Engineering Papers⌕ Search

Engineering topics

Aloni, Shaul

Publications and source records attributed to Aloni, Shaul.

At least 37 records · Page 2

Anisotropic 2D excitons unveiled in organic-inorganic quantum wells

Here we report that two-dimensional (2D) excitons arise from electron-hole confinement along one spatial dimension. Such excitations are often described in terms of Frenkel or Wannier limits according to the degree of exciton spatial localization and the surrounding dielectric environment. In hybrid material systems, such as the 2D perovskites, the complex underlying interactions lead to excitons of an intermediate nature, whose description lies somewhere between the two limits, and a better physical description is needed. Here, we explore the photophysics of a tuneable materials platform where covalently bonded metal-chalcogenide layers are spaced by organic ligands that provide confinement barriers for charge carriers in the inorganic layer. We consider self-assembled, layered bulk silver benzeneselenolate, [AgSePh] ∞ , and use a combination of transient absorption spectroscopy and ab initio GW plus Bethe-Salpeter equation calculations. We demonstrate that in this non-polar dielectric environment, strongly anisotropic excitons dominate the optical transitions of [AgSePh] ∞ . We find that the transient absorption measurements at room temperature can be understood in terms of low-lying excitons confined to the AgSe planes with in-plane anisotropy, featuring anisotropic absorption and emission. Finally, we present a pathway to control the exciton behaviour by changing the chalcogen in the material lattice. Our studies unveil unexpected excitonic anisotropies in an unexplored class of tuneable, yet air-stable, hybrid quantum wells, offering design principles for the engineering of an ordered, yet complex dielectric environment and its effect on the excitonic phenomena in such emerging materials.

36 MATERIALS SCIENCE↗

Electrochemically scrambled nanocrystals are catalytically active for CO 2 -to-multicarbons

Significance The electrocatalytic conversion of CO 2 to value-added products, especially valuable multicarbon products, is a pathway toward sustainable formation of chemicals and fuels typically derived from fossil fuels, while mitigating CO 2 emissions. Fundamental understanding and development of more efficient catalysts for this reaction require deep investigation into structures with high intrinsic activity, which are limited at present. This work comprehensively investigates a dynamic copper nanoparticle ensemble catalyst that significantly improves intrinsic activity of copper for multicarbon formation. Through concerted ex situ and in situ characterization techniques, it illustrates an electrochemically induced fusion of copper nanoparticles that result in a catalytically active disordered structure, motivating closer study of disordered metal nanostructures for C–C coupling electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Resolving Enhanced Mn 2+ Luminescence near the Surface of CsPbCl 3 with Time-Resolved Cathodoluminescence Imaging

Mn 2+ doping of lead halide perovskites has garnered recent interest because it produces stable orange luminescence in tandem with perovskite emission. In this work, we observe enhanced Mn 2+ luminescence at the edges of Mn 2+ -doped CsPbCl 3 perovskite microplates and suggest an explanation for its origin using the high spatiotemporal resolution of time-resolved cathodoluminescence (TRCL) imaging. We reveal two luminescent decay components that we attribute to two different Mn 2+ populations. While each component appears to be present both near the surface and in the bulk, the origin of the intensity variation stems from a higher proportion of the longer lifetime component near the perovskite surface. Overall, we suggest that this higher emission is caused by an increased probability of electron-hole recombination on Mn 2+ near the perovskite surface due to an increased trap concentration there. This observation suggests that such surface features have yet untapped potential to enhance emissive properties via control of surface-to-volume ratio.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled Assembly of Upconverting Nanoparticles for Low-Threshold Microlasers and Their Imaging in Scattering Media

