Engineering Papers⌕ Search

Engineering topics

Bross, A.

Publications and source records attributed to Bross, A..

At least 37 records · Page 2

A FODO racetrack ring for nuSTORM: design and optimization

Here, the goal of nuSTORM is to provide well-defined neutrino beams for precise measurements of neutrino cross-sections and oscillations. The nuSTORM decay ring is a compact racetrack storage ring with a circumference of ~ 480 m that incorporates large aperture (60 cm diameter) magnets. There are many challenges in the design. In order to incorporate the Orbit Combination section (OCS), used for injecting the pion beam into the ring, a dispersion suppressor is needed adjacent to the OCS . Concurrently, in order to maximize the number of useful muon decays, strong bending dipoles are needed in the arcs to minimize the arc length. These dipoles create strong chromatic effects, which need to be corrected by nonlinear sextupole elements in the ring. In this paper, a FODO racetrack ring design and its optimization using sextupolar fields via both a Genetic Algorithm (GA) and a Simulated Annealing (SA) algorithm will be discussed.

43 PARTICLE ACCELERATORS↗

Combination of D0 measurements of the top quark mass

We present a combination of measurements of the top quark mass by the D0 experiment in the lepton+jets and dilepton channels. We use all the data collected in Run I (1992–1996) at s=1.8 TeV and Run II (2001–2011) at s=1.96 TeV of the Tevatron pp¯ collider, corresponding to integrated luminosities of 0.1 fb-1 and 9.7 fb-1, respectively. The combined result is: mt=174.95±0.40(stat)±0.64(syst) GeV=174.95±0.75 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the direct CP violating charge asymmetry in $B^\pm \rightarrow \mu^\pm \nu_\mu D^{0}$ decays

We present the first measurement of the CP violating charge asymmetry in B±→μ±νμD0 decays using the full Run II integrated luminosity of 10.4 fb-1 in proton-antiproton collisions collected with the D0 detector at the Fermilab Tevatron Collider. We measure a difference in the yield of B- and B+ mesons in these decays by fitting the reconstructed invariant mass distributions. This results in an asymmetry of AμD0=[-0.14±0.20]%, which is consistent with standard model predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of top quark polarization in t t ¯ lepton + jets final states

We present a measurement of top quark polarization in t ¯ t pair production in p ¯ p collisions at √ s = 1.96 TeV using data corresponding to 9.7 fb -1 of integrated luminosity recorded with the D0 detector at the Fermilab Tevatron Collider. We consider final states containing a lepton and at least three jets. The polarization is measured through the distribution of lepton angles along three axes: the beam axis, the helicity axis, and the transverse axis normal to the t ¯ t production plane. This is the first measurement of top quark polarization at the Tevatron using lepton + jet final states and the first measurement of the transverse polarization in t ¯ t production. The observed distributions are consistent with standard model predictions of nearly no polarization.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the Inclusive $t\bar{t}$ Production Cross Section in $p\bar{p}$ Collisions at $\sqrt{s}=1.96$ TeV and Determination of the Top Quark Pole Mass

The inclusive cross section of top quark-antiquark pairs produced in pp¯ collisions at s=1.96 TeV is measured in the lepton+jets and dilepton decay channels. The data sample corresponds to 9.7 fb-1 of integrated luminosity recorded with the D0 detector during Run II of the Fermilab Tevatron Collider. Employing multivariate analysis techniques we measure the cross section in the two decay channels and we perform a combined cross section measurement. For a top quark mass of 172.5 GeV, we measure a combined inclusive top quark-antiquark pair production cross section of σtt¯=7.26±0.13(stat)-0.50+0.57(syst) pb which is consistent with standard model predictions. We also perform a likelihood fit to the measured and predicted top quark mass dependence of the inclusive cross section, which yields a measurement of the pole mass of the top quark. The extracted value is mt=172.8±1.1(theo)-3.1+3.3(exp) GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evidence for a $B_s^0 \pi^\pm$ state

We report evidence for a narrow structure, X(5568), in the decay sequence X(5568)→Bs0π±, Bs0→J/ψϕ, J/ψ→μ+μ-, ϕ→K+K-. This is evidence for the first instance of a hadronic state with valence quarks of four different flavors. The mass and natural width of this state are measured to be m=5567.8±2.9(stat)-1.9+0.9(syst) MeV/c2 and Γ=21.9±6.4(stat)-2.5+5.0(syst) MeV/c2. If the decay is X(5568)→Bs*π±→Bs0γπ± with an unseen γ, m(X(5568)) will be shifted up by m(Bs*)-m(Bs0)∼49 MeV/c2. This measurement is based on 10.4 fb−1 of pp¯ collision data at s=1.96 TeV collected by the D0 experiment at the Fermilab Tevatron collider.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

