Engineering topics
Beckham, Gregg T.
Publications and source records attributed to Beckham, Gregg T..
RNAseq data for P. putida with vanillate
Illumina sequencing reads from RNA sequencing of vanillate-utilizing strains of Pseudomonas putida, described in Evolution and engineering of pathways for aromatic O-demethylation in Pseudomonas putida KT2440 by A. Bleem, et al. (2024)
Comparison of native and heterologous pathways for aromatic O-demethylation in Pseudmonas putida KT2440 enabled by adaptive laboratory evolution
Comparison of native and heterologous pathways for aromatic O-demethylation in Pseudomonas putida KT2440 enabled by adaptive laboratory evolution
Evolution_and_engineering_of_pathways_for_aromatic_O-demethylation_in_Pseudomonas_putida_KT2440
Biological conversion of lignin from biomass offers a promising strategy for sustainable production of fuels and chemicals. However,aromatic compoundsderived from lignin commonly contain methoxy groups, andO-demethylation of these substrates is often a rate-limiting reaction that influences catabolic efficiency. Severalenzymefamilies catalyze aromaticO-demethylation, but they are rarely comparedin vivoto determine an optimal biocatalytic strategy. Here, two pathways for aromaticO-demethylation were compared inPseudomonas putidaKT2440. The native Rieske non-heme ironmonooxygenase(VanAB) and, separately, a heterologous tetrahydrofolate-dependentdemethylase(LigM) were constitutively expressed inP. putida, and the strains were optimized via adaptive laboratory evolution (ALE) withvanillateas a model substrate. All evolved strains displayed improved growth phenotypes, with the evolved strains harboring the native VanAB pathway exhibiting growth rates ∼1.8x faster than those harboring the heterologous LigM pathway.Enzyme kineticsandtranscriptomicsstudies investigated the contribution of selected mutations toward enhanced utilization of vanillate. The VanAB-overexpressing strains contained the most impactful mutations, including those in VanB, thereductasefor vanillateO-demethylase, PP_3494, a global regulator of vanillate catabolism, andfghA, involved in formaldehydedetoxification. These three mutations were combined into a single strain, which exhibited approximately 5x faster vanillate consumption than the wild-type strain in the first 8 h of cultivation. Overall, this study illuminates the details of vanillate catabolism in the context of two distinct enzymatic mechanisms,yielding a platform strain for efficientO-demethylation of lignin-related aromatic compounds to value-added products. This DOI contains supplementary material associated with the published manuscript.
Lignin Extraction and Condensation as a Function of Temperature, Residence Time, and Solvent System in Flow-through Reactors
Solvolytic extraction of lignin from biomass is a critical step in lignin-first biorefining, including the reductive catalytic fractionation (RCF) process. Key to optimal RCF processing is the ability to rapidly extract lignin from biomass at high delignification extents and transfer the lignin molecules to a catalyst surface in a time frame that minimizes lignin condensation reactions. Here, we use a flow-through reactor to study the effects of temperature (175–250 °C), residence time (9 to 36 min), and solvent composition (methanol and methanol–water) on lignin extraction and condensation. We evaluated three metrics at each condition: total delignification, delignification rate, and extent of condensation, the latter measured by a decrease in monomer yield for batch hydrogenolysis reactions of solvolysis liquor compared to batch RCF reactions. We observe that delignification is predominantly determined by temperature, while residence time dictates the lignin condensation extent. Moreover, the extent of both extraction and condensation increased in the methanol–water solvent system compared to that in the methanol system. Lignin extracted in methanol is stable up to 18-min residence times at or below 225 °C, while a majority of the lignin extracted in methanol–water is condensed with a 9-min residence time at 200 °C. These results can inform reactor designs and solvent selection for lignin-first biorefining processes that aim to physically separate the biomass and catalyst.
