Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave generator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

High-Fidelity Numerical Wave Tank Verification & Validation Study: Wave Generation Through Paddle Motion: Preprint

This paper presents a numerical benchmark study of wave propagation due to a paddle motion using different high-fidelity numerical models, which are capable of replicating the nearly actual physical wave tank testing. A full time series of the measured wave generation paddle motion which was used to generate wave propagation in the physical wave tank will be utilized in each of the models contributed by IEA OES Task 10's participants, which includes both computational fluid dynamics (CFD) and smooth hydrodynamic particle (SPH). The high-fidelity simulations of the physical wave testcase will allow for the evaluation of the initial transient effects from wave ramp-up and its evolution in the wave tank over time for two representative regular waves with varying levels of nonlinearity. A couple of interesting metrics like the predicted wave surface elevation at select wave probes, wave period, and phase-shift in time will be assessed to evaluate the relative accuracy of numerical models versus experimental data within specified time intervals. These models will serve as a guide for modelers in the wave energy community and provide a base case to allow further and more detailed numerical modeling of the fixed Kramer Sphere Cases under wave excitation force wave tank testing.

HYDRO ENERGY,TIDAL AND WAVE POWER↗
DOE OSTI2025

A theoretical study of the upper bound of surface elevation variance in the Phillips initial stage during wind-wave generation

The resonance mechanism in the initial of wind-wave generation proposed by Phillips is a foundation of wind-wave generation theory, but a precise theoretical quantification of wave energy growth in this initial stage has not been obtained yet after more than six decades of research. In this study, we aim to address this knowledge gap by developing an analytical approach based on a novel complex analysis method to theoretically investigate the temporal evolution of the wave energy in the Phillips initial stage. We quantitatively derive and analyse the growth behaviour of the surface wave energy and obtain an analytical solution for its upper bound. Our result highlights the crucial effects of surface tension. Because the phase velocity of gravity–capillary waves has a minimal value at a critical wavenumber, gravity–capillary waves and gravity waves (which neglect surface tension) exhibit distinct resonance curve properties and wave energy growth behaviours. For gravity waves, the resonance curve extends indefinitely; for gravity–capillary waves, it either forms a finite-length curve or does not exist, depending on the wind speed. The leading-order term of the upper-bound solution of the energy of gravity waves increases linearly over time, while for gravity–capillary waves, the term increases linearly over time under strong wind conditions but remains finite under weak wind conditions. This theoretical study provides an analytical framework for the generation of wind-waves in the Phillips initial stage, which may inspire further theoretical, numerical and experimental research.

58 GEOSCIENCES↗
DOE OSTI2025

Theoretical investigation of plasma wave generation by pulsed electron beams in space

Here, we report theoretical calculations of plasma wave generation in the whistler modes and in the extraordinary modes, by pulsed electron beams in a magnetized plasma. The numerical simulations of the wave generation take into account the longitudinal expansion of the electron beam due to the space charge force and the energy spread. The work presented in this article provides predictions for the wave generation performance of the beam plasma interactions experiment (Beam PIE), where pulsed electron beams were produced by a spaceborne radio frequency (RF) linear accelerator. We also theoretically explore the desirable properties of the pulsed electron beam for future space experiments, which will be the next step toward eventually demonstrating the radiation-belt remediation (RBR).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Propagation of Chorus Waves Generated in Minimum‐B Pockets

Abstract We present the first ray tracing results of chorus waves generated in minimum‐B pockets. A new ray tracer is developed to accommodate an arbitrary magnetic field model, which enables us to construct minimum‐B pocket geometries using the Tsyganenko (1989) model. Rays with different frequencies and initial wave normal angles are launched from minimum‐B pockets and traced under different geomagnetic activity and hot electron density conditions. Our results indicate that chorus waves generated from minimum‐B pockets are usually highly localized and thus are unlikely to be detected unless the spacecraft is very close to the source region. These waves are also very unlikely to propagate into the plasmasphere. The propagation distances generally decrease with increasing geomagnetic activity.

