Engineering Papers⌕ Search

Engineering topics

Bhattacharya, Sumit

Publications and source records attributed to Bhattacharya, Sumit.

At least 19 records

Thermal conductivity degradation due to radiation-induced amorphization in U 3 Si 2 : A pilot study

Here, in this study, we investigate the thermal conductivity of U 3 Si 2 amorphized by ion irradiation using 84 MeV 136 Xe ions at 190 °C. The suspended-bridge method was utilized to measure the thermal conductivity, allowing for a detailed analysis of the specimen while minimizing interference from other crystalline phases. Our results indicate that the thermal conductivity of amorphous U 3 Si 2 is significantly lower than that of unirradiated crystalline U 3 Si 2 . These findings are consistent with recent studies on in-pile-irradiated U 3 Si 2 samples that consider the effects of U 3 Si 2 amorphization, fission gas bubbles, and other impurities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Zirconium nanoparticle coating development for FCCI diffusion barrier in nuclear cladding

Fuel clad chemical interaction (FCCI) is a pervasive issue for metallic nuclear fuels. FCCI can damage cladding, reduce thermal efficiency, and compromise the structural integrity of the fuel rod. In this study, we evaluated the FCCI mitigation capabilities of electrophoretically-deposited Zr nanoparticle coatings on ferritic-martensitic stainless-steel cladding (HT9). Zr was deposited on the internal surface of 6 mm outer diameter cladding using electrophoretic deposition (EPD). Thickness varied among samples with similar EPD conditions. A uniformly coated sample was selected and sent to the Argonne Tandem Linac Accelerator System (ATLAS) to simulate the coating's behavior under irradiation conditions. Furthermore, the coating prevented FCCI in diffusion couple studies. Results of this study confirm that Zr could potentially make an effective FCCI barrier in metallic fuel rods but the deposition process needs improvement.

36 MATERIALS SCIENCE↗

Development of Hydrogen Permeation Barrier and Matrix Interaction Protection Coatings for TZM Enclosure of Hydride Moderators (Microreactor Program M3 Report)

It is important to develop a high-performance enclosure solution for hydride-based microreactor moderation components to effectively suppress hydride thermal decomposition and prevent hydrogen loss in harsh in-reactor environments. Currently, the DOE-NE Microreactor Program (MR program) is investigating the titanium-zirconium-molybdenum (TZM) canned yttrium hydride (YH 2-x ) solution, which provides acceptable hydrogen retainment performance up to ~700 °C. However, improvements in the enclosure are necessary for increasing long-term operation temperature beyond 700 °C and enhancing short-term survivability at even higher temperatures during power transients. One potential solution is the addition of a dedicated hydrogen permeation barrier, which can potentially improve the enclosure's performance. Furthermore, the hydride moderator components will be inserted into the microreactor matrix, which may consist of materials that are not chemically inert against TZM. Therefore, the TZM might need to be protected from the external environment through the application of another surface protection coating. To address these critical issues, two types of barrier coatings optimized for TZM-based moderator enclosure has been developed. A multilayer coating approach has been used to identify TZM-compatible barrier materials. Behavior of these coating designs against H 2 permeation and long-term high-temperature graphite matrix interactions has been examined in detail. Additionally, the developed coatings' behavior when exposed to both high-temperature thermal cycling and heavy-ion irradiation has also been investigated. Overall, the development of these barrier coatings is essential for achieving maturity for the metal hydride moderator technology. The results in this report will provide crucial insights into the behavior of the developed coatings and their potential for improving the long-term performance of TZM-based moderator enclosures.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Thermionic converter and methods of making and using same

Provided herein are thermionic converters that are capable of operating at lower temperatures and with increased efficiency as compared to conventional thermionic converters. Also provided are methods of using and making the thermionic converters of the disclosure.

Yacout, Abdellatif M.↗

Neutron moderation modules

Provided herein is a neutron moderation module and a thermal-neutron nuclear micro-reactor.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

High-temperature and/or high pressure gas enclosure

A gas enclosure can include a refractory metal liner; a ceramic matrix composite cladding; and a diffusion barrier layer. The refractory metal liner is adapted to surround and enclose a gas to be contained within the gas enclosure. The diffusion barrier layer is disposed between the refractory metal liner and the ceramic matrix composite cladding.