Micron-sized lasers fabricated from upconverting nanoparticles (UCNP) coupled to whispering gallery mode (WGM) microresonators can exhibit continuous-wave anti-Stokes lasing useful for tracking cells, environmental sensing, and coherent stimulation of biological activity. The integration of these microlasers into organisms and microelectronics requires even smaller diameters, however, which raises threshold pump powers beyond practical limits for biological applications. To meet the need for low lasing thresholds and high fidelity fabrication methods, we use correlative optical and electron microscopy to uncover the nanoparticle assembly process and structural factors that determine efficient upconverted lasing. We show that 5 μm microspheres with controlled submonolayer UCNP coatings exhibit, on average, 25-fold lower laser thresholds (1.7 ± 0.7 kW/cm 2 ) compared to the mean values of the lowest threshold UCNP lasers, and variability is reduced 30-fold. WGMs are observed in the upconversion spectra for TiO 2 -coated microspheres as small as 3 μm, a size at which optical losses had previously prevented such observations. Finally, we demonstrate that the WGM signatures of these upconverting microlasers can be imaged and distinguished through tissue-mimicking phantoms. These advances will enable the fabrication of more efficient upconverting lasers for imaging, sensing, and actuation in optically complex environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-assembly and metal-directed assembly of organic semiconductor aerogels and conductive carbon nanofiber aerogels with controllable nanoscale morphologies

A versatile and highly tunable synthesis for nanofiber aerogels based on the n-type organic semiconductor perylene tetracarboxylic diimide (PTCDI) is presented. PTCDI nanofiber aerogels are demonstrated to incorporate the organic semiconductor into a high surface area and porous morphology and can also be graphitized to synthesize carbon nanofiber (CNF) aerogels by thermal annealing. Using this approach, CNF aerogels with variable density and crystallinity are synthesized. Furthermore, by incorporating metal salts into the synthesis, metal-directed assembly yields a variety of nanoscale morphologies. The selection of post-synthesis thermal treatment can result in metal-directed assembly of PTCDI aerogels, low crystallinity graphitic aerogels decorated with metal nanoparticles, or highly crystalline graphitic aerogels with controllable nanoscale morphologies. The high surface area and porosity afforded by the aerogel morphology coupled with the intrinsic properties of PTCDI or CNFs is important for improving their performance in a number of applications including energy storage and catalysis.

36 MATERIALS SCIENCE↗

Blue-light-emitting color centers in high-quality hexagonal boron nitride

Light emitters in wide-band-gap semiconductors are of great fundamental interest and have potential as optically addressable qubits. Here we describe a unique color center in high-quality hexagonal boron nitride (h-BN) with a sharp emission line at 435 nm. The emitters are activated and deactivated by electron beam irradiation and have spectral and temporal characteristics consistent with atomic color centers weakly coupled to lattice vibrations. The emitters are conspicuously absent from commercially available h-BN and are present in only ultrahigh-quality h-BN grown using a high-pressure, high-temperature Ba-B-N flux/solvent, suggesting that these emitters originate from impurities or related defects specific to this unique synthetic route. Lastly, our results imply that the light emission is activated and deactivated by electron beam manipulation of the charge state of an impurity-defect complex.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tunable electronic structure in gallium chalcogenide van der Waals compounds

Transition-metal monochalcogenides comprise a class of two-dimensional materials with electronic band gaps that are highly sensitive to material thickness and chemical composition. Here, we explore the tunability of the electronic excitation spectrum in GaSe by using angle-resolved photoemission spectroscopy. The electronic structure of the material is modified by in situ potassium deposition as well as by forming GaS x Se 1- x alloy compounds. We find that potassium-dosed samples exhibit a substantial change of the dispersion around the valence-band maximum (VBM). The observed band dispersion resembles that of a single tetralayer and is consistent with a transition from the direct-gap character of the bulk to the indirect-gap character expected for monolayer GaSe. Upon alloying with sulfur, we observe a phase transition from AB to AA' stacking. Alloying also results in a rigid energy shift of the VBM towards higher binding energies, which correlates with a blueshift in the luminescence. The increase of the band gap upon sulfur alloying does not appear to change the dispersion or character of the VBM appreciably, implying that it is possible to engineer the gap of these materials while maintaining their salient electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shape-controlled synthesis and in situ characterisation of anisotropic Au nanomaterials using liquid cell transmission electron microscopy

