Engineering Papers⌕ Search

Engineering topics

Armstrong, Beth L.

Publications and source records attributed to Armstrong, Beth L..

36 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

La 2 Zr 2 O 7 Nanoparticle-Mediated Synthesis of Porous Al-Doped Li 7 La 3 Zr 2 O 12 Garnet

In this work, we modified the reaction pathway to quickly (minutes) incorporate lithium and stabilize the ionic conducting garnet phase by decoupling the formation of a La–Zr–O network from the addition of lithium. To do this, we synthesized La 2 Zr 2 O 7 (LZO) nanoparticles to which LiNO 3 was added. This method is a departure from typical solid-state synthesis methods that require high-energy milling to promote mixing and intimate particle–particle contact and from sol–gel syntheses as a unique porous microstructure is obtained. We show that the reaction time is limited by the rate of nitrate decomposition and that this method produces a porous high-Li-ion-conducting cubic phase, within an hour, that may be used as a starting structure for a composite electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Evaluating the efficacy of aluminide coatings to improve oxidation resistance of high performance engine valve alloys

Increasing peak cylinder pressures and operating temperatures of turbo-charged internal combustion engines (ICEs) engines present new challenges for existing materials employed in engine exhaust valves. Oxidation induced degradation of current Ni based alloys for these components will be a life-limiting mechanism while strict cost margins in the automotive transportation industry further limit the choice of suitable candidate materials. Metallic diffusion aluminide coatings can provide a cost-effective way to improve the oxidation resistance of underlying materials. In this study, the high temperature oxidation behavior of diffusion nickel aluminide coatings on two Ni based alloys (commercially available alloy 31V and a developmental alloy) during cyclic oxidation behavior in air+10% H 2 O at 900 °C was investigated. A complete depletion of the beneficial Al-rich β-(NiFe)Al phase was observed in the coating on alloy 31V while a significant fraction of this phase was retained in the coating on the second alloy. A coupled thermodynamic-kinetic model showed that the disappearance of the Al-rich phase in the coating on 31V was mainly due to the combined effect of steeper chemical potential gradients of Al and Ti between the coating and the substrate and their faster diffusivities compared to the coated developmental alloy. Finally, a higher content of Fe was shown to support the retention of β-(NiFe)Al phase in the coating on the developmental alloy while the presence of Ti in the alloy was shown to be detrimental for long-term coating performance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Role of Low Molecular Weight Polymers on the Dynamics of Silicon Anodes During Casting

This work probes the slurry architecture of a high silicon content electrode slurry with and without low molecular weight polymeric dispersants as a function of shear rate to mimic electrode casting conditions for poly(acrylic acid) (PAA) and lithium neutralized poly(acrylic acid) (LiPAA) based electrodes. Rheology coupled ultra-small angle neutron scattering (rheo-USANS) was used to examine the aggregation and agglomeration behavior of each slurry as well as the overall shape of the aggregates. The addition of dispersant has opposing effects on slurries made with PAA or LiPAA binder. With a dispersant, there are fewer aggregates and agglomerates in the PAA based silicon slurries, while LiPAA based silicon slurries become orders of magnitude more aggregated and agglomerated at all shear rates. The reorganization of the PAA and LiPAA binder in the presence of dispersant leads to a more homogeneous slurry and a more heterogeneous slurry, respectively. This reorganization ripples through to the cast electrode architecture and is reflected in the electrochemical cycling of these electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Probing Clustering Dynamics between Silicon and PAA or LiPAA Slurries under Processing Conditions

This work explores the complex interplay between slurry aggregation, agglomeration, and conformation (i.e., shape) of poly(acrylic acid) (PAA)- and lithiated PAA-based silicon slurries as a function of the shear rate and the resulting slurry homogeneity. These values were measured by small-angle neutron scattering (SANS) and rheology-coupled ultra-SANS at conditions relevant to battery electrode casting. Different binder solution preparation methods, either a ball milling (BM) process or a planetary centrifugal mixing (PCM) process, dramatically modify the resulting polymer dynamics and organization around a silicon material. This is due to the different energy profiles of mixing where the more violent and higher energy PCM causes extensive breakdown and reformation of the binder, which is now likely in a branched conformation, while the lower energy BM results in simply lower-molecular weight linear polymers. In conclusion, the breakdown and reorganization of the polymer structure affect silicon slurry homogeneity, which affects subsequent electrode architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

