Engineering topics

Cox, Sarah

Publications and source records attributed to Cox, Sarah.

4 records

NASA NTRS2018

Composite Bonded Joint: Repair Development

This report documents the details of my work as a NASA KSC intern for the Fall Session from August 27th to December 14th, 2018. My efforts and contributions were with the Materials Science Branch, a staffed organization within the Laboratories, Development, & Testing (NE-L) Division of the Engineering Directorate. The principle responsibilities of the Materials Science group are to support the design, development, and operations activities for materials and processes with the purpose of providing unique solutions for flight hardware, ground support equipment, and customer requests. My role as an intern focused on assisting engineers in developing repair processes to mature bonded joint technology in support of SLS ? scale hardware. My primary goals for this internship were to become more familiar with composite materials and learn more about processes I was unfamiliar with, such as prepregs and out-of-autoclave processing. This project allowed me to learn new skills such as scarfing and curing composites. Additional goals I had were to learn more about NASA's laboratories and projects under development. This internship not only provided me with those experiences, but also allowed me to build relationships with inspiring engineers; a takeaway I will never forget.

Composite Materials↗

NASA NTRS2015

Composites at KSC

This is a short presentation on the Composites work that has recently been performed in the Materials Science Divisionat Kennedy Space Center. Topics include Residual Stress, Repair, and Plant Habitat Growth Chamber Fabrication.

Composites↗

NASA NTRS2014

Processing and Characterization of Basalt Fiber Reinforced Ceramic Composites for High Temperature Applications Using Polymer Precursors

The development of high temperature structural composite materials has been very limited due to the high cost of the materials and the processing needed. Ceramics can take much higher temperatures, but they are difficult to produce and form in bulk volumes. Polymer Derived Ceramics (PDCs) begin as a polymer matrix, allowing a shape to be formed, to be cured, and be pyrolized in order to obtain a ceramic with the associated thermal and mechanical properties. The two PDCs used in this development are polysiloxane and polycarbosilane. Polysiloxanes contain a silicon oxycarbide backbone when pyrolized up to 1000degC. Polycarbosilane, an organosilicon polymer, contain a silicon-carbon backbone; around 1200degC, -SiC begins to crystallize. The use of basalt in structural and high temperature applications has been under development for over 50 years, yet there has been little published research on the incorporation of basalt fibers as a reinforcement in composites. Basalt is a naturally occurring material found in volcanic rock. Continuous basalt fiber reinforced PDCs have been fabricated and tested for the applicability of this composite system as a high temperature structural composite material. Testing for this included thermal and mechanical testing per ASTM standard tests.

High Temperature Composites↗

NASA NTRS2012

Stress Free Temperature Testing and Residual Stress Calculations on Out-of-Autoclave Composites

Future launch vehicles will require the incorporation large composite parts that will make up primary and secondary components of the vehicle. NASA has explored the feasibility of manufacturing these large components using Out-of-Autoclave impregnated carbon fiber composite systems through many composites development projects. Most recently, the Composites for Exploration Project has been looking at the development of a 10 meter diameter fairing structure, similar in size to what will be required for a heavy launch vehicle. The development of new material systems requires the investigation of the material properties and the stress in the parts. Residual stress is an important factor to incorporate when modeling the stresses that a part is undergoing. Testing was performed to verify the stress free temperature with two-ply asymmetric panels. A comparison was done between three newly developed out of autoclave IM7 /Bismalieimide (BMI) systems. This paper presents the testing results and the analysis performed to determine the residual stress of the materials.

Cox, Sarah↗