Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave arrival time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Seismic structure of the lunar mantle - An overview

The direct P and S wave arrival times from natural lunar seismic events are the most complete and reliable data set for determining the structure of the lunar mantle. A total of 40 events provide sufficiently well-observed arrivals to permit the extraction of structural information. Using this arrival time data set, the average velocities in a two-layered mantle with an assumed crustal structure (from Toksoz et al., 1974) have been obtained. Reflected phases arriving after direct S are then used to calculate the depth of the boundary between the two mantle layers, and to demonstrate that it is probably a complex transition zone approximately 80 km thick between 400 and 480 km depth. To determine velocity gradients in the upper mantle it is required that the model explain the pronounced decrease in shear wave amplitudes and accompanying delay in shear wave arrival times beyond a distance of about 90 deg. The final model is well-constrained.

Goins, N. R.↗

Lunar Seismology: the Internal Structure of the Moon

The direct P and S wave arrival times are the primary data set that can be measured on the seismograms of natural lunar seismic events. Polarization filtering techniques allow the enhancement of secondary body wave arrivals and record curves to identify the secondary phases and deduce structural information. Finally, shear wave amplitude vs. distance curves yield information on the location and magnitude of seismic velocity gradients in the interior. The results of these analyses show that the moon appears to have a two-layer crust at all four seismic stations: a 20 km upper crust that seems to be constant at all sites and a lower crust that is 40 km thick at stations 12 and 14 (mare), 55 + or - 10 km at station 16 (highland), and tentatively either 40 km or 70 km at station 15. The lower mantle extends from 480 km to at least 1100 km depth which is the maximum depth of penetration of all but a few seismic waves used as data. No definitive evidence for or against a lunar core exists.

Goins, N. R.↗

The lunar interior - A summary report

The complete seismic data set collected by the Apollo network contains about 40 events which provide significant structural information on the lunar interior. The seismograms from these events yield a set of direct wave arrival times that constitutes the most reliable information on the seismic structure of the moon. Secondary data include possible reflected arrivals from crustal and mantle interfaces, an apparent shear wave shadow zone for surface events beginning at about 90 deg distance, and the shear wave amplitude decay with distance. Analysis of these data give well-constrained and stable average velocity values for the upper and lower mantle regions independent of most assumptions. The upper-lower mantle transition can begin no shallower than 400 km depth and may represent a compositional change although the effects of increased temperature cannot be ruled out.

Goins, N. R.↗

Initial Results from the Variable Intensity Sonic Boom Propagation Database

An extensive sonic boom propagation database with low- to normal-intensity booms (overpressures of 0.08 lbf/sq ft to 2.20 lbf/sq ft) was collected for propagation code validation, and initial results and flight research techniques are presented. Several arrays of microphones were used, including a 10 m tall tower to measure shock wave directionality and the effect of height above ground on acoustic level. A sailplane was employed to measure sonic booms above and within the atmospheric turbulent boundary layer, and the sailplane was positioned to intercept the shock waves between the supersonic airplane and the ground sensors. Sailplane and ground-level sonic boom recordings were used to generate atmospheric turbulence filter functions showing excellent agreement with ground measurements. The sonic boom prediction software PCBoom4 was employed as a preflight planning tool using preflight weather data. The measured data of shock wave directionality, arrival time, and overpressure gave excellent agreement with the PCBoom4-calculated results using the measured aircraft and atmospheric data as inputs. C-weighted acoustic levels generally decreased with increasing height above the ground. A-weighted and perceived levels usually were at a minimum for a height where the elevated microphone pressure rise time history was the straightest, which is a result of incident and ground-reflected shock waves interacting.

Haering, Edward A., Jr.↗

Delivery and application of precise timing for a traveling wave powerline fault locator system

The Bonneville Power Administration (BPA) has successfully operated an in-house developed powerline fault locator system since 1986. The BPA fault locator system consists of remotes installed at cardinal power transmission line system nodes and a central master which polls the remotes for traveling wave time-of-arrival data. A power line fault produces a fast rise-time traveling wave which emanates from the fault point and propagates throughout the power grid. The remotes time-tag the traveling wave leading edge as it passes through the power system cardinal substation nodes. A synchronizing pulse transmitted via the BPA analog microwave system on a wideband channel sychronizes the time-tagging counters in the remote units to a different accuracy of better than one microsecond. The remote units correct the raw time tags for synchronizing pulse propagation delay and return these corrected values to the fault locator master. The master then calculates the power system disturbance source using the collected time tags. The system design objective is a fault location accuracy of 300 meters. BPA's fault locator system operation, error producing phenomena, and method of distributing precise timing are described.