Understanding the mechanisms behind crystal nucleation and growth is a fundamental requirement for the design and production of bespoke nanomaterials with controlled sizes and morphologies. In this work, we select gold (Au) nanoparticles as the model system for our study due to their representative applications in biology, electronics and optoelectronics. We investigate the radiation-induced in situ growth of gold (Au) particles using liquid cell transmission electron microscopy (LCTEM) and study the growth kinetics of non-spherical Au structures. Under controlled electron fluence, liquid flow rate and Au 3+ ion supply, we show the favoured diffusion-limited growth of multi-twinned nascent Au seed particles into branched structures when using thin liquid cells (100 nm and 250 nm) in LCTEM, whereas faceted structures (e.g., spheres, rods, and prisms) formed when using a 1 μm thick liquid cell. In addition, we observed that anisotropic Au growth could be modulated by Au-binding amyloid fibrils, which we ascribe to their capability to regulate Au 3+ ion diffusion and mass transfer in solution. We anticipate that this study will provide new perspectives on the shape-controlled synthesis of anisotropic metallic nanomaterials using LCTEM.

36 MATERIALS SCIENCE↗

How Substitutional Point Defects in Two-Dimensional WS 2 Induce Charge Localization, Spin–Orbit Splitting, and Strain

Control of impurity concentrations in semiconducting materials is essential to device technology. Because of their intrinsic confinement, the properties of two-dimensional semiconductors such as transition metal dichalcogenides (TMDs) are more sensitive to defects than traditional bulk materials. The technological adoption of TMDs is dependent on the mitigation of deleterious defects and guided incorporation of functional foreign atoms. The first step toward impurity control is the identification of defects and assessment of their electronic properties. Here, we present a comprehensive study of point defects in monolayer tungsten disulfide (WS 2 ) grown by chemical vapor deposition using scanning tunneling microscopy/spectroscopy, CO-tip noncontact atomic force microscopy, Kelvin probe force spectroscopy, density functional theory, and tight-binding calculations. We observe four different substitutional defects: chromium (Cr W ) and molybdenum (Mo W ) at a tungsten site, oxygen at sulfur sites in both top and bottom layers (O S top/bottom), and two negatively charged defects (CD type I and CD type II). Their electronic fingerprints unambiguously corroborate the defect assignment and reveal the presence or absence of in-gap defect states. Cr W forms three deep unoccupied defect states, two of which arise from spin-orbit splitting. The formation of such localized trap states for Cr W differs from the Mo W case and can be explained by their different d shell energetics and local strain, which we directly measured. Utilizing a tight-binding model the electronic spectra of the isolectronic substitutions O S and Cr W are mimicked in the limit of a zero hopping term and infinite on-site energy at a S and W site, respectively. The abundant CDs are negatively charged, which leads to a significant band bending around the defect and a local increase of the contact potential difference. In addition, CD-rich domains larger than 100 nm are observed, causing a work function increase of 1.1 V. While most defects are electronically isolated, we also observed hybrid states formed between CrW dimers. Finally, the important role of charge localization, spin-orbit coupling, and strain for the formation of deep defect states observed at substitutional defects in WS 2 as reported here will guide future efforts of targeted defect engineering and doping of TMDs.

2D materials↗

Identifying substitutional oxygen as a prolific point defect in monolayer transition metal dichalcogenides

Chalcogen vacancies are generally considered to be the most common point defects in transition metal dichalcogenide (TMD) semiconductors because of their low formation energy in vacuum and their frequent observation in transmission electron microscopy studies. Consequently, unexpected optical, transport, and catalytic properties in 2D-TMDs have been attributed to in-gap states associated with chalcogen vacancies, even in the absence of direct experimental evidence. Here, we combine low-temperature non-contact atomic force microscopy, scanning tunneling microscopy and spectroscopy, and state-of-the-art ab initio density functional theory and GW calculations to determine both the atomic structure and electronic properties of an abundant chalcogen-site point defect common to MoSe 2 and WS 2 monolayers grown by molecular beam epitaxy and chemical vapor deposition, respectively. Surprisingly, we observe no in-gap states. Our results strongly suggest that the common chalcogen defects in the described 2D-TMD semiconductors, measured in vacuum environment after gentle annealing, are oxygen substitutional defects, rather than vacancies.

