Engineering Papers⌕ Search

Engineering topics

Bross, A.

Publications and source records attributed to Bross, A..

At least 55 records · Page 3

Tevatron combination of single-top-quark cross sections and determination of the magnitude of the Cabibbo-Kobayashi-Maskawa matrix element $\bf V_{tb}$

In this study, we present the final combination of CDF and D0 measurements of cross sections for single-top-quark production in proton-antiproton collisions at a center-of-mass energy of 1.96 TeV. The data correspond to total integrated luminosities of up to 9.7 fb -1 per experiment. The t-channel cross section is measured to be σ t = 2.25$+0.29\atop{-0.31}$ pb. We also present the combinations of the two-dimensional measurements of the s- vs t-channel cross section. In addition, we give the combination of the s+t channel cross section measurement resulting in σ s+t = 3.30$+0.52\atop{-0.40}$ pb, without assuming the standard model value for the ratio σ s /σ t . The resulting value of the magnitude of the top-to-bottom quark coupling is |V tb |= 1.02$+0.06\atop{-0.05}$, corresponding to |V tb | > 0.92 at the 95% C.L.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Simultaneous measurement of forward-backward asymmetry and top polarization in dilepton final states from $t\bar t$ production at the Tevatron

We present a simultaneous measurement of the forward-backward asymmetry and the top-quark polarization in tt¯ production in dilepton final states using 9.7 fb –1 of proton-antiproton collisions at √s=1.96 TeV with the D0 detector. To reconstruct the distributions of kinematic observables we employ a matrix element technique that calculates the likelihood of the possible tt¯ kinematic configurations. After accounting for the presence of background events and for calibration effects, we obtain a forward-backward asymmetry of A tt¯ =(15.0±6.4(stat)±4.9(syst))% and a top-quark polarization times spin analyzing power in the beam basis of κP=(7.2±10.5(stat)±4.2(syst))%, with a correlation of –56% between the measurements. If we constrain the forward-backward asymmetry to its expected standard model value, we obtain a measurement of the top polarization of κP=(11.3±9.1(stat)±1.9(syst))%. If we constrain the top polarization to its expected standard model value, we measure a forward-backward asymmetry of A tt¯ =(17.5±5.6(stat)±3.1(syst))%. A combination with the D0 A tt¯ measurement in the lepton+jets final state yields an asymmetry of Att¯=(11.8±2.5(stat)±1.3(syst))%. Within their respective uncertainties, all these results are consistent with the standard model expectations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Design and Simulation of the nuSTORM Pion Beamline

The nuSTORM (neutrinos from STORed Muons) proposal presents a detailed design for a neutrino facility based on a muon storage ring, with muon decay in the production straight section of the ring providing well defined neutrino beams. The facility includes a primary high-energy proton beam line, a target station with pion production and collection, and a pion beamline for pion transportation and injection into a muon decay ring. The nuSTORM design uses “stochastic injection”, in which pions are directed by a chicane, referred to as the Orbit Combination Section (OCS), into the production straight section of the storage ring. Pions that decay within that straight section provide muons within the circulating acceptance of the ring. Furthermore, the design enables injection without kickers or a separate pion decay transport line. The beam line that the pions traverse before being extracted from the decay ring is referred to as the pion beamline. Our paper describes the design and simulation of the pion beamline, and includes full beam dynamics simulations of the system.

