Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transfer scenario”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Protocol Architecture Model Report

NASA's Glenn Research Center (GRC) defines and develops advanced technology for high priority national needs in communications technologies for application to aeronautics and space. GRC tasked Computer Networks and Software Inc. (CNS) to examine protocols and architectures for an In-Space Internet Node. CNS has developed a methodology for network reference models to support NASA's four mission areas: Earth Science, Space Science, Human Exploration and Development of Space (REDS), Aerospace Technology. This report applies the methodology to three space Internet-based communications scenarios for future missions. CNS has conceptualized, designed, and developed space Internet-based communications protocols and architectures for each of the independent scenarios. The scenarios are: Scenario 1: Unicast communications between a Low-Earth-Orbit (LEO) spacecraft inspace Internet node and a ground terminal Internet node via a Tracking and Data Rela Satellite (TDRS) transfer; Scenario 2: Unicast communications between a Low-Earth-Orbit (LEO) International Space Station and a ground terminal Internet node via a TDRS transfer; Scenario 3: Multicast Communications (or "Multicasting"), 1 Spacecraft to N Ground Receivers, N Ground Transmitters to 1 Ground Receiver via a Spacecraft.

Dhas, Chris↗
NASA NTRS2018

Low-Thrust Trajectory Design via Direct Transcription Leveraging Structure from the Low-Thrust Restricted Problem

A primary challenge of low-thrust mission design is the development of an initial guess for the state and control history of a trajectory. To address this challenge, one technique assembles dynamical structures, such as periodic orbits and their associated manifolds, into discontinuous chains that are corrected to locally optimal transfer solutions via direct transcription. In this investigation, dynamical structures that leverage low-thrust in a multi-body regime are incorporated into the orbit chain approach to expand the options available for construction of an initial guess and to guide the direct transcription algorithm toward different categories of locally optimal solutions. The properties and structures of the low-thrust model which facilitate orbit chain construction are demonstrated in representative transfer scenarios. Direct transcription is applied to converge upon locally optimal transfer trajectories in both simplified and ephemeris models. Results indicate that low-thrust dynamical structures offer a promising new catalog of options for use in the orbit chain approach to designing optimal low-thrust trajectories.

Grebow, Daniel↗
NASA NTRS2023

NASA Space Environment Analog for Training, Engineering, Science, and Technology (SEATEST) 6 Detailed Final Report

After more than 50 years since the last crewed lunar landing, plans for more missions to the moon are in development. For these missions, efficient and sustainable logistics will be critical. Additionally, innovative methods of cargo transfer to and from a lunar outpost should be considered for successfully establishing a permanent presence on the moon. SEATEST (Space Environment Analog for Training, Engineering, Science, and Technology) is an immersive mission-analogous operational atmosphere where buoyancy effects and supplemental weights can simulate partial gravity conditions similar to those astronauts will experience on the moon. SEATEST 6 took place at the University of Southern California (USC) Wrigley Marine Science Center on Santa Catalina Island from July 18-30, 2023. The analog was used to collect preliminary logistics data on two different offloading conceptual methods (a davit and a zipline) during a simulated lunar mission. Pre-test analysis indicated for a crew of two on a 14-day mission, approximately three Medium Pressurized Logistics Containers (MPLC) sized logistics containers (or a total of 37.5 single Cargo Transfer Bag Equivalents (CTBE)) would be needed to support a mission. A Computer-Aided Design (CAD) analysis was employed on the SEATEST airlock mockup to determine how many logistic containers would fit with two suited crewmembers, don/doff stands, and hatch operations. It was determined that for SEATEST, a total of 15 1.0 Small Pressurized Logistics Containers (SPLCs) and 8 2.0 SPLCs would adequately fit into the approximate 9.5 cubic meter airlock volume. This does not fully represent a complete 14-day logistic supply; however, it does provide a preliminary estimate to initiate design conversations between logistics teams and crew at this early stage of development. Data were collected in eight logistics transfer scenarios over two days with four scenarios per day. Five test subject crew participated in scenarios as pairs. Scenarios included two sizes of logistics containers – 1.0 SPLC (equivalent to a single Cargo Transfer Bag (CTB) and 2.0 SPLC (equivalent to two CTBs). Planed evaluations included the use of a logistics port compared to transfer through an Airlock hatch, offloading methods based on either a davit or a zipline system, choreography of cargo in the airlock to permit ingress and suit doffing, and dust removal protocols for an understanding of the overall impact to transfer ops. Data collected included objective data (task times for conducting overall tasks and subtasks, full audio/video of test activities, and inadvertent “dings” on hardware) and subjective data (crew consensus of: task acceptability and capability assessment ratings related to best practices, considerations, and constraints for EVA-driven logistics transfer ConOps, sim quality of the test environment, and more general debrief comments). The two logistic offloading transfer concepts (davit, zipline) presented both advantages and limitations. The davit’s flexibility in allowing the crew to pick up the containers without physical interaction was well regarded by the crew. Some limitations of select davit hardware components were noted, but the overall concept was acceptable. The zipline system proved to be the most efficient way of moving logistics from the lander to the airlock and eliminated the need for dust operations. However, extended and repetitive lifting of containers to the line could be fatiguing. In conclusion, logistics transfer could hypothetically be achieved without an offloading method; however, the time requirement for such operations would be prohibitive. Results of crew subjective feedback proposed a combined or hybrid davit/zipline method to increase efficiency.