Kang, Ning↗
DOE OSTI2020

Analysis of Electric and Magnetic Lightning-Generated Wave Amplitudes Measured by the Van Allen Probes

Herein we provide a statistical analysis of both electric and magnetic field wave amplitudes of very low frequency lightning-generated waves (LGWs) based on the equivalent of 11.5 years of observations made by the Van Allen Probes encompassing ~24.6 × 10 6 survey mode measurements. We complement this analysis with data from the ground-based World Wide Lightning Location Network to explore differences between satellite and ground-based measurements. LGW mean amplitudes are found to be low compared with other whistler mode waves (1 ± 1.6 pT and 19 ± 59 μV/m). Extreme events (1/5,000) can reach 100 pT and contributes strongly to the mean power below $L$ = 2. We find excellent correlations between World Wide Lightning Location Network-based power and wave amplitudes in space at various longitudes. We reveal strong dayside ionospheric damping of the LGW electric field. LGW amplitudes drop for $L$ < 2, contrary to the Earth's intense equatorial lightning activity. We conclude that it is difficult for equatorial LGW to propagate and remain at $L$ < 2.

Electric wave power↗
DOE OSTI2026

Modulating surface acoustic wave generation through superconductivity

Surface acoustic waves (SAWs), with their five orders-of-magnitude slower propagation velocity, allow for considerably shorter wavelengths at the same frequency compared to electromagnetic waves. The short wavelengths allow for device miniaturization and on-chip integration. The generic design of these devices involves piezoelectric substrates with comb-like arrays of Al or Au electrodes known as interdigitated transducers (IDTs) deposited on the surface. However, Al and Au both have shortcomings at the cryogenic temperatures required for quantum applications, namely, the formation of two-level systems and the lack of superconductivity perpetuating Ohmic losses, respectively. In this work, SAWs are generated in the high-MHz to low-GHz range using niobium nitride (NbN) interdigitated transducers and Bragg reflectors. We demonstrate the fabrication of acoustic devices through photolithography and reactive ion etching. The sharp transition between superconducting and normal states and the corresponding change in SAW transmission allows for fine control of the “on” (superconducting) and “off” (normal) states of NbN, with a ΔT = 1 K separating the transmission minimum and maximum. We demonstrate a 16× difference in transmission between the “on” and “off” states of the device. The SAW transmission behavior mirrors the change in resistance of NbN at its T c . These findings open up new possibilities for the integration of NbN SAW resonators into existing quantum architectures based on NbN and a method for adjusting transmission properties independent of applied voltage.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Correlated spin-wave generation and domain-wall oscillation in a topologically textured magnetic film

Spin waves, or magnons, are essential for next-generation energy-efficient spintronics and magnonics. Yet, visualizing spin-wave dynamics at nanoscale and microwave frequencies remains a formidable challenge due to the lack of spin-sensitive, time-resolved microscopy. Here, in this study, we report a breakthrough in imaging dipole-exchange spin waves in a ferromagnetic film owing to the development of laser-free ultrafast Lorentz electron microscopy, which is equipped with a microwave-mediated electron pulser for high spatiotemporal resolution. Using topological spin textures, we captured the emission, propagation, reflection and interference of spin waves from spin anti-vortices under radio-frequency excitations. Remarkably, we show that spin-wave generation is closely tied to the oscillatory motion of specific magnetic domain walls, providing the missing link between wave emission and wall dynamics near magnetic singularities. This work opens new possibilities in magnonics, offering a nanoscopic view of spin dynamics via transmission electron microscopy and enabling controlled excitation via radio-frequency fields for exploring non-equilibrium states in magnetic and multiferroic systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

On various mechanisms of shear wave generation from underground chemical explosions in hard rocks

Significant shear waves observed during underground explosions can make them look similar to natural earthquakes. In the near field, they can be caused by the source geometry and emplacement conditions, heterogeneous and anisotropic properties of the rock mass, relaxation of a non-uniform in situ stress around the source after the departure of the shock wave as well as by activation of nearby faults. Here, the stress relaxation mechanism is important at depth when the difference in main principal stresses becomes significant. Another mechanism of shear motion generation is due to explosive gas flow from the source cavity into the cracks initiated by the shock wave and joints connected to the cavity. Also, the shock wave from the explosion can cause weakening of the rock either due to permanent damage or shock-induced liquefaction at saturated joints. Numerical modelling of underground chemical explosions in hard rock at various confinement stresses has been conducted to compare various mechanisms of shear wave generation and their seismic characteristics with that of a simple fault rupture process observed during an earthquake.

