Virtual Power Plant utilization to Drive Energy Efficiency & Power Market Optimization for Multifamily Buildings
Explore the source record for details and available documents.
14 SOLAR ENERGY↗
SEARCH · Engineering Papers
Results for “virtual utility”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Utilizing a Virtual Sodium-Cooled Fast Reactor Digital Twin to Aid in Diversion Pathway Analysis for International Safeguards Applications
We report digital twin technology has the potential to improve the effectiveness of international safeguards inspectors by providing a tool which can: first, perform an accurate diversion path analysis, identify their indicators, and required sensors to detect them; and second, monitor facilities in real-time using critical data streams that benefit from this safeguards-by-design approach. Safeguards inspectors are required to visit facilities and verify the nuclear material to ensure no diversion has taken place and detect misuse of the facility; however, this analysis and verification effort is time consuming, and with limited funding it is imperative that time spent at a nuclear facility is focused on key areas. A virtual digital twin of three prototypic sodium fast reactors was developed, where diversion and misuse scenarios were explored to determine how a digital twin could provide inspectors with an understanding of how proliferation may occur and where the most likely areas for proliferation would be. For each of the three reactors, an optimization algorithm was able to find core designs which would be difficult to detect via sensors alone; however, the use of a machine learning adapter provided by the digital twin was able to show general trends in where proliferation as likely to take place.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Virtual Cable Impedance based Load Sharing in a Microgrid for Parallel Connected Grid Forming Converters
This paper presents a novel approach to power sharing between direct connected grid-forming converters, utilizing virtual cable impedance and droop-based outer loop control. To enhance stability, resistive droop is implemented, while virtual cable impedance with non-zero resistive and inductive components ensures improved power sharing. The inner loop controller employs a Lyapunov energy function to achieve superior dynamic performance. The proposed control architecture is validated through comprehensive modeling and real-time processor-in-the-loop simulations, demonstrating its robustness and efficiency under various operating conditions. The results highlight the potential of this control strategy to improve the reliability and efficiency of renewable energy systems. Additionally, a comparative analysis with traditional methods underscores the advantages of the proposed approach in terms of stability and performance. The proposed control architecture offers a scalable and flexible solution for grid-forming converters, enabling seamless integration of renewable energy sources. Its robustness and adaptability make it an attractive solution for real-world applications. Furthermore, the approach can be extended to other power electronic systems, enhancing overall system performance and efficiency. By providing a reliable and efficient control strategy, this paper contributes to the advancement of renewable energy systems and their adoption in the energy sector. The proposed control strategy has far-reaching implications for the widespread adoption of renewable energy sources, enabling a more sustainable and efficient energy future. The overall system is modeled in MATLAB/Simulink and PLECS software domain.
grid forming converters (GFM)↗
Virtual Agents-Based Attack-Resilient Distributed Control for Islanded AC Microgrid
Due to its dependence on a communication network, distributed secondary control of microgrids is susceptible to denial-of-service (DoS) attacks in channel shutdown mode, which may negatively impact the network connectivity and thus deteriorate the coordination and power sharing among distributed generators (DGs). Honeypot is a common method for cyber deception by introducing fake targets. However, in the context of microgrid, the misleading information spread by honeypots will also impact the system performance. This paper proposes an attack-resilient distributed control for AC microgrids utilizing virtual agents (VAs) to counteract both DoS edge and node attacks. The VAs are designed to not impact the system’s steady state during normal operation but to share information among neighboring real agents and serve as dummy targets for DoS attacks. The control with VAs is implemented by a primal-dual gradient based distributed algorithm to efficiently obtain a practical solution for voltage/frequency regulation and power sharing. The simulation results on a 4-DG test system and a modified IEEE 34-bus system show that 1) VAs do not impact the normal functionality of the test system, and 2) deploying VAs can enhance the resilience of the microgrid control against DoS edge and node attacks.
