Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transparent conducting oxide materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nonlinear Loss Engineering in Near‐Zero‐Index Bulk Materials

Transparent conducting oxides (TCOs) show unprecedented optical nonlinearities in the near infrared wavelength range, where the real part of their linear refractive index approaches zero. More specifically, the Kerr nonlinearities of these materials have sparked widespread attention due to their magnitude and speed. However, due to the absorptive nature of these nonlinear processes, it is of fundamental interest to further investigate the imaginary component of the nonlinear index. The present work studies the nonlinear optical absorption properties of aluminium‐doped zinc oxide (AZO) thin films in their near‐zero‐index (NZI) spectral window. It is found that the imaginary part of the refractive index is reduced under optical excitation such that the field penetration depth more than doubles. An optically induced shift of the NZI bandwidth of ≈120 nm for a pump intensity of 1.3 TW cm −2 is also demonstrated. Looking into the optically induced spectral redistribution of the probe signal, local net gain is recorded, which is ascribed to a nonlinear adiabatic energy transfer. The present study adds key information about the fundamental interplay between real and imaginary nonlinear indices in NZI media, while advancing parametric amplification as viable direction for loss compensation.

36 MATERIALS SCIENCE↗

Novel Iron-based ternary amorphous oxide semiconductor with very high transparency, electronic conductivity, and mobility

We report that ternary metal oxides of type (Me) 2 O 3 with the primary metal (Me) constituent being Fe (66 atomic (at.) %) along with the two Lanthanide elements Tb (10 at.%) and Dy (24 at.%) can show excellent semiconducting transport properties. Thin films prepared by pulsed laser deposition at room temperature followed by ambient oxidation showed very high electronic conductivity (>5 × 10 4 S/m) and Hall mobility (>30 cm 2 /V-s). These films had an amorphous microstructure which was stable to at least 500 °C and large optical transparency with a direct band gap of 2.85 ± 0.14 eV. This material shows emergent semiconducting behavior with significantly higher conductivity and mobility than the constituent insulating oxides. In conclusion, since these results demonstrate a new way to modify the behaviors of transition metal oxides made from unfilled d- and/or f-subshells, a new class of functional transparent conducting oxide materials could be envisioned.

36 MATERIALS SCIENCE↗

The Role of Phonons and Oxygen Vacancies in Non-Cubic SrVO 3

Combining neutron diffraction with pair distribution function analysis, we have uncovered hidden reduced symmetry in the correlated metallic d 1 perovskite, SrVO 3 . Specifically, we show that both the local and global structures are better described using a GdFeO 3 distorted (orthorhombic) model as opposed to the ideal cubic ABO 3 perovskite type. Recent reports of imaginary phonon frequencies in the density functional theory (DFT)-calculated phonon dispersion for cubic SrVO 3 suggest a possible origin of this observed non-cubicity. Namely, the imaginary frequencies computed could indicate that the cubic crystal structure is unstable at T = 0 K. However, our DFT calculations provide compelling evidence that point defects in the form of oxygen vacancies, and not an observable symmetry breaking associated with calculated imaginary frequencies, primarily result in the observed non-cubicity of SrVO 3 . These experimental and computational results are broadly impactful because they reach into the thin-film and theoretical communities who have shown that SrVO 3 is a technologically viable transparent conducting oxide material and have used SrVO 3 to develop theoretical methods, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

W-doped anatase TiO{sub 2} transparent conductive oxide films: Theory and experiment

W-doped anatase TiO{sub 2} films were deposited on glass substrate by magnetron cosputtering. The minimum resistivity, 1.5x10{sup -2} {Omega} cm, for Ti{sub 1-x}W{sub x}O{sub 2} film (x=0.063) was obtained. X-ray photoelectron spectroscopy analysis shows W incorporated in the Ti lattice position is mostly in the W{sup 6+} state. Theoretical calculations based upon the density-functional theory were applied to analyze the electronic structure and conducting mechanism. The strong hybridization of Ti 3d states with W 5d states is the dominate factor to cause the shifting in Fermi level into conduction band. Our results suggest that tungsten is a favorable dopant to form TiO{sub 2}-based transparent conducting oxide materials.