58 GEOSCIENCES↗
DOE OSTI2021

Shear wave generation by mode conversion in picosecond ultrasonics: Impact of grain orientation and material properties

Abstract Picosecond ultrasonics has seen wide application in the investigation of interfaces in semiconductors and 3D imaging in biological systems. Shear ultrasonic waves are important for elastic constant and grain orientation measurement in ceramic materials. In this study, we investigate the impact of grain orientation and material's elastic properties on the generation efficiency of shear waves by mode conversion at a transducer thin film/substrate interface. The solution of acoustic wave equations suggests that crystal grain orientation has a strong impact on the generated shear wave amplitude. This dependence is found to be closely related to the magnitude of longitudinal component of wave displacements. The applicability of analytical model is validated by the experimental results from time‐domain Brillouin scattering. Moreover, material properties determine acoustic wave amplitudes based on the acoustic mismatch model and, particularly, large elastic anisotropy defined by Zener ratio favors strong shear waves. In the light of this analysis, several recommendations on suitable grain orientations and film materials are made to facilitate shear wave detection.

Wang, Yuzhou↗
DOE OSTI2023

Surface acoustic wave generation and detection in the quantum paraelectric regime of SrTiO 3 -based heterostructures

Strontium titanate (STO), apart from being a ubiquitous substrate for complex-oxide heterostructures, possesses a multitude of strongly coupled electronic and mechanical properties. Surface acoustic wave (SAW) generation and detection offers insight into electromechanical couplings that are sensitive to quantum paraelectricity and other structural phase transitions. Propagating SAWs can interact with STO-based electronic nanostructures, in particular LaAlO 3 /SrTiO 3 (LAO/STO). Here, we report the generation and detection of SAW within LAO/STO heterointerfaces at cryogenic temperatures ( T ≥ 2 K) using superconducting interdigitated transducers. Further, the temperature dependence shows an increase in the SAW quality factor that saturates at T ≈ 8 K. The effect of backgate tuning on the SAW resonance frequency shows the possible acoustic coupling with the ferroelastic domain wall evolution. This method of generating SAWs provides a pathway towards the dynamic tuning of ferroelastic domain structures, which are expected to influence the electronic properties of complex-oxide nanostructures. Devices that incorporate SAWs may in turn help to elucidate the role of ferroelastic domain structures in mediating electronic behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Nanoscale strain wave generation by a piezoelectric grating from polar vortices

Nanostructures formed by spontaneously broken symmetry have provided new ways to manipulate quantum states. Specifically, topological structures with periodic spatial ordering, such as polar vortices and skyrmions, can be ideal hosts for creating engineered responses in both spatial and frequency domains. So far, however, only a few examples of such hierarchical engineering have been reported in the literature. Here we demonstrate that the spatially modulated piezoelectric response of a polar vortex structure can create strain waves with a characteristic nanoscale wavefront. Using time-resolved pump–probe resonant X-ray scattering and diffraction measurements, coupled with dynamical phase-field simulations, we show that the piezoelectric modulation of the spontaneously formed polar vortex crystal functions as an acoustic diffraction grating. This system converts incoming laterally uniform strain waves into outgoing waves with a characteristic sub-terahertz frequency, driven by an intrinsic excitation of the polar vortex crystal. Moreover, our phase-field simulations suggest that the dynamic mechanical displacements exhibiting vortex textures are generated from both space- and time-varying piezoelectric responses. Our findings illustrate a new method for generating nanoscale strain waves with unique spatial textures by tuning the hierarchical order of polar topologies to engineer new collective modes, allowing for a wide range of control through the topological lattice.

ferroelectrics↗
DOE OSTI2020

Magnetic reconnection and kinetic waves generated in the Earth's quasi-parallel bow shock

Magnetic reconnection in quasi-parallel shocks, relevant to the Earth’s bow shock, is studied by means of two-dimensional full particle-in-cell simulations. As the Alfvénic Mach number increases, the propagation direction of the waves excited in the transition region changes, and the shock becomes more turbulent with more reconnection sites. In the higher Mach number shock, abundant electron-only reconnection sites are generated with scales on the order of the ion skin depth or less. Non-reconnecting current sheets can also generate electron jets and energy dissipation can occur there as well. However, non-reconnecting current sheets with the magnetic field reversal typically show a smaller energy dissipation rate than reconnecting current sheets. In the shock transition region, two types of waves are responsible for driving reconnection: one has a wavelength around three ion skin depths (d i ), and the other has a wavelength less than 1 d i . Here, electron and ion distribution functions show that in regions where the former type of waves is excited, there are two ion beams and a single-peaked electron distribution. In contrast, in regions where the latter type of waves is excited, there are multiple electron and ion beams. The waves propagating obliquely to the magnetic field bend the magnetic field lines, and magnetic reconnection occurs where oppositely directed field lines come into contact.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Whistler waves generated by nongyrotropic and gyrotropic electron beams during asymmetric guide field reconnection