Miao, Yinbin↗

Conceptual core design of the molten metal fueled microreactor with self-regulating capability

The microreactor concept has received significant attention in the United States for its lower capital investment, siting flexibility and high mobility. A microreactor aims to provide reliable electricity in remote communities, mining areas, or isolated islands, which will save the high fuel transportation cost. Thus, minimizing the staff level for operating and maintaining a microreactor is desirable. The objective of the study is to design a self-regulated Molten Metal fueled microReactor core (MMR) and to demonstrate the self-regulating capability of the MMR core. The control of the reactor is solely relying on reactivity feedbacks from fuel temperature perturbation. Molten UMn (liquid form at the temperature over 720°C) was utilized as the fuel material in MMR due to the larger thermal expansion coefficient compared to the conventional solid fuel. The MMR core has a fast neutron spectrum, which corresponds to a small burnup reactivity swing. The core design parameters were selected based on DAKOTA, REBUS, and ANLHTP calculations. The MMR is designed to run for 10 years at a power level of 15 MWth. Furthermore, no refueling is needed during the reactor lifetime. The system dynamic analyses were performed, and it was found that the reactor can be self-regulating within a temperature range of 800 ± 80°C for a loss of heat sink transient.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Method for nano powder loading into micro-capillary mold

A method loading powder into a mold can include immersing the mold comprising one or more microchannels into a suspension comprising the powder and a surfactant suspended in a dispersant, wherein the powder comprises particles having an average particle size of less than 100 μm, wherein the mold is substantially entirely covered by the suspension; heating the suspension having the mold immersed therein under a temperature condition suitable to lower the stability of the particles of the powder in the suspension such that the particles settle out of solution and into the one or more microchannels; and applying an ultrasonic wave to the heated suspension to further settle the particles of the powder into the one or more microchannels thereby filling the one or more microchannels of the mold with the powder.

Yacout, Abdellatif M.↗

Versatile Heat Transfer Module

Development of micro-reactors that can be easily transported to remote areas for civilian or military applications is an immediate focus of U.S. nuclear industry and therefore is being pursued by multiple reactor vendors (e.g. HolosGen LLC, Westinghouse, Ultra Safe Nuclear Corporation, URENCO, etc.) and actively supported by DOE-NE, DOE-ARPA-E and by the Department Of Defense (DoD). Very-high-temperature gas-cooled (VHTR) and heat pipe cooled reactor technologies are regarded as promising concepts for microreactors applications since they enable compact power conversion systems and display beneficial inherent safety features. Development of microreactors with enhanced performance must be supported by innovations in nuclear technologies. Several technologies being developed by the microreactor industry are being revisited with material technologies developed at the Argonne National Laboratory (ANL). Innovative high-temperature compatible solutions are developed to enable advanced thermal-spectrum microreactor designs featuring improved neutronics performance at high-temperature operating conditions to enable high thermal efficiency and economic competitiveness. This report focuses on the Versatile Heat Transfer Module (VHTM) technology that is developed at ANL for heat-transfer in thermal-spectrum microreactors. This technology is built on a liquid alkali metal heat pipe concept while leveraging advanced nuclear material technologies for high-temperature applications at reduced neutronic penalty with potential improvement in inherent safety behavior. The VHTM can be applied to design high-temperature thermal-spectrum microreactor systems with reduced size, weight, uranium enrichment, or increased lifetime. The INFINIT technology deriving from the VHTM enables design of a highly compact long-life microreactor concept for fission surface power (FSP). Demonstration of multiphysics modeling capability was also completed to showcase the added inherent safety benefits obtained with this concept. The VHTM technology remain at an early development stage with low Technology Readiness Level and Manufacturing Readiness Level. The current demonstration of these technologies has focused on manufacturing capability, on performance of the hydrogen diffusion barrier under thermal cycling, while radiation tolerance demonstration is planned. The next step of the demonstration plan will be the assembly of miniature VHTM for high-temperature testing, which can be used as a prototype for future pilot scale demonstration. Such research is critical to pursue development of these technologies that have the clear potential to significantly improve the performance of currently investigated micro-reactors systems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Advanced Coolant Enclosure Solutions for Micro Gas Cooled Reactors with Enhanced Efficiency and Safety

