Engineering Papers⌕ Search

Engineering topics

Chen, C

Publications and source records attributed to Chen, C.

At least 73 records · Page 4

Epitaxial Strain-Induced Chemical Ordering in La0.5Sr0.5CoO3-delta Films on SrTiO3

Fast ion conductors are at the foundation of a number of important technologies, ranging from fuel cells to batteries to gas separators. Recent results suggest that strained interfaces and thin films may offer new mechanisms for achieving enhanced ionic transport. In this work, we investigate strained 40-nm films of perovskite La{sub 0.5}Sr{sub 0.5}CoO{sub 3-{delta}}, which is an important material for solid oxide fuel cell cathodes and oxygen separation membranes. We demonstrate that a strained thin film of La{sub 0.5}Sr{sub 0.5}CoO{sub 3-{delta}} on SrTiO{sub 3} can have dramatically different anion and cation thermodynamics and kinetics than bulk La{sub 0.5}Sr{sub 0.5}CaO{sub 3-{delta}}. We use synchrotron X-ray diffraction to show that La{sub 0.5}Sr{sub 0.5}CoO{sub 3-{delta}} thin films form an ordered phase at 650 K. The ordered phase consists of La and Sr cations in planes parallel to the surface and is associated with coherent expansion in the c-direction of {approx}5%. This chemical ordering is not observed in the bulk material and is ascribed to the interplay between the epitaxial strain imposed by the substrate, changes in oxygen vacancy content and cation mobility, and the ordering of oxygen vacancies.

30 DIRECT ENERGY CONVERSION↗

Suppressing the Skin-Core Structure of Injection-Molded Isotactic Polypropylene via Combination of an in situ Microfibrillar Network and an Interfacial Compatibilizer

Injection-molded semicrystalline polymer parts generally exhibited a so-called skin-core structure basically as a result of the large gradients of temperature, shear rate, stress, and pressure fields created by the boundary conditions of injection molding. Suppression of the skin-core structure is a long-term practical challenge. In the current work, the skin-core structure of the conventional injection-molded isotactic polypropylene (iPP) was largely relieved by the cooperative effects of an in situ microfibrillar network and interfacial compatibilizer. The in situ poly(ethylene terephthalate) microfibrils of 1-8 {micro}m in diameter and large aspect ratios of above 40 tended to entangle with each other to generate a microfibrillar network in the iPP melt. During injection molding, the iPP molecules experienced confined flow in the microchannels or pores formed by the microfibrillar network, which could redistribute and homogenize the flow field of polymer melt. Addition of the compatibilizer, glycidyl methacrylate-grafted iPP, restrained the molecular orientation but facilitated preservation of oriented molecules due to the chemical bonds at the interface between PET microfibrils and iPP. The cooperative effects of in situ microfibrillar network and interfacial compatibilizer led to almost the same molecular orientation across the whole thickness of the injection-molded parts. Additionally, the content of {beta} crystals in different layers of injection-molded iPP parts depended on the combined effects of the molecular orientation, the amount of oriented crystals, and the crystallization time between 105 and 140 C. The presence of the interfacial compatibilizer facilitated formation of the {beta} crystals because of preservation of the oriented molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphene Nanosheets and Shear Flow Induced Crystallization in Isotactic Polypropylene Nanocomposites

Combined effects of graphene nanosheets (GNSs) and shear flow on the crystallization behavior of isotactic polypropylene (iPP) were investigated by in-situ synchrotron wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) techniques. For crystallization under quiescent condition (at 145 C), the half-crystallization time (t{sub 1/2}) of nanocomposites containing 0.05 and 0.1 wt % GNSs was reduced to at least 50% compared to that of neat iPP, indicating the high nucleation ability of GNSs. The crystallization rate of iPP was directly proportional to the GNS content. Under a relatively weak shear flow (at a rate of 20 s{sup -1} for 5 s duration) and a low degree of supercooling, the neat iPP exhibited an isotropic structure due to the relaxation of row nuclei. However, visible antisotropic crystals appeared in sheared iPP/GNSs nanocomposites, indicating that GNSs induced a network structure hindering the mobility of iPP chains and allowing the survival of oriented row nuclei for a long period of time. The presence of GNSs clearly enhanced the effects of shear-induced nucleation as well as orientation of iPP crystals. Two kinds of nucleating origins coexisted in the sheared nanocomposite melt: heterogeneous nucleating sites initiated by GNSs and homogeneous nucleating sites (row nuclei) induced by shear. The difference of t{sub 1/2} of nanocomposites with and without shear was significantly larger than that of neat iPP. The presence of GNSs and shear flow exhibited a synergistic interaction on promoting crystallization kinetics of iPP, although the effect of GNS concentration was not apparent. From WAXD results of isothermal and nonisothermal crystallization of sheared iPP, it was found that the appearance of {beta}-crystals depended on the preservation of row nuclei, where the {alpha}-crystals were predominant in the iPP/GNSs nanocomposites, indicating that GNSs could directly induce {alpha}-crystals of iPP.

