Engineering Papers⌕ Search

Engineering topics

Chen, Gang

Publications and source records attributed to Chen, Gang.

At least 325 records · Page 18

Thermoelectric properties of copper selenide with ordered selenium layer and disordered copper layer

Thermoelectric figure-of-merit (ZT) of ~1.6 at 700 °C is achieved in β-phase copper selenide (Cu 2 Se) made by ball milling and hot pressing. The β-phase of such material possesses a natural superlattice-like structure that combines ordered selenium (Se) and disordered copper (Cu) layers in its unit cell, resulting in a low lattice thermal conductivity of 0.4–0.5 W m -1 K -1 . A λ-shaped specific heat peak indicates a phase transition from cubic β-phase to tetragonal α-phase at around 140 °C upon cooling and vice versa. An abnormal decrease in specific heat with increasing temperature was also observed here due to the increased random motion of disordered Cu atoms. These features indicate that β-phase Cu 2 Se could be potentially an interesting thermoelectric material, competing with other conventional thermoelectric materials.

36 MATERIALS SCIENCE↗

Modeling and optimization of solar thermoelectric generators for terrestrial applications

We introduce a model and an optimization methodology for terrestrial solar thermoelectric generators (STEGs). We describe, discuss, and justify the necessary constraints on the STEG geometry that make the STEG optimization independent of individual dimensions. A simplified model shows that the thermoelectric elements in STEGs can be scaled in size without affecting the overall performance of the device, even when the properties of the thermoelectric material and the solar absorber are temperature-dependent. Consequently, the amount of thermoelectric material can be minimized to be only a negligible fraction of the total system cost. As an example, a Bi 2 Te 3 -based STEG is optimized for rooftop power generation. Peak efficiency is predicted to be 5% at the standard spectrum AM1.5G, with the thermoelectric material cost below 0.05 $/W p . Integrating STEGs into solar hot water systems for cogeneration adds electricity at minimal extra cost. In such cogeneration systems the electric current can be adjusted throughout the day to favor either electricity or hot water production.

14 SOLAR ENERGY↗

Optimal Bandwidth for High Efficiency Thermoelectrics

The thermoelectric figure of merit (ZT) in narrow conduction bands of different material dimensionalities is investigated for different carrier scattering models. When the bandwidth is zero, the transport distribution function (TDF) is finite, not infinite as previously speculated by Mahan and Sofo [Proc. Natl. Acad. Sci. U.S.A. 93, 7436 (1996)], even though the carrier density of states goes to infinity. Such a finite TDF results in a zero electrical conductivity and thus a zero ZT. We point out that the optimal ZT cannot be found in an extremely narrow conduction band. The existence of an optimal bandwidth for a maximal ZT depends strongly on the scattering models and the dimensionality of the material. A nonzero optimal bandwidth for maximizing ZT also depends on the lattice thermal conductivity. A larger maximum ZT can be obtained for materials with a smaller lattice thermal conductivity.

36 MATERIALS SCIENCE↗

Suppression of grain growth by additive in nanostructured p-type bismuth antimony tellurides

Grain growth is a major issue in the preparation of nanostructured bismuth-antimony-tellurides during hot pressing the nanopowders into dense bulk samples. To prevent grain agglomeration during ball milling and growth during hot pressing, organic agent (Oleic Acid, OA) as additive was added here into the materials at the beginning of the ball milling process. With different concentrations of OA (0.5, 1.0, 1.5, 2.0, and 2.5 wt%), grains with different sizes are obtained. Structural analysis clearly shows that it is the particle size of the nanopowders that determines the final grain size in the densely compacted bulk samples. A combination of small grains ~200–500 nm and nanopores leads to effective phonon scattering, which results in the decrease of lattice thermal conductivity, and ZT of ~1.3 at 373 K for the sample with 2.0 wt% OA.

36 MATERIALS SCIENCE↗

Enhancement of thermoelectric figure-of-merit by resonant states of aluminium doping in lead selenide

In this study, by adding aluminium (Al) into lead selenide (PbSe), we successfully prepared n-type PbSe thermoelectric materials with a figure-of-merit (ZT) of 1.3 at 850 K. Such a high ZT is achieved by a combination of high Seebeck coefficient caused by very possibly the resonant states in the conduction band created by Al dopant and low thermal conductivity from nanosized phonon scattering centers.

