Engineering topics

Chen, C. P.

Publications and source records attributed to Chen, C. P..

At least 55 records · Page 3

NASA NTRS1991

A novel gas-droplet numerical method for spray combustion

This paper presents a non-iterative numerical technique for computing time-dependent gas-droplet flows. The method is a fully-interacting combination of Eulerian fluid and Lagrangian particle calculation. The interaction calculations between the two phases are formulated on a pressure-velocity coupling procedure based on the operator-splitting technique. This procedure eliminates the global iterations required in the conventional particle-source-in-cell (PSIC) procedure. Turbulent dispersion calculations are treated by a stochastic procedure. Numerical calculations and comparisons with available experimental data, as well as efficiency assessments are given for some sprays typical of spray combustion applications.

Chen, C. P.↗

NASA NTRS1990

A non-isotropic multiple-scale turbulence model

A newly developed non-isotropic multiple scale turbulence model (MS/ASM) is described for complex flow calculations. This model focuses on the direct modeling of Reynolds stresses and utilizes split-spectrum concepts for modeling multiple scale effects in turbulence. Validation studies on free shear flows, rotating flows and recirculating flows show that the current model perform significantly better than the single scale k-epsilon model. The present model is relatively inexpensive in terms of CPU time which makes it suitable for broad engineering flow applications.

Chen, C. P.↗

NASA NTRS1990

Turbulence modulation effect on evaporating spray characterization

The effects of turbulence modulation on the evaporating spray characteristics of a liquid fuel jet are numerically investigated. Two modulation models are implemented into the k-epsilon two-equation model. The gas phase is solved by a pressure-based method on a Eulerian frame and droplets are solved by a stochastic discrete particle technique based on Lagrangian formulation. The k-epsilon models are used to characterize the time and length scales of the gas phase turbulence for droplet dispersions and droplet/turbulence interactions. The modulation models are found to have significant effects on gas phase dynamics, and are less important for the droplet dynamics. Numerical predictions are compared with the experimental data of Drallemier and Peters (1990).

Shang, H. M.↗

NASA NTRS1990

Multigrid solution of unsteady Navier-Stokes equations using a pressure method

A multigrid relaxation method is applied to a pressure-based implicit procedure to solve unseady, incompressible Navier-Stokes equations. The present multigrid method is a Correction Scheme according to Brandt. This method is used to solve the scalar matrices resulting from the finite-volume formulation and uses flux averaging as the restriction operator. The accuracy and computational efficiency are demonstrated with a steady state driven cavity flow and an unsteady flow over a circular cylinder case. The results are compared with single grid results using the OrthoMin conjugate gradient method and experimental data.

Jiang, Y.↗

NASA NTRS1990

Modeling of confined turbulent fluid-particle flows using Eulerian and Lagrangian schemes

Two important aspects of fluid-particulate interaction in dilute gas-particle turbulent flows (the turbulent particle dispersion and the turbulence modulation effects) are addressed, using the Eulerian and Lagrangian modeling approaches to describe the particulate phase. Gradient-diffusion approximations are employed in the Eulerian formulation, while a stochastic procedure is utilized to simulate turbulent dispersion in the Lagrangina formulation. The k-epsilon turbulence model is used to characterize the time and length scales of the continuous phase turbulence. Models proposed for both schemes are used to predict turbulent fully-developed gas-solid vertical pipe flow with reasonable accuracy.

Adeniji-Fashola, A.↗

NASA NTRS1990

Development of comprehensive numerical schemes for predicting evaporating gas-droplets flow processes of a liquid-fueled combustor

An existing Computational Fluid Dynamics code for simulating complex turbulent flows inside a liquid rocket combustion chamber was validated and further developed. The Advanced Rocket Injector/Combustor Code (ARICC) is simplified and validated against benchmark flow situations for laminar and turbulent flows. The numerical method used in ARICC Code is re-examined for incompressible flow calculations. For turbulent flows, both the subgrid and the two equation k-epsilon turbulence models are studied. Cases tested include idealized Burger's equation in complex geometries and boundaries, a laminar pipe flow, a high Reynolds number turbulent flow, and a confined coaxial jet with recirculations. The accuracy of the algorithm is examined by comparing the numerical results with the analytical solutions as well as experimented data with different grid sizes.

Chen, C. P.↗

NASA NTRS1989

Scaling and modeling of turbulent suspension flows

Scaling factors determining various aspects of particle-fluid interactions and the development of physical models to predict gas-solid turbulent suspension flow fields are discussed based on two-fluid, continua formulation. The modes of particle-fluid interactions are discussed based on the length and time scale ratio, which depends on the properties of the particles and the characteristics of the flow turbulence. For particle size smaller than or comparable with the Kolmogorov length scale and concentration low enough for neglecting direct particle-particle interaction, scaling rules can be established in various parameter ranges. The various particle-fluid interactions give rise to additional mechanisms which affect the fluid mechanics of the conveying gas phase. These extra mechanisms are incorporated into a turbulence modeling method based on the scaling rules. A multiple-scale two-phase turbulence model is developed, which gives reasonable predictions for dilute suspension flow. Much work still needs to be done to account for the poly-dispersed effects and the extension to dense suspension flows.

Chen, C. P.↗

NASA NTRS1989

Similarity solutions of jet flows using a multiple-scale turbulence model

An accurate finite difference scheme is used to study the performance of a newly developed multiple-scale turbulence model in the similarity region of plane/radial/round jet flows. Under the assumption that molecular viscosity can be neglected, the governing equations contain a hidden eigenvalue which corresponds to the sharp boundary of the flowfield. It is found that this eigenvalue is the locus of the free boundary separating the turbulent shear flow and the irrotational ambient fluid.