36 MATERIALS SCIENCE↗

Ultrahigh-Temperature Ceramic Aerogels

In this work, we demonstrate the synthesis of high-surface-area, low-density refractory aerogels. The monolithic hafnium boride (HfB 2 ) and zirconium boride (ZrB 2 ) aerogels are prepared via borothermal reduction of precursor hafnia and zirconia aerogels, respectively, consisting of a fine mixture of boron nanoparticles and the metal oxide. This precursor boron–metal oxide (B–MO 2 ) composite aerogel was synthesized by modifying the pure ethanol solvent typically used in the epoxide-initiated sol–gel synthesis of metal oxide aerogels with an ethanolic boron nanoparticle suspension. After reduction, precursor aerogels are converted to metal boride aerogels containing primary particles in the sub-100 nm regime. The relative densities of the HfB 2 and ZrB 2 aerogels are 3 and 7%, respectively, and could be tailored by simply changing the density of the precursor aerogels via modifying the reagent concentrations or the drying conditions. Thermal conductivities of the ZrB 2 monoliths ranged from 0.18 to 0.33 W/(m K). The surface areas of the HfB 2 and ZrB 2 aerogels were 10 and 19 m 2 /g, respectively. Lastly, successful reduction of the aerogels to the diboride phase was confirmed by X-ray diffraction.

36 MATERIALS SCIENCE↗

Alternative Stacking Sequences in Hexagonal Boron Nitride

The relative orientation of successive sheets, i.e. the stacking sequence, in layered two-dimensional materials is central to the electronic, thermal, and mechanical properties of the material. Often different stacking sequences have comparable cohesive energy, leading to alternative stable crystal structures. Here we theoretically and experimentally explore different stacking sequences in the van der Waals bonded material hexagonal boron nitride (h-BN). We examine the total energy, electronic bandgap, and dielectric response tensor for five distinct high symmetry stacking sequences for both bulk and bilayer forms of h-BN. Two sequences, the generally assumed AA' sequence and the relatively unknown (for h-BN) AB (Bernal) sequence, are predicted to have comparably low energy. Lastly, we present a scalable modified chemical vapor deposition method that produces large flakes of virtually pure AB stacked h-BN; this new material complements the generally available AA' stacked h-BN.

36 MATERIALS SCIENCE↗

Bright sub-20-nm cathodoluminescent nanoprobes for electron microscopy

Electron microscopy has been integral in our understanding of complex biological systems. Although electron microscopy reveals cellular morphology with nanoscale resolution, it does not provide information on the location of different types of proteins. An electron-microscopy-based bioimaging technology capable of localizing individual proteins and resolving protein-protein interactions with respect to cellular ultrastructure would provide important insights into the molecular biology of a cell. In this report, we synthesize small lanthanide-doped nanoparticles and measure the absolute photon emission rate of individual nanoparticles resulting from a given electron excitation flux (cathodoluminescence). Our results indicate that the optimization of nanoparticle composition, synthesis protocols and electron imaging conditions can lead to sub-20-nm nanolabels that would enable high signal-to-noise localization of individual biomolecules within a cellular context. In ensemble measurements, these labels exhibit narrow spectra of nine distinct colours, so the imaging of biomolecules in a multicolour electron microscopy modality may be possible.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Very High Refractive Index Transition Metal Dichalcogenide Photonic Conformal Coatings by Conversion of ALD Metal Oxides

Materials for nanophotonic devices ideally combine ease of deposition, very high refractive index, and facile pattern formation through lithographic templating and/or etching. In this work, we present a scalable method for producing high refractive index WS 2 layers by chemical conversion of WO 3 synthesized via atomic layer deposition (ALD). These conformal nanocrystalline thin films demonstrate a surprisingly high index of refraction (n > 3.9), and structural fidelity compatible with lithographically defined features down to ~10 nm. Although this process yields highly polycrystalline films, the optical constants are in agreement with those reported for single crystal bulk WS 2 . Subsequently, we demonstrate three photonic structures - first, a two-dimensional hole array made possible by patterning and etching an ALD WO 3 thin film before conversion, second, an analogue of the 2D hole array first patterned into fused silica before conformal coating and conversion, and third, a three-dimensional inverse opal photonic crystal made by conformal coating of a self-assembled polystyrene bead template. Furthermore these results can be trivially extended to other transition metal dichalcogenides, thus opening new opportunities for photonic devices based on high refractive index materials.

