Engineering Papers⌕ Search

Engineering topics

Chen, Chen

Publications and source records attributed to Chen, Chen.

At least 109 records · Page 6

Combining Simulation and Emulation Systems for Smart Grid Planning and Evaluation

Software-defined networking (SDN) enables efficient network management. As the technology matures, utilities are looking to integrate those benefits to their operations technology (OT) networks. To help the community to better understand and evaluate the effects of such integration, we develop DSSnet, a testing platform that combines a power distribution system simulator and an SDN-based network emulator for smart grid planning and evaluation. DSSnet relies on a container-based virtual time system to achieve efficient synchronization between the simulation and emulation systems. To enhance the system scalability and usability, we extend DSSnet to support a distributed controller environment. To enhance system fidelity, we extend the virtual time system to support kernel-based switches. In conclusion, we also evaluate the system performance of DSSnet and demonstrate the usability of DSSnet with a resilient demand response application case study.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Preparation and up-conversion luminescence of Tb3+/Yb3+ co-doped BaO-WO3-SiO2 glass ceramic

Highlights: • The Tb{sup 3+}/Yb{sup 3+} co-doped glass ceramics containing BaWO{sub 4} is prepared. • The optimum heat treatment schedules is obtained. • The up conversion luminescence mechanism is investigated. - Abstract: The Tb{sup 3+}/Yb{sup 3+} co-doped BaO-WO{sub 3}-SiO{sub 2} glass ceramic is prepared by melt crystallization method. The optimum heat treatment schedule is determined on basis of differential scanning calorimetry. The crystal phase is BaWO{sub 4} by X-ray diffraction analysis. The crystal grain sizes are examined by scanning electron microscope and crystal grain sizes increase with the increasing of heat treatment time. In the visible region, the transmittance of glass ceramic is 79%. The up-conversion fluorescence intensity increase with the increasing of heat treatment time up to 90 min and with the increasing of Yb{sup 3+} concentration up to 0.3 mol%. The possible mechanism of up-conversion in Tb{sup 3+}/Yb{sup 3+} co-doped BaWO{sub 4} glass ceramic is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimizing Service Restoration in Distribution Systems With Uncertain Repair Time and Demand

This paper proposes a novel method to co-optimize the distribution system operation and repair crew routing for outage restoration after extreme weather events. A two-stage stochastic mixed integer linear program is developed. The first stage is to dispatch the repair crews to the damaged components. The second stage is distribution system restoration using distributed generators, and reconfiguration. We consider demand uncertainty in terms of a truncated normal forecast error distribution, and model the uncertainty of the repair time using a lognormal distribution. A new decomposition approach, combined with the progressive hedging algorithm, is developed for solving large-scale outage management problems in an effective and timely manner. Furthermore, the proposed method is validated on modified IEEE 34- and 8500-bus distribution test systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Integrated Multi Scale Data Analytics and Machine Learning for the Grid; Benchmarking Algorithms and Data Quality Analysis

Machine Learning and Data Analytics are terms which are utilized now ubiquitously throughout grid analytics forums, as a potential solution to the growing big data challenges for the distribution grid. As sensors become inexpensive and common, and communication networks grow, the analytics themselves must adapt and enable consumers and providers to visualize and utilize the data provided effectively. Machine learning is one of the techniques proposed in order to manage this data deluge. This report is a subset of the work in this activity, funded through the DOE Grid Modernization Initiative, to summarize the benchmarking and review of data quality impact on the algorithm sets being developed within each use case area.

42 ENGINEERING↗

Pressure Impact on the Crystal Structure, Optical, and Transport Properties in Layered Oxychalcogenides BiCu Ch O( Ch = S, Se)