XPCS Microrheology and Rheology of Sterically Stabilized Nanoparticle Dispersions in Aprotic Solvents

In this study, X-ray photon correlation spectroscopy (XPCS) microrheology and conventional bulk rheology were performed on silica nanoparticle dispersions associated with battery electrolyte applications to probe the properties of these specific complex materials and to explore the utility of XPCS microrheology in characterizing nanoparticle dispersions. Sterically stabilized shear-thickening electrolytes were synthesized by grafting poly(methyl methacrylate) chains onto silica nanoparticles. Coated silica dispersions containing 5–30 wt % nanoparticles dispersed in propylene carbonate were studied. In general, both XPCS microrheology and conventional rheology showed that coated silica dispersions were more viscous at higher concentrations, as expected. The complex viscosity of coated silica dispersions showed shear-thinning behavior over the frequency range probed by XPCS measurements. However, measurements using conventional mechanical rheometry yielded a shear viscosity with weak shear-thickening behavior for dispersions with the highest concentration of 30% particles. Our results indicate that there is a critical concentration needed for shear-thickening behavior, as well as appropriate particle size and surface polymer chain length, for this class of nanoparticle-based electrolytes. The results of this study can provide insights for comparing XPCS microrheology and bulk rheology for related complex fluids and whether XPCS microrheology can capture expected macroscopic rheological properties by probing small-scale particle dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Direct Measure of Electrode Spatial Heterogeneity: Influence of Processing Conditions on Anode Architecture and Performance

The spatial (in)homogeneity of aqueous processed silicon electrodes using standard poly(acrylic acid)-based binders and slurry preparation conditions is demonstrated in this work. X-ray nanotomography shows segregation of materials into submicron-thick layers depending on the mixing method and starting binder molecular weights. Using a dispersant, or in situ production of dispersant from the cleavage of the binder into smaller molecular weight species, increases the resulting lateral homogeneity while drastically decreasing the vertical homogeneity as a result of sedimentation and separation due to gravitational forces. This data explains some of the variability in the literature with respect to silicon electrode performance and demonstrates two potential ways to improve slurry-based electrode fabrications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Modified Coal Char Materials with High Rate Performance for Battery Applications

Global energy consumption has been rising since the early 2000s, and most of the energy supply still comes from burning fossil fuels. Considering the detrimental environmental impacts of fossil fuels, such as CO 2 emissions, it is crucial to develop clean energy technologies, such as storage devices that can advance long-term reversible and sustainable energy resources. In this work, we demonstrate the direct use of coal char in anodes tailored for both lithium-ion and sodium-ion batteries. The findings show that acid treatment followed by high-temperature argon annealing results in coal char particles with the desired porous structure, surface properties, and turbostratic nanodomains that deliver high reversible capacity and maintain good electrochemical performance at high rates up to 10C. Long-term cycling stability for 500 cycles can be achieved in cells comprising NMC cathodes at 1C with 73.2% capacity retention. In conclusion, this study sheds light on potential energy storage use cases for coal char outside its traditional utilization.

25 ENERGY STORAGE↗
DOE OSTI2020

Ending the Chase for a Perfect Binder: Role of Surface Chemistry Variation and its Influence on Silicon Anodes

In this work we examine the influence of the type of silicon source material (two milled and two plasma enhanced chemical vapor deposition) on the electrochemical performance of silicon-based anodes for Li-ion batteries. The four representative Si sources were previously identified in literature but have never been compared side by side, which is critical to understanding the wide variation in performance reported for silicon-based electrodes. These particles display unique surface features associated with surface oxides and residual precursor species (Si-N, Si-C, Si-H) which impact processability by changing interactions within the electrode slurry and the resulting electrochemical performance. These properties should be taken into consideration when utilizing “off-the-shelf” Si powders for investigations and would be good variables to explore to understand why certain chemistries display suitable performance, while others “don't work.”