Lignin Extraction and Condensation as a Function of Temperature, Residence Time, and Solvent System in Flow-through Reactors -Figure data
Data for Figures from Lignin extraction paper, https://pubs.acs.org/doi/10.1021/acssuschemeng.5c04198
Lignin Extraction and Condensation as a Function of Temperature, Residence Time, and Solvent System in Flow-through Reactors -Tables
tabulated data for Lignin extraction paper, https://pubs.acs.org/doi/10.1021/acssuschemeng.5c04198
Engineered Membrane Vesicle Production via oprF or oprI Deletion Has Distinct Phenotypic Effects in Pseudomonas putida - raw data for replicates
raw data for replicates for https://pubs.acs.org/doi/full/10.1021/acssynbio.5c00171
Engineered Membrane Vesicle Production via oprF or oprI Deletion Has Distinct Phenotypic Effects in Pseudomonas putida -putative knockouts table
Table S1, putative gene knockout targets in P. putida KT2440 to enhance vesiculation; Table S2, protein sequence identity of OmpA from E. coli K12 to P. putida KT2440 genes; Table S3, strains utilized in this study and corresponding construction details; Table S4, oligonucleotides utilized in this study; Table S5, plasmids utilized in this study; Table S6, sequences for mNeonGreen, tags, and codon-optimized genes; Figure S1, particle count per gCDW for KT2440 and knockout strains corresponding to data presented in Figure 1B; Figure S2, OD600 measurements of extracted MVs from KT2440 and knockout strains; Figure S3, particle count per gCDW for WT, ΔPP_4669, and ΔPP_1502; Figure S4, particle count per gCDW for KT2440 and knockout strains corresponding to data presented in Figure 3C; Figure S5, sizes of MVs corresponding to particle counts in Figure S4; Figure S6, particle count per gCDW for KT2440 grown on 20 mM glucose alone or 20 mM glucose plus 12.5 mM p-coumarate and 12.5 mM ferulate; Figure S7 and Figure S8, principal component analysis of the cellular fractions; Figure S9, heatmap of outer membrane proteins with differential abundance; and Figure S10, mNeonGreen (mNG) fluorescence signal for the cellular fraction and the extracellular fraction
Pseudomonas putida membrane vesicles
Cellular and membrane vesicle proteomes from Pseudomonas putida KT2440 and engineered derivative strains. Proteomic quantification by diDO-IPTL (Waldbauer et al. 2017 Analytical Chemistry).
Tabulated data for Lignin-Derived Phenolic Compounds and Water Are Effective Cosolvents for Reductive Catalytic Fractionation
Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. We demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents. This is the tabulated data for the paper
Calculation of monomer yields, verification of PG concentration approximation, catalyst comparison for neat aromatic RCF, SEM micrographs for postreaction pulps, yields of aqueous-phase sugar derivatives after PG-H2O RCF, reactor pressure transients, GPC comparing pre- and postreaction organic solvent composition, PG-H2O miscibility testing, GPC probing dimer/oligomer fractionation in PG-H2O mixtures for
Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. We demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents.
Lignin-Derived Phenolic Compounds and Water Are Effective Cosolvents for Reductive Catalytic Fractionation
Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. We demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents.
Determination of particle number concentration for biological particles using AF4-MALS: Dependencies on light scattering model and refractive index
Not Available
Adaptive laboratory evolution and metabolic engineering of Cupriavidus necator for improved catabolism of volatile fatty acids
Bioconversion of high-volume waste streams into value-added products will be an integral component of the growing bioeconomy. Volatile fatty acids (VFAs) (e.g., butyrate, valerate, and hexanoate) are an emerging and promising waste-derived feedstock for microbial carbon upcycling. Cupriavidus necator H16 is a favorable host for conversion of VFAs into various bioproducts due to its diverse carbon metabolism, ease of metabolic engineering, and use at industrial scales. Here, in this study, we report that a common strategy to improve product titers in C. necator, deletion of the polyhydroxybutyrate (PHB) biosynthetic operon, results in a significant growth defect on VFA substrates. Using adaptive laboratory evolution, we identify mutations to the regulator gene phaR, the two-component response regulator-histidine kinase pair encoded by H16_A1372/H16_A1373, and the tripartite transporter assembly encoded by H16_A2296-A2298 as causative for improved growth on VFA substrates. Deletion of phaR and H16_A1373 led to significantly reduced NADH abundance accompanied by large changes to expression of genes involved in carbon metabolism, balance of electron carriers, and oxidative stress tolerance that may be responsible for improved growth of these engineered strains. These results provide insight into the role of PHB biosynthesis in carbon and energy metabolism and highlight a key role for the regulator PhaR in global regulatory networks. By combining mutations, we generated platform strains with significant growth improvements on VFAs, which can enable improved conversion of waste-derived VFA substrates to target bioproducts.
