Engineering PapersSearch

SEARCH · Engineering Papers

Results for “zeta potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Zeta potential control for electrophoresis cells

Zeta potential arises from fact that ions tend to be adsorbed on surface of cell walls. This potential interfaces with electric field sensed by migrating particles and degrades resolution of separation. By regulating sign and magnitude of applied potential induced charge can be used to increase or decrease effective wall zeta potential.

Fogal, G. L.

Investigation of the influence of the zeta-potential on the filtration rate in the presence of collectors

The value of the zeta-potential does not have an explicit effect, which is expressed by a simple math correlation, on filtration rate when a solution of the tested collector is filtered through a cake prepared under standard conditions from the examined particulate material. The zeta-potential measurements and filtration tests were carried out on silica and galena with solutions contg. a cationic container ANP and Et xanthane, resp. at PH = 6.5, varying concentration of the agent (0-2500 g/ton), and under a vacuum of 100 to 600 mm Hg.

Provirnina, E. V.

Zeta potential in ceramic industry

Deflocculation, electrical conductivity and zeta potential (ZP) are studied for the addition of 0 to 10000 ppm Na2SiO3 deflocculator to slips obtained from three argillaceous materials (kaolin d'Arvor, ball clay Hyplas 64, and/or Granger Clay No. 10). The quantity of Na2SO3 required to deflocculate a slip is independent of the density but differes for each clay. The ZP is directly related to the density of the slip. The higher the ZP the more stable a slip is; the value of the ZP of a mixture does not follow a simple law but the electrical resistance of a mixture does follow a simple additive law. The ZP appears to have linear relation with the specific surface of the argillaceous material.

Lecuit, M.

Preparation and characterization of methacrylate hydrogels for zeta potential control

A technique based on the measurement of streaming potentials has been developed to evaluate the effects of hydrophilic coatings on electroosmotic flow. The apparatus and procedure are described as well as some results concerning the electrokinetic potential of glass capillaries as a function of ionic strength, pH, and temperature. The effect that turbulence and entrance flow conditions have on accurate streaming potential measurements is discussed. Various silane adhesion promoters exhibited only a slight decrease in streaming potential. A coating utilizing a glycidoxy silane base upon which methylcellulose is applied affords a six-fold decrease over uncoated tubes. Hydrophilic methacrylate gels show similar streaming potential behavior, independent of the water content of the gel. By introduction of positive or negative groups into the hydrophilic methacrylate gels, a range of streaming potential values are obtained having absolute positive or negative signs.

Gregonis, D. E.

Determining the Point of Zero Zeta Potential in Solid Samples

Technique for measuring pzzp in solid samples incorporates sample in photochemical cell and measures temperature dependence of flatband potential. Pzzp is obtained from slope of best straight line through measured points. Tests agree well with expected values. In technique sample does not have to be in powder form.

Byvik, C. E.

Method for determining the point of zero zeta potential of semiconductor

A method to determine the potential of zero charge of an unpowdered semiconductor material is presented. The semiconductor material is used as the working electrode of a standard three electrode photoelectrochemical cell. The onset potential of the semiconductor material is measured at several different cell temperatures. The slope of the graph of onset potential versus temperature is used to compute the potential of zero charge.

Reichman, B.

Electrokinetic transport of heterogeneous particles in suspension

The Smoluchowski equation for electrophoresis predicts that the electrophoretic velocity of a particle is proportional to its zeta potential but not its size, shape, or orientation. Furthermore, the equation predicts that the rotation rate is identically zero. The Smoluchowski equation fails for heterogeneous particles (i.e., those with nonuniform zeta potentials). Recent theories and experiments show that particles with a dipole moment of zeta potential rotate into alignment with an externally applied electric field. For doublets (particles composed of two spheres) the rotation rate depends on (1) whether the spheres are rigidly rocked or freely rotating, and (2) the gap distance between the spheres. The relative configuration of two coagulated spheres is determined by the colloidal forces of the system. The goal of our research is to use measurements of electrophoretic rotation to determine the gap between two spheres of a colloidal doublet and also to determine whether or not the doublet is rigid.

Velegol, D.

Electrophoretic mobilities of erythrocytes in various buffers

The calibration of space flight equipment depends on a source of standard test particles, this test particle of choice is the fixed erythrocyte. Erythrocytes from different species have different electrophoretic mobilities. Electrophoretic mobility depends upon zeta potential, which, in turn depends upon ionic strength. Zeta potential decreases with increasing ionic strength, so cells have high electrophoretic mobility in space electrophoresis buffers than in typical physiological buffers. The electrophoretic mobilities of fixed human, rat, and rabbit erythrocytes in 0.145 M salt and buffers of varying ionic strength, temperature, and composition, to assess the effects of some of the unique combinations used in space buffers were characterized. Several effects were assessed: glycerol or DMSO (dimethylsulfoxide) were considered for use as cryoprotectants. The effect of these substances on erythrocyte electrophoretic mobility was examined. The choice of buffer depended upon cell mobility. Primary experiments with kidney cells established the choice of buffer and cryoprotectant. A nonstandard temperature of EPM in the suitable buffer was determined. A loss of ionic strength control occurs in the course of preparing columns for flight, the effects of small increases in ionic strength over the expected low values need to be evaluated.

Plank, L. D.

Electrokinetic potential and stability of SiC suspensions in electrolyte solutions

The dependence of zeta potential on pH of an aqueous Si carbide suspension was studied by an electroosmosis method. The effect of pH on the Si carbide electrical double layer is attributed to the participation of H and OH ions in the surface dissociation reactions of weak acid OH groups on an oxidized carbide surface. Maximum stability of the suspensions was observed at maximum negative zeta potentials.