Logistics↗
DOE OSTI2020

Active Temporal Control of Radiative Heat Transfer with Graphene Nanodisks

The ability to dynamically control the radiative transfer of heat at the nanoscale holds the key to the development of a diverse number of technologies, ranging from nanoscale thermal-management systems to improved thermophotovoltaic devices. Recently, graphene has emerged as an ideal material to achieve this goal, since it can be electrically doped to support surface plasmons, collective oscillations of the conduction electrons. These resonances produce large and spectrally narrow optical cross sections, which dictate the emission and absorption properties of the graphene nanostructure and, thus, the heat that it radiatively exchanges with other objects and the environment. For attainable levels of doping, the plasmons supported by graphene nanostructures naturally lie in the midinfrared part of the spectrum, which is the most relevant wavelength range for radiative heat transfer under realistic temperatures. Furthermore, these resonances are actively tunable, thus providing full dynamic control over the heat transfer. Motivated by this great potential, we present a comprehensive analysis of the temporal evolution of the radiative heat transfer between arrangements of graphene nanodisks, showing that it is possible to exploit the tunability of these structures to obtain actively controlled heat transfer scenarios not possible with conventional passive nanostructures. We report the results of this work provide a framework for achieving fully dynamical control over nanoscale radiative heat transfer and thus provide fundamental insights into this process.

36 MATERIALS SCIENCE↗
DOE OSTI2021

WLCG Token Usage and Discovery

Since 2017, the Worldwide LHC Computing Grid (WLCG) has been working towards enabling token based authentication and authorisation throughout its entire middleware stack. Following the publication of the WLCG Common JSON Web Token (JWT) Schema v1.0 [1] in 2019, middleware developers have been able to enhance their services to consume and validate the JWT-based [2] OAuth2.0 [3] tokens and process the authorization information they convey. Complex scenarios, involving multiple delegation steps and command line flows, are a key challenge to be addressed in order for the system to be fully operational. This paper expands on the anticipated token based workflows, with a particular focus on local storage of tokens and their discovery by services. The authors include a walk-through of this token flow in the RUCIO managed data-transfer scenario, including delegation to FTS and authorised access to storage elements. Next steps are presented, including the current target of submitting production jobs authorised by Tokens within 2021.

Bockelman, Brian↗
NASA NTRS1993

Chromospherically active stars. 6: Giants with compact hot companions and the barium star scenario

We have determined spectroscopic orbits for three chromospherically active giants that have hot compact companions. They are HD 160538 (K0 III + wd, P = 904 days), HD 165141 (G8 III + wd, P approximately 5200 days), and HD 185510 (K0 III + sdB, P = 20.6619 days). By fitting an IUE spectrum with theoretical models, we find the white dwarf companion of HD 165141 has a temperature of about 35000 K. Spectral types and rotational velocities have been determined for the three giants and distances have been estimated. These three systems and 39 Ceti are compared with the barium star mass-transfer scenario. The long-period mild barium giant HD 165141 as well as HD 185510 and 39 Ceti, which have relatively short periods and normal abundance giants, appear to be consistent with this scenario. The last binary, HD 160538, a system with apparently near solar abundances, a white dwarf companion, and orbital characteristics similar to many barium stars, demonstrates that the existence of a white-dwarf companion is insufficient to produce a barium star. The paucity of systems with confirmed white-dwarf companions makes abundance analyses of HD 160538 and HD 165141 of great value in examining the role of metallicity in barium star formation.

Fekel, Francis C.↗
NASA NTRS1993

Chromospherically active stars. 11: Giant with compact hot companions and the barium star scenario

We have determined spectroscopic orbits for three chromsopherically active giants that have hot compact companions. They are HD 160538 (KO III + wd, P = 904 days), HD 165141 (G8 III + wd, P approximately 5200 days), and HD 185510 (KO III + sdB, P = 20.6619 days). By fitting an IUE spectrum with theoretical models, we find the white dwarf companion of HD 165141 has a temperature of about 35,000 K. Spectral types and rotational velocities have been determined for the three giants and distances have been estimated. These three systems and 39 Ceti are compared with the barium star mass-transfer scenario. The long-period mild barium giant HD 165141 as well as HD 185510 and 39 Ceti, which have relatively short periods and normal abundance giants, appear to be consistent with this scenario. The last binary, HD 160538, a system with apparently near solar abundances, a white dwarf companion, and orbital characteristics similar to many barium stars, demonstrates that the existence of a white dwarf companion is insufficient to produce a barium star. The paucity of systems with confirmed white dwarf companions makes abundance analyses of HD 160538 and HD 165141 of great value in examining the role of metallicity in barium star formation.