43 PARTICLE ACCELERATORS↗

Measurement of the Effective Weak Mixing Angle in p p ¯ → Z / γ * → e + e - Events

We present a measurement of the fundamental parameter of the standard model, the weak mixing angle sin 2 θ ℓ eff which determines the relative strength of weak and electromagnetic interactions, in pp¯→Z/γ*→e + e - events at a center of mass energy of 1.96 TeV, using data corresponding to 9.7 fb -1 of integrated luminosity collected by the D0 detector at the Fermilab Tevatron. The effective weak mixing angle is extracted from the forward-backward charge asymmetry as a function of the invariant mass around the Z boson pole. The measured value of sin 2 θ ℓ eff =0.23147±0.00047 is the most precise measurement from light quark interactions to date, with a precision close to the best LEP and SLD results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optimization of the magnetic horn for the nuSTORM non-conventional neutrino beam using the genetic algorithm

This paper describes the strategy for optimizing the magnetic horn for the neutrinos from STORed Muons (nuSTORM) facility. The nuSTORM magnetic horn is the primary collection device for the secondary particles generated by bombarding a solid target with 120 GeV protons. As a consequence of the non-conventional beamline designed for nuSTORM, the requirements on the horn are different from those for a conventional neutrino beamline. At nuSTORM, muons decay while circulating in the storage ring, and the detectors are placed downstream of the production straight so as to be exposed to the neutrinos from muon decay. nuSTORM aims at precisely measuring the neutrino cross sections, and providing a definitive statement about the existence of sterile neutrinos. The nuSTORM horn aims at focusing the pions into a certain phase space so that more muons from pion decay can be accepted by the decay ring. The paper demonstrates a numerical method that was developed to optimize the horn design to gain higher neutrino flux from the circulating muons. A Genetic Algorithm (GA) was applied to the simultaneous optimization of the two objectives in this study. In conclusion, the application of the technique discussed in this paper is not limited to either the nuSTORM facility or muon based facilities, but can be used for other neutrino facilities that use magnetic horns as collection devices.

43 PARTICLE ACCELERATORS↗

Partial return yoke for MICE step IV and final step

This paper reports on the progress of the design and construction of a retro-fitted return yoke for the international Muon Ionization Cooling Experiment (MICE). MICE is a proof-of-principle experiment aiming to demonstrate ionization cooling experimentally. In earlier studies we outlined how a partial return yoke can be used to mitigate stray magnetic field in the experimental hall; we report on the progress of the construction of the partial return yoke for MICE Step IV. We also discuss an extension of the Partial Return Yoke for the final step of MICE; we show simulation results of the expected performance.

43 PARTICLE ACCELERATORS↗

Design Concepts for Muon-Based Accelerators

Muon-based accelerators have the potential to enable facilities at both the Intensity and the Energy Frontiers. Muon storage rings can serve as high precision neutrino sources, and a muon collider is an ideal technology for a TeV or multi-TeV collider. Progress in muon accelerator designs has advanced steadily in recent years. In regard to 6D muon cooling, detailed and realistic designs now exist that provide more than 5 order-of-magnitude emittance reduction. Furthermore, detector performance studies indicate that with suitable pixelation and timing resolution, backgrounds in the collider detectors can be significantly reduced thus enabling high quality physics results. Thanks to these and other advances in design & simulation of muon systems, technology development, and systems demonstrations, muon storage-ring-based neutrino sources and a muon collider appear more feasible than ever before. A muon collider is now arguably among the most compelling approaches to a multi-TeV lepton collider. This paper summarizes the current status of design concepts for muon-based accelerators for neutrino factories and a muon collider.

Bogacz, Slawomir↗

Design Concepts for Muon-Based Accelerators

Muon-based accelerators have the potential to enable facilities at both the Intensity and the Energy Frontiers. Muon storage rings can serve as high precision neutrino sources, and a muon collider is an ideal technology for a TeV or multi-TeV collider. Progress in muon accelerator designs has advanced steadily in recent years. In regard to 6D muon cooling, detailed and realistic designs now exist that provide more than 5 order-of-magnitude emittance reduction. Furthermore, detector performance studies indicate that with suitable pixelation and timing resolution, backgrounds in the collider detectors can be significantly reduced, thus enabling high-quality physics results. Thanks to these and other advances in design & simulation of muon systems, technology development, and systems demonstrations, muon storage-ring-based neutrino sources and a muon collider appear more feasible than ever before. A muon collider is now arguably among the most compelling approaches to a multi-TeV lepton collider. This paper summarizes the current status of design concepts for muon-based accelerators for neutrino factories and a muon collider.

