Engineering Papers⌕ Search

Engineering topics

Chen, C

Publications and source records attributed to Chen, C.

At least 91 records · Page 5

KLL dielectronic recombination resonant strengths of He-like up to O-like xenon ions

In this work, the KLL dielectronic recombination (DR) resonant strengths of He- through to O-like Xe ions were studied, both through experiment and calculation. The experiments were done using a fast electron beam-energy scanning technique at the Shanghai electron beam ion trap. The calculations were done by using the flexible atomic code (FAC), in which the relativistic configuration interaction (RCI) method was employed. For the total resonant strengths, the present experimental and theoretical results for He-, Be-, B-, C-, N-, and O-like Xe ions agree within experimental uncertainties (about 9%). But the experimental result for Li-like Xe is 14% higher than the calculation. The present FAC calculations of the total DR strengths were compared with the available previous calculations, using RCI or multiconfiguration Dirac-Fock (MCDF) methods, and the agreement was very good. In this work, some intermediate-state resolved KLL DR strengths were also obtained and compared with theoretical results, and more discrepancies were revealed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Crystallization of the Membrane-Associated Annexin B1: Roles of Additive Screen, Dynamic Light Scattering, and Bioactivity Assay

Annexin B1 (AnxB1) is a calcium-dependent phospholipid binding protein from Taenia solium cysticercus and has been reported to possess anticoagulant activity, to inhibit phospholipase A{sub 2}, and to regulate membrane transport. Native AnxB1 and its selenomethionyl derivative have been overproduced in Escherichia coli and purified. The results of dynamic light scattering analysis showed that Hepes buffer combined with low concentration salts (NaCl or CaCl{sub 2}) was beneficial for preventing aggregation and for AnxB1 stabilization in the storage. After the additive screen, crystals have been yielded in the presence of guanidine hydrochloride (Gn-HCl). We determined that a low concentration of Gn-HCl significantly delayed clotting time and increased anticoagulant activity. Analysis of the crystal showed that in the presence of Gn-HCl, AnxB1 crystallizes in orthorhombic space group, which is modified from the cubic space group for crystals grown in the absence of Gn-HCl. A high quality data set (at 1.9 {angstrom}) has been collected successfully for crystals of L-selenomethionine labeled protein in the presence of Gn-HCl, to solve the structure with the single anomalous dispersion method (SAD). The unit cell parameters are a = 102.35 {angstrom}, b = 103.59 {angstrom}, c = 114.60 {angstrom}, {alpha} = {beta} = {gamma} = 90.00{sup o}.

59 BASIC BIOLOGICAL SCIENCES↗

Zeolite-supported Metal Complexes of Rhodium and of Ruthenium: a General Synthesis Method Influenced by Molecular Sieving Effects

A general method for synthesis of supported metal complexes having a high degree of uniformity is presented, whereby organometallic precursors incorporating acetylacetonate (C{sub 5}H{sub 7}O{sub 2}{sup -}, acac) ligands react with zeolites incorporating OHgroups near Al sites. The method is illustrated by the reactions of Rh(acac)(CO){sub 2} and of cis-Ru(acac){sub 2}({eta}{sup 2}-C{sub 2}H{sub 4}){sub 2} with zeolites slurried in n-pentane at room temperature. The zeolites were H-Beta, H-SSZ-42, H-Mordenite, and HZSM-5. Infrared (IR) and extended X-ray absorption fine structure spectra of the zeolites incorporating rhodium complexes indicate the formation of Rh(CO){sub 2}{sup +} bonded near Al sites; similar results have been reported for the formation of zeolite-supported Rh({eta}{sup 2}-C{sub 2}H{sub 4}){sup 2+} from Rh(acac)({eta}{sup 2}-C{sub 2}H{sub 4}){sub 2}. IR spectra of the supported rhodiumgem-dicarbonyls include sharp, well-resolved {nu}{sub CO} bands, demonstrating that the sites surrounding each metal complex are nearly equivalent. The frequencies of the {nu}{sub CO} bands show how the composition of the zeolite influences the bonding of the supported species, demonstrating subtle differences in the roles of the zeolite as ligands. When the zeolite has pore openings larger than the critical diameter of the precursor organometallic compound, the latter undergoes facile transport into the interior of the zeolite, so that a uniform distribution of the supported species results, but when the precursors barely fit through the zeolite apertures, the mass transport resistance is significant and the supported metal complexes are concentrated near the pore mouths.