Using a two-dimensional particle-in-cell simulation of asymmetric reconnection with a guide field whose strength is 0.3 times the reconnecting magnetic field, we study electron distribution functions and wave intensities in the diffusion region, focusing on the electron diffusion region (EDR). Wave activities with frequencies below the electron cyclotron frequency are observed, and these are whistler waves propagating almost anti-parallel to the magnetic field. The waves are concentrated near the magnetospheric separatrix away from the X line, but the wave activity also spreads through the EDR near the X line. The reconnection outflows are asymmetric in the outflow direction in the magnetospheric side, and the wave intensity is stronger in the side of the faster electron outflow. We study the whistler waves using the fast Fourier transform, analyses of electron velocity distribution functions, and the dispersion solver calculation. Along the magnetospheric separatrix in the stronger outflow side, highly anisotropic electron beams exist with super-Alfvénic drift speeds. The dispersion analysis shows that there are two modes: a temperature anisotropy mode and a beam mode. Outside the EDR, the whistler wave intensity is highest near the separatrix, but the wave intensity decreases if we move away from the separatrix toward the magnetic neutral line because of the increase in the electron population near zero parallel velocity. In the EDR, in the velocity plane perpendicular to the magnetic field, ring/crescent electron distribution functions are observed. Near the X-line, the wave power is enhanced where nongyrotropic electrons contribute to increase the perpendicular temperature anisotropy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Removal of Non-Specifically Bound Proteins Using Rayleigh Waves Generated on ST-Quartz Substrates

Label-free biosensors are plagued by the issue of non-specific protein binding which negatively affects sensing parameters such as sensitivity, selectivity, and limit-of-detection. In the current work, we explore the possibility of using the Rayleigh waves in ST-Quartz devices to efficiently remove non-specifically bound proteins via acoustic streaming. A coupled-field finite element (FE) fluid structure interaction (FSI) model of a surface acoustic wave (SAW) device based on ST-Quartz substrate in contact with a liquid loading was first used to predict trends in forces related to SAW-induced acoustic streaming. Based on model predictions, it is found that the computed SAW body force is sufficient to overcome adhesive forces between particles and a surface while lift and drag forces prevent reattachment for a range of SAW frequencies. We further performed experiments to validate the model predictions and observe that the excitation of Rayleigh SAWs removed non-specifically bound (NSB) antigens and antibodies from sensing and non-sensing regions, while rinsing and blocking agents were ineffective. An amplified RF signal applied to the device input disrupted the specific interactions between antigens and their capture antibody as well. ST-quartz allows propagation of Rayleigh and leaky SH-SAW waves in orthogonal directions. Thus, the results reported here could allow integration of three important biosensor functions on a single chip, i.e., removal of non-specific binding, mixing, and sensing in the liquid phase.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Patterned crystal growth and heat wave generation in hydrogels

Abstract The crystallization of metastable liquid phase change materials releases stored energy as latent heat upon nucleation and may therefore provide a triggerable means of activating downstream processes that respond to changes in temperature. In this work, we describe a strategy for controlling the fast, exothermic crystallization of sodium acetate from a metastable aqueous solution into trihydrate crystals within a polyacrylamide hydrogel whose polymerization state has been patterned using photomasks. A comprehensive experimental study of crystal shapes, crystal growth front velocities and evolving thermal profiles showed that rapid growth of long needle-like crystals through unpolymerized solutions produced peak temperatures of up to 45˚C, while slower-crystallizing polymerized solutions produced polycrystalline composites and peaked at 30˚C due to lower rates of heat release relative to dissipation in these regions. This temperature difference in the propagating heat waves, which we describe using a proposed analytical model, enables the use of this strategy to selectively activate thermoresponsive processes in predefined areas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