Engineering Papers⌕ Search

Engineering topics

Chen, Lei

Publications and source records attributed to Chen, Lei.

At least 19 records

Machine learning-based bias-corrected future projections of ozone concentrations from a chemistry-climate model

Reliable projection of future near-surface ozone is crucial for air quality management and health risk assessment. However, potential biases in spatial distribution, magnitude and trends in ozone concentrations simulated by global chemistry-climate models limit their applicability in regional-scale evaluations. In this study, LightGBM, a machine learning (ML) algorithm is applied to correct biases in CESM2-simulated ozone concentrations over China, the United States and Europe and calibrate future ozone projections under two diverse Shared Socioeconomic Pathways (SSP1-2.6 and SSP5-8.5) scenarios from 2020 to 2060. The ML-based correction significantly improves the spatial distribution and reduces the model bias by 40%–60%. It also reverses the potentially incorrect trend of ozone change under SSP1-2.6 in eastern China. When applying ML-based bias correction to CESM2 future projections, warm season mean ozone concentrations decrease across China, the United States, and Europe by –13.5, –17.9, and –13.7 µg/m³, respectively, between 2020 and 2060 in SSP1-2.6, while they increase by 9.4, 2.0, and 5.2 µg/m³ in SSP5-8.5. Decomposition analysis show that changes in anthropogenic emissions dominate future ozone changes in both scenarios, while strong climate penalty from ozone changes occurs in polluted eastern China and climate benefit is found in western China, the United States and Europe under SSP5-8.5. These findings demonstrate the value of combining ML with chemistry-climate models to produce more accurate air quality projections, thereby informing more effective and region-specific environmental protection strategies.

Chemistry Model↗

Ultra-High Efficiency and Stable All-Perovskite Tandem Solar Cells

In the project period, the research team has fabricated more than 6,000 single-junction wide-bandgap (wide-E g ) and low-bandgap (low-E g ) perovskite solar cells (PSCs) and more than 2,000 all-perovskite tandem solar cells (APTSCs). The best-performing wide-E g and low-E g PSCs and APTSCs showed PCEs greater than 19%, 23%, and 30%, respectively. The average PCEs for wide-E g and low-E g PSCs and APTSCs fabricated by the benchmark processes are (18.5 ± 0.4)%, (21.9 ± 0.8)%, and (26.8 ± 2.1)%, respectively. We have demonstrated APTSCs with T 80 lifetime of more than 1,000 h, which were measured by maximum power point tracking (MPPT) under one sun operation in the air. The team has also utilized various advanced characterization techniques to study the optical and electrical properties of wide-E g and low-E g perovskite materials and devices, developing a better understanding of the unique working principle and degradation mechanism of APTSCs. The team has met most GNG decision criteria except for the stability goal of APTSCs under 85 °C/85 RH accelerated lifetime test (ALT). The shortfall of the device ALT stability is mainly limited by the intrinsic instability of Sn-Pb perovskites under illumination at elevated temperatures. The team discussed with stakeholders in the PV academic and industry about these durability concerns and concluded that this is the major technical barrier preventing the market entry of APTSCs. Future fundamental study and R&D work are needed to advance this promising technology.

14 SOLAR ENERGY↗

Persistent flat band splitting and strong selective band renormalization in a kagome magnet thin film

Magnetic kagome materials provide a fascinating playground for exploring the interplay of magnetism, correlation and topology. Many magnetic kagome systems have been reported including the binary Fe m X n (X = Sn, Ge; m:n = 3:1, 3:2, 1:1) family and the rare earth RMn 6 Sn 6 (R = rare earth) family, where their kagome flat bands are calculated to be near the Fermi level in the para magnetic phase. While partially filling a kagome flat band is predicted to give rise to a Stoner-type ferromagnetism, experimental visualization of the mag netic splitting across the ordering temperature has not been reported for any of these systems due to the high ordering temperatures, hence leaving the nature of magnetism in kagome magnets an open question. Here, we probe the electronic structure with angle-resolved photoemission spectroscopy in a kagome magnet thin film FeSn synthesized using molecular beam epitaxy. We identify the exchange-split kagome flat bands, whose splitting persists above the magnetic ordering temperature, indicative of a local moment picture. Such local moments in the presence of the topological flat band are consistent with the compact molecular orbitals predicted in theory. We further observe a large spin-orbital selective band renormalization in the Fe d xy + d x 2 -y 2 spin majority channel reminiscent of the orbital selective correlation effects in the iron based superconductors. Our discovery of the coexistence of local moments with topological flat bands in a kagome system echoes similar findings in magic-angle twisted bilayer graphene, and provides a basis for theoretical effort towards modeling correlation effects in magnetic flat band systems.