Chen, C. P.↗

NASA NTRS1989

3D computational analyses for SSME internal flows

Two qualities of the turbulent flow of hot gases in liquid fueled rocket engines that affect the selection and performance of turbulence models used in computational fluid analyses of the flow are curvature of the flow passages and rotation of the flow. Three configurations which represent these conditions and for which experimental data are available are subjected to three dimensional computational analyses using both the standard k - epsilon and a multiple-time-scale turbulence models. It is found that the multiple-time-scale model is better able to predict overall flow features, especially where regions of separated flow are present.

Chen, C. P.↗

NASA NTRS1988

Turbulence modeling of gas-solid suspension flows

The purpose here is to discuss and review advances in two-phase turbulent modeling techniques and their applications in various gas-solid suspension flow situations. In addition to the turbulence closures, heat transfer effect, particle dispersion and wall effects are partially covered.

Chen, C. P.↗

NASA NTRS1988

Analytical determination of critical crack size in solar cells

Although solar cells usually have chips and cracks, no material specifications concerning the allowable crack size on solar cells are available for quality assurance and engineering design usage. Any material specifications that the cell manufacturers use were developed for cosmetic reasons that have no technical basis. Therefore, the Applied Solar Energy Corporation (ASEC) has sponsored a continuing program for the fracture mechanics evaluation of GaAs. Fracture mechanics concepts were utilized to develop an analytical model that can predict the critical crack size of solar cells. This model indicates that the edge cracks of a solar cell are more critical than its surface cracks. In addition, the model suggests that the material specifications on the allowable crack size used for Si solar cells should not be applied to GaAs solar cells. The analytical model was applied to Si and GaAs solar cells, but it would also be applicable to the semiconductor wafers of other materials, such as a GaAs thin film on a Ge substrate, using appropriate input data.

Chen, C. P.↗

NASA NTRS1987

Comprehensive modeling of turbulent particulate flows using Eulerian and Lagrangian schemes

This paper addresses turbulent particle dispersion and modulation effects in dilute gas-particle turbulent flows using the Eulerian and Lagrangian modeling approaches. Gradient diffusion approximations are employed in the Eulerian formulation, while a stochastic procedure is utilized to simulate turbulent dispersion in the Lagrangian formulation. The k-epsilon turbulence model is used to characterize the time and length scales of the continuous phase turbulence. For the particle size and loading considered, the turbulence transport equations must be modified to account for the modulation effects. Models are proposed for both Eulerian and Lagrangian schemes. Comparisons and predictions are made in fully developed gas-solid pipe flow and confined coaxial jets laden with particles. For the monodispersed system investigated, Eulerian approach is less expensive and gives more consistent results than the Lagrangian approach. The Lagrangian technique should be further developed to eliminate current inherent inconsistencies especially with regard to the symmetry boundary condition.

Adeniji-Fashola, A.↗

NASA NTRS1987

Screening Mechanically-Defective Solar Cells

Flexure test eliminates failure-prone wafers before further processing. Probability of cracking of silicon solar cells substantially reduced by mechanical proof testing of silicon wafers before further processing, according to report. Report based on study demonstrating weak wafers eliminated by subjecting all wafers in manufacturing batch to biaxial-flexure test.

Chen, C. P.↗

NASA NTRS1987

Evaluation of GaAs Fracture Mechanics

Report provides data on fracture properties of single-crystal GaAs. Data required for design of reliable GaAs solar cells and modules. Aids design of solar cells.

Chen, C. P.↗

NASA NTRS1986

Multiple-scale turbulence model in confined swirling jet predictions

A recently developed multiple-scale turbulence model which attempts to circumvent the deficiencies of earlier models by taking nonequilibrium spectral energy transfer into account is presented. The model's validity is tested by predicting the confined swirling coaxial jet flow in a sudden expansion. It is noted that, in order to account for anisotropic turbulence, a full Reynolds stress model is required.

Chen, C. P.↗

NASA NTRS1986

Calculation of confined swirling jets

Computations of a confined coaxial swirling jet are carried out using a standard two-equation (k-epsilon) model and two modifications of this model based on Richardson-number corrections of the length-scale (epsilon) governing equation. To avoid any uncertainty involved in the setting up of inlet boundary conditions, actual measurements are used at the inlet plane of this calculation domain. The results of the numerical investigation indicate that the k-epsilon model is inadequate for the predictions of confined swirling flows. Although marginal improvement of the flow predictions can be achieved by these two corrections, neither can be judged satisfactory.

Chen, C. P.↗

NASA NTRS1986

Particle dispersion in confined turbulent swirling flows

This paper reports a numerical investigation of confined swirling flows of gas-particle mixtures. A recently developed two-fluid, multiple-scale mixing model is applied to study the influence of particles on the intensity of the reverse flows of the gas phase and the effects of swirl on the particle dispersion in an annular expanding chamber under isothermal condition. The calculations were made for different swirl strength of injection of the annular jet into the mixing chamber. Results agree well qualitatively with experimental information available. It is also found that the calculated flow fields depend heavily on the prescription of the inlet flow conditions.

Chen, C. P.↗

NASA NTRS1986

Crack Growth in Single-Crystal Silicon

Report describes experiments on crack growth in single-crystal silicon at room temperature in air. Crack growth in (111) cleavage plane of wafers, 50 by 100 by 0.76 mm in dimension, cut from Czochralski singlecrystal silicon studied by double-torsion load-relaxation method and by acoustic-emission measurements. Scanning electron microscopy and X-ray topography also employed. Results aid in design and fabrication of silicon photovoltaic and microelectronic devices.

Chen, C. P.↗