Engineering Papers⌕ Search

Engineering topics

Calise, Anthony J.

Publications and source records attributed to Calise, Anthony J..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Matched asymptotic expansion of the Hamilton-Jacobi-Bellman equation for aeroassisted plane-change maneuvers

In this paper we develop a general procedure for constructing a matched asymptotic expansion of the Hamilton-Jacobi-Bellman equation based on the method of characteristics. The development is for a class of perturbation problems whose solution exhibits two-time-scale behavior. A regular expansion for problems of this type is inappropriate since it is not uniformly valid over a narrow range of the independent variable. Of particular interest here is the manner in which matching and boundary conditions are enforced when the expansion is carried out to first order. Two cases are distinguished - one where the left boundary condition coincides with or lies to the right of the singular region and one where the left boundary condition lies to the left of the singular region. A simple example is used to illustrate the procedure, and its potential application to aeroassisted plane change is described.

Calise, Anthony J.↗
NASA NTRS1993

Robust control of hypersonic vehicles considering propulsive and aeroelastic effects

The influence of propulsion system variations and elastic fuselage behavior on the flight control system of an airbreathing hypersonic vehicle is investigated. Thrust vector magnitude and direction changes due to angle of attack variations affect the pitching moment. Low structural vibration frequencies may occur close to the rigid body modes influencing the angle of attack and lead to possible cross coupling. These effects are modeled as uncertainties in the context of a robust control study of a hypersonic vehicle model accelerating through Mach 8 using H-infinity and mu synthesis techniques. Various levels of uncertainty are introduced into the system. Both individual and simultaneous appearance of uncertainty are considered. The results indicate that the chosen design technique is suitable for this kind of problem provided that a fairly good knowledge of the effects mentioned above is available. The order of the designed controller is reduced but robust performance is lost which shows the need for fixed order design techniques.

Buschek, Harald↗
NASA NTRS1992

Finite element method for optimal guidance of an advanced launch vehicle

A temporal finite element based on a mixed form of Hamilton's weak principle is summarized for optimal control problems. The resulting weak Hamiltonian finite element method is extended to allow for discontinuities in the states and/or discontinuities in the system equations. An extension of the formulation to allow for control inequality constraints is also presented. The formulation does not require element quadrature, and it produces a sparse system of nonlinear algebraic equations. To evaluate its feasibility for real-time guidance applications, this approach is applied to the trajectory optimization of a four-state, two-stage model with inequality constraints for an advanced launch vehicle. Numerical results for this model are presented and compared to results from a multiple-shooting code. The results show the accuracy and computational efficiency of the finite element method.

Hodges, Dewey H.↗
NASA NTRS1992

A hybrid approach to near-optimal launch vehicle guidance

This paper evaluates a proposed hybrid analytical/numerical approach to launch-vehicle guidance for ascent to orbit injection. The feedback-guidance approach is based on a piecewise nearly analytic zero-order solution evaluated using a collocation method. The zero-order solution is then improved through a regular perturbation analysis, wherein the neglected dynamics are corrected in the first-order term. For real-time implementation, the guidance approach requires solving a set of small dimension nonlinear algebraic equations and performing quadrature. Assessment of performance and reliability are carried out through closed-loop simulation for a vertically launched 2-stage heavy-lift capacity vehicle to a low earth orbit. The solutions are compared with optimal solutions generated from a multiple shooting code. In the example the guidance approach delivers over 99.9 percent of optimal performance and terminal constraint accuracy.

Leung, Martin S. K.↗
NASA NTRS1991

Optimal guidance law development for an advanced launch system

The proposed investigation on a Matched Asymptotic Expansion (MAE) method was carried out. It was concluded that the method of MAE is not applicable to launch vehicle ascent trajectory optimization due to a lack of a suitable stretched variable. More work was done on the earlier regular perturbation approach using a piecewise analytic zeroth order solution to generate a more accurate approximation. In the meantime, a singular perturbation approach using manifold theory is also under current investigation. Work on a general computational environment based on the use of MACSYMA and the weak Hamiltonian finite element method continued during this period. This methodology is capable of the solution of a large class of optimal control problems.

