Engineering Papers⌕ Search

Engineering topics

Collins, Emory D

Publications and source records attributed to Collins, Emory D.

41 records · Page 3

Advanced Head End for the Treatment of Used LWR Fuel

A novel dry head-end process is being developed. The main goals are the separation of cladding from fuel and the upfront removal of problematic fission products while facilitating the downstream processing. Cold tests using surrogate pellets and tests on a scale of tens of milligrams using actual used fuel are very promising. The initial tests showed that the process can be performed at significantly lower temperatures than those for standard voloxidation by using a mixture of NO{sub 2}/O{sub 2} or NO{sub 2}/O{sub 3} to produce a fine red powder of UO{sub 3} and to release all the tritium and iodine. This powder - containing the uranium as UO{sub 3}, transuranium actinides, and nonvolatile fission product oxides - is readily soluble in dilute acids. Alternatively, the tests showed that the UO{sub 3} powder can be contacted with NO{sub 2}(N{sub 2}O{sub 4}) gas or liquid at room temperature to produce metal nitrates.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Analysis of the Reuse of Uranium Recovered from the Reprocessing of Commercial LWR Spent Fuel

This report provides an analysis of the factors involved in the reuse of uranium recovered from commercial light-water-reactor (LWR) spent fuels (1) by reenrichment and recycling as fuel to LWRs and/or (2) by recycling directly as fuel to heavy-water-reactors (HWRs), such as the CANDU (registered trade name for the Canadian Deuterium Uranium Reactor). Reuse is an attractive alternative to the current Advanced Fuel Cycle Initiative (AFCI) Global Nuclear Energy Partnership (GNEP) baseline plan, which stores the reprocessed uranium (RU) for an uncertain future or attempts to dispose of it as 'greater-than-Class C' waste. Considering that the open fuel cycle currently deployed in the United States already creates a huge excess quantity of depleted uranium, the closed fuel cycle should enable the recycle of the major components of spent fuel, such as the uranium and the hazardous, long-lived transuranic (TRU) actinides, as well as the managed disposal of fission product wastes. Compared with the GNEP baseline scenario, the reuse of RU in the uranium fuel cycle has a number of potential advantages: (1) avoidance of purchase costs of 11-20% of the natural uranium feed; (2) avoidance of disposal costs for a large majority of the volume of spent fuel that is reprocessed; (3) avoidance of disposal costs for a portion of the depleted uranium from the enrichment step; (4) depending on the {sup 235}U assay of the RU, possible avoidance of separative work costs; and (5) a significant increase in the production of {sup 238}Pu due to the presence of {sup 236}U, which benefits somewhat the transmutation value of the plutonium and also provides some proliferation resistance.

DelCul, Guillermo Daniel↗

Preliminary Results of Voloxidation Processing of Kilogram Quantities of Used Nuclear Fuel