Argonne’s advanced high-pressure, high-temperature gas enclosures solutions were developed and tested for Light Water Reactor (LWR) fuel applications wherein pressure, temperature, fuel and working fluid are substantially different when compared to the operating conditions typical of gas cooled reactors (GCR). For LWR applications the coolant sleeve pressure exerted on the inner and outer walls of the sleeve may be equalized by pressurizing the fuel rod (e.g., with helium gas) to compensate for the coolant high pressure exerted on the outer walls of the sleeve. This results in a lower differential pressure. Micro-GCRs are reactor systems operated at elevated temperatures and pressure with gas as a working fluid. HolosGen’s Holos-Quad represent a type of Micro-GCR wherein the core is sleeved to segregate the fuel and other components from the working fluid.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Temperature Effect over Gas Bubble Evolution in Uranium-10 wt.% Molybdenum alloy Irradiated by Swift Xe Ions

Results from post-irradiation examination (PIE) of U-10Mo binary metallic fuel irradiated by 84 MeV Xe ions at two different temperatures (450°C & 275°C) have been evaluated and reported. The main goal of this study was to understand gas bubble formation (due to accumulation of Xe gas) and corresponding size evolution dependent upon net Xe deposition at two different temperatures, for the U-10Mo fuel samples. From the post ion irradiation examination analysis, it can be concluded that at 450°C the Xe gas bubbles seems to coarsen more easily compared to 275°C. The results of ion irradiation testing can provide initial data that may be beneficial for fuel system down-selections, and for the development and validation of fuel performance models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Temperature Effect of Gas Bubble Evolution in UCN Fuel Kernels Irradiated by Swift Xe Ions

UC1-xNx fuel kernels provided by Oak Ridge National Laboratory (ORNL) were irradiated by 84 MeV Xe ions at two different temperatures (450°C & 750°C) at the Argonne Tandem Linac Accelerator System (ATLAS) at Argonne National Laboratory, followed by post-irradiation examination. The primary goal of this study was to understand gas bubble formation (due to accumulation of Xe gas) and corresponding size evolution dependent upon net Xe deposition at the two different temperatures. From the post-irradiation examinations of the samples, it can be concluded at 750°C, with same amount of dose received, the Xe gas bubbles seems to coarsen much more easily compared to 450°C. The results generated for fission gas bubble evolution observed in this study can be used to support fuel performance models for UC1-xNx fuel kernels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Selection and Characterization of Surrogate Material for Developing Zr Barrier Coatings for Uranium Nitride Particles

In support of UC 1-x N x fuel kernels (~ 800 micrometer diameter) development work ongoing at Oak Ridge national laboratory (ORNL), where the fuel kernels will be embedded inside a possible zirconium based matrix, Argonne National Laboratory (ANL) is contributing to help develop a robust metal diffusion barrier coating. Zirconium nitride (ZrN) and Zirconium oxide (ZrO2) were selected as possible diffusion barrier candidates, and the atomic layer deposition (ALD) has been chosen as a candidate technology to deposit the film. Development of such a barrier coating with the ALD process entails significant number of trials to study relevant parameters. Therefore, to prevent needless wastage, instead of coating directly over fuel kernels, a surrogate candidate with similar dimensions and physical properties were been selected and coated to develop the diffusion barrier coating.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Preliminary results from Low Pressure Steam Oxidation Testing of ALD ZrN and ZrO2 Coating Deposited over UCN Fuel Kernels

Steam oxidation testing was used to investigate as-developed 100 nm ALD ZrN and 1000 nm ZrO 2 coatings deposited over UC1-xNx fuel kernels. The results of these tests were compared against oxidation of uncoated kernels. This work was performed to support development of coatings which both provide high temperature Zr metal diffusion barrier and also provide resistance against oxidation, especially against high temperature steam and/or air. This work was performed in collaboration with Oak Ridge National Laboratory (ORNL), using ORNL-provided samples. The oxidation tests yielded valuable information, including relative differences in performance of different coating materials and coating thicknesses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructure investigations of temperature effect on Al-UMo diffusion couples irradiated by swift Xe ions

Post-irradiation examination (PIE) results of microstructure in irradiated Al-UMo diffusion couples are reported here. These diffusion couples were irradiated by 60 MeV Xe ions at four different temperatures up to approximately 5.5 × 10 17 ions/cm 2 peak ion fluence. An Al-UMo interaction layer (IL) was found to form at all four investigated temperatures. The IL is homogeneously amorphous when formed up to 150 °C. At 215 °C, the (U,Mo)Al 3 nanocrystalline precipitates form within the amorphous IL matrix. Kirkendall voids with prominent temperature dependence were observed in both the Al layer and its interface with the IL. On the other hand, Xe bubbles were found to form in UMo and Al-UMo IL with different morphology. These microstructure features were quantitatively measured and are reported to provide valuable references for understanding the irradiation behavior of UMo/Al dispersion fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructure evolution in U-10Zr alloy irradiated by swift Xe ions at 700 °C