Street, Michael A.↗

Field Evaluations of Sampling, Interviewing, and Flight Tracking of NASA's Low Boom Flight Demonstrator Aircraft

The first year’s effort identified sampling and interviewing as the principal risks to assessment of prompt reactions to overflights producing low-amplitude sonic booms. It also 1) established the utility of geo-information system-based route planning for LBFD flight missions, 2) developed and demonstrated a prototype of a geographically-distributed, Internet-enabled instrumentation system capable of wide-area tracking of LBFD aircraft in near-real time. The latter system permits synchronizing the conduct of interviews in multiple overflown communities with arrival times of shock waves at interviewing sites; and of measuring, archiving, and processing their acoustic signatures. Means were also recommended for constructing representative, telephone-based samples of eligible respondents living in households within carpet boom corridors adjacent to LBFD flight tracks, and for conducting interviews with cross-sectional (independent) samples of such respondents about their prompt reactions to exposure to low-amplitude sonic booms. A detailed study design was prepared and accepted by NASA for a set of single-contact attempt telephone interviews with a nationally representative sample of households. The study design focused on testing automated and live agent interview completion rates obtainable without callbacks. A minimal (two monitoring station) version of the aircraft tracking system was built and installed near a civil airport in a successful demonstration of the system’s ability to detect and track aircraft movements. The field exercise also demonstrated the ability of the system to capture the acoustic emissions of departing aircraft, and to serve aircraft position and sound level information to remote, geographically-distributed analysts in near-real time. Upon approval of OMB and IRB of the detailed study plan, a stratified, nationally representative sample of landline and wireless telephone-subscribing households was constructed. A total of 12,734 telephone interview contact attempts of the sort required by a straightforward cross-sectional study design were then made. These contact attempts demonstrated the impracticality of conducting a time-critical, cross-sectional study of prompt community response to low-amplitude sonic booms by means of “independent” (single contact attempt per respondent for each LBFD flight mission) telephone samples of respondents. The observed interview completion rates for these single telephone contact attempts were so low (~ 1% to 3% for automated and live agent interviews, respectively) that: 1) the representativeness of collected opinions would be susceptible to intuitive challenge as inadequate, even absent conclusive evidence of non-representativeness. Refuting challenges to representativeness would have to demonstrate that the composition of the actual sample did not differ from that of the target population, a task that is tantamount to proving a negative; 2) the information required to refute allegations of non-representativeness would require a questionnaire considerably lengthier than that required simply to determine the prevalence of boom-induced startle and annoyance. Such a questionnaire would have to inquire about potentially sensitive and intrusive matters, including respondents’ age, gender, education, employment, home ownership, income, ethnicity, family size, and other demographic factors; and 3) unreasonable numbers of attempts would be required to re-contact households with unsuccessful initial contact attempts, given the limited time available for doing so. For example, if about 500 completed interviews were desired in a supersonically overflown community, approximately 50,000 automated interview attempts would have to be made within ten to fifteen minutes of each LBFD overflight. Such large numbers of contact attempts could well exceed the numbers of households available for interview in areas of similar boom exposure levels in some communities near LBFD flight tracks. Such large numbers of interviews could be cost-effectively undertaken only by means of automated (i.e., outgoing interactive voice response) interviewing, a data collection method ill-suited for complex and sensitive questionnaire items. The infeasibility of independent sampling for evaluating prompt responses to LBFD overflights in a cross-sectional study is due in large part to simple non-response: that is, potential respondents – particularly those contacted on wireless telephones – refusing to answer calls with unfamiliar caller IDs. It is also due in part, however, to 1) the lack of time to attempt to contact the same respondent more than once within a few minutes after the arrival of a shock wave at the respondent’s location; and 2) the need to place calls during weekday/daytime hours, when response rates are notably lower than during evenings and weekends. Despite the poor interview completion rates achieved under the above constraints, cross sectional assessments of delayed reactions to LBFD overflights could still be feasible, if multiple attempts could be made to contact respondents during evening and weekend time periods, over extended time periods. Detailed plans for a longitudinal (panel) sample were developed as an alternative to a cross sectional sample design.

Fidell, Sanford↗

Core Angular Momentum and the IERS Sub-Centers Activity for Monitoring Global Geophysical Fluids: Core Angular Momentum and Earth Rotation - Part 1

The part of the grant was to use recordings of seismic waves travelling through the earth's core (PKP waves) to study the inner core rotation and constraints on possible density anomalies in the fluid core. The shapes and relative arrival times of such waves associated with a common source were used to reduce the uncertainties in source location and excitation and the effect of unknown mantle structure. The major effort of the project is to assemble historical seismograms with long observing base lines. We have found original paper records of SSI earthquakes at COL between 1951 and 1966 in a warehouse of the U.S. Geological Survey office in Golden, Colorado, extending the previous measurements at COL by Song and Richards [1996] further back 15 years. Also in Alaska, the University of Alaska, Fairbanks Geophysical Institute (UAFGI) has been operating the Alaskan Seismic Network with over 100 stations since the late 1960s. Virtually complete archives of seismograms are still available at UAFGI. Unfortunately, most of the archives are in microchip form (develocorders), for which the use of waveforms is impossible. Paper seismograms (helicorders) are available for a limited number of stations, and digital recordings of analog signals started around 1989. Of the paper records obtained, stations at Gilmore Dome (GLM, very close to COL), Yukon (FYU), McKinley (MCK), and Sheep Creek Mountain (SCM) have the most complete continuous recordings.