24 POWER TRANSMISSION AND DISTRIBUTION↗
3D Virtual Simulation for Radiation Safety and Survey Training
3D virtual technologies have been widely used in remote training. Training integrated with 3D visualization technologies can enhance students’ engagement and reduce cost. The Applied Visualization Lab collaborates with College of Eastern Idaho on creating a 3D desktop application that simulate a pipe environment for radiation safety and survey training. Students can learn to perform radiation and contamination surveys remotely on their desktop. This simulation provides random scenarios, guided instructions, user interactions, and visual and sound feedback. It will promote utilizing virtual training for education outreach and minimize radiation and contamination exposure during the training.
3D↗
3D Virtual Simulation for Radiation Safety and Survey Training
3D virtual technologies have been widely used in remote training. Training integrated with 3D visualization technologies can enhance students’ engagement and reduce cost. The Applied Visualization Lab collaborates with College of Eastern Idaho on creating a 3D desktop application that simulate a pipe environment for radiation safety and survey training. Students can learn to perform radiation and contamination surveys remotely on their desktop. This simulation provides random scenarios, guided instructions, user interactions, and visual and sound feedback. It will promote utilizing virtual training for education outreach and minimize radiation and contamination exposure during the training.
3D↗
Throughput Measurements and Profile Analysis of Cloud Networks
Cloud networks utilize virtual connections to connect virtual machines distributed across cloud sites. They are increasingly deployed due to flexible provisioning using software and cost-effectiveness in not requiring to build physical network infrastructure. However, their extensive virtualization makes it unclear how well the established practices of conventional networks translate to them. Here, we study throughput measurements over a Google Cloud network using a matching hardware emulated conventional network, which provide production and exploratory conditions, respectively. The measurements span connections representing local, cross-continental and around the Earth distances. We study the effects of parallel flows, congestion control algorithms and retransmissions on the network throughput profile expressed as a function of RTT. We compare the throughput profile of Google Cloud network with those of emulated network under various loss conditions, including those too disruptive or expensive in the former. Our analysis based on the concave-convex shape and utilization-concavity coefficients of throughput profiles indicates an overall agreement of performance between the two networks, thereby justifying the use of conventional network emulations to analyze cloud networks. In terms of practical use, our study establishes that BBR and BBRv2 alpha TCP achieve higher throughput compared to loss-based congestion control algorithms under most network configurations, especially, under losses at large RTT.
Phanekham, Derek [Southern Methodist Univ., Dallas↗
High Performance Polymer Blend Membranes for CO2 Capture
Carbon Capture, Storage & Utilization Virtual Forum, July 27, 2021
Zhu, Lingxiang↗
Evaluation of Spray and Combustion Models for Simulating Dilute Combustion in a Direct-Injection Spark-Ignition Engine
Dilute combustion in spark-ignition engines has the potential to improve thermal efficiency by mitigating knock and by reducing throttling and wall heat losses. However, ignition and combustion processes can become unstable for dilute operation due to a lowered laminar flame speed, resulting in excessive cycle-to-cycle variability (CCV) of the combustion process. To compensate for the slower combustion in less reactive mixtures, a modified intake port geometry can be employed to generate a strong tumble flow in the cylinder and elevate turbulence levels around the spark plug, thereby promoting a faster transition to turbulent deflagration. Consequently, optimizing combustion chamber geometry and operating strategy is crucial to maximizing the benefits of using dilute combustion with enhanced in-cylinder turbulence across a wide range of operating conditions. Computational fluid dynamics (CFD) simulations can be utilized for virtual engine optimization tasks, but this would require the models to be truly predictive regarding the impact of changes to the engine design and operational parameters.In this study, multicycle large-eddy simulations (LES) are performed for a direct-injection spark-ignition engine to investigate the model performance in predicting engine combustion characteristics with respect to changes in the intake configuration. A tumble plate that blocks the lower part of the intake port inlet is used to vary the tumble. A set of CFD models that have been recently developed are employed, which takes into account the drag of nonspherical droplets, flash-boiling behavior of liquid sprays, spray-wall interaction, surrogate formulation of a research-grade E10 gasoline, and fast chemical kinetic solvers. Simulation results are compared to experimental engine data in terms of cylinder pressure, apparent heat release rate, mass fraction burned timing, and flame images. It is found that LES employing the state-of-the-art CFD models are capable of properly predicting the spray processes and reproducing the measured mean cylinder pressure for the case with the tumble plate. On the other hand, the LES over-predicts the combustion rate during the early combustion stage and under-estimates the CCV, and these discrepancies become larger when the tumble plate is removed.