36 MATERIALS SCIENCE↗

Effects of Defects on Band Structure and Excitons in WS 2 Revealed by Nanoscale Photoemission Spectroscopy

Two-dimensional materials with engineered composition and structure will provide designer materials beyond conventional semiconductors. Yet, the potentials of defect engineering remain largely untapped, because it hinges on a precise understanding of electronic structure and excitonic properties, which are not yet predictable by theory alone. In this report, we use correlative, nanoscale photoemission spectroscopy to visualize how local introduction of defects modifies electronic and excitonic properties of two-dimensional materials at the nanoscale. As a model system, we study chemical vapor deposition grown monolayer WS 2 , a prototypical, direct gap, two-dimensional semiconductor. By cross-correlating nanoscale angle-resolved photoemission spectroscopy, core level spectroscopy, and photoluminescence, we unravel how local variations in defect density influence electronic structure, lateral band alignment, and excitonic phenomena in synthetic WS 2 monolayers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large spin-orbit splitting of deep in-gap defect states of engineered sulfur vacancies in monolayer WS 2

Structural defects in 2D materials offer an effective way to engineer new material functionalities beyond conventional doping in semiconductors. Specifically, deep in-gap defect states of chalcogen vacancies have been associated with intriguing phenomena in monolayer transition metal dichalcogenides (TMDs). Here, we report the direct experimental correlation of the atomic and electronic structure of a sulfur vacancy in monolayer WS 2 by a combination of CO-tip non-contact atomic force microscopy (nc-AFM) and scanning tunneling microscopy (STM). Sulfur vacancies, which are absent in as-grown samples, were deliberately created by annealing in vacuum. Two energetically narrow unoccupied defect states of the vacancy provide a unique fingerprint of this defect. Direct imaging of the defect orbitals by STM and state-of-the-art GW calculations reveal that the large splitting of 252 meV between these defect states is induced by spin-orbit coupling. The controllable incorporation and potential decoration of chalcogen vacancies provide a new route to tailor the optical, catalytic and magnetic properties of TMDs.

74 ATOMIC AND MOLECULAR PHYSICS↗

Cathodoluminescence-based nanoscopic thermometry in a lanthanide-doped phosphor

Crucial to analyze phenomena as varied as plasmonic hot spots and the spread of cancer in living tissue, nanoscale thermometry is challenging: probes are usually larger than the sample under study, and contact techniques may alter the sample temperature itself. Many photostable nanomaterials whose luminescence is temperature-dependent, such as lanthanide-doped phosphors, have been shown to be good non-contact thermometric sensors when optically excited. Using such nanomaterials, in this work we accomplished the key milestone of enabling far-field thermometry with a spatial resolution that is not diffraction-limited at readout. We explore thermal effects on the cathodoluminescence of lanthanide-doped NaYF$_4$ nanoparticles. Whereas cathodoluminescence from such lanthanide-doped nanomaterials has been previously observed, here we use quantitative features of such emission for the first time towards an application beyond localization. We demonstrate a thermometry scheme that is based on cathodoluminescence lifetime changes as a function of temperature that achieves $\sim$ 30 mK sensitivity in sub-$\mu$m nanoparticle patches. The scheme is robust against spurious effects related to electron beam radiation damage and optical alignment fluctuations. We foresee the potential of single nanoparticles, of sheets of nanoparticles, and also of thin films of lanthanide-doped NaYF$_4$ to yield temperature information via cathodoluminescence changes when in the vicinity of a sample of interest; the phosphor may even protect the sample from direct contact to damaging electron beam radiation. Cathodoluminescence-based thermometry is thus a valuable novel tool towards temperature monitoring at the nanoscale, with broad applications including heat dissipation in miniaturized electronics and biological diagnostics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