Engineering Papers⌕ Search

Engineering topics

Chen, Chen

Publications and source records attributed to Chen, Chen.

At least 127 records · Page 7

Demand Response and Smart Buildings: A Survey of Control, Communication, and Cyber-Physical Security

In this paper, we perform a comprehensive survey of the technical aspects related to the implementation of demand response and smart buildings. Specifically, we discuss various smart loads such as heating, ventilating, and air-conditioning (HVAC) systems and plug-in electric vehicles (PEVs); the power architecture with multibus characteristics; different control algorithms such as the hybrid centralized and decentralized control and the distributed coordination among buildings; the communication technologies and network architectures; and the potential cyber-physical security issues and possible mechanisms for enhancing the system security at both cyber and physical layers. Finally, the current status of the demand response in United States, Europe, Japan, and China is reviewed, and the benefits, costs, and challenges of implementing and operating demand response and smart buildings are also discussed.

42 ENGINEERING↗

Short-channel field-effect transistors with 9-atom and 13-atom wide graphene nanoribbons

Bottom-up synthesized graphene nanoribbons and graphene nanoribbon heterostructures have promising electronic properties for high-performance field-effect transistors and ultra-low power devices such as tunneling field-effect transistors. However, the short length and wide band gap of these graphene nanoribbons have prevented the fabrication of devices with the desired performance and switching behavior. Here, by fabricating short channel (L ch ~ 20 nm) devices with a thin, high-κ gate dielectric and a 9-atom wide (0.95 nm) armchair graphene nanoribbon as the channel material, we demonstrate field-effect transistors with high on-current (I on > 1 μA at V d = -1 V) and high I on /I off ~ 10 5 at room temperature. We find that the performance of these devices is limited by tunneling through the Schottky barrier at the contacts and we observe an increase in the transparency of the barrier by increasing the gate field near the contacts. Our results thus demonstrate successful fabrication of high-performance short-channel field-effect transistors with bottom-up synthesized armchair graphene nanoribbons.

36 MATERIALS SCIENCE↗

Predicting hidden bulk phases from surface phases in bilayered Sr 3 Ru 2 O 7

The ability to predict hidden phases under extreme conditions is not only crucial to understanding and manipulating materials but it could also lead to insight into new phenomena and novel routes to synthesize new phases. This is especially true for Ruddlesden-Popper perovskite phases that possess interesting properties ranging from superconductivity and colossal magnetoresistance to photovoltaic and catalytic activities. In particular, the physical properties of the bilayer perovskite Sr 3 Ru 2 O 7 at the surface are intimately tied to the rotation and tilt of the RuO 6 octahedra. In order to take advantage of the extra degree of freedom associated with tilting we have performed first principles hybrid density functional simulations of uniaxial pressure applied along the c-axis of bulk Sr 3 Ru 2 O 7 where we find that the octahedra become tilted, leading to two phase transitions. One is a structural transition at ~1.5 GPa, and the other is from a ferromagnetic (FM) metal to an antiferromagnetic (AFM) insulator at ~21 GPa whose AFM spin configuration is different from the AFM state near the FM ground state.

36 MATERIALS SCIENCE↗

Facile fabrication of micro-floriated AgBr/Bi{sub 2}O{sub 3} as highly efficient visible-light photocatalyst

Highlights: • We successfully fabricate micro-floriated AgBr/Bi{sub 2}O{sub 3} composites by one simple hydrothermal react with precusor BiOBr. This micro-floriated Bi{sub 2}O{sub 3} heterojunction composite is rarely reported by others. • Heterojunction AgBr/Bi{sub 2}O{sub 3} composite exhibits highly efficient photocatalytic activity to decompose pollutant. • The enhanced photocatalytic activity was attributed to the improved visible light harvesting ability and higher separation efficiency of photogenerated electron–hole pairs by the introduction of AgBr. • This composite is beneficial to industrial applications to eliminate the organic pollutants from waste water. - Abstract: Semiconductor with photocatalytic property is the potential solution to solve the problem about water pollution. Novel floriated AgBr/Bi{sub 2}O{sub 3} fabricated through a facile simple two-step hydrothermal method is an efficient photocatalyst. The eminent performance for degradation of methyl orange (MO) was evaluated under visible light irradiation. Many characterization methods, including XPS, XRD, FT-IR, SEM, TEM and UV–vis diffuse reflection spectroscopy, were used to investigate the structure, elemental composition, morphology and catalytic activity. Broad contact between AgBr and Bi{sub 2}O{sub 3} interface enabled hybrid materials possess superior efficiency for the decomposition of MO under visible light irradiation. The optimum photocatalytic activity of samples was approximately 11.7 times higher than pure Bi{sub 2}O{sub 3}. In addition, the photo-generated reactive species were identified based on free radicals trapping experiments, which revealed that superoxide radical is the key factor to the photocatalytic process.