The post-irradiation examination (PIE) results of U-10Zr binary metallic fuel that was irradiated by 84 MeV Xe ions at 700 °C are reported here. The U-10Zr specimen was synthesized by homogenizing elemental U and Zr powders through arc-melting. The as-fabricated U-10Zr was dominated by the sub-micron acicular α+ δ phase. After being irradiated by 84 MeV Xe ions at 700 °C up to 2.19 ×10 17 ions/cm 2 fluence, the U-10Zr was speculated to evolve into micro-scale γ 1 + γ 2 phases as predicted by the U-Zr phase diagram. During post-irradiation cooling, the U-rich γ 1 phase was mainly transformed to the αphase, while the Zr-rich γ 2 phase was partially retained along with formation of hexagonal structure phase (δ or ω). Xe bubbles formed in the γ 1 and γ 2 phases have salient different morphologies, implying faster Xe diffusion in the γ 1 phase than the γ 2 phase. The quantitative bubble morphology data collected in this study can provide valuable references for the development and validation of fuel performance models for this fuel.

36 MATERIALS SCIENCE↗

Advanced Moderation Module for High-Temperature Micro-Reactor Applications

Development and deployment of micro-reactors that provide competitive efficiency, prevailing compactness, and inherent safety is an immediate focus of the U.S. nuclear industry. For thermal neutron micro-reactors operating at elevated temperature for optimized efficiency, such as micro molten-salt reactors (MSRs), heat-pipe reactors, and very-high temperature reactors (VHTRs), high-performance moderator based on metal hydride can enhance the neutron economy and therefore achieve reduced weight and enhanced portability. As unclad metal hydride inevitably decomposes at elevated temperature, an enclosure is required for hydride moderator to deliver desired performance at elevated temperatures. Conventional moderator enclosure solutions based on high-temperature alloys introduce extraneous neutron penalty into the micro-reactor, affecting the neutronic benefits provided by the hydride moderator. Additionally, the compatibility between the high-temperature alloy enclosure and the micro-reactor matrix is also a potential issue. In this report, we disclose an Advanced Moderator Module (AMM) concept enabled by an innovative enclosure solution combining the advantages of refractory metals, ceramic matrix composites (CMCs), and advanced coating technology to serve as hydrogen permeation barrier up to very-high temperatures. A schematic description of the AMM structure is illustrated in Figure A1. The AMM contains a moderating material core made of metal hydride with high thermal stability, such as YH 2-x . The hydride core is enclosed by an H 2 barrier layer coated on a ductile refractory metal liner to minimize hydrogen loss during high-temperature operation. A ceramic matrix composite (CMC) cladding is adopted to provide further structural strength, especially during power transients. Between the CMC cladding and metal liner, an extra diffusion barrier coating is inserted to suppress the chemical interaction at elevated temperatures. Hence, based on a series of innovative material solutions, the AMM is capable of containing the metal hydride core at elevated temperature (>900oC) inside coated and lined CMC envelop with negligible hydrogen loss throughout the microreactor lifetime. The benefit of the AMM technology was assessed based on a comprehensive multi-stage reactor-physics analysis. Advanced moderation based on hydride metals (such as YH2-x) enables reaching optimum moderation with higher fuel content than traditional VHTR technology, which is required to design compact micro-reactor cores targeting long-life operation. The AMM enclosure technology provides lower thermal neutron absorption rates than traditional solutions (based on stainless steel or Mo-based alloy such as TZM), which reduces the fissile enrichment requirements by 6-8% on a TRISO-fueled design based on the EMPIRE core. Finally, combining the hydride moderator with neutron transparent enclosure solutions provides significant potential to boost neutronics performance of micro-reactors in terms of increased core lifetime or reduced size and weight by 30-50% on a micro-reactor based on the Holos Quad technology. The progress and plans for on-going development and demonstration efforts are also discussed in this report. The current demonstration of AMM is focused on the hydrogen diffusion barrier demonstration under thermal cycling, while radiation tolerance demonstration is planned. The next step of the demonstration plan will be the assembly of miniature AMM for high-temperature testing, which can be used as a prototype for future pilot scale demonstration.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