Song, Xia-Dong↗

X ray microbursts and VLF chorus

On January 4, 1978, at 1140 UT, a SuperArcas sounding rocket was launched from Siple Station, Antarctica (L = 4.2, 76 deg S, 84 deg W), during a geomagnetically disturbed period (Kp = 6-) with intense X-ray and VLF chorus activity. The parachuted payload observed an intense microburst precipitation event of 10-minute duration. These data have been correlated with measurements of FLF chorus by receivers on the ground at both Siple and its magnetic conjugate point, Roberval, Quebec. Detailed one-to-one correspondence between the microbursts and the chorus was not a consistent feature of the data. Time series analysis fo the data did indicate a significant correlation between the Siple X-ray precipitation and the Roberval VLF waves with an arrival time delay of 0.1 + or 0.3.

Roeder, J. L.↗

Structural Health Monitoring and Impact Detection Using Neural Networks for Damage Characterization

Detection of damage due to foreign object impact is an important factor in the development of new aerospace vehicles. Acoustic waves generated on impact can be detected using a set of piezoelectric transducers, and the location of impact can be determined by triangulation based on the differences in the arrival time of the waves at each of the sensors. These sensors generate electrical signals in response to mechanical motion resulting from the impact as well as from natural vibrations. Due to electrical noise and mechanical vibration, accurately determining these time differentials can be challenging, and even small measurement inaccuracies can lead to significant errors in the computed damage location. Wavelet transforms are used to analyze the signals at multiple levels of detail, allowing the signals resulting from the impact to be isolated from ambient electromechanical noise. Data extracted from these transformed signals are input to an artificial neural network to aid in identifying the moment of impact from the transformed signals. By distinguishing which of the signal components are resultant from the impact and which are characteristic of noise and normal aerodynamic loads, the time differentials as well as the location of damage can be accurately assessed. The combination of wavelet transformations and neural network processing results in an efficient and accurate approach for passive in-flight detection of foreign object damage.

Ross, Richard W.↗

Structure of the lunar mantle

The structure of the lunar mantle is examined by using data on the decay of shear wave amplitude with distance and the relative arrival times of P and S waves. The new analysis confirms a previous lunar model based primarily upon travel times and more closely defines certain properties of the lunar mantle. A negative shear wave velocity gradient of 0.0013 (km/s)/km, shear wave Q of 4000, and Poisson's ratio of 0.250 plus or minus 0.025 are found for the upper mantle, which lies between the depths of 60 and 300 km. A rapid decrease of shear wave velocity with increasing depth is observed starting at around a 300-km depth, associated with a lower Q for shear waves. Poisson's ratio in the lower part of the middle mantle, which extends to a depth of about 1000 km, is estimated to be 0.36 plus or minus 0.02.

Nakamura, Y.↗

The influence of the energy emitted by solar flare soft X-ray bursts on the propagation of their associated interplanetary shock waves

The relationship between the thermal energy released from 29 solar flares and the propagation features of their associated interplanetary shock waves that were detected at 1 AU is investigated. The 29 interplanetary shock waves were identified unambiguously and their tracking from each solar flare was deduced by tracking their associated interplanetary type-II radio emission. The thermal energy released in the solar flares was estimated from the time-intensity profiles of 1-8 A soft X-ray bursts from each flare. A good relationship is found between the flares' thermal energy with the IP shock-waves' transient velocity and arrival time at the earth - that is, the largest flare energy released is associated with the faster shock waves. Finally, a possible scenario of formation of a shock wave during the early phase of the flare and its propagation features is discussed.

Pinter, S.↗

Ultrasonic input-output for transmitting and receiving longitudinal transducers coupled to same face of isotropic elastic plate

The quantitative understanding of ultrasonic nondestructive evaluation parameters such as the stress wave factor were studied. Ultrasonic input/output characteristics for an isotropic elastic plate with transmitting and receiving longitudinal transducers coupled to the same face were analyzed. The asymptotic normal stress is calculated for an isotropic elastic half space subjected to a uniform harmonic normal stress applied to a circular region at the surface. The radiated stress waves are traced within the plate by considering wave reflections at the top and bottom faces. The output voltage amplitude of the receiving transducer is estimated by considering only longitudinal waves. Agreement is found between the output voltage wave packet amplitudes and times of arrival due to multiple reflections of the longitudinal waves.