36 MATERIALS SCIENCE↗

Diamine chelates for increased stability in mixed Sn–Pb and all-perovskite tandem solar cells

Perovskite tandem solar cells show promising performance but non-radiative recombination and its progressive worsening with time, especially in the mixed Sn–Pb low-bandgap layer, limit performance and stability. Here, in this study, we find that mixed Sn–Pb perovskite thin films exhibit a compositional gradient, with an excess of Sn on the surface – and we show this gradient exacerbates oxidation and increases the recombination rate. We find that diamines preferentially chelate Sn atoms, removing them from the film surface and achieving a more balanced Sn:Pb stoichiometry, making the surface of the film resistive to the oxidation of Sn. The process forms an electrically resistive low-dimensional barrier layer, passivating defects and reducing interface recombination. Further improving the homogeneity of the barrier layer using 1,2-diaminopropane results in more uniform distribution and passivation. Tandems achieve a power conversion efficiency of 28.8%. As a result, encapsulated tandems retain 90% of initial efficiency following 1000 hours of operating at the maximum power point under simulated one-sun illumination in air without cooling.

14 SOLAR ENERGY↗

Emergent flat band and topological Kondo semimetal driven by orbital-selective correlations

Flat electronic bands are expected to show proportionally enhanced electron correlations, which may generate a plethora of novel quantum phases and unusual low-energy excitations. They are increasingly being pursued in d-electron-based systems with crystalline lattices that feature destructive electronic interference, where they are often topological. Such flat bands, though, are generically located far away from the Fermi energy, which limits their capacity to partake in the low-energy physics. Here we show that electron correlations produce emergent flat bands that are pinned to the Fermi energy. We demonstrate this effect within a Hubbard model, in the regime described by Wannier orbitals where an effective Kondo description arises through orbital-selective Mott correlations. Moreover, the correlation effect cooperates with symmetry constraints to produce a topological Kondo semimetal. Our results motivate a novel design principle for Weyl Kondo semimetals in a new setting, viz.d-electron-based materials on suitable crystal lattices, and uncover interconnections among seemingly disparate systems that may inspire fresh understandings and realizations of correlated topological effects in quantum materials and beyond.

74 ATOMIC AND MOLECULAR PHYSICS↗

Suppressed deprotonation enables a durable buried interface in tin-lead perovskite for all-perovskite tandem solar cells

Low-band-gap tin (Sn)-lead (Pb) perovskites are a critical component in all-perovskite tandem solar cells (APTSCs). Current state-of-the-art Sn-Pb perovskite devices exclusively use poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) as the hole-transport layer (HTL) but suffer from undesired buried-interface degradation. Here, we show that the deprotonation of the –SO 3 H group in PSS is the root cause of the interface degradation due to its low acid dissociation constant (pK a ), leading to acidic erosion and iodine volatilization in Sn-Pb perovskites. We identify that HTL featuring the carboxyl (–COOH) group with a higher pK a , such as poly[3-(4-carboxybutyl)thiophene-2,5-diyl] (P3CT), can suppress deprotonation and strengthen the interface, mitigating the buried-interface degradation. Motivated by established P3CT modification, we introduce Pb doping to P3CT to increase its work function and reduce interfacial energy loss. Furthermore, we fabricate APTSCs with a champion efficiency of 27.8% and an operational lifetime of over 1,000 h, with 97% retaining efficiency under maximum power point tracking.