Calise, Anthony J.↗
NASA NTRS1990

Optimal guidance law development for an advanced launch system

A regular perturbation analysis is presented. Closed-loop simulations were performed with a first order correction including all of the atmospheric terms. In addition, a method was developed for independently checking the accuracy of the analysis and the rather extensive programming required to implement the complete first order correction with all of the aerodynamic effects included. This amounted to developing an equivalent Hamiltonian computed from the first order analysis. A second order correction was also completed for the neglected spherical Earth and back-pressure effects. Finally, an analysis was begun on a method for dealing with control inequality constraints. The results on including higher order corrections do show some improvement for this application; however, it is not known at this stage if significant improvement will result when the aerodynamic forces are included. The weak formulation for solving optimal problems was extended in order to account for state inequality constraints. The formulation was tested on three example problems and numerical results were compared to the exact solutions. Development of a general purpose computational environment for the solution of a large class of optimal control problems is under way. An example, along with the necessary input and the output, is given.

Calise, Anthony J.↗
NASA NTRS1990

Singular perturbation analysis of AOTV-related trajectory optimization problems

The problem of real time guidance and optimal control of Aeroassisted Orbit Transfer Vehicles (AOTV's) was addressed using singular perturbation theory as an underlying method of analysis. Trajectories were optimized with the objective of minimum energy expenditure in the atmospheric phase of the maneuver. Two major problem areas were addressed: optimal reentry, and synergetic plane change with aeroglide. For the reentry problem, several reduced order models were analyzed with the objective of optimal changes in heading with minimum energy loss. It was demonstrated that a further model order reduction to a single state model is possible through the application of singular perturbation theory. The optimal solution for the reduced problem defines an optimal altitude profile dependent on the current energy level of the vehicle. A separate boundary layer analysis is used to account for altitude and flight path angle dynamics, and to obtain lift and bank angle control solutions. By considering alternative approximations to solve the boundary layer problem, three guidance laws were derived, each having an analytic feedback form. The guidance laws were evaluated using a Maneuvering Reentry Research Vehicle model and all three laws were found to be near optimal. For the problem of synergetic plane change with aeroglide, a difficult terminal boundary layer control problem arises which to date is found to be analytically intractable. Thus a predictive/corrective solution was developed to satisfy the terminal constraints on altitude and flight path angle. A composite guidance solution was obtained by combining the optimal reentry solution with the predictive/corrective guidance method. Numerical comparisons with the corresponding optimal trajectory solutions show that the resulting performance is very close to optimal. An attempt was made to obtain numerically optimized trajectories for the case where heating rate is constrained. A first order state variable inequality constraint was imposed on the full order AOTV point mass equations of motion, using a simple aerodynamic heating rate model.

Calise, Anthony J.↗
NASA NTRS1990

A comparison of time-optimal interception trajectories for the F-8 and F-15

The simulation results of a real time control algorithm for onboard computation of time-optimal intercept trajectories for the F-8 and F-15 aircraft are given. Due to the inherent aerodynamic and propulsion differences in the aircraft, there are major differences in their optimal trajectories. The significant difference in the two aircrafts are their flight envelopes. The F-8's optimal cruise velocity is thrust limited, while the F-15's optimal cruise velocity is at the intersection of the Mach and dynamic pressure constraint boundaries. This inherent difference necessitated the development of a proportional thrust controller for use as the F-15 approaches it's optimal cruise energy. Documented here is the application of singular perturbation theory to the trajectory optimization problem, along with a summary of the control algorithms. Numerical results for the two aircraft are compared to illustrate the performance of the minimum time algorithm, and to compute the resulting flight paths.

Calise, Anthony J.↗
NASA NTRS1990

An approach to optimal guidance of an advanced launch vehicle concept

An approximate solution for the maximum payload trajectory of a two-stage launch vehicle using a regular perturbation technique is presented. A zero-order solution for a two-stage vehicle based on a flat-earth approximation and negligible atmospheric effects is obtained in closed form. High-order correction terms are obtained from the solution of nonhomogeneous, first-order linear differential equations by quadrature. This promises the capability for an onboard optimal guidance law implementation.