36 MATERIALS SCIENCE↗

DISCOVERY OF FOG AT THE SOUTH POLE OF TITAN

While Saturn's moon Titan appears to support an active methane hydrological cycle, no direct evidence for surface-atmosphere exchange has yet appeared. The indirect evidence, while compelling, could be misleading. It is possible, for example, that the identified lake features could be filled with ethane, an involatile long-term residue of atmospheric photolysis; the apparent stream and channel features could be ancient remnants of a previous climate; and the tropospheric methane clouds, while frequent, could cause no rain to reach the surface. We report here the detection of fog at the south pole of Titan during late summer using observations from the VIMS instrument on board the Cassini spacecraft. While terrestrial fog can form from a variety of causes, most of these processes are inoperable on Titan. Fog on Titan can only be caused by evaporation of nearly pure liquid methane; the detection of fog provides the first direct link between surface and atmospheric methane. Based on the detections presented here, liquid methane appears widespread at the south pole of Titan in late southern summer, and the hydrological cycle on Titan is currently active.

79 ASTRONOMY AND ASTROPHYSICS↗

Microstructure and a Nucleation Mechanism for Nanoprecipitates In PbTe-AgSbTe2

Many recent advances in thermoelectric (TE) materials are attributed to their nanoscale constituents. Determination of the nanocomposite structures has represented a major experimental and computational challenge and eluded previous attempts. Here we present the first atomically resolved structures of high performance TE material PbTe-AgSbTe{sub 2} by transmission electron microscopy imaging and density functional theory calculations. The results establish an accurate structural characterization for PbTe-AgSbTe{sub 2} and identify the interplay of electric dipolar interactions and strain fields as the driving mechanism for nanoprecipitate nucleation and aggregation.

36 MATERIALS SCIENCE↗

Influence of strain and grain boundary variations on magnetism of Cr-doped AlN films

Cr-doped AlN films are prepared by reactive dc magnetron cosputtering under a negative substrate bias ranging from 50 to 110 V. The bias induces variation of the texture from (002) to (110) orientation, enhances the stress and reduces the grain size in the films. All of the samples are ferromagnetic. The atomic magnetic moment (AMM) of Cr increases with the bias from 50 to 90 V and reaches the maximum of 0.18mu{sub B}/Cr at a bias of 90 V. As the bias increases further to 110 V, the AMM decreases. The dielectric constant also changes in the same trend with the bias, as well as the AMM does. The variations in these two properties are determined by the collective effects of the lattice deformations induced by the changing stress, the amount of boundary defects and the grain size in the films.

36 MATERIALS SCIENCE↗

Making Relativistic Positrons Using Ultra-Intense Short Pulse Lasers

This paper describes a new positron source produced using ultra-intense short pulse lasers. Although it has been studied in theory since as early as the 1970s, the use of lasers as a valuable new positron source was not demonstrated experimentally until recent years, when the petawatt-class short pulse lasers were developed. In 2008 and 2009, in a series of experiments performed at Lawrence Livermore National Laboratory, a large number of positrons were observed after shooting a millimeter thick solid gold target. Up to 2 x 10{sup 10} positrons per steradian ejected out the back of {approx}mm thick gold targets were detected. The targets were illuminated with short ({approx}1 ps) ultra-intense ({approx}1 x 10{sup 20} W/cm{sup 2}) laser pulses. These positrons are produced predominantly by the Bethe-Heitler process, and have an effective temperature of 2-4 MeV, with the distribution peaking at 4-7 MeV. The angular distribution of the positrons is anisotropic. For a wide range of applications, this new laser based positron source with its unique characteristics may complements the existing sources using radioactive isotopes and accelerators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MILAGRO OBSERVATIONS OF MULTI-TeV EMISSION FROM GALACTIC SOURCES IN THE FERMI BRIGHT SOURCE LIST

We present the result of a search of the Milagro sky map for spatial correlations with sources from a subset of the recent Fermi Bright Source List (BSL). The BSL consists of the 205 most significant sources detected above 100 MeV by the Fermi Large Area Telescope. We select sources based on their categorization in the BSL, taking all confirmed or possible Galactic sources in the field of view of Milagro. Of the 34 Fermi sources selected, 14 are observed by Milagro at a significance of 3 standard deviations or more. We conduct this search with a new analysis which employs newly optimized gamma-hadron separation and utilizes the full eight-year Milagro data set. Milagro is sensitive to gamma rays with energy from 1 to 100 TeV with a peak sensitivity from 10 to 50 TeV depending on the source spectrum and declination. These results extend the observation of these sources far above the Fermi energy band. With the new analysis and additional data, multi-TeV emission is definitively observed associated with the Fermi pulsar, J2229.0+6114, in the Boomerang pulsar wind nebula (PWN). Furthermore, an extended region of multi-TeV emission is associated with the Fermi pulsar, J0634.0+1745, the Geminga pulsar.