computational fluid dynamics simulation↗
Virtual Framework for Science Federations with Instruments Access and Control
Experimental science workflows require federations of geographically dispersed science instruments and computing systems connected over a wide-area network. We develop a Virtual Infrastructure Twin (VIT) framework, which is a digital twin of the physical infrastructure that utilizes network virtualization and containerization technologies to support the development and testing of science workflow codes. Using VIT, we illustrate the access to instruments via EPICS system and the orchestration of containerized computations across federation computing systems. We also present a machine learning method to convert VIT throughput measurements to closely match the corresponding physical testbed measurements.
Rao, Nageswara↗
Virtual to Physical: Reinforcement Learning to Optimize SNS Particle Accelerator Controls
Complex accelerators must have control systems that can handle dynamic nonlinear environments. This makes traditional control methods unsuitable as they can struggle to adapt to these uncertainties. This provides an ideal environment for reinforcement learning algorithms as they are adaptable and generalizable. We present a reinforcement learning pipeline that can effectively handle the dynamics of a complex accelerator. We test and prove our pipelines capabilities on multiple environments including the Spallation Neutron Source (SNS) and the Beam Test Facility (BTF) at Oakridge National Lab (ORNL). Due to the limited time available to train an online algorithm like reinforcement learning on a real accelerator, we utilize a virtual twin accelerator (VIRAC) developed by ORNL to pretrain the policy and show its ability to converge in the virtual environment. We then test the adaptability of the pretrained RL model by applying it on the real accelerator and comparing the results. Utilizing our Scientific Optimization and Controls Toolkit (SOCT) and open-source standards such as Gymnasium we create and solve for a MEBT orbit correction problem in the SNS and an emittance maximization problem in the BTF. We show how Twin Delayed Deep Deterministic Policy Gradient (TD3) can solve this optimization environment in the virtual accelerator and transfer this policy onto the real accelerator for inference and model retraining. We show how reinforcement learning can be utilized as a control system for complex accelerators and provide a model pipeline for how an implementation performs and can be adapted to new accelerator control problems.
Kasparian, Armen [Thomas Jefferson National Accele↗
Quality Control Methods for Advanced Metering Infrastructure Data
While urban-scale building energy modeling is becoming increasingly common, it currently lacks standards, guidelines, or empirical validation against measured data. Empirical validation necessary to enable best practices is becoming increasingly tractable. The growing prevalence of advanced metering infrastructure has led to significant data regarding the energy consumption within individual buildings, but is something utilities and countries are still struggling to analyze and use wisely. In partnership with the Electric Power Board of Chattanooga, Tennessee, a crude OpenStudio/EnergyPlus model of over 178,000 buildings has been created and used to compare simulated energy against actual, 15-min, whole-building electrical consumption of each building. In this study, classifying building type is treated as a use case for quantifying performance associated with smart meter data. This article attempts to provide guidance for working with advanced metering infrastructure for buildings related to: quality control, pathological data classifications, statistical metrics on performance, a methodology for classifying building types, and assess accuracy. Advanced metering infrastructure was used to collect whole-building electricity consumption for 178,333 buildings, define equations for common data issues (missing values, zeros, and spiking), propose a new method for assigning building type, and empirically validate gaps between real buildings and existing prototypes using industry-standard accuracy metrics.