The layered oxychalcogenides BiCuChO (Ch = S, Se, Te) represent a unique family of two-dimensional semiconductors with extraordinary optoelectronic and thermoelectric properties. Chemical strategies such as elemental doping have been used to modify their crystal structures and electronic configurations for better photocatalytic performances. Herein, we report the pressure impact on the crystalline and electronic band structures of BiCuChO (Ch = S, Se) with in situ synchrotron X-ray diffraction, Raman spectroscopy, electric resistivity and photocurrent measurements, and first-principle calculations. Under pressure, the crystalline lattices shrink continuously without symmetry breaking, which enhances the crystal field splitting; on the other hand, the pressure-induced charge delocalization causes the band broadening. The competition between the crystal field and charge delocalization demonstrates an efficient tool for band gap engineering: the electrical conductivity is enhanced below 12 GPa and monotonically decreases up to 40 GPa. In addition, BiCuSeO exhibits considerable photocurrent up to ~40 GPa, which suggests its potential application in pressure-responsive optoelectrical devices. Lastly, the comprehensive studies of the pressure effect on the crystal structure and electronic properties in two-dimensional semiconductors provide and in-depth understanding for developing new optoelectronic materials under extreme conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of a self-regulated in vitro hypoxic system by using chemical reactions

Highlights: • A self-regulated in vitro hypoxic system has been established using chemical reactions. • The chemical reaction was able to sustain the basic requirements of CO{sub 2} and pH levels of cell culture. • The hypoxia box design may provide countless applications for the study of hypoxia. In this study, we established an in vitro hypoxic system driven by a self-regulated chemical reaction that proved effective for cell culture. The hypoxic device was modified from a 1.5 L polypropylene preservation box normally employed for food storage. Pyrogallic acid, sodium hydroxide, and sodium carbonate were dissolved in water and injected into the box. Sodium dihydrogen phosphate solution was injected into the box after 15 min. We measured the concentrations of oxygen and carbon dioxide in the box to determine viability of the hypoxic system. It maintained low levels of oxygen less than 0.2% and stabilizing levels of carbon dioxide at 5% for at least 96 h. Therefore, this device sustained a stable hypoxic environment that may be applicable for cell culture and in vitro studies of hypoxia.

60 APPLIED LIFE SCIENCES↗

Concentration Dependence of Dopant Electronic Structure in Bottom-up Graphene Nanoribbons

Bottom-up fabrication techniques enable atomically precise integration of dopant atoms into the structure of graphene nanoribbons (GNRs). Such dopants exhibit perfect alignment within GNRs and behave differently from bulk semiconductor dopants. The effect of dopant concentration on the electronic structure of GNRs, however, remains unclear despite its importance in future electronics applications. Here we use scanning tunneling microscopy and first-principles calculations to investigate the electronic structure of bottom-up synthesized N = 7 armchair GNRs featuring varying concentrations of boron dopants. First-principles calculations of freestanding GNRs predict that the inclusion of boron atoms into a GNR backbone should induce two sharp dopant states whose energy splitting varies with dopant concentration. Scanning tunneling spectroscopy experiments, however, reveal two broad dopant states with an energy splitting greater than expected. Here, this anomalous behavior results from an unusual hybridization between the dopant states and the Au(111) surface, with the dopant–surface interaction strength dictated by the dopant orbital symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chapman–Enskog Analyses on the Gray Lattice Boltzmann Equation Method for Fluid Flow in Porous Media

The gray lattice Boltzmann equation (GLBE) method has recently been used to simulate fluid flow in porous media. It employs a partial bounce-back of populations (through a fractional coefficient θ, which represents the fraction of populations being reflected by the solid phase) in the evolution equation to account for the linear drag of the medium. Several particular GLBE schemes have been proposed in the literature and these schemes are very easy to implement; but there exists uncertainty about the need for redefining the macroscopic velocity as there has been no systematic analysis to recover the Brinkman equation from the various GLBE schemes. Rigorous Chapman–Enskog analyses are carried out to show that the momentum equation recovered from these schemes can satisfy Brinkman equation to second order in ϵ only if θ=O(ϵ) in which ϵ is the ratio of the lattice spacing to the characteristic length of physical dimension. The need for redefining macroscopic velocity is shown to be scheme-dependent. When a body force is encountered such as the gravitational force or that caused by a pressure gradient, different forms of forcing redefinitions are required for each GLBE scheme.