43 PARTICLE ACCELERATORS↗

Measurement of the ratio of inclusive cross sections $\sigma (p\bar{p} \rightarrow Z+2~b~\text{jets}) / \sigma (p\bar{p} \rightarrow Z+ \text{2 jets})$ in $p\bar{p}$ collisions at $\sqrt s=1.96$ TeV

In this study, we measure the ratio of cross sections, σ(pp¯ → Z + 2 b jets)/σ(pp¯ → Z + 2 jets), for associated production of a Z boson with at least two jets with transverse momentum p jet T > 20 GeV and pseudorapidity |η jet | < 2.5. This measurement uses data corresponding to an integrated luminosity of 9.7 fb –1 collected by the D0 experiment in Run II of Fermilab’s Tevatron pp¯ Collider at a center-of-mass energy of 1.96 TeV. The measured integrated ratio of 0.0236 ± 0.0032(stat) ± 0.0035(syst) is in agreement with predictions from next-to-leading-order perturbative QCD and the Monte Carlo event generators PYTHIA and ALPGEN .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the $B_s^0$ Lifetime in the Flavor-Specific Decay Channel $B_s^0 \to D_s^- \mu^+\nu X$

We present an updated measurement of the B s 0 lifetime using the semileptonic decays B s 0 → D s - μ + ν X , with D s - → ϕ π - and ϕ → K + K - (and the charge conjugate process). This measurement uses the full Tevatron Run II sample of proton-antiproton collisions at s = 1.96 TeV , comprising an integrated luminosity of 10.4 fb − 1 . We find a flavor-specific lifetime τ fs ( B s 0 ) = 1.479 ± 0.010 ( stat ) ± 0.021 ( syst ) ps . This technique is also used to determine the B 0 lifetime using the analogous B 0 → D - μ + ν X decay with D - → ϕ π - and ϕ → K + K - , yielding τ ( B 0 ) = 1.534 ± 0.019 ( stat ) ± 0.021 ( syst ) ps . Both measurements are consistent with the current world averages, and the B s 0 lifetime measurement is one of the most precise to date. Taking advantage of the cancellation of systematic uncertainties, we determine the lifetime ratio τ fs ( B s 0 ) / τ ( B 0 ) = 0.964 ± 0.013 ( stat ) ± 0.007 ( syst ) .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutrino factory

The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that theta(13) > 0. The measured value of theta(13) is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable of making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (anti) neutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EURO nu. Design Study consortium. EURO nu coordinated the European contributions to the International Design Study for the Neutrino Factory (the IDS-NF) collaboration. The EURO nu baseline accelerator facility will provide 10(21) muon decays per year from 12.6 GeV stored muon beams serving a single neutrino detector situated at a source-detector distance of between 1 500 km and 2 500 km. A suite of near detectors will allow definitive neutrino-scattering experiments to be performed.

43 PARTICLE ACCELERATORS↗

Measurement of the direct C P -violating parameter A C P in the decay D + → K - π + π +

We measure the direct C P -violating parameter A C P for the decay of the charged charm meson, D + → K - π + π + (and charge conjugate), using the full 10.4 fb - 1 sample of p p ¯ collisions at s = 1.96 TeV collected by the D0 detector at the Fermilab Tevatron collider. We extract the raw reconstructed charge asymmetry by fitting the invariant mass distributions for the sum and difference of charge-specific samples. This quantity is then corrected for detector-related asymmetries using data-driven methods and for possible physics asymmetries (from B → D processes) using input from Monte Carlo simulation. We measure A C P = [ - 0.16 ± 0.15 ( stat ) ± 0.09 ( syst ) ] % , which is consistent with zero, as expected from the standard model prediction of C P conservation, and is the most precise measurement of this quantity to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