Solid–liquid separation of lignocellulosic sugars from biomass by rotating ceramic disc filtration
In many biomass conversion processes, the separation of cellulosic sugars from residual, lignin-rich solids is a critical step, and achieving high recovery yields of sugars by conventional tangential crossflow and vacuum filtration is challenged by the presence of biomass solids, which rapidly foul filters, resulting in decreased throughput. Considering the performance limitations of traditional filtration methods, dynamic filtration, which generates high shear at the membrane surface to decrease fouling, is emerging as a viable alternative for demanding solid–liquid separations. For high solids separations, there is little available information regarding the performance, limitations, and energy consumption of dynamic filtration. To that end, here we characterized the performance of a dynamic filtration module, specifically a rotating ceramic disc (RCD) filter, for the aseptic recovery of cellulosic sugars from biomass solids following pretreatment and enzymatic hydrolysis. We show how RCD rotational velocity and percent biomass solids impact the filter throughput. Additionally, we used computational fluid dynamics (CFD) simulations to estimate the shear rate at the membrane surface and to visualize hydrodynamic profiles within the module. With the combined CFD simulations and experimental results, we estimated the energy demand and operating expenses for a viable dynamic filtration system operating with a lignocellulosic feed slurry. Our results indicate that an RCD filter can achieve ≥95% recovery of sugars and produce a retentate slurry containing 12 wt% insoluble solids with low energy consumption (a 2.2-fold improvement over cross-flow filtration) and low operating costs ($\$$0.06 per kg sugars). These results show a viable path towards operationally reliable, energy efficient, and cost-effective separations of sterilized cellulosic sugars from biomass solids and highlight the potential of dynamic filtration systems for challenging solid–liquid separations.
Chain-End Controlled Depolymerization Selectivity in α,α-Disubstituted Propionate PHAs with Dual Closed-Loop Recycling and Record-High Melting Temperature
In this article, within the large poly(3-hydroxyalkanoate) (PHA) family, C3 propionates are much less studied than C4 butyrates, with the exception of α,α-disubstituted propionate PHAs, particularly poly(3-hydroxy-2,2-dimethylpropionate), P3H(Me) 2 P, due to its high melting temperature (T m ~ 230 °C) and crystallinity (~76%). However, inefficient synthetic routes to its monomer 2,2-dimethylpropiolactone [(Me) 2 PL] and extreme brittleness of P3H(Me) 2 P largely hinder its broad applications. Here, we introduce simple, efficient step-growth polycondensation (SGP) of a hydroxyacid or methyl ester to afford P3H(Me) 2 P with low to medium molar mass, which is then utilized to produce lactones through base-catalyzed depolymerization. The ring-opening polymerization (ROP) of the 4-membered lactone leads to high-molar-mass P3H(Me) 2 P, which can be depolymerized by hydrolysis to the hydroxyacid in 99% yield or methanolysis to the hydroxyester in 91% yield, achieving closed-loop recycling via both SGP and ROP routes. Intriguingly, the chain end of the SGP-P3H(Me) 2 P determines the depolymerization selectivity toward 4- or 12-membered lactone formation, while both can be repolymerized back to P3H(Me) 2 P. Through the formation of copolymers P3H(Me/R) 2 P (R = Et, n Pr), PHAs with high tensile strength and ductility, coupled with high barriers to water vapor and oxygen, have been created. Notably, the PHA structure–property study led to P3H( n Pr) 2 P with a record-high T m of 266 °C within the PHA family.
Accessing monomers from lignin through carbon–carbon bond cleavage
Lignin, the heterogeneous aromatic macromolecule found in the cell walls of vascular plants, is an abundant feedstock for the production of biochemicals and biofuels. Here, many valorization schemes rely on lignin depolymerization, with decades of research focused on accessing monomers through C–O bond cleavage, given the abundance of β–O–4 bonds in lignin and the large number of available C–O bond cleavage strategies. Monomer yields are, however, invariably lower than desired, owing to the presence of recalcitrant C–C bonds whose selective cleavage remains a major challenge in catalysis. In this Review, we highlight lignin C–C cleavage reactions, including those of linkages arising from biosynthesis (β–1, β–5, β–β and 5–5) and industrial processing (5–CH 2 –5 and α–5). We examine multiple approaches to C–C cleavage, including homogeneous and heterogeneous catalysis, photocatalysis and biocatalysis, to identify promising strategies for further research and provide guidelines for definitive measurements of lignin C–C bond cleavage.