36 MATERIALS SCIENCE↗

Development of reactive force fields using ab initio molecular dynamics simulation minimally biased to experimental data

Incorporation of quantum mechanical electronic structure data is necessary to properly capture the physics of many chemical processes. Proton hopping in water, which involves rearrangement of chemical and hydrogen bonds, is one such example of an inherently quantum mechanical process. Standard ab initio molecular dynamics (AIMD) methods, however, do not yet accurately predict the structure of water and are therefore less than optimal for developing force fields. We have instead utilized here a recently developed method which minimally biases AIMD simulations to match limited experimental data to develop novel multiscale reactive molecular dynamics (MS-RMD) force fields by using relative entropy minimization. In this paper, we present two new MS-RMD models using such a parameterization: one which employs water with harmonic internal vibrations and another which uses anharmonic water. We show that the newly developed MS-RMD models very closely reproduce the solvation structure of the hydrated excess proton in the target AIMD data. We also find that the use of anharmonic water increases proton hopping, thereby increasing the proton diffusion constant.

74 ATOMIC AND MOLECULAR PHYSICS↗

Parity partners in the baryon resonance spectrum

Here, we describe a calculation of the spectrum of flavor-SU(3) octet and decuplet baryons, their parity partners, and the radial excitations of these systems, made using a symmetry-preserving treatment of a vector x vector contact interaction as the foundation for the relevant few-body equations. Dynamical chiral symmetry breaking generates nonpointlike diquarks within these baryons and hence, using the contact interaction, flavor-antitriplet scalar, pseudoscalar, vector, and flavor-sextet axial-vector quark-quark correlations can all play active roles. The model yields reasonable masses for all systems studied and Faddeev amplitudes for ground states and associated parity partners that sketch a realistic picture of their internal structure: ground-state, even-parity baryons are constituted, almost exclusively, from like-parity diquark correlations, but orbital angular momentum plays an important role in the rest-frame wave functions of odd-parity baryons, whose Faddeev amplitudes are dominated by odd-parity diquarks.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modernizing Distribution System Restoration to Achieve Grid Resiliency Against Extreme Weather Events: An Integrated Solution

Recent severe power outages caused by extreme weather hazards have highlighted the importance and urgency of improving the resilience of the electric power grid. As the distribution grids still remain vulnerable to natural disasters, the power industry has focused on methods of restoring distribution systems after disasters in an effective and quick manner. The current distribution system restoration practice for utilities is mainly based on predetermined priorities and tends to be inefficient and suboptimal, and the lack of situational awareness after the hazard significantly delays the restoration process. As a result, customers may experience an extended blackout, which causes large economic loss. On the other hand, the emerging advanced devices and technologies enabled through grid modernization efforts have the potential to improve the distribution system restoration strategy. However, utilizing these resources to aid the utilities in better distribution system restoration decision-making in response to extreme weather events is a challenging task. Therefore, this paper proposes an integrated solution: a distribution system restoration decision support tool designed by leveraging resources developed for grid modernization. We first review the current distribution restoration practice and discuss why it is inadequate in response to extreme weather events. Then we describe how the grid modernization efforts could benefit distribution system restoration, and we propose an integrated solution in the form of a decision support tool to achieve the goal. The advantages of the solution include improving situational awareness of the system damage status and facilitating survivability for customers. The paper provides a comprehensive review of how the existing methodologies in the literature could be leveraged to achieve the key advantages. The benefits of the developed system restoration decision support tool include the optimal and efficient allocation of repair crews and resources, the expediting of the restoration process, and the reduction of outage durations for customers, in response to severe blackouts due to extreme weather hazards.

Automated feeder switch↗

Sequential Service Restoration for Unbalanced Distribution Systems and Microgrids

The resilience and reliability of modern power systems are threatened by increasingly severe weather events and cyber-physical security events. An effective restoration methodology is desired to optimally integrate emerging smart grid technologies and pave the way for developing self-healing smart grids. In this paper, a sequential service restoration (SSR) framework is proposed to generate restoration solutions for distribution systems and microgrids in the event of large-scale power outages. The restoration solution contains a sequence of control actions that properly coordinate switches, distributed generators, and switchable loads to form multiple isolated microgrids. The SSR can be applied for three-phase unbalanced distribution systems and microgrids and can adapt to various operation conditions. Mathematical models are introduced for three-phase unbalanced power flow, voltage regulators, transformers, and loads. Furthermore, the SSR problem is formulated as a mixed-integer linear programming model, and its effectiveness is evaluated via the modified IEEE 123 node test feeder.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Multi-Time Step Service Restoration for Advanced Distribution Systems and Microgrids

