Engineering Papers⌕ Search

Engineering topics

Clarke, Roy

Publications and source records attributed to Clarke, Roy.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Carrier dynamics of intermediate sub-bandgap transitions in ZnTeO

The incorporation of electronic states in the bandgap, with high radiative efficiency, provides a means for optical up/down conversion and for tuning the carrier lifetime of a material. Such intermediate states in highly mismatched alloys have recently received much attention due to their potential for an efficient solar energy conversion. Understanding the carrier dynamics and pathways for the charge transfer of sub-bandgap transitions is critical for understanding energy conversion processes. In this work, time-resolved photoluminescence of ZnTeO is reported, revealing electron relaxation from the conduction band to the intermediate band and the carrier transfer between intermediate states and the conduction band utilizing two time-delayed optical excitations. Furthermore, this work demonstrates the utility of time-resolved techniques for characterizing energy conversion mechanisms in intermediate band materials, and the ability to use intermediate states to intentionally alter carrier lifetimes in materials for applications such as ultrafast scintillation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Printing of small molecular medicines from the vapor phase

There is growing need to develop efficient methods for early-stage drug discovery, continuous manufacturing of drug delivery vehicles, and ultra-precise dosing of high potency drugs. Here we demonstrate the use of solvent-free organic vapor jet printing to deposit nanostructured films of small molecular pharmaceutical ingredients, including caffeine, paracetamol, ibuprofen, tamoxifen, BAY 11-7082 and fluorescein, with accuracy on the scale of micrograms per square centimeter, onto glass, Tegaderm, Listerine tabs, and stainless steel microneedles. The printed films exhibit similar crystallographic order and chemistry as the original powders; controlled, order-of-magnitude enhancements of dissolution rate are observed relative to powder-form particles. In vitro treatment of breast and ovarian cancer cell cultures in aqueous media by tamoxifen and BAY 11-7082 films shows similar behavior to drugs pre-dissolved in dimethyl sulfoxide. In conclusion, the demonstrated precise printing of medicines as films, without the use of solvents, can accelerate drug screening and enable continuous manufacturing, while enhancing dosage accuracy.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

Tetradymite layer assisted heteroepitaxial growth and applications

A multilayer stack including a substrate, an active layer, and a tetradymite buffer layer positioned between the substrate and the active layer is disclosed. A method for fabricating a multilayer stack including a substrate, a tetradymite buffer layer and an active layer is also disclosed. Use of such stacks may be in photovoltaics, solar cells, light emitting diodes, and night vision arrays, among other applications.

14 SOLAR ENERGY↗
DOE OSTI2017

Growth of ordered and disordered ZnSnN 2

A series of ZnSnN2 films has been grown by plasma assisted molecular beam epitaxy in order to investigate the possibility of controlled cation sublattice disorder as well as its effects on physical and electronic properties of the material. By varying the growth conditions, specifically either the metal to nitrogen flux ratio or the substrate temperature, the authors have confirmed the existence of both the hexagonal and orthorhombic phases of the material via synchrotron x-ray diffraction and in situ reflection high energy electron diffraction measurements. Here, the authors report the results of an initial mapping and analysis of the growth parameter space, as part of continuing efforts to improve material quality.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Oxide Interfaces: emergent structure and dynamics

This Final Report describes the scientific accomplishments that have been achieved with support from grant DE-FG02-06ER46273 during the period 6/1/2012– 5/31/2016. The overall goals of this program were focused on the behavior of epitaxial oxide heterostructures at atomic length scales (Ångstroms), and correspondingly short time-scales (fs -ns). The results contributed fundamentally to one of the currently most active frontiers in condensed matter physics research, namely to better understand the intricate relationship between charge, lattice, orbital and spin degrees of freedom that are exhibited by complex oxide heterostructures. The findings also contributed towards an important technological goal which was to achieve a better basic understanding of structural and electronic correlations so that the unusual properties of complex oxides can be exploited for energy-critical applications. Specific research directions included: probing the microscopic behavior of epitaxial interfaces and buried layers; novel materials structures that emerge from ionic and electronic reconfiguration at epitaxial interfaces; ultrahigh-resolution mapping of the atomic structure of heterointerfaces using synchrotron-based x-ray surface scattering, including direct methods of phase retrieval; using ultrafast lasers to study the effects of transient strain on coherent manipulation of multi-ferroic order parameters; and investigating structural ordering and relaxation processes in real-time.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Stabilization of orthorhombic phase in single-crystal ZnSnN{sub 2} films