08 HYDROGEN↗

Reversible non-volatile electronic switching in a near-room-temperature van der Waals ferromagnet

Abstract Non-volatile phase-change memory devices utilize local heating to toggle between crystalline and amorphous states with distinct electrical properties. Expanding on this kind of switching to two topologically distinct phases requires controlled non-volatile switching between two crystalline phases with distinct symmetries. Here, we report the observation of reversible and non-volatile switching between two stable and closely related crystal structures, with remarkably distinct electronic structures, in the near-room-temperature van der Waals ferromagnet Fe 5− δ GeTe 2 . We show that the switching is enabled by the ordering and disordering of Fe site vacancies that results in distinct crystalline symmetries of the two phases, which can be controlled by a thermal annealing and quenching method. The two phases are distinguished by the presence of topological nodal lines due to the preserved global inversion symmetry in the site-disordered phase, flat bands resulting from quantum destructive interference on a bipartite lattice, and broken inversion symmetry in the site-ordered phase.

36 MATERIALS SCIENCE↗

Kondo effect and its destruction in heterobilayer transition metal dichalcogenides

Moiré structures, along with line-graph-based d -electron systems, represent a setting to realize flat bands. One form of the associated strong correlation physics is the Kondo effect. Here, we address the recently observed Kondo-driven heavy fermion state and its destruction in AB-stacked hetero-bilayer transition metal dichalcogenides, which can be controlled by the gate voltages. By studying an effective interacting Hamiltonian using the slave spin approach, we obtained a phase diagram with the total filling factor and the displacement field strength as the tunable parameters. In an extended range of the tunable displacement field, our numerical results show that the relative filling of the d orbital, which is associated with the highest moiré band from the MoTe 2 layer, is enforced to be ν d ≈ 1 by the interaction. This agrees with the experimental observation. We also argue that the observed high coherence temperature scale could be explained by the non-negligible bandwidth of the d orbital. Our results set the stage to address the amplified quantum fluctuations that the Kondo effect may produce in these structures and new regimes that the systems open up for Kondo-destruction quantum criticality. Published by the American Physical Society 2024

Xie, Fang (ORCID:000000021327767X)↗

Non-Fermi liquid behaviour in a correlated flat-band pyrochlore lattice

Electronic correlation effects are manifested in quantum materials when either the on-site Coulomb repulsion is large or the electron kinetic energy is small. The former is the dominant effect in cuprate superconductors and heavy-fermion systems whereas it is the latter in twisted bilayer graphene and geometrically frustrated metals. However, the simultaneous cooperation of both effects in the same quantum material remains rare. The design aim is to produce correlated topological flat bands pinned at the Fermi level. Here, we observe a flat band at the Fermi level in a 3d pyrochlore metal CuV 2 S 4 . Our angle-resolved photoemission spectroscopy data reveal that destructive quantum interference associated with the V pyrochlore sublattice and further renormalization to the Fermi level by electron interactions induce this flat band. Consequently, we discover transport signatures that evidence a deviation from Fermi liquid behaviour as well as an enhanced Sommerfeld coefficient. Our work illustrates the combined cooperation of local Coulomb interactions and geometric frustration in a pyrochlore lattice system to induce correlated topology by constructing and pinning correlated flat bands near the Fermi level.

36 MATERIALS SCIENCE↗

On the Durability of Tin‐Containing Perovskite Solar Cells

Abstract Tin (Sn)‐containing perovskite solar cells (PSCs) have gained significant attention in the field of perovskite optoelectronics due to lower toxicity than their lead‐based counterparts and their potential for tandem applications. However, the lack of stability is a major concern that hampers their development. To achieve the long‐term stability of Sn‐containing PSCs, it is crucial to have a clear and comprehensive understanding of the degradation mechanisms of Sn‐containing perovskites and develop mitigation strategies. This review provides a compendious overview of degradation pathways observed in Sn‐containing perovskites, attributing to intrinsic factors related to the materials themselves and environmental factors such as light, heat, moisture, oxygen, and their combined effects. The impact of interface and electrode materials on the stability of Sn‐containing PSCs is also discussed. Additionally, various strategies to mitigate the instability issue of Sn‐containing PSCs are summarized. Lastly, the challenges and prospects for achieving durable Sn‐containing PSCs are presented.

