Engineering Papers⌕ Search

Engineering topics

Aloni, Shaul

Publications and source records attributed to Aloni, Shaul.

At least 19 records

Anion and Cation Migration at 2D/3D Halide Perovskite Interfaces

Here, this study explores the ionic dynamics in 2D/3Dperovskite solar cells, which are known for their improved efficiency and stability. The focus is on the impact of halide choice in 3D perovskites treated with phenethylammonium halide salts (PEAX, X = Br and I). Our findings reveal that light and heat drive ionic migration in these structures, with PEA + species diffusing into the 3D film in PEABr-treated samples. Mixed-halide 3D perovskites show halide interdiffusion, with bromine migrating to the surface and iodine diffusing into the film. Cathodoluminescence microscopy reveals localized 2Dphases on the 3D perovskite, which become more evenly distributed after thermal treatment. Both PEAX salts enhance the performance of photovoltaic devices. This improvement is attributed to the passivation capabilities of the salts themselves and their respective Ruddlesden–Popper (RP) phases. Annealed PEAI-treated devices show a better balance between efficiency and statistical distribution of photovoltaic parameters.

25 ENERGY STORAGE↗

Organic Matrix Derived from Host–Microbe Interplay Contributes to Pathological Renal Biomineralization

Matrix stones are a rare form of kidney stones. They feature a high percentage of hydrogel-like organic matter, and their formation is closely associated with urinary tract infections. Herein, comprehensive materials and biochemical approaches were taken to map the organic-inorganic interface and gather insights into the host-microbe interplay in pathological renal biomineralization. Surgically extracted soft and slimy matrix stones were examined using micro-X-ray computed tomography and various microspectroscopy techniques. Higher-mineral-density laminae were positive for calcium-bound Alizarin red. Lower-mineral-density laminae revealed periodic acid-Schiff-positive organic filamentous networks of varied thickness. These organic filamentous networks, which featured a high polysaccharide content, were enriched with zinc, carbon, and sulfur elements. Neutrophil extracellular traps (NETs) along with immune response-related proteins, including calprotectin, myeloperoxidase, CD63, and CD86, also were identified in the filamentous networks. Expressions of NETs and upregulation of polysaccharide-rich mucin secretion are proposed as a part of the host immune defense to "trap" pathogens. These host-microbe derived organic matrices can facilitate heterogeneous nucleation and precipitation of inorganic particulates, resulting in macroscale aggregates known as "matrix stones". These insights into the plausible aggregation of constituents through host-microbe interplay underscore the unique "double-edged sword" effect of the host immune response to pathogens and the resulting renal biominerals.

59 BASIC BIOLOGICAL SCIENCES↗

Codesign of an integrated metal–insulator–semiconductor photocathode for photoelectrochemical reduction of CO 2 to ethylene

Photoelectrochemical carbon-dioxide reduction (PEC CO 2 R) is a potentially attractive means for producing chemicals and fuels using sunlight, water, and carbon dioxide; however, this technology is in its infancy. To date, most studies of PEC CO 2 R have reported products containing one carbon atom (C 1 products) but the production of valuable products containing two or more carbons (C 2+ products), such as ethylene, ethanol, etc., is rarely demonstrated. Metal–semiconductor–insulator (MIS) photocathode/catalyst structures offer a promising approach for this purpose, since they integrate the functions of light absorption, charge separation, and catalysis. In this study, we have investigated a Cu/TiO 2 /p-Si photocathode/catalyst structure with the aim of establishing the effects of semiconductor–insulator interactions on the performance of the photocathode and the influence of the direction of illumination of the MIS structure on the total current density and the distribution of products formed by on the Cu catalyst. Here, we have also examined the influence of ionomer coatings deposited on the Cu surface on the total current density and the distribution of products formed. A major finding is that for a fixed Cu potential the distribution of products formed by PEC CO 2 R are the same, irrespective of the direction of illumination, and are identical to those obtained by electrochemical reduction of CO 2 (EC CO 2 R). Another important finding is that the total current density and the faradaic efficiency to ethylene are enhanced significantly by deposition of a thin bilayer of Sustainion/Nafion onto the surface of the Cu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carrier and Phonon Dynamics in Multilayer WSe 2 Captured by Extreme Ultraviolet Transient Absorption Spectroscopy