36 MATERIALS SCIENCE↗

Characterizing the Effects of Etch-induced Material Modification on the Crystallization Properties of Nitron Doped Ge2Sb2Te5

The chemical and structural effects of processing on the crystallization of nitrogen doped Ge{sub 2}Sb{sub 2}Te{sub 5} is examined via x-ray photoelectron spectroscopy (XPS), x-ray absorption spectroscopy (XAS), time resolved laser reflectivity, and time resolved x-ray diffraction (XRD). Time resolved laser reflectivity and XRD show that exposure to various etch and ash chemistries significantly reduces the crystallization speed while the transition temperature from the rocksalt to the hexagonal phase is increased. XPS and XAS attribute this to the selective removal and oxidization of N, Ge, Sb, and Te, thus altering the local bonding environment to the detriment of device performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Novel Mode of Protein Kinase Inhibition Exploiting Hydrophobic Motifs of Autoinhibited Kinases

Protein kinase inhibitors with enhanced selectivity can be designed by optimizing binding interactions with less conserved inactive conformations because such inhibitors will be less likely to compete with ATP for binding and therefore may be less impacted by high intracellular concentrations of ATP. Analysis of the ATP-binding cleft in a number of inactive protein kinases, particularly in the autoinhibited conformation, led to the identification of a previously undisclosed non-polar region in this cleft. This ATP-incompatible hydrophobic region is distinct from the previously characterized hydrophobic allosteric back pocket, as well as the main pocket. Generalized hypothetical models of inactive kinases were constructed and, for the work described here, we selected the fibroblast growth factor receptor (FGFR) tyrosine kinase family as a case study. Initial optimization of a FGFR2 inhibitor identified from a library of commercial compounds was guided using structural information from the model. We describe the inhibitory characteristics of this compound in biophysical, biochemical, and cell-based assays, and have characterized the binding mode using x-ray crystallographic studies. The results demonstrate, as expected, that these inhibitors prevent activation of the autoinhibited conformation, retain full inhibitory potency in the presence of physiological concentrations of ATP, and have favorable inhibitory activity in cancer cells. Given the widespread regulation of kinases by autoinhibitory mechanisms, the approach described herein provides a new paradigm for the discovery of inhibitors by targeting inactive conformations of protein kinases.

59 BASIC BIOLOGICAL SCIENCES↗

Single Helix to Double Gyroid in Chiral Block Copolymers

An order-order phase transition of chiral block copolymers (BCPs*) from single helix to double gyroid (H* {yields} G) through a nucleation and growth process was demonstrated. The H* and G phases can be obtained by solution casting from fast and slow solvent evaporation, respectively, suggesting that the H* phase is a metastable phase. Consequently, the coexistence of H* and G phases can be found in the solution-cast samples from intermediate solvent evaporation. To truly examine the transition mechanism of the H* {yields} G, electron tomography was carried out to directly visualize the morphological evolution in real space, in particular, the transition zone at interface. Unlike the mechanisms for the transitions of block copolymers (BCPs) by considering the interdomain spacing matching, a significant mismatch in the lattices for the H* {yields} G was found. Consequently, the transition may require an adjustment on the geometric dimensions to justify corresponding lattice mismatch. As a result, the morphological observations from electron tomography offer new insights into BCP phase transitions.

36 MATERIALS SCIENCE↗

High-pressure Evolution of Fe2O3 Electronic Structure Revealed by X-ray Absorption

We report the high-pressure measurement of the Fe K edge in hematite (Fe{sub 2}O{sub 3}) by x-ray absorption spectroscopy in partial fluorescence yield geometry. The pressure-induced evolution of the electronic structure as Fe{sub 2}O{sub 3} transforms from a high-spin insulator to a low-spin metal is reflected in the x-ray absorption pre-edge. The crystal-field splitting energy was found to increase monotonically with pressure up to 48 GPa, above which a series of phase transitions occur. Atomic multiplet, cluster diagonalization, and density-functional calculations were performed to simulate the pre-edge absorption spectra, showing good qualitative agreement with the measurements. The mechanism for the pressure-induced electronic phase transitions of Fe{sub 2}O{sub 3} is discussed and it is shown that ligand hybridization significantly reduces the critical high-spin/low-spin transition pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New Limits on the Ultra-High Energy Cosmic Neutrino Flux from the ANITA Experiment