$B^{0}_{s}$ lifetime measurement in the CP-odd decay channel $B^{0}_{s} \to J/\psi f_{0}(980)$

The lifetime of the Bs0 meson is measured in the decay channel Bs0→J/ψπ+π- with 880≤Mπ+π-≤1080 MeV/c2, which is mainly a CP-odd state and dominated by the f0(980) resonance. In 10.4 fb-1 of data collected with the D0 detector in Run II of the Tevatron, the lifetime of the Bs0 meson is measured to be τ(Bs0)=1.70±0.14(stat)±0.05(syst) ps. Neglecting CP violation in Bs0/B¯s0 mixing, the measurement can be translated into the width of the heavy mass eigenstate of the Bs0, ΓH=0.59±0.05(stat)±0.02(syst) ps-1.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutrinos from PIon Beam Line, nuPIL

LBNF-DUNE (Long Baseline Neutrino Facilities - Deep Underground Neutrino Experiment) is a project based at Fermilab to study neutrino oscillations. The current baseline regarding the neutrino production considers the conventional approach: a high energy proton beam hits a target, producing pions that are collected by a horn and that decay in a decay pipe. An alternative solution, called nuPIL (neutrinos from a Pion beam Line) consists of using a beam line to guide the pions to clean the beam and to put instrumentation to monitor it. This paper presents the concept and the first preliminary results.

43 PARTICLE ACCELERATORS↗

Study of double parton interactions in diphoton + dijet events in $p\bar{p}$ collisions at $\sqrt{s} = 1.96$ TeV

We use a sample of diphoton+dijet events to measure the effective cross section of double parton interactions, which characterizes the area containing the interacting partons in proton-antiproton collisions, and find it to be σeff=19.3±1.4(stat)±7.8(syst) mb. The sample was collected by the D0 detector at the Fermilab Tevatron collider in pp¯ collisions at s=1.96 TeV and corresponds to an integrated luminosity of 8.7 fb-1.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evidence for Simultaneous Production of J/ψ and Υ Mesons

We report evidence for the simultaneous production of J/ψ and Υ mesons in 8.1 fb$^{-1}$of data collected at $\sqrt{s}$ = 1.96 TeV by the D0 experiment at the Fermilab $p\bar{p}$ Tevatron Collider. Events with these characteristics are expected to be produced predominantly by gluon-gluon interactions. In this analysis, we extract the effective cross section characterizing the initial parton spatial distribution, σ$_{eff}$=2.2±0.7(stat)±0.9(syst) mb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Joint measurement of the atmospheric muon flux through the Puy de Dome volcano with plastic scintillators and Resistive Plate Chambers detectors

The muographic imaging of volcanoes relies on the measured transmittance of the atmospheric muon flux through the target. An important bias affecting the result comes from background contamination mimicking a higher transmittance. The MU-RAY and TOMUVOL collaborations measured independently in 2013 the atmospheric muon flux transmitted through the Puy de Dôme volcano using their early prototype detectors, based on plastic scintillators and on Glass Resistive Plate Chambers, respectively. These detectors had three (MU-RAY) or four (TOMUVOL) detection layers of 1 m 2 each, tens (MU-RAY) or hundreds (TOMUVOL) of nanosecond time resolution, a few millimeter position resolution, an energy threshold of few hundreds MeV, and no particle identification capabilities. The prototypes were deployed about 1.3 km away from the summit, where they measured, behind rock depths larger than 1000 m, remnant fluxes of 1.83±0.50(syst)±0.07(stat) m –2 d –1 deg –2 (MU-RAY) and 1.95±0.16(syst)±0.05(stat) m –2 d –1 deg –2 (TOMUVOL), that roughly correspond to the expected flux of high-energy atmospheric muons crossing 600 meters water equivalent (mwe) at 18° elevation. This implies that imaging depths larger than 500 mwe from 1 km away using such prototype detectors suffer from an overwhelming background. These measurements confirm that a new generation of detectors with higher momentum threshold, time-of-flight measurement, and/or particle identification is needed. As a result, the MU-RAY and TOMUVOL collaborations expect shortly to operate improved detectors, suitable for a robust muographic imaging of kilometer-scale volcanoes.

79 ASTRONOMY AND ASTROPHYSICS↗