42 ENGINEERING↗

B2 Grain Growth Behavior of a Ti-22Al-25Nb Alloy Fabricated by Hot Pressing Sintering

Grain growth behavior of a powder metallurgy (P/M) Ti-22Al-25Nb alloy was investigated by applying a series of isothermal treatment tests over a wide range of temperatures and holding times. An isothermal treatment scheme was conducted in the B2 phase region (1070-1110 °C) and α{sub 2} + B2 phase region (1010-1050 °C) at holding times of 10, 30 min, 1, 2, and 3 h, respectively. The effects of temperature and holding time on the microstructure evolution and microhardness of the P/M Ti-22Al-25Nb alloy at elevated temperatures were evaluated using optical microscope, scanning electron microscope, x-ray diffraction, and Vickers hardness test techniques. The results revealed that the alloy’s treated microstructure was closely linked to temperature and holding time, respectively. The change law of B2 grain growth with holding time and temperature can be well interpreted by the Beck equation and Hillert equation, respectively. The B2 grain growth exponent n and activation energy Q were acquired based on experimental data in the α{sub 2} + B2 and B2 phase regions. In addition, the grain growth contour map for the P/M Ti-22Al-25Nb alloy was constructed to depict variations in B2 grain size based on holding time and temperature.

36 MATERIALS SCIENCE↗

Short-term exposures to PM2.5 and cause-specific mortality of cardiovascular health in China

Highlights: • Exploring the association between PM{sub 2.5} and cardiovascular mortality in China. • Suggesting that people 65–74 years old and males might be more vulnerable to PM{sub 2.5}. • Showing the difference of PM{sub 2.5} acute effect between developed countries and China. Many multi-center epidemiological studies have robustly examined the acute health effects of exposure to low concentrations of fine particulate matter (PM{sub 2.5}) on cardiovascular mortality in developed counties. However, data limitations have resulted in few related studies being conducted in developing counties with high levels of PM{sub 2.5} exposure. In recent years, people in China with a heavy cardiovascular disease burden have been exposed to particularly high levels of PM{sub 2.5}.

54 ENVIRONMENTAL SCIENCES↗

Structure of the nucleon’s low-lying excitations

Here, a continuum approach to the three valence-quark bound-state problem in quantum field theory is used to perform a comparative study of the four lightest ( I = 1/2, J P = 1/2 ± ) baryon isospin doublets in order to elucidate their structural similarities and differences. Such analyses predict the presence of nonpointlike, electromagnetically active quark-quark (diquark) correlations within all baryons; and in these doublets, isoscalar-scalar, isovector-pseudovector, isoscalar-pseudoscalar, and vector diquarks can all play a role. In the two lightest (1/2,1/2 + ) doublets, however, scalar and pseudovector diquarks are overwhelmingly dominant. The associated rest-frame wave functions are largely S-wave in nature; and the first excited state in this 1/2 + channel has the appearance of a radial excitation of the ground state. The two lightest (1/2,1/2 – ) doublets fit a different picture: accurate estimates of their masses are obtained by retaining only pseudovector diquarks; in their rest frames, the amplitudes describing their dressed-quark cores contain roughly equal fractions of even- and odd-parity diquarks; and the associated wave functions are predominantly P-wave in nature, but possess measurable S-wave components. Moreover, the first excited state in each negative-parity channel has little of the appearance of a radial excitation. In quantum field theory, all differences between positive- and negative-parity channels must owe to chiral symmetry breaking, which is overwhelmingly dynamical in the light-quark sector. Consequently, experiments that can validate the contrasts drawn herein between the structure of the four lightest (1/2,1/2 ± ) doublets will prove valuable in testing links between emergent mass generation and observable phenomena and, plausibly, thereby revealing dynamical features of confinement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Off-Shell Persistence of Composite Pions and Kaons

In order for a Sullivan-like process to provide reliable access to a meson target as t becomes spacelike, the pole associated with that meson should remain the dominant feature of the quarkantiquark scattering matrix and the wave function describing the related correlation must evolve slowly and smoothly. Using continuum methods for the strong-interaction bound-state problem, we explore and delineate the circumstances under which these conditions are satisfied: for the pion, this requires -t ≲ 0.6 GeV 2 , whereas -t ≲ 0.9 GeV 2 will suffice for the kaon. Furthermore, these results should prove useful in evaluating the potential of numerous experiments at existing and proposed facilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Angiotensin-converting enzyme 2 regulates mitochondrial function in pancreatic β-cells