Modern power systems are facing increased risk of disasters that can cause extended outages. The presence of remote control switches (RCSs), distributed generators (DGs), and energy storage systems (ESS) provides both challenges and opportunities for developing post-fault service restoration methodologies. Inter-temporal constraints of DGs, ESS, and loads under cold load pickup (CLPU) conditions impose extra complexity on problem formulation and solution. In this paper, a multi-time step service restoration methodology is proposed to optimally generate a sequence of control actions for controllable switches, ESSs, and dispatchable DGs to assist the system operator with decision making. The restoration sequence is determined to minimize the unserved customers by energizing the system step by step without violating operational constraints at each time step. The proposed methodology is formulated as a mixed-integer linear programming (MILP) model and can adapt to various operation conditions. Furthermore, the proposed method is validated through several case studies that are performed on modified IEEE 13-node and IEEE 123-node test feeders.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Building metallic glass structures on crystalline metal substrates by laser-foil-printing additive manufacturing

In laser-foil-printing additive manufacturing, 3D metallic glass structures can be built by laser welding of amorphous foils, layer by layer, upon a crystalline metal substrate. Here, in this paper, weldability studies for laser welding of Zr 52.5 Ti 5 Al 10 Ni 14.6 Cu 17.9 amorphous foils onto a Ti-6Al-4V (Ti 6-4) or Zr 702 substrate are conducted. After laser welding, the weldments are analyzed using X-ray diffractometer, optical microscope, scanning electron microscope equipped with energy dispersive spectroscopy and micro-hardness tester. The results show that Zr 702 is a suitable substrate for Zr-based metallic glass structure since crack-free weld joints can be obtained owing to the formation of ductile α-Zr, while Ti 6-4 is not an appropriate substrate since it has high cracking susceptibility due to the formation of a large amount of hard and brittle intermetallics near the foil-substrate interface. It was found that the mixing between melted substrate and foil is not uniform but exhibits a distinct “swirl” pattern. The swirl structure is more pronounced in Ti 6-4 than in Zr 702 substrate which may contribute to its high cracking susceptibility. The aforementioned mixing leads to partial crystallization of the first amorphous layer; however, fully amorphous is achieved in the additional welding layers.

36 MATERIALS SCIENCE↗

Tandem Catalysis for CO 2 Hydrogenation to C 2 –C 4 Hydrocarbons

Conversion of carbon dioxide to C 2 -C 4 hydrocarbons is a major pursuit in clean energy research. Despite tremendous efforts, the lack of well-defined catalysts in which the spatial arrangement of interfaces is precisely controlled hinders the development of more efficient catalysts and in-depth understanding of reaction mechanisms. Herein, we utilized the strategy of tandem catalysis to develop a well-defined nanostructured catalyst CeO 2 -Pt@mSiO2-Co for converting CO 2 to C 2 -C 4 hydrocarbons using two metal-oxide interfaces. C 2 -C 4 hydrocarbons are found to be produced with high (60%) selectivity, which is speculated to be the result of the two-step tandem process uniquely allowed by this catalyst. Namely, the Pt/CeO 2 interface converts CO 2 and H 2 to CO, and on the neighboring Co/mSiO 2 interface yields C 2 -C 4 hydrocarbons through a subsequent Fischer-Tropsch process. In addition, the catalysts show no obvious deactivation over 40 h. The successful production of C 2 -C 4 hydrocarbons via a tandem process on a rationally designed, structurally well-defined catalyst demonstrates the power of sophisticated structure control in designing nanostructured catalysts for multiple-step chemical conversions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactive molecular dynamics models from ab initio molecular dynamics data using relative entropy minimization

Here, we present two new multiscale molecular dynamics (MS-RMD) models for the hydrated excess proton in water developed directly from ab initio molecular dynamics (AIMD) simulation data of the same system. The potential of mean force along the proton transfer reaction coordinate and radial distribution functions for the MS-RMD models are shown faithfully reproduce those of AIMD. The models are developed using an algorithm based on relative entropy minimization, thus demonstrating the ability of the method to rapidly generate accurate and highly efficient reactive MD force fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selenomethionine promoted hippocampal neurogenesis via the PI3K-Akt-GSK3β-Wnt pathway in a mouse model of Alzheimer's disease

