Engineering Papers⌕ Search

Engineering topics

Barmatz, M.

Publications and source records attributed to Barmatz, M..

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

(abstract) Vibration Method for Tracking the Resonant Mode and Impedance of a Microwave Cavity

We have developed a vibration technique to continuously maintain mode resonance and impedance match between a constant frequency magnetron source and resonant cavity. This method uses a vibrating metal rod to modulate the volume of the cavity that is equivalent to modulating an adjustable plunger. A similar vibrating metal rod attached to a stub tuner modulates the waveguide volume between the source and cavity. A phase sensitive detection scheme determines the optimum position of the adjustable plunger and stub tuner. The improved power transfer during the heating of a 99.8% pure alumina rod was demonstrated using this new technique. Temperature-time and reflected power-time plotswill be presented for the cases of no tracking, impedance tracker only, mode tracker only, and simultaneous impedance and mode tracking. Internal melting of the alumina rod near 2000°C with both trackers on will also be discussed.

microwave↗
NASA NTRS1994

Rapid Selective Annealing of Cu Thin Films on Si Using Microwaves

A major goal of the semiconductor indurstry is to lower the processing temperatures needed for interconnects in silicon integrated circuits. Typical rapid thermal annealing processes heat the film as well as the substrate, creating device problems.

silicon integrated circuits microwave thin films↗
NASA NTRS1993

Microwave techniques for physical property measurements

Industrial processing of metals and ceramics is now being streamlined by the development of theoretical models. High temperature thermophysical properties of these materials are required to successfully apply these theories. Unfortunately, there is insufficient experimental data available for many of these properties, particularly in the molten state. Microwave fields can be used to measure specific heat, thermal diffusivity, thermal conductivity and dielectric constants at high temperatures. We propose to (1) develop a microwave flash method (analogous to the laser flash technique) that can simultaneously measure the thermal diffusivity and specific heat of insulators and semiconductors at high temperatures, (2) an appropriate theory and experimental apparatus to demonstrate the measurement of the specific heat of a metal using a new microwave ac specific heat technique, and (3) experimental methods for noncontact measurement of the real and imaginary dielectric constants.

Barmatz, M.↗
NASA NTRS1993

Transient Temperature Behavior of a Sphere Heated by Microwaves

We have developed a model for microwave heating of a sphere in a rectangular resonant cavity. The model calculates transient temperature distributions within a sphere during the approach to steady state conditions or on the path to thermal runaway.

microwave heating microwave absorption↗
NASA NTRS1992

Microwave processing of materials in microgravity

The Jet Propulsion Laboratory is investigating the use of microwave energy as a controlled heating and positioning source for the processing of materials in the microgravity environment of space. Ground-based studies of the positioning capabilities of microwave forces are presented. The ability to quickly and efficiently control the heating of a variety of materials is demonstrated, and the heating of several representative materials is presented. A compact cold-wall microwave furnace compatible with future flight experiments in a shuttle mid-deck cannister is evaluated. The development of a hybrid containerless processing facility that will serve both as an acoustic positioning chamber and a microwave-heating cavity is also proposed. The design characteristics of a cold-wall furnace and hybrid heater/positioner are reviewed.

Barmatz, M.↗
NASA NTRS1992

Steady state temperature profile in a sphere heated by microwaves

A new theory has been developed to calculate the microwave absorption and resultant temperature profile within a sphere positioned in a single mode rectangular cavity. This theory is an extension of a total absorption model based on Mie scattering results. Temperature profiles have been computed for alumina spheres at the center of a rectangular cavity excited in the TM354 mode. Parametric studies reveal significant structure in those profiles under special conditions that are associated with electromagnetic resonances inside the spheres. Anomalous behavior similar to thermal runaway occurs at moderate temperatures when there is enhanced absorption associated with resonant conditions in the sphere.

Barmatz, M.↗
NASA NTRS1991

Microwave absorption by a lossy dielectric sphere in a rectangular cavity

A new theory of absorption of microwave power by a lossy dielectric sphere in a resonant rectangular chamber is developed here. In this treatment, resonant modes of the cavity are resolved into traveling plane-wave fields, and Mie's theory of scattering and absorption of a plane electromagnetic wave by a sphere is utilized. The fields in the cavity containing the sphere are found by superposition of results for the individual scattering problem for each traveling plane wave. Absorbed power is then calculated by evaluating the time-averaged Poynting vector and integrating over the surface of the sphere. Applications of microwave power absorption are discussed, with particular emphasis on processing of materials. Numerical studies based on the newly derived formulas are presented. The results exhibit the manner in which microwave absorption is influenced by a number of different experimentally controllable parameters. The examples considered were chosen with a view toward designing experiments and apparatus for containerless processing of materials in the microgravity environment of space.

Jackson, H. W.↗
NASA NTRS1991

Method for calculating and observing microwave absorption by a sphere in a single mode rectangular cavity

A new theory of microwave absorption by a lossy dielectric sphere in a single mode rectangular cavity has been recently developed. The absorption was treated in the framework of an electromagnetic scattering problem. That theory is summarized here and calculated results that bear on optimizing the processing of materials are illustrated. Methods for observing power absorption and other results predicted by the scattering model are discussed. Cavity perturbation theory provides a bridge between theoretical calculations and experimental observations, and a special problem that arises when an established version of cavity perturbation theory is applied to spheres is identified, analyzed, and resolved. The direct problem of predicting shifts in frequency and Q from model calculations is discussed for a sphere in a cavity when the sphere's complex dielectric constant is known. Also, the inverse problem of determining the complex dielectric constants from measured values of those shifts is considered. The small sphere limit, where an electrostatic or quasistatic model is valid, is treated in detail, and planned work on parallel problems for larger spheres is described.

Jackson, H. W.↗
NASA NTRS1991

Measurement of cavity perturbation to determine the microwave absorption of a sphere in a single mode resonator

Experiments have been conducted on materials in a single mode microwave resonator to test predictions of a new theory of microwave absorption by a lossy dielectric sphere. An analysis of cavity perturbation for verifying the new absorption model revealed a limitation of a standard form of cavity perturbation theory and led to a modification which generalized its application. The cavity perturbations of a nylon sphere were used to calculate the complex permittivity using the standard perturbation theory and the modified form. These permittivity values were compared to that determined from cavity perturbation using a thin nylon rod where the standard and modified forms agree. The results show that the modification is necessary to correctly apply perturbation theory to spherical samples. A second experiment confirmed the theoretical prediction that under certain sample conditions the power absorbed by a sphere in a resonant cavity can be maximum at a location in the cavity where the empty cavity electric field intensity is a minimum.

Watkins, J. L.↗