Williams, J. H., Jr.↗

Three-dimensional P and S wave velocity structures of southern Peru and their tectonic implications

Arrival times of compressional and shear (S) waves from microearthquakes recorded in 1981 by an 18-station regional array are used to study the three-dimensional velocity structure of the crust and upper mantle of the central Andes. The data suggest a crustal thickness of about 40 km beneath the coast, increasing to about 70 km beneath the Cordillera Occidental. The inverse correlation between the dip in the Moho and the dip of the slab may indicate a broad-scale causal relation between the two. S wave velocities in the mantle between 70 and 130 km depth above the 30-degree dipping slab are low, possibly indicating the presence of a partially melted asthenosphere that may be responsible for the magmatic activity recorded in southern Peru.

Cunningham, Paul S.↗

Case studies of gravity waves associated with isolated tornadic storms on January 13, 1976

Penetrative convection, thunderstorms, squall lines, etc., all generate atmospheric gravity waves which can be observed by a ground-based ionospheric Doppler sounder array. Sources of these waves can be determined from reverse ray tracing computations. Case studies of gravity waves associated with isolated tornadic storms on January 13, 1976 were summarized to establish the minimum data sampling time required for correct spectral analysis and ray tracing computations. It was concluded that the data sampling time can be reduced to two to three times the wave period while still obtaining a reasonably good power spectral density. It was also demonstrated that the data sampling time can be reduced to two to three times the time delay of the wave arrival between two station pairs while still obtaining a justifiably good cross-spectral analysis. Computed source locations of the observed gravity waves are compared with conventional and satellite meteorological data.

Hung, R. J.↗

Time-of-Arrival Lightning Location Retrieval Using an Oblate Spheroidal Earth Model

The problem of retrieving lightning ground strike location on an oblate spheroidal Earth using a network of 4 or more time-of-arrival sensors is considered. A recently developed analytic method for obtaining such retrievals on a spherical Earth surface is perturbed resulting in an iterative procedure to get correction terms. The perturbation procedure consists of applying a vector Newton's method to eqs. relating the distances from the lightning location to each sensor along a geodesic and the times of arrival of the wave produced by the lightning source at each sensor.

Solakiewicz, Richard↗

Air-coupled seismic waves at long range from Apollo launchings.

Microphones and seismographs were co-located in arrays on Skidaway Island, Georgia, for the launchings of Apollo 13 and 14, 374 km to the south. Simultaneous acoustic and seismic waves were recorded for both events at times appropriate to the arrival of the acoustic waves from the source. The acoustic signal is relatively broadband compared to the nearly monochromatic seismic signal; the seismic signal is much more continuous than the more pulse-like acoustic signal; ground loading from the pressure variations of the acoustic waves is shown to be too small to account for the seismic waves; and the measured phase velocities of both acoustic and seismic waves across the local instrument arrays differ by less than 6 per cent and possibly 3 per cent if experimental error is included. It is concluded that the seismic waves are generated by resonant coupling to the acoustic waves along some 10 km of path on Skidaway Island.

Donn, W. L.↗

Kilometer-wave type III burst - Harmonic emission revealed by direction and time of arrival

A type III solar burst was observed at seven frequencies between 3.5 MHz and 80 kHz by the Michigan experiment aboard the IMP-6 satellite. From the data burst direction of arrival as well as time of arrival can be determined. These quantities are predicted, using simple models whose parameters are varied to obtain a good fit to the observations. It is found that between 3.5 MHz and 230 kHz the observed radiation was emitted at the fundamental of the local plasma frequency, while below 230 kHz it was emitted at the second harmonic. The exciter particles that produced the burst onset and burst peak have velocities of 0.27 and 0.12, respectively, in units of the velocity of light.

Alvarez, H.↗

Development of a Fully Automated Guided Wave System for In-Process Cure Monitoring of CFRP Composite Laminates

A guided wave-based in-process cure monitoring technique for carbon fiber reinforced polymer (CFRP) composites was investigated at NASA Langley Research Center. A key cure transition point (vitrification) was identified and the degree of cure was monitored using metrics such as amplitude and time of arrival (TOA) of guided waves. Using an automated system preliminarily developed in this work, high-temperature piezoelectric transducers were utilized to interrogate a twenty-four ply unidirectional composite panel fabricated from Hexcel (Registered Trademark) IM7/8552 prepreg during cure. It was shown that the amplitude of the guided wave increased sharply around vitrification and the TOA curve possessed an inverse relationship with degree of cure. The work is a first step in demonstrating the feasibility of transitioning the technique to perform in-process cure monitoring in an autoclave, defect detection during cure, and ultimately a closed-loop process control to maximize composite part quality and consistency.

Hudson, Tyler B.↗