We report on the crystal structure of epitaxial ZnSnN{sub 2} films synthesized via plasma-assisted vapor deposition on (111) yttria stabilized zirconia (YSZ) and (001) lithium gallate (LiGaO{sub 2}) substrates. X-ray diffraction measurements performed on ZnSnN{sub 2} films deposited on LiGaO{sub 2} substrates show evidence of single-crystal, phase-pure orthorhombic structure in the Pn2{sub 1}a symmetry [space group (33)], with lattice parameters in good agreement with theoretically predicted values. This Pn2{sub 1}a symmetry is imposed on the ZnSnN{sub 2} films by the LiGaO{sub 2} substrate, which also has orthorhombic symmetry. A structural change from the wurtzite phase to the orthorhombic phase in films grown at high substrate temperatures ∼550°C and low values of nitrogen flux ∼10{sup −5} Torr is observed in ZnSnN{sub 2} films deposited on YSZ characterized by lattice contraction in the basal plane and a 5.7% expansion of the out-of-plane lattice parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Understanding Strain‐Induced Phase Transformations in BiFeO 3 Thin Films

Experiments demonstrate that under large epitaxial strain a coexisting striped phase emerges in BiFeO 3 thin films, which comprises a tetragonal‐like ( T ′) and an intermediate S ′ polymorph. It exhibits a relatively large piezoelectric response when switching between the coexisting phase and a uniform T ′ phase. This strain‐induced phase transformation is investigated through a synergistic combination of first‐principles theory and experiments. The results show that the S ′ phase is energetically very close to the T ′ phase, but is structurally similar to the bulk rhombohedral ( R ) phase. By fully characterizing the intermediate S ′ polymorph, it is demonstrated that the flat energy landscape resulting in the absence of an energy barrier between the T ′ and S ′ phases fosters the above‐mentioned reversible phase transformation. This ability to readily transform between the S ′ and T ′ polymorphs, which have very different octahedral rotation patterns and c / a ratios, is crucial to the enhanced piezoelectricity in strained BiFeO 3 films. Additionally, a blueshift in the band gap when moving from R to S ′ to T ′ is observed. These results emphasize the importance of strain engineering for tuning electromechanical responses or, creating unique energy harvesting photonic structures, in oxide thin film architectures.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Ordered horizontal Sb 2 Te 3 nanowires induced by femtosecond lasers

Nanowires are of intense interest on account of their ability to confine electronic and phononic excitations in narrow channels, leading to unique vibronic and optoelectronic properties. Most systems reported to date exhibit nanowire axes perpendicular to the substrate surface, while for many applications (e.g., photodetectors and sensors), a parallel orientation may be advantageous. Here in this paper, we report the formation of in-plane Sb 2 Te 3 nanowires using femtosecond laser irradiation. High-resolution scanning transmission electron microscopy imaging and element mapping reveal that an interesting laser-driven anion exchange mechanism is responsible for the nanowire formation. This development points the way to the scalable production of a distinct class of nanowire materials with in-plane geometry.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Untilting BiFeO{sub 3}: The influence of substrate boundary conditions in ultra-thin BiFeO{sub 3} on SrTiO{sub 3}

We report on the role of oxygen octahedral tilting in the monoclinic-to-tetragonal phase transition in ultra-thin BiFeO{sub 3} films grown on (001) SrTiO{sub 3} substrates. Reciprocal space maps clearly show the disappearance of the integer-order Bragg peak splitting associated with the monoclinic phase when the film thickness decreases below 20 unit cells. This monoclinic-to-tetragonal transition is accompanied by the evolution of the half-order diffraction peaks, which reflects untilting of the oxygen octahedra around the [110] axis, proving that the octahedral tilting is closely correlated with the transition. This structural change is thickness-dependent, and different from a strain-induced transition in the conventional sense.

36 MATERIALS SCIENCE↗