Carrier and phonon dynamics in a multilayer WSe2 film are captured by extreme ultraviolet (XUV) transient absorption (TA) spectroscopy at the W N 6,7 , W O 2,3 , and Se M 4,5 edges (30–60 eV). After the broadband optical pump pulse, the XUV probe directly reports on occupations of optically excited holes and phonon-induced band renormalizations. Here, when compared with density functional theory calculations, XUV transient absorption due to holes is identified below the W O 3 edge whereas signals at the Se M 4,5 edges are dominated by phonon dynamics. Therein, 0.4 ps hole relaxation time, 1.5 ps carrier recombination time, and 1.7 ps phonon heating time are extracted. The acquisition of hole and phonon-induced signals in a single experiment can facilitate the investigation of the correlations between electron and phonon dynamics. Furthermore, the simultaneous observation of signals from different elements can be further extended to explore photochemical processes in multilayers and alloys, thereby providing key information for their applications in electronics, photocatalysts, and spintronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal–ceramic composite structures for fabrication of high power density plasmonic devices

The recent decade brought many advances to plasmonics, but high power density plasmonic antennas designed to behave as heaters or operate in high temperature environments are still facing material stability challenges preventing their ultimate use. Gold has been the optimal choice among plasmonic materials but experiences morphology changes at temperature that result in device efficiency reduction and failure. Bulk titanium nitride has been explored as a solution but has deal-breaking tradeoffs in device quality factor. In this paper, we explore via proof-of-concept the use of a metal–ceramic composite structure to determine whether a bulk Au nanorod can provide strong plasmonic resonances while coated with an ultrathin conformal layer of titanium nitride or silica to provide morphological stability and sufficient plasmonic activity without excessive resonance quality degradation. We show SEM-level morphological stability for temperatures up to 500 °C with coatings below 4 nm. Computer modeling suggests the ultrathin titanium nitride has detrimental effects on the strong plasmonic resonances of a Au nanorod. Here, we then looked into other possible coatings for solutions to stabilize high power density plasmonic antennas including plasmonic oxides, metal adhesion layers, and silica, the latter appearing to be the best option while lowering the overall peak electric field intensity, the silica increases the electric field intensity at its boundary.

36 MATERIALS SCIENCE↗

Tuning colour centres at a twisted hexagonal boron nitride interface

The colour centre platform holds promise for quantum technologies, and hexagonal boron nitride has attracted attention due to the high brightness and stability, optically addressable spin states and wide wavelength coverage discovered in its emitters. However, its application is hindered by the typically random defect distribution and complex mesoscopic environment. In this study, employing cathodoluminescence, we demonstrate on-demand activation and control of colour centre emission at the twisted interface of two hexagonal boron nitride flakes. Further, we show that colour centre emission brightness can be enhanced by two orders of magnitude by tuning the twist angle. Additionally, by applying an external voltage, nearly 100% brightness modulation is achieved. Our ab initio GW and GW plus Bethe–Salpeter equation calculations suggest that the emission is correlated to nitrogen vacancies and that a twist-induced moiré potential facilitates electron–hole recombination. This mechanism is further exploited to draw nanoscale colour centre patterns using electron beams.

36 MATERIALS SCIENCE↗

Hard Ferromagnetism Down to the Thinnest Limit of Iron-Intercalated Tantalum Disulfide