Advanced nuclear fuel processing methodologies are being studied as part of the Advanced Fuel Cycle Initiative (AFCI) program at ORNL. To support this initiative, processes and equipment were deployed at ORNL to perform all steps in the recycle process on actual used nuclear fuels, ranging from used fuel receipt to production of products and waste forms at the kilogram-scale (with capacity to process 20 kg of used fuel per year in up to four campaigns). In the first campaign, approximately 4 kg of used fuel was processed. As previously reported, the head-end processing was completed using saw-segmented Dresden fuel in lab-scale equipment in multiple batches. The second processing campaign used a new single pin shear and a new bench-scale voloxidizer to perform the dry head-end treatment prior to fuel dissolution. Approximately ~5 kg of used fuel (heavy metal basis) was processed in the second campaign. Two different fuels were oxidized in three separate batches to provide a range of processing conditions. The material used for each batch and general processing conditions are summarized in Table 1. Progress of the oxidation reaction was monitored continuously by two primary measurements; the concentration of oxygen in the effluent stream which was depressed as the oxygen was consumed, and the concentration of krypton-85 in the effluent stream as measured by a gamma counter on the off-gas pipeline. Table 1. Voloxidation test conditions for second campaign. Batch Fuel Source Burnup (GWd/MT)Batch size (kg*)/(kg**)Segment Length (in) Oxidation GasOperation Temperature ( C) 1Surry-2361.223/1.7041.0Air500 2North Anna63 702.071/2.8850.88Air600 3North Anna63 702.012/2.8030.88Oxygen600 * Heavy metal basis. ** Total fuel (oxide + cladding) basis. Fission product gases evolved from the fuel during the oxidation process were trapped for subsequent chemical and radiochemical analysis. The series of traps included a bed of molecular sieves to recover tritium (as HTO), silver-substituted zeolite to capture iodine (e.g. as AgI), a caustic scrubber to collect carbon dioxide (including 14CO2), a hydrogen-substituted mordenite to capture krypton (e.g. 85Kr) by cryogenic temperature swing adsorption, and a silver-substituted mordenite to capture xenon by cryogenic temperature swing absorption. The quantities of these volatile gases collected were compared to ORIGEN calculations to estimate the effectiveness of the voloxidation process to separate the volatiles from the used fuel. This paper will describe the voloxidation system and present preliminary results from the second processing campaign.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced Fuel Cycle Treatment, Recycling, and Disposal of Nuclear Waste

Nuclear waste, in the form of used and spent nuclear fuel, is currently being stored in the U.S., mostly at reactor sites to await future direct disposal or treatment to permit recycle of re-usable components and minimization of wastes requiring geologic disposal. The used fuel is currently accumulating at a rate of over 2,000 tons per year and a total of over 60,000 tons is in storage. New dry storage capacity is estimated to cost {approx} $0.6 B per year. Technologies have been developed and deployed worldwide to treat only a portion of the nuclear waste that is generated. Recent research, development, and systems analysis studies have shown that nuclear waste treatment could be done at the rate of generation in a safe, environmentally friendly, and cost-effective manner. These studies continue to show that major benefits can be obtained by allowing the used fuel assemblies to remain in safe storage for 30 years or longer before treatment. During this time, the radioactivity and decay heat generation decrease substantially, such that the separations process can be simplified and made less costly, waste gases containing {sup 85}Kr can be released below regulatory limits, and the solid fission product wastes containing {sup 137}Cs and {sup 90}Sr require decay storage for a much shorter time-period before geologic disposal. In addition, the need for separating curium from americium and for extra purification cycles for the uranium and uranium-plutonium-neptunium products is greatly diminished. Moreover, during the 30+ years of storage prior to treatment, the quality of the recyclable fuel is only degraded by less than 5 percent. The 30+ year storage period also enables recycle of long-lived transuranic actinides to be accomplished in existing light water reactors without waiting on and incurring the cost of the development, licensing, and deployment of future Gen IV reactors. Overall, the safety, environmental, and cost benefits of treating the longer aged used nuclear wastes are substantial.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CETE R&D at Oak Ridge National Laboratory Supporting Management of Nuclear Waste - 9227

Oak Ridge National Laboratory (ORNL) is conducting a complete, coupled end-to-end (CETE) demonstration of advanced nuclear fuel reprocessing to support the Advanced Fuel Cycle Initiative (AFCI) Research and Development Program. The CETE project under way at ORNL is focused on (1) the demonstration of separations technology that would significantly reduce the quantity of nuclear waste that would require long-term geologic disposal and (2) providing products and waste streams for further treatment and testing to develop suitable forms for recycle or disposal. Equipment for the CETE research and development (R&D) capability has been installed to provide all primary processing operations, ranging from spent fuel receipt to production of products and waste forms. The head-end treatment and off-gas recovery as well as the various solvent extraction processes separate the spent fuel into a number of discrete product streams, each with unique properties. As part of the CETE project demonstrations at ORNL, each of these product streams is recovered to serve as the feed to other critical process and waste management research, development, and demonstration activities. These include the production of recycle MOX fuel, transmutation fuels, recycle cladding, and new waste forms. The paper discusses the separation and recovery processes used in the CETE demo and the resulting products from the first campaign.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