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Stability, Combustion, and Compatibility of High-Viscosity Heavy Fuel Oil Blends with a Fast Pyrolysis Bio-Oil

Properties related to the combustion, stability, and compatibility of blends composed of high-viscosity heavy fuel oil (HFO) and highly acidic pyrolysis bio-oil were determined to assess the utility of bio-oil as a marine fuel. The addition of bio-oil was shown to be fully stable with HFO at blend levels up to 50 mass % for up to 2 weeks. Bio-oil concentrations as low as 5 mass % significantly reduced the viscosity of HFO at 25 and 50 °C. Aging studies at 50 and 90 °C showed that the HFO inhibited the polymerization of bio-oil. The heating value and lubricity showed a linear dependency with bio-oil content, and combustion quality was acceptable for blends containing up to 15% bio-oil. The highly acidic bio-oil was found to be corrosive to carbon steel, 2.25Cr-1Mo steel, and 409 stainless steels, but not 304L and 316L. When blended into HFO at levels less than 19 mass %, no measurable corrosion was observed on any of the steel materials, but a 50 mass % concentration produced low-to-moderate corrosion in the carbon steel, 2.25Cr-1Mo steel, and 409 stainless steel grades. The combination of good blend stability, polymerization inhibition, reduced viscosity, and acceptable compatibility for low blend levels suggests that bio-oils may be suitable for use as a marine fuel.

09 BIOMASS FUELS↗
DOE OSTI2020

Evaporation due to infrared heating and natural convection

The results obtained from a drying experiment under infrared heating are compared to those obtained from correlations for the mass transfer coefficients, which are commonly used to obtain evaporation rates for drying applications. It was shown that the mass transfer coefficients evaluated by natural convection correlations are approximately ten times lower than those measured under infrared (IR) exposure. In this work, an attempt to explain this discrepancy, which has been also observed in other studies and explained on the basis of thermal radiation effects, optical properties of NMP are presented and the implications of the IR and near infrared (NIR) spectrum on the thermal radiation effects and ensuing evaporation rates are discussed. The results show that expected raise in the film temperature, which would be due to the thermal radiation effects, cannot be used to describe the measured evaporation rates for this solvent. Therefore, this study provides important evaporation mass flux data, which cannot be predicted using traditional correlations, for the design of IR assisted drying systems used in membrane fabrication.

42 ENGINEERING↗
DOE OSTI2020

Understanding Binder–Silicon Interactions during Slurry Processing

The conformation of poly(acrylic acid) (PAA) as a function of shear during slurry processing to construct silicon-based anodes is elucidated via rheology-coupled ultra-small-angle neutron scattering (rheo-USANS). Rheo-USANS shows that PAA with encapsulated silicon exists as discrete aggregates that do not interact with one another. As a result, a well-connected matrix of silicon and carbon black dispersed in PAA does not exist; thus, the electrode is inhomogeneous. Raman mapping and X-ray photoelectron spectroscopy were used to confirm the electrode heterogeneity and further understand the cycling properties. These results are correlated to silicon surface chemistry to provide a pathway to making better electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Fabrication of films and coatings used to activate shear thickening, impact resistant electrolytes

A method of making a passively impact resistant composite electrolyte and separator layer includes providing a suspension composition including electrically non-conducting particles that enable shear thickening. The particles can have a polydispersity index of no greater than 0.1, an average particle size in a range of from 50 nm to 1 um, and an absolute zeta potential of greater than ±40 mV. A particle suspension solvent is provided for suspending the particles. The suspension composition is applied to a porous separator material. A portion of the particles and suspension solvent penetrate the pores and the remainder of the particles in the suspension composition are distributed across the surface of the separator material. The suspension solvent is evaporated from the separator material to provide a shear thickening particle loaded separator. A separator assembly and a passivated battery are also disclosed.