36 MATERIALS SCIENCE↗

Recent advances in thermoelectric nanocomposites

Thermoelectric power generation represents a class of energy conversion technology, which has been used in power supply of aeronautic and astronautic exploring missions, now showing notable advantages to harvest the widely distributed waste heat and convert the abundant solar energy into electricity at lower cost than Si-based photovoltaic technology. Thermoelectric dimensionless figure of merit (ZT) plays a key role in the conversion efficiency from thermal to electrical energy. Most state-of-the-art thermoelectric materials are characterized with various nanostructures from fine grains, dispersed particles, nano-inclusions to atomic defects, and therefore are referenced as nanocomposite. Recently, remarkable advances have been achieved in various material systems through the introduction of different nanostructures to tune the transport of phonons and electrons. In this review, we firstly clarify some fundamental tradeoffs dictating the ZT value through the relationship ZT=(S 2 σ/κ)T. We also pay special attentions to the recent advances in some selected materials, including half-Heuslers, PbTe, CoSb 3 , Bi 2 Te 3 , etc. We provide an outlook of new directions in this filed, especially a proposal on a new concept of ordered nanocomposite.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modeling of concentrating solar thermoelectric generators

The conversion of solar power into electricity is dominated by non-concentrating photovoltaics and concentrating solar thermal systems. Recently, it has been shown that solar thermoelectric generators (STEGs) are a viable alternative in the non-concentrating regime. This paper addresses here the possibility of STEGs being used as the power block in concentrating solar power systems. STEG power blocks have no moving parts, they are scalable, and they eliminate the need for an external traditional thermomechanical generator, such as a steam turbine or Stirling engine. Using existing skutterudite and bismuth telluride materials, concentrating STEGs can have efficiencies exceeding 10% based on a geometric optical concentration ratio of 45.

14 SOLAR ENERGY↗

Thermal conductivity of half-Heusler compounds from first-principles calculations

We demonstrate successful application of first-principles-based thermal conductivity calculation on half-Heusler compounds that are promising, environmentally friendly thermoelectric materials. Taking the case of a p -type half-Heusler structure, the harmonic and anharmonic interatomic force constants were obtained from a set of force-displacement data calculated by the density functional theory. Thermal conductivity was obtained by two different methods: (1) Boltzmann-Peierls formula with phonon relaxation times calculated by either Fermi's golden rule of three-phonon scattering processes or spectral analysis of molecular dynamics phase space trajectories and (2) Green-Kubo formula for heat current obtained by equilibrium molecular dynamics simulations. The calculated temperature dependence of thermal conductivity is in reasonable agreement with experiments. The method was extended to alloy crystals assuming the transferability of interatomic force constants. By having access to accurate phonon-dependent transport properties, the contribution from an arbitral subset of phonon modes can be quantified. Furthermore, this helps understanding the influence of nanostructures on thermal conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heat transport in silicon from first-principles calculations

Using harmonic and anharmonic force constants extracted from density functional calculations within a supercell, we have developed a relatively simple but general method to compute thermodynamic and thermal properties of any crystal. First, from the harmonic, cubic, and quartic force constants, we construct a force field for molecular dynamics. It is exact in the limit of small atomic displacements and thus does not suffer from inaccuracies inherent in semiempirical potentials such as Stillinger-Weber's. By using the Green-Kubo formula and molecular dynamics simulations, we extract the bulk thermal conductivity. This method is accurate at high temperatures where three-phonon processes need to be included to higher orders, but may suffer from size scaling issues. Next, we use perturbation theory (Fermi golden rule) to extract the phonon lifetimes and compute the thermal conductivity κ from the relaxation-time approximation. This method is valid at most temperatures, but will overestimate κ at very high temperatures, where higher-order processes neglected in our calculations also contribute. As a test, these methods are applied to bulk crystalline silicon, and the results are compared and differences are discussed in more detail. The presented methodology paves the way for a systematic approach to model heat transport in solids using multiscale modeling, in which the relaxation time due to anharmonic three-phonon processes is calculated quantitatively, in addition to the usual harmonic properties such as phonon frequencies and group velocities. As a result it also allows the construction of an accurate bulk interatomic potentials database.

36 MATERIALS SCIENCE↗

On the importance of optical phonons to thermal conductivity in nanostructures

The contribution of optical phonons to thermal conductivity has typically been ignored. However, when the system size decreases to the nanoscale regime, optical phonons are no longer negligible. The contributions of different phonon polarizations to the thermal conductivity of silicon are discussed based on the phonon lifetimes extracted from a first principles approach. The results indicate that around room temperature, optical phonons can contribute over 20% to the thermal conductivity of nanostructures as compared to 5% in bulk materials. In addition, the temperature and size dependence of the contributions from acoustic and optical phonons are fully explored.

42 ENGINEERING↗