Two-dimensional (2D) magnetic crystals hold promise for miniaturized and ultralow power electronic devices that exploit spin manipulation. In these materials, large, controllable magnetocrystalline anisotropy (MCA) is a prerequisite for the stabilization and manipulation of long-range magnetic order. In known 2D magnetic crystals, relatively weak MCA typically results in soft ferromagnetism. Furthermore, we demonstrate that ferromagnetic order persists down to the thinnest limit of Fe x TaS 2 (Fe-intercalated bilayer 2H-TaS 2 ) with giant coercivities up to 3 T. We prepare Fe-intercalated TaS 2 by chemical intercalation of van der Waals-layered 2H-TaS 2 crystals and perform variable-temperature transport, transmission electron microscopy, and confocal Raman spectroscopy measurements to shed new light on the coupled effects of dimensionality, degree of intercalation, and intercalant order/disorder on the hard ferromagnetic behavior of Fe x TaS 2 . More generally, we show that chemical intercalation gives access to a rich synthetic parameter space for low-dimensional magnets, in which magnetic properties can be tailored by the choice of the host material and intercalant identity/amount, in addition to the manifold distinctive degrees of freedom available in atomically thin, van der Waals crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of ultrathin suspended membranes from atomic layer deposition films

In this report, ultrathin films suspended as freestanding membranes are critical to many microelectronic and materials science applications. However, fabrication methods are currently limited in either their flexibility, due to material selectivity issues during the final membrane release, or their scalability. Here, we demonstrate a novel fabrication process for suspending ultrathin films with thicknesses as low as 4 nm and lateral dimensions up to 20 x 1000 μm from a variety of materials grown by atomic layer deposition. A silicon nitride membrane serves as the support for a sacrificial polymer layer and an ultrathin atomic layer deposition film which, after plasma etching, will form the membrane. The high chemical selectivity between atomic layer deposition-grown transition metal nitrides and oxides and the sacrificial polymer means that ultrathin films of a variety of materials can be released without damage using a single process. Electrically conductive titanium nitride membranes can be produced by this method and are of significant interest for electron microscopy applications. Electron transparency of titanium nitride membranes was found to be ~14% higher than silicon nitride of the same thickness, and of similar conductivity to graphite, meaning that ultrathin, conductive, and electron transparent membranes can be fabricated at scale. These membranes are ideal supports for electron and photon characterization techniques, as well as microelectromechanical system applications that require a conductive membrane.

36 MATERIALS SCIENCE↗

Coupled valence carrier and core-exciton dynamics in WS 2 probed by few-femtosecond extreme ultraviolet transient absorption spectroscopy

Few-femtosecond extreme ultraviolet (XUV) transient absorption spectroscopy, performed with optical 500-1000 nm supercontinuum and broadband XUV pulses (30-50 eV), simultaneously probes dynamics of photoexcited carriers in WS$_{2}$ at the W O$_3$ edge (37-45 eV) and carrier-induced modifications of core-exciton absorption at the W N$_{6,7}$ edge (32-37 eV). Access to continuous core-to-conduction band absorption features and discrete core-exciton transitions in the same XUV spectral region in a semiconductor provides a novel means to investigate the effect of carrier excitation on core-exciton dynamics. The core-level transient absorption spectra, measured with either pulse arriving first to explore both core-level and valence carrier dynamics, reveal that core-exciton transitions are strongly influenced by the photoexcited carriers. A $1.2\pm0.3$ ps hole-phonon relaxation time and a $3.1\pm0.4$ ps carrier recombination time are extracted from the XUV transient absorption spectra from the core-to-conduction band transitions at the W O$_{3}$ edge. Global fitting of the transient absorption signal at the W N$_{6,7}$ edge yields $\sim 10$ fs coherence lifetimes of core-exciton states and reveals that the photoexcited carriers, which alter the electronic screening and band filling, are the dominant contributor to the spectral modifications of core-excitons and direct field-induced changes play a minor role. This work provides a first look at the modulations of core-exciton states by photoexcited carriers and advances our understanding of carrier dynamics in metal dichalcogenides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Methods for tuning plasmonic and photonic optical resonances in high surface area porous electrodes