25 ENERGY STORAGE↗
DOE OSTI2020

Intrinsic Chemical Reactivity of Silicon Electrode Materials: Gas Evolution

In this work, we explore how the chemical reactivity toward an aprotic battery electrolyte changes as a function of lithium salt and silicon surface termination chemistry. The reactions are highly correlated, where one decomposition reaction leads to a subsequent decomposition reaction. We report the data show that the presence of silicon hydrides (SiH$_x$) promotes the formation of CO gas, while surface oxides SiO$_x$ drive the formation of CO 2 . The extent and rate of oxidation depend on the surface basicity of the SiO 2 surface species. The most acidic surfaces seem to hinder CO 2 generation but not the decomposition of the salt. Indeed, the presence of F-containing salts (LiPF 6 and LiTFSI) promotes the reactions between carbonate electrolyte and silicon surfaces. Surfaces with high Li content seem to be the most passivating to gassing reactions, pointing to a pathway to stabilize the interfaces during cell formation and assembly.

25 ENERGY STORAGE↗
DOE OSTI2019

Shear activated impact resistant electrolyte

A passively impact resistant composite electrolyte composition includes an electrolyte solvent, up to 6M of an electrolyte salt, and shear thickening ceramic particles having an outer surface. The shear thickening ceramic particles have an absolute zeta potential of greater than ±40 mV. The shear thickening ceramic particles have a polydispersity index of no greater than 0.1, and an average particle size of in a range of 50 nm to 1 um. The ceramic particles have bonded to the outer surface steric stabilizing polymers. The steric stabilizing polymers have a chain length of from 0.5 nm to 100 nm. A passively impact resistant laminated battery and a method of making the electrolyte composition are also disclosed.

Veith, Gabriel M.↗
DOE OSTI2019

Stabilized shear thickening electrolyte

A passively impact resistant composite electrolyte composition includes an aprotic electrolyte solvent, from 0.5 to 6M of an electrolyte salt, and shear thickening particles having a polydispersity index of no greater than 0.1, an average particle size in a range of 50 nm to 1 um, and an absolute zeta potential of greater than ±40 mV. The shear thickening particles have thereon an electrochemical double layer. The composition further includes a stabilizing surfactant. The stabilizing surfactant includes a first portion for adsorbing to the particles, and a second portion that is absorbed in the solvent. The length of the surfactant from the first portion to the second portion is greater than twice the thickness of the electrochemical double layer. Batteries and electrochemical devices incorporating the electrolyte composition are disclosed. Methods of making the electrolyte composition and of operating a battery are also disclosed.

Veith, Gabriel M.↗
DOE OSTI2019

Microbially-mediated method for synthesis of metal chalcogenide nanoparticles

A method for producing metal chalcogenide nanoparticles, the method comprising: (i) producing hydrogen chalcogenide-containing vapor from a microbial source, wherein said microbial source comprises: (a) chalcogen-reducing microbes capable of producing hydrogen chalcogenide vapor from a chalcogen-containing source; (b) a culture medium suitable for sustaining said chalcogen-reducing microbes; (c) at least one chalcogen-containing compound that can be converted to hydrogen chalcogenide vapor by said chalcogen-reducing microbes; and (d) at least one nutritive compound that provides donatable electrons to said chalcogen-reducing microbes during consumption of the nutritive compound by said chalcogen-reducing microbes; and (ii) directing said hydrogen chalcogenide-containing vapor into a metal-containing solution comprising a metal salt dissolved in a solvent to produce metal chalcogenide nanoparticles in said solution, wherein said chalcogen is sulfur or selenium, and said chalcogenide is sulfide or selenide, respectively. The invention is also directed to metal chalcogenide nanoparticle compositions produced as above and having distinctive properties.

36 MATERIALS SCIENCE↗