36 MATERIALS SCIENCE↗

Few-cycle optical field breakdown and damage of gallium oxide and gallium nitride

Both gallium oxide and gallium nitride have great potential for use as high power transparent conducting oxide materials for a wide range of optoelectronic applications. It is, therefore, important to determine the dynamic optical field breakdown for these materials. Here, we report laser damage thresholds for Ga 2 O 3 and GaN using 9 fs few-cycle pulses with a center wavelength near 760 nm. We determine laser-induced damage thresholds (LIDTs) for both single pulse and multi-pulse exposures, with multi-pulse LIDT showing significant reduction compared to single pulse LIDT (in some cases, >50%), possibly due to laser-induced defects. We show that Ga 2 O 3 and GaN have an ultrafast optical field breakdown of 23 and 18 GV/m when nearly polarized along their [010] and [111] planes, respectively, extending their suitability for high power applications to the ultrashort pulse regime. To accurately characterize the excited carrier density criteria in which apparent laser damage occurs, carrier excitation dynamics for the entire laser pulse interaction were simulated using a modified Keldysh ionization model. For the measured single-shot threshold fluences, the plasma critical density was surpassed by 2 orders of magnitude and 2D finite-difference time-domain simulations were employed to understand the pulse interaction near the surface.

Tripepi, Michael↗

Preface

Preface to the special issue of Thin Solid Films covering the 9th International Symposium on Transparent Oxide Thin Films for Electronics and Optics (TOEO-9).

14 SOLAR ENERGY↗

Investigating the Defect Structures in Transparent Conducting Oxides Using X-ray and Neutron Scattering Techniques

Transparent conducting oxide (TCO) materials are implemented into a wide variety of commercial devices because they possess a unique combination of high optical transparency and high electrical conductivity. Created during the processing of the TCOs, defects within the atomic-scale structure are responsible for their desirable optical and electrical properties. Therefore, studying the defect structure is essential to a better understanding of the behavior of transparent conductors. X-ray and neutron scattering techniques are powerful tools to investigate the atomic lattice structural defects in these materials. This review paper presents some of the current developments in the study of structural defects in n-type TCOs using x-ray diffraction (XRD), neutron diffraction, extended x-ray absorption fine structure (EXAFS), pair distribution functions (PDFs), and x-ray fluorescence (XRF).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The 2019 materials by design roadmap

Advances in renewable and sustainable energy technologies critically depend on our ability to design and realize materials with optimal properties. Materials discovery and design efforts ideally involve close coupling between materials prediction, synthesis and characterization. Increased use of computational tools, the generation of materials databases, and advances in experimental methods have substantially accelerated these activities. It is therefore an opportune time to consider future prospects for materials by design approaches. The purpose of this roadmap is to present an overview of the current state of computational materials prediction, synthesis and characterization approaches, materials design needs for various technologies, and future challenges and opportunities that must be addressed. Perspectives cover topics on computational techniques, validation, materials databases, materials informatics, high-throughput combinatorial methods, advanced characterization approaches, and materials design issues in thermoelectrics, photovoltaics, solid state lighting, catalysts, batteries, metal alloys, complex oxides and transparent conducting materials. It is our hope that this roadmap will guide researchers and funding agencies in identifying new prospects for materials design.

36 MATERIALS SCIENCE↗

The Role of Cation Coordination in the Electrical and Optical Properties of Amorphous Transparent Conducting Oxides

Amorphous oxide semiconductor materials have demonstrated numerous advantages without compromise of electrical properties as compared to their crystalline counterparts, yet understanding of the fundamental principles allowing this has remained elusive. To study the origins of enhanced optoelectronic properties, we apply high-throughput, combinatorial sputtering, structural and spectral mapping, and computationally intensive ab initio molecular dynamics simulations with density functional theory to a ternary, post-transition metal oxide system, namely, zinc tin oxide. The deposited thin films exhibit a high figure of merit, achieving carrier densities in the range of 1019 to 1020 cm–3 and carrier mobilities up to 35 cm2/Vs. These results highlight the role of local distortions and cation coordination in determining the microscopic origins of carrier generation and transport. In particular, we identify the strong likelihood of Sn undercoordination in both Zn-poor and Zn-rich phases leading to the high carrier concentrations observed. This not only diverges from the still widespread historical indictment of oxygen vacancies controlling carrier population in crystalline oxides but also provides a comprehensive framework to describe the unique structure–property relationships using specific structural and electronic descriptors in disordered phase materials.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,M↗

Abnormal Pressure-Induced Photoluminescence Enhancement and Phase Decomposition in Pyrochlore La 2 Sn 2 O 7

La 2 Sn 2 O 7 is a transparent conducting oxide (TCO) material and shows a strong near-infrared fluorescent at ambient pressure and room temperature. By in situ high-pressure research, pressure-induced visible photoluminescence (PL) above 2 GPa near 2 eV is observed. The emergence of unusual visible PL behavior is associated with the seriously trigonal lattice distortion of the SnO 6 octehedra, under which the Sn–O1–Sn exchange angle θ is decreased below 22.1 GPa, thus enhancing the PL quantum yield leading to Sn 3 P 1 → 1 S 0 photons transition. Besides, bandgap closing followed by bandgap opening and the visible PL appearing at the point of the gap reversal, which is consistent with high-pressure phase decomposition, are discovered. The high-pressure PL results demonstrate a well-defined pressure window (7–17 GPa) with flat maximum PL yielding and sharp edges at both ends, which may provide a great calibration tool for pressure sensors for operation in the deep sea or at extreme conditions.