Abstract Surface plasmons have found a wide range of applications in plasmonic and nanophotonic devices. The combination of plasmonics with three-dimensional photonic crystals has enormous potential for the efficient localization of light in high surface area photoelectrodes. However, the metals traditionally used for plasmonics are difficult to form into three-dimensional periodic structures and have limited optical penetration depth at operational frequencies, which limits their use in nanofabricated photonic crystal devices. The recent decade has seen an expansion of the plasmonic material portfolio into conducting ceramics, driven by their potential for improved stability, and their conformal growth via atomic layer deposition has been established. In this work, we have created three-dimensional photonic crystals with an ultrathin plasmonic titanium nitride coating that preserves photonic activity. Plasmonic titanium nitride enhances optical fields within the photonic electrode while maintaining sufficient light penetration. Additionally, we show that post-growth annealing can tune the plasmonic resonance of titanium nitride to overlap with the photonic resonance, potentially enabling coupled-phenomena applications for these three-dimensional nanophotonic systems. Through characterization of the tuning knobs of bead size, deposition temperature and cycle count, and annealing conditions, we can create an electrically- and plasmonically-active photonic crystal as-desired for a particular application of choice.

36 MATERIALS SCIENCE↗

Graphene oxide/metal nanocrystal multilaminates the atomic limit for safe, selective hydrogen storage

Various embodiments of the invention describe an environmentally stable, and exceptionally dense hydrogen storage (6.5 wt % and 0.105 kg H2/L in the total composite, 7.56 wt % in Mg) using atomically thin and gas-selective reduced graphene oxide sheets as encapsulants. Other approaches to protecting reactive materials involve energy intensive introduction of considerable amounts of inactive, protective matrix which compromises energy density. However, these multilaminates are able to deliver exceptionally dense hydrogen storage far-exceeding 2020 DOE target metrics for gravimetric capacity (5.5 wt %), and ultimate full-fleet volumetric targets (0.070 kg H 2 /L) for fuel cell electric vehicles. Methods of stabilizing reactive nanocrystalline metals in zero-valency also has wide-ranging applications for batteries, catalysis, encapsulants, and energetic materials.

Urban, Jeffrey J.↗

Localization and reduction of superconducting quantum coherent circuit losses

Quantum sensing and computation can be realized with superconducting microwave circuits. Qubits are engineered quantum systems of capacitors and inductors with non-linear Josephson junctions. They operate in the single-excitation quantum regime, photons of $27 \mu$eV at 6.5 GHz. Quantum coherence is fundamentally limited by materials defects, in particular atomic-scale parasitic two-level systems (TLS) in amorphous dielectrics at circuit interfaces.[1] The electric fields driving oscillating charges in quantum circuits resonantly couple to TLS, producing phase noise and dissipation. We use coplanar niobium-on-silicon superconducting resonators to probe decoherence in quantum circuits. By selectively modifying interface dielectrics, we show that most TLS losses come from the silicon surface oxide, and most non-TLS losses are distributed throughout the niobium surface oxide. Through post-fabrication interface modification we reduced TLS losses by 85% and non-TLS losses by 72%, obtaining record single-photon resonator quality factors above 5 million and approaching a regime where non-TLS losses are dominant. [1]M\"uller, C., Cole, J. H. & Lisenfeld, J. Towards understanding two-level-systems in amorphous solids: insights from quantum circuits. Rep. Prog. Phys. 82, 124501 (2019)

Altoé, M Virginia P↗

Electron beam-induced nanopores in Bernal-stacked hexagonal boron nitride

Controlling the size and shape of nanopores in two-dimensional materials is a key challenge in applications such as DNA sequencing, sieving, and quantum emission in artificial atoms. Here, we investigate experimentally and theoretically triangular vacancies in (unconventional) Bernal-stacked AB-h-BN formed using a high-energy electron beam. Due to the geometric configuration of AB-h-BN, triangular pores in different layers are aligned, and their sizes are controlled by the duration of the electron irradiation. Interlayer covalent bonding at the vacancy edge is not favored, as opposed to what occurs in the more common AA'-stacked BN. A variety of monolayer, concentric and bilayer pores in bilayer AB-h-BN are observed in high-resolution transmission electron microscopy and characterized using ab initio simulations. Bilayer pores in AB-h-BN are commonly formed, and grow without breaking the bilayer character. Nanopores in AB-h-BN exhibit a wide range of electronic properties, ranging from half-metallic to non-magnetic and magnetic semiconducting. Therefore, because of the controllability of the pore size, the electronic structure is also highly controllable in these systems, and can potentially be tuned for particular applications.

2D materials↗