its is shown that hexane and cyclohexane addition to ether solvents (1,3‐dioxolane and 1,2‐dimethoxyethane) halves the nucleation and growth overpotentials for lithium deposition, increases the cell coulombic efficiency, improves the lithium deposition morphology, increases the electrolyte oxidative stability (>0.2 V), and doubles the cycle life—even when compared to a widely used fluorinated ether. The nonpolar alkanes modify the lithium‐ion solvation environment and reduce the solvation free energy; hence reducing the reaction barrier for lithium deposition. Exploration of nonpolar alkanes as part of the electrolyte mixture is a promising strategy for controlling metal deposition.

Amanchukwu, Chibueze V.↗
DOE OSTI2019

PVMI Bay Area Photovoltaic Consortium (Final Report)

The Bay Area Photovoltaic Consortium (BAPVC) was formed to fund university research on technologies industry will use and thereby investigate new ways for the photovoltaic (PV) industry and university scientists to identify and explore research priorities. Our thesis is that great innovation is more likely stimulated by the collective efforts of manufacturing and academic experts working together rather than direction from either community alone. The consortium is quite effective in promoting the interactions needed to form collaborative teams, often engaging industry members as research participants. All similar university research consortia employ their industry members in advisory capacity. In BAPVC, industry members deliver far more than guidance and advice. They are part of the management team. They review and down select proposals, review projects, and guide the university researchers is setting their research directions. The BAPVC Industry Board holds executive authority over the strategy and operations of the consortium. BAPVC is a consortium led by Stanford University (SU) and University of California at Berkeley (UCB) joined by three leading DOE labs—Lawrence Berkeley National Laboratory, SLAC National Laboratory, and the National Renewable Energy Lab. BAPVC’s success is attributed to its three pillars of support. Three Pillars: (1) Industry sets research agenda, assures relevance, provides path to commercial impact, and contributes funding. (2) Universities and National Labs conduct innovative research and provide workforce development. (3) US Department of Energy provides leadership, support and guidance. Since inception in 2011, BAPVC funded 72 projects involving 26 organizations. Bringing together the differing backgrounds of industry and university participants stimulates innovation. BAPVC’s cultivation of larger collaborative projects among university investigators has also produced notable results. This report will highlight BAPVC contributions in several exciting PV technologies including perovskite/silicon tandem cells, CdTe, reliability and adhesion metrology, ultra-thin silicon cells and application of carrier selective contacts in silicon PV that all owe a portion of their success to cross-consortium collaboration. More importantly, many of the BAPVC-fostered teams have successfully bid for additional support from other sources and continue to expand their productivity. In one case, we report a recent Nature Energy paper published by a team including both university members and two industry members (separate companies) in a collaborative analysis of thin-film tandem cells. Our original proposal set ambitious goals – “BAPVC is composed of the industry members and prestigious universities needed to add substantial value to the open and competitive process of providing universities all over the nation with funding to perform industry-relevant R&D…Our consortium will accelerate the coordination of stakeholders across the solar industry and academic sectors into a cohesive research force developing innovative solutions to the key industrial issues.” While the PV landscape has undergone vast change during the period of this award, BAPVC and its research and industry members have adapted, delivering the promised cohesive research force for the benefit of DOE and the public.

14 SOLAR ENERGY↗
DOE OSTI2019

Monolithic solid–electrolyte interphases formed in fluorinated orthoformate-based electrolytes minimize Li depletion and pulverization

Lithium (Li) pulverization and associated large volume expansion during cycling is one of the most critical barriers for the safe operation of Li-metal batteries. Here, we report an approach to minimize the Li pulverization using an electrolyte based on a fluorinated orthoformate solvent. The solid–electrolyte interphase (SEI) formed in this electrolyte clearly exhibits a monolithic feature, which is in sharp contrast with the widely reported mosaic- or multilayer-type SEIs that are not homogeneous and could lead to uneven Li stripping/plating and fast Li and electrolyte depletion over cycling. The highly homogeneous and amorphous SEI not only prevents dendritic Li formation, but also minimizes Li loss and volumetric expansion. Furthermore, this new electrolyte strongly suppresses the phase transformation of the LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode (from layered structure to rock salt) and stabilizes its structure. In conclusion, tests of high-voltage Li||NMC811 cells show long-term cycling stability and high rate capability, as well as reduced safety concerns.

25 ENERGY STORAGE↗