Leung, Martin S.↗
NASA NTRS1989

A finite element based method for solution of optimal control problems

A temporal finite element based on a mixed form of the Hamiltonian weak principle is presented for optimal control problems. The mixed form of this principle contains both states and costates as primary variables that are expanded in terms of elemental values and simple shape functions. Unlike other variational approaches to optimal control problems, however, time derivatives of the states and costates do not appear in the governing variational equation. Instead, the only quantities whose time derivatives appear therein are virtual states and virtual costates. Also noteworthy among characteristics of the finite element formulation is the fact that in the algebraic equations which contain costates, they appear linearly. Thus, the remaining equations can be solved iteratively without initial guesses for the costates; this reduces the size of the problem by about a factor of two. Numerical results are presented herein for an elementary trajectory optimization problem which show very good agreement with the exact solution along with excellent computational efficiency and self-starting capability. The goal is to evaluate the feasibility of this approach for real-time guidance applications. To this end, a simplified two-stage, four-state model for an advanced launch vehicle application is presented which is suitable for finite element solution.

Bless, Robert R.↗
NASA NTRS1989

Robust fixed order dynamic compensation for large space structure control

A simple formulation for designing fixed order dynamic compensators which are robust to both uncertainty at the plant input and structured uncertainty in the plant dynamics is presented. The emphasis is on designing low order compensators for systems of high order. The formulation is done in an output feedback setting which exploits an observer canonical form to represent the compensator dynamics. The formulation also precludes the use of direct feedback of the plant output. The main contribution lies in defining a method for penalizing the states of the plant and of the compensator, and for choosing the distribution on initial conditions so that the loop transfer matrix approximates that of a full state design. To improve robustness to parameter uncertainty, the formulation avoids the introduction of sensitivity states, which has led to complex formulations in earlier studies where only structured uncertainty has been considered.

Calise, Anthony J.↗
NASA NTRS1989

A weak Hamiltonian finite element method for optimal guidance of an advanced launch vehicle

A temporal finite-element method based on a mixed form of the Hamiltonian weak principle is presented for optimal control problems. The mixed form of this principle contains both states and costates as primary variables, which are expanded in terms of nodal values and simple shape functions. Time derivatives of the states and costates do not appear in the governing variational equation; the only quantities whose time derivatives appear therein are virtual states and virtual costates. Numerical results are presented for an elementary trajectory optimization problem; they show very good agreement with the exact solution along with excellent computational efficiency and self-starting capability. The feasibility of this approach for real-time guidance applications is evaluated. A simplified model for an advanced launch vehicle application that is suitable for finite-element solution is presented.

Hodges, Dewey H.↗
NASA NTRS1989

Two-time scale stabilization of a flexible arm with output feedback

An approach is presented to designing a control system with output feedback for a lightweight flexible arm. A two-time-scale dynamic model is obtained which allows the adoption of a composite control strategy. First a slow control can be designed for the slow (rigid) subsystem, and then a fast stabilizing control for the fast (flexible) subsystem. The problem of the lack of full state measurements connected with the fast control design is solved. An output-feedback, low-order dynamic compensator whose optimal gains are computed by a convergent numerical algorithm is designed. A more robust design can be achieved if a loop transfer recovery procedure is introduced. The design procedure is tested by means of nonlinear simulation, and the results are discussed.

Siciliano, Bruno↗
NASA NTRS1988

Near-optimal output feedback regulation of ill-conditioned linear systems

A two-time scale approximation for the linear quadratic optimal output feedback regulator program is examined. Necessary conditions for optimality, as well as an algorithm for computing locally near-optimal gains are derived. If it is assumed that the slow and fast subsystem initial conditions are uniformly distributed, optimal gains for the two-time-scale problem provide a second-order approximation to optimal closed-loop performance in the unperturbed system. This is verified with a numerical example.

Moerder, Daniel D.↗
NASA NTRS1988

Research on output feedback control

A summary is presented of the main results obtained during the course of research on output feedback control. The term output feedback is used to denote a controller design approach which does not rely on an observer to estimate the states of the system. Thus, the order of the controller is fixed, and can even be zero order, which amounts to constant gain ouput feedback. The emphasis has been on optimal output feedback. That is, a fixed order controller is designed based on minimizing a suitably chosen quadratic performance index. A number of problem areas that arise in this context have been addressed. These include developing suitable methods for selecting an index of performance, both time domain and frequency domain methods for achieving robustness of the closed loop system, developing canonical forms to achieve a minimal parameterization for the controller, two time scale design formulations for ill-conditioned systems, and the development of convergent numerical algorithms for solving the output feedback problem.

Calise, Anthony J.↗