24 POWER TRANSMISSION AND DISTRIBUTION↗
Route-Operable Unmanned Navigation of Drones (ROUNDS)
Slides presented at the UAS for Electric Utilities 2020 Virtual Workshop
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Numerical Optimization of Microwave Reactor Parameters for Direct Methane Aromatization
AIChE: 3rd Natural Gas Utilization Workshop, Virtual, April 24-25, 2021
Muley, Pranjali↗
Computational Modeling of Formation and Adsorption of Mo for Catalytic Activation in ZSM 5: A Density Functional Theory Study
AIChE: 3rd Natural Gas Utilization Workshop, Virtual, April 24-25, 2021
Paudel, Hari P.↗
Encoding integers and rationals on neuromorphic computers using virtual neuron
Abstract Neuromorphic computers emulate the human brain while being extremely power efficient for computing tasks. In fact, they are poised to be critical for energy-efficient computing in the future. Neuromorphic computers are primarily used in spiking neural network–based machine learning applications. However, they are known to be Turing-complete, and in theory can perform all general-purpose computation. One of the biggest bottlenecks in realizing general-purpose computations on neuromorphic computers today is the inability to efficiently encode data on the neuromorphic computers. To fully realize the potential of neuromorphic computers for energy-efficient general-purpose computing, efficient mechanisms must be devised for encoding numbers. Current encoding mechanisms (e.g., binning, rate-based encoding, and time-based encoding) have limited applicability and are not suited for general-purpose computation. In this paper, we present the virtual neuron abstraction as a mechanism for encoding and adding integers and rational numbers by using spiking neural network primitives. We evaluate the performance of the virtual neuron on physical and simulated neuromorphic hardware. We estimate that the virtual neuron could perform an addition operation using just 23 nJ of energy on average with a mixed-signal, memristor-based neuromorphic processor. We also demonstrate the utility of the virtual neuron by using it in some of the μ -recursive functions, which are the building blocks of general-purpose computation.
97 MATHEMATICS AND COMPUTING↗
RESULTS OF A VIRTUAL ROUND ROBIN STUDY TO ESTIMATE PROBABILITY OF DETECTION FOR DISSIMILAR METAL WELDS
This paper presents efforts to overcome challenges with empirical probability of detection (POD) estimations in the nuclear power industry through the utilization of a novel virtual flaw method. A virtual round robin (VRR) study was conducted under the Program for Investigation Of NDE by International Collaboration (PIONIC), organized by the United States Nuclear Regulatory Commission (NRC) utilizing data generated by the virtual flaw method. Analysis of results from the VRR was performed by teams from Pacific Northwest National Laboratory (PNNL), Electric Power Research Institute (EPRI), and Aalto University. Empirically derived POD estimations are presented, and challenges associated with obtaining these estimations are discussed. The virtual flaw method is introduced and some details of its implementation for the VRR activity are described. Results from POD analysis of the VRR data by PNNL, EPRI, and Aalto University are presented and a discussion regarding differences in analysis results is provided. Finally, potential future efforts to improve the application of the virtual flaw method and its estimation of POD are discussed.
Probability of detection, Dissimilar Metal Weld, P↗
Prediction on X-ray output of free electron laser based on artificial neural networks
Abstract Knowledge of x-ray free electron lasers’ (XFELs) pulse characteristics delivered to a sample is crucial for ensuring high-quality x-rays for scientific experiments. XFELs’ self-amplified spontaneous emission process causes spatial and spectral variations in x-ray pulses entering a sample, which leads to measurement uncertainties for experiments relying on multiple XFEL pulses. Accurate in-situ measurements of x-ray wavefront and energy spectrum incident upon a sample poses challenges. Here we address this by developing a virtual diagnostics framework using an artificial neural network (ANN) to predict x-ray photon beam properties from electron beam properties. We recorded XFEL electron parameters while adjusting the accelerator’s configurations and measured the resulting x-ray wavefront and energy spectrum shot-to-shot. Training the ANN with this data enables effective prediction of single-shot or average x-ray beam output based on XFEL undulator and electron parameters. This demonstrates the potential of utilizing ANNs for virtual diagnostics linking XFEL electron and photon beam properties.
47 OTHER INSTRUMENTATION↗