36 MATERIALS SCIENCE↗

Electron emission of Au nanoparticles embedded in ZnO for highly conductive oxide

We investigated the effect of embedded Au nanoparticles (Au NPs) on electrical properties of zinc oxide (ZnO) for highly conductive oxide semiconductor. Au NPs in ZnO films influenced both the structural and electrical properties of the mixture films. The electrical resistivity decreases by as much as five orders of magnitude. This is explained by the electron emission from Au NPs to the ZnO matrix. Temperature-dependent Hall effect measurements show that an electron emission mechanism changes from tunneling to thermionic emission at T = 180 K. The electron mobility in the mixture film is mainly limited by the grain boundaries at lower temperature (80-180 K), and the Au/ZnO heterogeneous interface at higher temperature (180-340 K). In addition to the electron emission, embedded Au NPs alter the ZnO matrix microstructure and improve the electron mobility. Compared to the undoped ZnO film, the carrier concentration of the Au NP-embedded ZnO film can be increased by as much as six orders of magnitude with a small change in the carrier mobility. This result suggests a way to circumvent the inherent tradeoff between the carrier concentration and the carrier mobility in transparent conductive oxide (TCO) materials.

36 MATERIALS SCIENCE↗

Transition in electron scattering mechanism in atomic layer deposited Nb:TiO{sub 2} thin films

We characterized transport and optical properties of atomic layer deposited Nb:TiO{sub 2} thin films on glass substrates. These promising transparent conducting oxide (TCO) materials show minimum resistivity of 1.0 × 10{sup −3 }Ω cm at 300 K and high transmittance in the visible range. Low-temperature (2–300 K) Hall measurements and the Drude fitting of the Vis-NIR optical spectra indicate a transition in the scattering mechanism from grain boundary scattering to intra-grain scattering with increasing Nb content, thus underlining enhancement of the grain size in the low doping regime as the key for further improved TCO properties.

36 MATERIALS SCIENCE↗

New route of phase transition for enhanced TCO property of ZnO: A first-principles study

The ZnO is one of the best transparent conducting oxide (TCO) materials for optoelectronic properties. Primarilly three phases of ZnO namely wurtzite, rocksalt and zincblend along with other prominent phases under different pressure and with different phase transformation routes are reported. The route of phase transformation may differ and depends on the external parameters such as pressure. The conventional route for the phase transformation of wurtzite (B4) phase into CsCl type (B2) phase via rocksalt phase (B1) is estimated at the relatively high pressure value of the 256 GPa. In present paper, we propose a new route of transformation of B4 to B2 phase of ZnO via β-BeO type phase at relatively low pressure value of 43 GPa. In present study, the phase transformation analysis and the electronic structure analysis for different phases are carried out by using density functional theory (DFT). It is also observed that B2 phase have high dispersive nature of bottom of conduction band and consequently high mobility of charge carriers. It indicates the possibility of B2 phase may have better TCO properties among other phases of ZnO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of interacting polaronic gas behavior in Ta-doped TiO 2 thin films via terahertz time-domain spectroscopy

Transparent conductive oxides (TCOs)—materials that have the twin desirable features of high optical transmission and electrical conductivity—play an increasingly significant role in the fields of photovoltaics and information technology. As an excellent TCO, Ta-doped anatase TiO 2 shows great promise for a wide range of applications. Here, terahertz time-domain spectroscopy is used to study the complex optical conductivity $\tilde{σ}$ (ω) of the TCO—heavily Ta-doped TiO 2 thin films with different Ta-doping concentrations, in the frequency range of 0.3–2.7 THz and the temperature range of 10–300 K. Fitting the complex optical conductivity to a Drude-like behavior allows us to extract the temperature dependence of the effective mass, which suggests the existence of many-body large polarons. Moreover, the carrier scattering rate of Ta-doped TiO 2 with different carrier concentrations agrees with the interacting polaron gas theory. Our results suggest that with increasing electron density in TiO 2 , the interaction between polarons is larger and electron–phonon coupling is smaller, which is beneficial for achieving high mobility and conductivity in TiO 2 .

36 MATERIALS SCIENCE↗

Transparent conducting oxides and production thereof

Transparent conducting oxides and production thereof are disclosed. An exemplary method of producing a transparent conducting oxide (TCO) material may comprise: providing a TCO target (110) doped with either a high-permittivity oxide or a low-permittivity oxide in a process chamber (100). The method may also comprise depositing a metal oxide on the target (110) to form a thin film having enhanced optical properties without substantially decreasing electrical quality.

36 MATERIALS SCIENCE↗