Highlights: • ACE2 improved glucose stimulated insulin secretion (GSIS) and mitochondrial membrane potential in INS-1 cells. • PCR array demonstrated that ACE2 up-regulated 67 mitochondria-related genes in INS-1 cells. • ACE2 deletion suppressed mitochondrial oxidation and calcium influx in islets. • ACE2 over-expression in db/db mice promoted mitochondrial oxidation and calcium influx in islets. Mitochondrial metabolism plays an essential role in the regulation of insulin release and glucose homeostasis. Evidence demonstrated that the angiotensin-converting enzyme 2 (ACE2) participates in the regulation of glucose metabolism, however, its role in mitochondrial metabolism remains unclear. The purpose of our study was to determine if ACE2 can regulate mitochondrial function in pancreatic β-cells. We found that ACE2 over-expression restored glucose-stimulated insulin secretion (GSIS) and mitochondrial membrane potential (MMP) in the presence of H{sub 2}O{sub 2} in INS-1 cells. PCR array demonstrated that ACE2 over-expression up-regulated 67 mitochondria-related genes in INS-1 cells. In pancreatic islets, ACE2 ablation attenuated intracellular calcium influx with a decrease in GSIS. Ace2{sup −/y} mice islets exhibited impaired mitochondrial respiration and lower production of ATP, along with decreased expression of genes involved in mitochondrial oxidation. In islets from db/db mice, ACE2 over-expression increased intracellular calcium influx and restored impaired mitochondrial oxidation, potentially causing an increase in GSIS. These results shed light on the potential roles of ACE2 in mitochondrial metabolism, moreover, may improve our understanding of diabetes.

60 APPLIED LIFE SCIENCES↗

Tetrahydroxystilbene glucoside modulates amyloid precursor protein processing via activation of AKT-GSK3β pathway in cells and in APP/PS1 transgenic mice

Alternative splicing of amyloid precursor protein (APP) exon 7 generates the isoforms containing a Kunitz protease inhibitor (KPI) domain. APP-KPI levels in the brain are correlated with amyloid beta (Aβ) production. Here, we determined the effect of Tetrahydroxystilbene glucoside (TSG) on the AKT-GSK3β pathway. We found GSK3β increased APP-KPI inclusion level and interacted with the splicing factor ASF. TSG was intragastrically administered to 5-month-old APP/PS1 transgenic mice for 12 months. We found that the activated the AKT-GSK3β signaling pathway suppressed APP-KPI inclusion. Moreover, TSG treatment attenuated amyloid deposition in APP/PS1 mice. This study demonstrates the neuroprotective effect of TSG on APP expression, suggesting that TSG may be beneficial for AD prevention and treatment.

60 APPLIED LIFE SCIENCES↗

Effects of Overlapping Distances on Steel Microstructure and Properties After Multi-track Laser Quenching

In this study, multi-track laser quenching with different overlapping distances was used to assess SM45C microstructure and properties. Two overlapping distance types were evaluated, including overlapping distances in the transition and martensite regions, respectively. After multi-track quenching, hardness showed a threefold increase. With the overlapping distance in the transition region, surface hardness varied from 600 to 700 HV. There was a region of low hardness in each track. Hardness in the low hardness region was from 300 to 400 HV. The average hardness was basically over 500 HV with the overlapping distance in the martensite region, although there was a softening region. The increased hardness was mainly caused by the martensite. Microstructure in the overlapping region was self-tempered martensite, retained austenite and ferrite. Tempered sorbite and lowly tempered martensite were observed in heat-affected zones. Friction coefficients of quenched specimens varied between 0.275 and 0.325, with a 14% reduction relative to the base metal. The wear rate of the quenched specimen was only 40.8% of the base metal. With time, mass reduction in the quenched specimen was much smaller than that of the base metal. For specimens treated with laser quenching, slight fatigue wear was dominating.

36 MATERIALS SCIENCE↗