Engineering topics

Bushnell, Dennis M.

Publications and source records attributed to Bushnell, Dennis M..

116 records · Page 7

NASA NTRS1990

Viscous drag reduction in boundary layers

The present volume discusses the development status of stability theory for laminar flow control design, applied aspects of laminar-flow technology, transition delays using compliant walls, the application of CFD to skin friction drag-reduction, active-wave control of boundary-layer transitions, and such passive turbulent-drag reduction methods as outer-layer manipulators and complex-curvature concepts. Also treated are such active turbulent drag-reduction technique applications as those pertinent to MHD flow drag reduction, as well as drag reduction in liquid boundary layers by gas injection, drag reduction by means of polymers and surfactants, drag reduction by particle addition, viscous drag reduction via surface mass injection, and interactive wall-turbulence control.

Bushnell, Dennis M.↗

NASA NTRS1990

Viscous drag reduction via surface mass injection

Slot injection systems on the surfaces of aerodynamic bodies have been noted to consistently furnish substantial local skin friction reductions which are predictable on the basis of current numerical methods. Only crude systems studies, however, have been thus far completed. The most common configuration for slot ingestion in the literature involves tangential injection of air along a two-dimensional surface on which air constitutes the mainstream flow; attention is presently given to slot injection in low-speed and high-speed flows, as well as a discussion of aircraft applications and an evaluation of prospective possibilities for practical drag-reduction systems.

Hefner, Jerry N.↗

NASA NTRS1989

Hydrodynamic skin-friction reduction

A process for reducing skin friction, inhibiting the effects of liquid turbulence, and decreasing heat transfer in a system involving flow of a liquid along a surface of a body includes applying a substantially integral sheet of a gas, e.g., air, immediately adjacent to the surface of the body; a marine vehicle, which has a longitudinally grooved surface in proximity with the liquid and with a surface material having high contact angle between the liquid and said wall to reduce interaction of the liquid; water, with the surface of the body; and the hull of the marine vehicle.

Reed, Jason C.↗

NASA NTRS1989

Experimental study of free-shear layer transition above a cavity at Mach 3.5

The transition behavior of a free-shear layer above a cavity with high and low levels of freestream acoustic disturbances has been studied at Mach 3.5. Optical techniques, mean pitot pressure measurements, and hot-wire measurements were employed to detect transition locations. Transition Reynolds numbers of between 363,000 and 530,000 were found, in agreement with previous results. It is suggested that upstream convected disturbances may be at least partially responsible for the insensitivity of transition Reynolds numbers to the freestream acoustic disturbance field.

King, Rudolph A.↗

NASA NTRS1989

Turbulence control in wall flows

Most of the detailed turbulence-structure data available pertain only to the simplest cases, involving zero pressure-gradient boundary layers and free-shear layers, and indicate that each disparate geometry possesses its own set of dominant nonlinear instabilities. Various boundary/input conditions act to modify these instabilities for low input levels; for stronger inputs, the basic instability modes/structures sustaining the turbulence field may be altered. Steady-state inputs are noted to be extremely effective in altering turbulence structures, in the directions of either amplification or diminution.

Bushnell, Dennis M.↗

NASA NTRS1988

The fix for tough spots

Modern turbulence-control techniques are discussed. Particular atention is given to retrofit techniques such as riblets and large-eddy breakup (LEBU) devices which use passive elements suitable for a variety of existing vehicles with minimum added complexity. Riblets are small flow-aligned grooves in the aircraft skin that damp turbulence and reduce skin friction; the mechanism of riblet drag reduction derives from the enhancement of turbulence-altering, transverse viscous forces by strong spanwise surface geometry gradients. LEBUs are thin plates or ribbons suspended in a turbulent boundary layer to sever or break up the large vortices that form the convoluted outer edge of the layer. Other turbulence-control techniques are discussed, including one that involves the injection of control vortices into the turbulent boundary layer to modify or substitute for large-eddy structures.

Anders, John B.↗

NASA NTRS1987

Sensitivity of LFC techniques in the non-linear regime

For all the Laminar Flow Control (LFC) techniques examined, finite-amplitude effects are destabilizing, i.e., finite-amplitude 2-D Tollmien-Schlichting (TS) waves grow faster than predicted by linear theory. It was also found, in direct contrast to the results from linear theory for low-amplitude waves, that temperature fluctuations exert a further destabilizing influence on finite amplitude 2-D TS waves. The controlled boundary layers are, of course, subject to intense 3-D secondary instabilities. The instantaneous growth rates of both the fundamental and subharmonic instabilities are strongly tied to the amplitude of the primary 2-D wave. The principal finite-amplitude effects upon the 3-D secondary instabilities occur through the faster growth of the 2-D waves.

Bushnell, Dennis M.↗

NASA NTRS1987

Supersonic laminar-flow control

Detailed, up to date systems studies of the application of laminar flow control (LFC) to various supersonic missions and/or vehicles, both civilian and military, are not yet available. However, various first order looks at the benefits are summarized. The bottom line is that laminar flow control may allow development of a viable second generation SST. This follows from a combination of reduced fuel, structure, and insulation weight permitting operation at higher altitudes, thereby lowering sonic boom along with improving performance. The long stage lengths associated with the emerging economic importance of the Pacific Basin are creating a serious and renewed requirement for such a vehicle. Supersonic LFC techniques are discussed.

Bushnell, Dennis M.↗