We report initial results of the first flight of the Antarctic Impulsive Transient Antenna (ANITA-1) 2006-2007 Long Duration Balloon flight, which searched for evidence of a diffuse flux of cosmic neutrinos above energies of E{sub v} = 3 x 10{sup 18} eV. ANITA-1 flew for 35 days looking for radio impulses due to the Askaryan effect in neutrino-induced electromagnetic showers within the Antarctic ice sheets. We report here on our initial analysis, which was performed as a blind search of the data. No neutrino candidates are seen, with no detected physics background. We set model-independent limits based on this result. Upper limits derived from our analysis rule out the highest cosmogenic neutrino models. In a background horizontal-polarization channel, we also detect six events consistent with radio impulses from ultrahigh energy extensive air showers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Initial Results from the ANITA 2006-2007 Balloon Flight

We report initial results of the Antarctic Impulsive Transient Antenna (ANITA) 2006-2007 Long Duration Balloon flight, which searched for evidence of the flux of cosmogenic neutrinos. ANITA flew for 35 days looking for radio impulses that might be due to the Askaryan effect in neutrino-induced electromagnetic showers within the Antarctic ice sheets. In our initial high-threshold robust analysis, no neutrino candidates are seen, with no physics background. In a non-signal horizontal-polarization channel, we do detect 6 events consistent with radio impulses from extensive air showers, which helps to validate the effectiveness of our method. Upper limits derived from our analysis now begin to eliminate the highest cosmogenic neutrino models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE FIRST LIMITS ON THE ULTRA-HIGH ENERGY NEUTRINO FLUENCE FROM GAMMA-RAY BURSTS

We set the first limits on the ultra-high energy (UHE) neutrino fluence at energies greater than 10{sup 9} GeV from gamma-ray bursts (GRBs) based on data from the second flight of the Antarctic Impulsive Transient Antenna (ANITA). During the 31 day flight of ANITA-II, 26 GRBs were recorded by Swift or Fermi. Of these, we analyzed the 12 GRBs which occurred during quiet periods when the payload was away from anthropogenic activity. In a blind analysis, we observe 0 events on a total background of 0.0044 events in the combined prompt window for all 12 low-background bursts. We also observe 0 events from the remaining 14 bursts. We place a 90% confidence level limit on the E{sup -4} prompt neutrino fluence between 10{sup 8} GeV < E < 10{sup 12} GeV of E{sup 4}{Phi} = 2.5 x 10{sup 17} GeV{sup 3} cm{sup -2} from GRB090107A. This is the first reported limit on the UHE neutrino fluence from GRBs above 10{sup 9} GeV, and the strongest limit above 10{sup 8} GeV.

79 ASTRONOMY AND ASTROPHYSICS↗

Absolute measurements of x-ray backlighter sources at energies above 10 keV

Line emission and broadband x-ray sources with x-ray energies above 10 keV have been investigated using a range of calibrated x-ray detectors for use as x-ray backlighters in high energy density (HED) experiments. The conversion efficiency of short- and long-pulse driven Mo and Ag line-emission backlighters at 17 and 22 keV was measured to investigate the crossover region between short- and long-pulse conversion efficiency. It was found that significant 17 and 22 keV line emissions were observed using a 3 {omega}, 1 ns long-pulse drive for Mo and Ag targets and a comparison between the measured Mo x-ray spectrum and calculations using an atomic physics code suggests that the line emission is due to thermal emission from N-like Mo atoms. Electron temperatures derived from fits to the continuum region of the x-ray spectra agree well with the T{sub hot} scaling as 100x(I{lambda}{sup 2}){sup 1/3}. The continuum emissions from empty and 1 atm Kr-filled imploded CH shell targets were also measured for the use as broadband backlighters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron density dependence of intensity ratio for FeXXII extreme ultraviolet emission lines arising from different ground levels in electron beam ion trap and large helical device

Extreme ultraviolet (EUV) spectra of highly charged iron ions in a wavelength range of 100-300 A have been observed from two different plasma sources of the Tokyo Electron Beam Ion Trap (Tokyo-EBIT) with a monoenergetic electron beam and a Large Helical Device (LHD) with Maxwellian electron energy. The excitation process of the spectral lines is compared between the two plasmas, and it is found that the excitation process for Fe XIX - Fe XXII ions is clearly different. Namely, the EUV emission lines from the EBIT plasma are only dominated by electron impact excitation connected to the ground state, but the excitation mechanism is not so simple in the LHD plasma. The difference in the excitation process is studied by measuring the intensity ratio of EUV emission lines (114.412 A [1s{sup 2}2s2p{sup 2} {sup 2}P{sub 3/2}{yields}1s{sup 2}2s{sup 2}2p {sup 2}P{sub 3/2}]/117.144 A [1s{sup 2}2s2p{sup 2} {sup 2}P{sub 1/2}{yields}1s{sup 2}2s{sup 2}2p {sup 2}P{sub 1/2}]) arising from different ground levels in the Fe XXII ions. The line intensity ratio has an extremely small value of 0.2 in the EBIT plasma with a low beam current of 30 mA and a beam energy of 2 keV, while the ratio varies with the electron density n{sub e} in the LHD plasmas, i.e., 0.35 for n{sub e} = 1 x 10{sup 13} cm{sup -3} and 0.65 for n{sub e} = 4 x 10{sup 13} cm{sup -3}. Here, the electron density of the EBIT plasma is estimated to be smaller than 10{sup 12} cm{sup -3} and the electron temperature of the LHD plasmas is 2 keV. The dependence of the line intensity ratio on the observed electron density is analyzed for both the EBIT and the LHD plasmas using several collisional-radiative (CR) models. The present experimental data can easily be reproduced by the analysis when the thermal proton impact excitation is taken into account. The importance of the proton impact excitation is also experimentally verified by injecting an iron pellet into the LHD plasmas and changing the ratio of the proton density to the electron density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-speed digitization readout of silicon photomultipliers for time of flight positron emission tomography