Eremenko, B. V.

Electrophoretic mobility of cells in a vertical Ficoll gradiant

The upward migration of living cells and test particles under the influence of a constant electric field in a low conductivity Ficoll gradient occurs at nearly constant velocity. Viscosity and neutral polymer concentration affect migration rate. Decreasing viscosity speeds up the particle migration, decreasing neutral polymer (Ficoll) concentration, slows particle migration, since electrophoretic mobility increases approximately linearly with neutral polymer concentration. Neutral polymers interact with the cell surface to effectively raise its zeta potential. An analytic function was developed from the known dependence of these physical variables on migration distance; the analysis expresses migration velocity as an explicit function of position in the density gradient. It predicts an almost linear increase in velocity of about 12 to 16% over the working region of the gradient. It was numerically integrated and correctly predicts cell migration distance vs time curves without the use of any fitted parameters. The resulting migration curves follow the expected slowly varying exponential form that closely resembles a straight line. The ability to determine standard electrophoretic mobilities from such curves depends on knowledge of the effect of Ficoll on the zeta potential of the cell type that is separated.

Plank, L. D.

Photovoltage response to temperature change at oxide semiconductor electrodes

A study has been carried out on single crystal electrodes of TiO2, SrTiO3, and alpha-Fe2O3 and polycrystalline WO3 to investigate the effect of cell temperature on the onset potential of n-type oxide semiconductor electrodes. It is found that the change of the onset potential with temperature is due to the potential change across the Helmholtz layer. The amount of this change depends on the point of zero zeta potential (pzzp) of the semiconductor electrode. The possibility of increasing the solar-to-chemical energy conversion efficiency of a photochemical cell by increasing the cell temperature is discussed.

Reichman, B.

Methods for improved resolution of flow electrophoresis cells

First method involves remote adjusting of zeta potential. Second approach sandwiches two conducting metal plates between opposite cell walls and thin insulating layer. Third method forces buffer to flow in direction opposite particle streams.

Mccreight, L. R.

Detailed results of ASTP experiment MA-011

This experiment was developed in order to conduct engineering and operational tests of electrokinetic equipment in a micro-gravity environment. The experimental hardware in general functioned as planned and electrophoretic separations were obtained in space. The results indicated the development of satisfactory sample collection, return, and preservation techniques. The application of a near-zero zeta potential interior wall coating to the experimental columns, confirmation of biocompatibility of all appropriate hardware components, and use of a sterile operating environment provided a significant step forward in the development of a biological processing facility in space. A separation of a test of aldehyde-fixed rabbit, human, and horse red blood cells was obtained. Human kidney cells were separated into several components and viable cells returned to earth. The isotachophoretic separation of red cells was also demonstrated. Problems associated with the hardware led to a lack of success in the attempt to separate subpopulations of human lymphocytes.

Seaman, G. V. F.

Semiconductor photoelectrochemistry

Semiconductor photoelectrochemical reactions are investigated. A model of the charge transport processes in the semiconductor, based on semiconductor device theory, is presented. It incorporates the nonlinear processes characterizing the diffusion and reaction of charge carriers in the semiconductor. The model is used to study conditions limiting useful energy conversion, specifically the saturation of current flow due to high light intensity. Numerical results describing charge distributions in the semiconductor and its effects on the electrolyte are obtained. Experimental results include: an estimate rate at which a semiconductor photoelectrode is capable of converting electromagnetic energy into chemical energy; the effect of cell temperature on the efficiency; a method for determining the point of zero zeta potential for macroscopic semiconductor samples; a technique using platinized titanium dioxide powders and ultraviolet radiation to produce chlorine, bromine, and iodine from solutions containing their respective ions; the photoelectrochemical properties of a class of layered compounds called transition metal thiophosphates; and a technique used to produce high conversion efficiency from laser radiation to chemical energy.

Buoncristiani, A. M.

Characteristics of statoliths from rootcaps and coleoptiles

Amyloplasts with intact envelopes were isolated from corn coleoptiles, incubated with either cationized ferritin (CF) or fluorescein isothiocyanate (FITC)-CF, and examined with epifluorescence optics. Before incubation, the mean zeta potential was found to be -19.4 mv. The net negative surface charge was confirmed ultrastructurally by the binding of CF to both amyloplasts and starch grains. Binding to the latter was reduced compared to the former. FITC-CF showed binding to some but not all amyloplasts, and was absent from individual starch granules. Membrane-bound calcium, indicated by chlorotetracycline, fluorescence, was detected throughout the cytoplasm of root cap cells. These results may reflect an affinity of CF for membrane-based charge, and suggest that a calcium shell exists on the amyloplast envelope.

Sack, F. D.

A computer program for determining the electrophoretic mobility of cells in a rectangular chamber during asymmetric electroosmotic flow

In the field of cell electrophoresis, computer programs have been used for the estimation of zeta potential and surface charge density of specific charged chemical species from electrophoretic mobility data. The union of computer and microscope cell electrophoresis in the laboratory has yielded several satisfying results. The method organizes and error checks these data and stores them on permanent file for future reference or reanalysis. This computer analysis, accomplished in two steps by two main programs and a major subroutine, provides a quick, useful and realistic presentation of mobility data in histogram form, and is appropriate for any microelectrophoretic work using rectangular chambers. Computer program 1 is the first step of two in the analysis of mobility data. Program 2 consists of the main program, POLY2, which fits a least squares parabola to the apparent mobility data generated by Program 1, and the subroutine EXTRA which determines actual cell mobilities using the regression curve equation.

Source record