14 SOLAR ENERGY↗

Tailoring Crystallization Dynamics of CsPbI 3 for Scalable Production of Efficient Inorganic Perovskite Solar Cells

All-inorganic perovskite cesium lead triiodide (CsPbI 3 ) with inorganic nature, low-temperature synthesis, and a suitable bandgap is desirable for high-performance photovoltaics. However, the scalable production of CsPbI 3 photovoltaics is still challenging due to a large nucleation energy barrier and slow phase transition during unassisted natural crystallization. Here, the crystallization dynamics of CsPbI 3 thin films is tailored via lead acetate (PbAc 2 ) substitution in the perovskite precursor ink, allowing the scalable fabrication of efficient all-inorganic perovskite solar cells and minimodules. Introducing PbAc 2 enlarges CsPbI 3 colloid size in the precursor and reduces the nucleation energy barrier. Additionally, reactions between acetate and dimethylammonium in the wet film accelerate the removal of dimethylammonium additives and generate solvent vapors for self-regulate internal solvent annealing, resulting in densely packed, uniform, and pinhole-free CsPbI 3 perovskite films over large areas. This strategy demonstrates inverted CsPbI 3 solar cells with 20.17% efficiency and good operational stability (retaining 95.5% of initial efficiency after continuous operation for 1800 h) and 15.1%-efficient CsPbI 3 minimodules with an active area of 26.8 cm 2 .

36 MATERIALS SCIENCE↗

Seed‐Assisted Growth for Scalable and Efficient Perovskite Solar Modules

Perovskite solar modules (PSMs) have shown remarkable photovoltaic potentials, but they still suffer from large power conversion efficiency (PCE) loss on scale‐up and instability due to inferior uniformity and crystallization over large areas. Herein, the scalable production of efficient and stable PSMs using a suite of all‐scalable fabrication methods featuring a two‐step blade/dip‐coating approach to deposit the perovskite absorber layer is demonstrated. Rubidium chloride is introduced to embed (PbI 2 ) 2 RbCl complex seeds in the first‐deposited PbI 2 precursor, which assists in uniform crystallization of the perovskite layer with high crystallinity and reduced defect density over large areas. Following the optimization of RbCl additives, a champion PSM with 17.9% PCE on a 7.6 × 7.6 cm 2 substrate with a 37 cm 2 aperture area is achieved. Moreover, the RbCl‐incorporated PSMs demonstrate excellent reproducibility and stability under continuous 1 sun illumination. This work shows that the two‐step blade/dip coating is a promising method for producing high‐efficiency and stable PSMs on an industrially relevant scale.

Energy & Fuels↗

Incorporating Potassium Citrate to Improve the Performance of Tin‐Lead Perovskite Solar Cells

Abstract Easy‐to‐form tin vacancies at the buried interface of tin‐lead perovskites hinder the performance of low‐bandgap perovskite solar cells (PSCs). Here, a synergistic strategy by incorporating potassium citrate (PC) into the poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hole‐transport layer to passivate the buried interface of Sn‐Pb PSCs is reported. PC neutralizes the acidity of PEDOT:PSS and stabilizes the perovskite front surface, enhancing device stability. Citrate moieties coordinate with Sn 2+ on the buried perovskite surface, preventing Sn 2+ oxidation and suppressing defect formation. Additionally, potassium cations incorporate into Sn‐Pb perovskites, enhancing crystallinity and passivating halide defects. The combined benefits enable efficient low‐bandgap Sn‐Pb PSCs with a power conversion efficiency of 22.7% and a high open‐circuit voltage of 0.894 V. Using this method, 26.1% efficiency for all‐perovskite tandem solar cells is demonstrated. These results emphasize the significance of buried interface passivation in developing efficient and stable Sn‐Pb PSCs and all‐perovskite tandem solar cells.

14 SOLAR ENERGY↗