99 GENERAL AND MISCELLANEOUS↗

The Fabrication Of Insulating Layer On 4H-SiC By Hot Wire Nitridation

Nitride layer was formed on SiC surface by the hot wire assisted nitridation. The surface was characterized by XPS to discuss the effects of hot wire assistance. The nitride layer comprised of SiO{sub x}N{sub y} and Si{sub 3}N{sub 4}, and the interfacial layer was mainly Si{sub 3}N{sub 4}. Nitrogen concentration in the nitride layer increased with increasing substrate temperature and reaction time.

36 MATERIALS SCIENCE↗

Crystal Structure of Human Retinoblastoma Binding Protein 9

As a step towards better integrating protein three-dimensional (3D) structural information in cancer systems biology, the Northeast Structural Genomics Consortium (NESG) (www.nesg.org) has constructed a Human Cancer Pathway Protein Interaction Network (HCPIN) by analysis of several classical cancer-associated signaling pathways and their physical protein-protein interactions. Many well-known cancer-associated proteins play central roles as hubs or bottlenecks in the HCPIN (http://nmr.cabm.rutgers.edu/hcpin). NESG has selected more than 1000 human proteins and protein domains from the HCPIN for sample production and 3D structure determination. The long-range goal of this effort is to provide a comprehensive 3D structure-function database for human cancer-associated proteins and protein complexes, in the context of their interaction networks. Human retinoblastoma binding protein 9 (RBBP9) is one of the HCPIN proteins targeted by NESG. RBBP9 was initially identified as the product of a new gene, Bog (for B5T over-expressed gene), in several transformed rat liver epithelial cell lines resistant to the growth-inhibitory effect of TGF-1 as well as in primary human liver tumors. RBBP9 contains the retinoblastoma (Rb) binding motif LxCxE in its sequence, and was shown to interact with Rb by yeast two-hybrid and coimmunoprecipitation experiments. Mutation of the Leu residue in this motif to Gln blocked the binding to Rb. RBBP9 can displace E2F1 from E2F1-Rb complexes, and over expression of RBBP9 overcomes TGF-1 induced growth arrest and results in transformation of rat liver epithelial cells leading to hepatoblastoma-like tumors in nude mice. RBBP9 may also play a role in cellular responses to chronic low dose radiation. A close homolog of RBBP9, sharing 93% amino acid sequence identity and also known as RBBP10, interacts with a protein with sua5-yciO-yrdC domains.

36 MATERIALS SCIENCE↗

Helical Nanocomposites from Chiral Block Copolymer Templates

Three-dimensional hexagonally packed PLLA nanohelices in the PS matrix were formed in the self-assembly of PS-PLLA chiral block copolymer. After hydrolysis of the PLLA blocks, PS with hexagonally packed helical nanochannels can be fabricated and treated as the template for the following sol-gel process. Subsequently, silica precursor mixture was introduced into the PS template by a pore-filling process. Well-defined helical nanocomposites with SiO2 inorganic nanohelices orderly dispersed in polymeric matrix can be successfully obtained after the sol-gel process. As a result, with the combination of the self-assembly of degradable block copolymers and sol-gel chemistry, we suggest a novel method for the preparation of the helical nanocomposites with ordered texture.