The maintenance of neural system integrity and function is the ultimate goal for the treatment of neurodegenerative disease such as Alzheimer's disease (AD). Neurogenesis plays an integral role in the maintenance of neural and cognitive functions, and its dysfunction is regarded as a major cause of cognitive impairment in AD. Moreover, the induction of neurogenesis by targeting endogenous neural stem cells (NSCs) is considered as one of the most promising treatment strategies. Our previous studies demonstrated that selenomethionine (Se-Met) was able to reduce β-amyloid peptide (Aβ) deposition, decrease Tau protein hyperphosphorylation and markedly improve cognitive functions in triple transgenic (3xTg) AD mice. In this study, we reported that the therapeutic effect of Se-Met on AD could also be due to neurogenesis modulation. By using the cultured hippocampal NSCs from 3xTg AD mice, we discovered that Se-Met (1–10 μM) with low concentration could promote NSC proliferation, while the one with a high concentration (50,100 μM) inhibiting proliferation. In subsequent studies, we also found that Se-Met activated the signaling pathway of PI3K/Akt, and thereby inhibited the GSK3β activity, which would further activated the β-catenin/Cyclin-D signaling pathway and promote NSC proliferation. Besides, after the induction of Se-Met, the number of neurons differentiated from NSCs significantly increased, and the number of astrocytes decreased. After a 90-day treatment with Se-Met (6 μg/mL), the number of hippocampal neurons in 4-month-old AD mice increased significantly, while the one of astrocyte saw a sharp drop. Thus, Se-Met treatment promoted NSCs differentiation into neurons, and subsequently repaired damaged neural systems in AD mice. Being consistent with our in vitro studies, Se-Met acts through the PI3K-Akt- GSK3β-Wnt signaling pathway in vivo. This study provides an unparalleled evidence that selenium (Se) compounds are, to some extent, effective in promoting neurogenesis, and therefore we propose a novel mechanism for Se-Met treatment in AD. - Highlights: • It's the first time to evidence that a selenium (Se) compounds is effective in promoting neurogenesis. • Selenomethionine promotes neural stem cell proliferation and differentiation into neurons. • Selenomethionine activates the PI3K-Akt-GSK3β signaling pathway. • Selenomethionine activates the Wnt signaling pathway.

60 APPLIED LIFE SCIENCES↗

Surface phases of the transition-metal dichalcogenide IrTe 2

Transition-metal dichalcogenide IrTe 2 has attracted attention because of its striped lattice, charge ordering, and superconductivity. We have investigated the surface structure of IrTe 2 , using low-energy electron diffraction and scanning tunneling microscopy. A complex striped lattice modulation as a function of temperature is observed, which shows hysteresis between cooling and warming. While the bulk 5 × 1 and 8 × 1 phases appear at high temperatures, the surface ground state has the 6 × 1 phase, not seen in the bulk, and the surface transition temperatures are distinct from the bulk. Here, the broken symmetry at the surface creates a quite different phase diagram, with the coexistence of several periodicities resembling devil's staircase behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

3D printing of large, complex metallic glass structures

Metallic glasses (MGs) or amorphous alloys although have superior mechanical properties their products are limited to simple geometries such as foils/plates or rods with thin section-thickness due to the requirement of high cooling rates. In this study, 3D, large dimensions of amorphous structures with complex geometry are manufactured by our newly developed Laser Foil Printing (LFP) technology. Zr-based (LM105, provided by Liquidmetal Technologies, Inc.) amorphous foils of 100 μm thickness are used as feedstock, and they are laser welded, layer-by-layer, to become 3D amorphous structures. Test results by X-Ray diffraction (XRD), differential scanning calorimetry (DSC), and micro-hardness confirm that the printed structures at selected process parameters achieve the same or better degree of amorphization as the raw foils. A mathematical model was developed to calculate the heating and cooling rates during structure manufacturing which helps the selection of process parameters. Here this study expands MG products to 3D arbitrary geometries with large dimensions due to the inherited advantages of the LFP technology which would open many potential applications.

36 MATERIALS SCIENCE↗

A Three-Phase Microgrid Restoration Model Considering Unbalanced Operation of Distributed Generation

Recent severe outages highlight the urgency of improving grid resiliency in the U.S. Microgrid formation schemes are proposed to restore critical loads after outages occur. Most distribution networks have unbalanced configurations that are not represented in sufficient detail by single-phase models. This study provides a microgrid formation plan that adopts a three-phase network model to represent unbalanced distribution networks. The problem formulation has a quadratic objective function with mixed-integer linear constraints. The three-phase network model enables us to examine the three-phase power outputs of distributed generators (DGs), preventing unbalanced operation that might trip DGs. Because the DG unbalanced operation constraint is non-convex, an iterative process is presented that checks whether the unbalanced operation limits for DGs are satisfied after each iteration of optimization. We also develop a relatively conservative linear approximation on the unbalanced operation constraint to handle larger networks. Compared with the iterative solution process, the conservative linear approximation is able to accelerate the solution process at the cost of sacrificing optimality to a limited extent. Simulation in the IEEE 34 node and IEEE 123 test feeders indicate that the proposed method yields more practical microgrid formations results. In addition, this paper explores the coordinated operation of DGs and energy storage (ES) installations. The unbalanced three-phase outputs of ESs combined with the relatively balanced outputs of DGs could supply unbalanced loads. In conclusion, the case study also validates the DG-ES coordination.

24 POWER TRANSMISSION AND DISTRIBUTION↗