We report on work to develop a system with about 100 picoseconds (ps) time resolution for time of flight positron emission tomography [TOF-PET]. The chosen photo detectors for the study were Silicon Photomultipliers (SiPM's). This study was based on extensive experience in studying timing properties of SiPM's. The readout of these devices used the commercial high speed digitizer DRS4. We applied different algorithms to get the best time resolution of 155 ps Guassian (sigma) for a LYSO crystal coupled to a SiPM. We consider the work as a first step in building a prototype TOF-PET module. The field of positron-emission-tomography (PET) has been rapidly developing. But there are significant limitations in how well current PET scanners can reconstruct images, related to how fast data can be acquired, how much volume they can image, and the spatial and temporal resolution of the generated photons. Typical modern scanners now include multiple rings of detectors, which can image a large volume of the patient. In this type of scanner, one can treat each ring as a separate detector and require coincidences only within the ring, or treat the entire region viewed by the scanner as a single 3 dimensional volume. This 3d technique has significantly better sensitivity since more photon pair trajectories are accepted. However, the scattering of photons within the volume of the patient, and the effect of random coincidences limits the technique. The advent of sub-nanosecond timing resolution detectors means that there is potentially much better rejection of scattered photon events and random coincidence events in the 3D technique. In addition, if the timing is good enough, then the origin of photons pairs can be determined better, resulting in improved spatial resolution - so called 'Time-of-Flight' PET, or TOF-PET. Currently a lot of activity has occurred in applications of SiPMs for TOF-PET. This is due to the devices very good time resolution, low profile, lack of high voltage needed, and their non-sensitivity to magnetic fields. While investigations into this technique have begun elsewhere, we feel that the extensive SiPM characterization and data acquisition expertise of Fermilab, and the historical in-depth research of PET imaging at University of Chicago will combine to make significant strides in this field. We also benefit by a working relationship with the SiPM producer STMicroelectronics (STM).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of silver K{alpha} and bremsstrahlung radiation from short-pulse laser-matter interactions with applications for x-ray radiography

Measurements of K{alpha} radiation yield and x-ray bremsstrahlung emission from thin-foil silver targets are presented. The targets were irradiated by a short pulse laser with intensities from 5x10{sup 16} to 10{sup 18} W/cm{sup 2} at 40 ps. Single hit charge-coupled device detectors, differential filter-stack detectors, and a crystal spectrometer were used to investigate the angular distribution of the K{alpha} and bremsstrahlung x-rays. This study is the first to use a broadband detector to estimate the absolute numbers of K{alpha} photons and to determine K{alpha} to bremsstrahlung ratios. The relevance of this work in the context of x-ray diffraction and x-ray radiography is discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Leaky ion extraction method for dielectronic recombination strength measurements at electron-beam ion traps

There are a number of mechanisms via which ions and electrons interact in a plasma, but by far one of the most important is through dielectronic recombination (DR). This is a resonant process through which an ion can capture a free electron and decrease its charge by one unit. Cross sections or strengths for this process are of vital importance in the modeling of hot plasmas and hence any advance in measurement or calculation procedures for obtaining DR data is of great importance. The work presented here examines the underlying basis of a newly developed method based on leaky mode ion extraction from an electron beam ion trap (EBIT), for relatively quickly obtaining DR strengths. The development attains to use the ratio of the leaked ions in adjacent charge states, i.e., the initial and final charge states of a DR process, to obtain the strengths preassuming that this ratio is the same as that of the ions remaining inside the EBIT trap. This work shows this assumption to be false. Hence DR strengths measured using leaked ions may be subject to error. But this work also reveals that the difference between this ratio and the one for trapped ions is insensitive to most of the experimental conditions, which means reliable DR strengths can still be obtained by leaky mode ion extraction if proper corrections are applied. An example is shown in this paper where after correction of some experimental results for DR strengths, obtained using the leaky mode, excellent agreement with corresponding theoretical calculations is obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