36 MATERIALS SCIENCE↗

Block Copolymers with a Twist

Chiral block copolymers (BCPs*) comprising chiral entities were designed to fabricate helical architectures (i.e., twisted morphologies) from self-assembly. A new helical phase (H*) with P622 symmetry was discovered in the self-assembly of poly(styrene)-b-poly(l-lactide) (PS-PLLA) BCPs*. Hexagonally packed, interdigitated PLLA helical microdomains in a PS matrix were directly visualized by electron tomography. The phase diagram of the PS-PLLA BCPs* was also established. Phase transitions from the H* phase to the stable cylinder and gyroid phases were found after long-time annealing, suggesting that the H* is a long-lived metastable phase. In contrast to racemic poly(styrene)-b-poly(d,l-lactide) BCPs, chiral interaction significantly enhances the incompatibility between achiral PS and chiral PLLA blocks in the PS-PLLA BCPs* and can be estimated through the determination of the interaction parameter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of backlighting sources for a Compton radiography diagnostic of inertial confinement fusion targets (invited)

We present scaled demonstrations of backlighter sources, emitting bremsstrahlung x rays with photon energies above 75 keV, that we will use to record x-ray Compton radiographic snapshots of cold dense DT fuel in inertial confinement fusion implosions at the National Ignition Facility (NIF). In experiments performed at the Titan laser facility at Lawrence Livermore National Laboratory, we measured the source size and the bremsstrahlung spectrum as a function of laser intensity and pulse length from solid targets irradiated at 2x10{sup 17}-5x10{sup 18} W/cm{sup 2} using 2-40 ps pulses. Using Au planar foils we achieved source sizes down to 5.5 {mu}m and conversion efficiencies of about 1x10{sup -13} J/J into x-ray photons with energies in the 75-100 keV spectral range. We can now use these results to design NIF backlighter targets and shielding and to predict Compton radiography performance as a function of the NIF implosion yield and associated background.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Bremsstrahlung spectrometer using k-edge and differential filters with image plate dosimeters

A Bremsstrahlung spectrometer using k-edge and differential filtering has been used with image plate dosimeters to measure the x-ray fluence from short-pulse laser/target interactions. An electron spectrometer in front of the Bremsstrahlung spectrometer deflects electrons from the x-ray line of sight and simultaneously measures the electron spectrum. The response functions were modeled with the Monte Carlo code INTEGRATED TIGER SERIES 3.0 and the dosimeters calibrated with radioactive sources. An electron distribution with a slope temperature of 1.3 MeV is inferred from the Bremsstrahlung spectra.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electron heated target temperature measurements in petawatt laser experiments based on extreme ultraviolet imaging and spectroscopy

Three independent methods (extreme ultraviolet spectroscopy, imaging at 68 and 256 eV) have been used to measure planar target rear surface plasma temperature due to heating by hot electrons. The hot electrons are produced by ultraintense laser-plasma interactions using the 150 J, 0.5 ps Titan laser. Soft x-ray spectroscopy in the 50-400 eV region and imaging at the 68 and 256 eV photon energies give a planar deuterated carbon target rear surface pre-expansion temperature in the 125-150 eV range, with the rear plasma plume averaging a temperature approximately 74 eV.

07 ISOTOPE AND RADIATION SOURCES↗

Mercury Bromide (HgBr{sub 2}): A promising nonlinear optical material in IR region with a high laser damage threshold

Nonlinear optical (NLO) crystals have played a key role in laser technology, and the existing materials for the IR range showed relatively low laser damage threshold in common. A NLO material HgBr{sub 2} is presented here. It shows a powder second harmonic generation about ten times as large as that of KH{sub 2}PO{sub 4}, a wide transparency in whole mid-IR region (from 2.5 to 25 {mu}m), and a good stability to the environment. Most importantly it exhibits a high laser damage threshold of about 0.3 GW/cm{sup 2}. Therefore, it is believed that HgBr{sub 2} is a promising candidate for NLO materials in the IR region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pore-scale analysis of permeability reduction resulting from colloid deposition

High-energy, synchrotron-based x-ray difference micro-tomography (XDMT) was combined with lattice Boltzmann simulations to assess changes in pore-scale flow patterns and bulk permeability resulting from colloid deposition in a granular porous medium. The detailed structural information obtained from XDMT was used to define internal boundary conditions for simulations of pore fluid flow both with and without colloidal deposits. As colloids accumulated in the pore space, the mean tortuosity increased and the tortuosity distribution became multi-modal, indicating the development of macro-scale heterogeneity. These structural changes also produced large reductions in bulk permeability that were not captured by empirical or semi-empirical estimators based on the first-order geometric properties of the porous medium. This work demonstrates that coupling between fluid flow and particle transport produces heterogeneities at the sub-millimeter scale that greatly affect the hydrogeologic properties of natural porous media.

42 ENGINEERING↗