Fekel, Francis C.↗
DOE OSTI2021

Control of airborne infectious disease in buildings: Evidence and research priorities

The evolution of SARS-CoV-2 virus has resulted in variants likely to be more readily transmitted through respiratory aerosols, underscoring the increased potential for indoor environmental controls to mitigate risk. Use of tight-fitting face masks to trap infectious aerosol in exhaled breath and reduce inhalation exposure to contaminated air is of critical importance for disease control. Administrative controls including the regulation of occupancy and interpersonal spacing are also important, while presenting social and economic challenges. Indoor engineering controls including ventilation, exhaust, air flow control, filtration, and disinfection by germicidal ultraviolet irradiation can reduce reliance on stringent occupancy restrictions. However, the effects of controls-individually and in combination-on reducing infectious aerosol transfer indoors remain to be clearly characterized to the extent needed to support widespread implementation by building operators. We review aerobiologic and epidemiologic evidence of indoor environmental controls against transmission and present a quantitative aerosol transfer scenario illustrating relative differences in exposure at close-interactive, room, and building scales. We identify an overarching need for investment to implement building controls and evaluate their effectiveness on infection in well-characterized and real-world settings, supported by specific, methodological advances. Finally, improved understanding of engineering control effectiveness guides implementation at scale while considering occupant comfort, operational challenges, and energy costs.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Globus service enhancements for exascale applications and facilities

Many extreme-scale applications require the movement of large quantities of data to, from, and among leadership computing facilities, as well as other scientific facilities and the home institutions of facility users. These applications, particularly when leadership computing facilities are involved, can touch upon edge cases (e.g., terabyte files) that had not been a focus of previous Globus optimization work, which had emphasized rather the movement of many smaller (megabyte to gigabyte) files. We report here on how automated client-driven chunking can be used to accelerate both the movement of large files and the integrity checking operations that have proven to be essential for large data transfers. In conclusion, we present detailed performance studies that provide insights into the benefits of these modifications in a range of file transfer scenarios.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1985

HD 160538 and HD 185510 - Two active-chromosphere stars with hot companions

Short-wavelength ultraviolet spectra of two active-chromosphere giants, HD 160538 and HD 185510, show hot stellar continua and L-alpha absorption features. The hot companion of HD 160538 is a white dwarf whose ultraviolet spectrum is matched best to the energy distribution of a T(eff) = 30,000 K and log g = 8 model atmosphere. The ultraviolet spectrum of HD 185510 shows numerous absorption features and is identified as a B subdwarf. Since the giant star of each of these binary systems has no known abundance anomalies, these systems appear to be consistent with the mass-transfer scenario of barium-star formation.

Fekel, F. X.↗
NASA NTRS1990

Integrated support structure for GASCAN 2

The focus of the Worcester Polytechnic Institute (WPI) Advanced Space Design Program was the preliminary design of the Integrated Support Structure for GASCAN II, a Get Away Special canister donated by the MITRE Corporation. Two teams of three students each worked on the support structure. There was a structural design team and a thermal design team. The structure will carry three experiments also undergoing preliminary design this year, the mu-gravity Ignition Experiment, the Rotational Flow in Low Gravity Experiment, and the Ionospheric Properties and Propagation Experiment. The structural design team was responsible for the layout of the GASCAN and the preliminary design of the structure itself. They produced the physical interface specifications defining the baseline weights and volumes for the equipment and produced layout drawings of the system. The team produced static and modal finite element analysis of the structure using ANSYS. The thermal design team was responsible for the power and timing requirements of the payload and for the identification and preliminary analysis of potential thermal problems. The team produced the power, timing, and energy interface specifications and assisted in the development of the specification of the battery pack. The thermal parameters of each experiment were cataloged and the experiments were subjected to worst case heat transfer scenarios.

Source record↗
NASA NTRS2004

Synthesis and Luminescent Chemosensory Behavior of N,N'-bis(p-aminophenyl)-1,5-bis(p-(tetraethyleneglycoloxy)phenyl)anthracene-2,3,6,7-tetracarboxyl bisimide

We have utilized the photoenolization reaction of a dibenzoyl-p-xylene derivative to synthesize two new, highly substituted anthracene-based molecules. ABI-NO2 and ABI-NH2 maintained photostability with longer wavelength absorption and emission spectra as compared to unsubstituted anthracene. Conversion of the periphery nitro groups to amines created an internal photoinduced electron transfer scenario that quenched the luminescence of ABI-NH2. Reversible or irreversible reaction of the attached amines resulted in fluorescence recovery. Sensitivity, of ABI-NH2 and other potential derivatives, to toxic chemicals may prove useful for early detection systems.

Ilhan, Faysal↗
DOE OSTI2025

Real-Twin

Real-Twin is a unified, model-agnostic scenario generation tool designed to streamline and standardize the evaluation of emerging mobility technologies. It provides an end-to-end framework that includes robust workflows, integrated tools, and comprehensive metrics to generate, calibrate, and benchmark microscopic traffic simulation scenarios across multiple platforms. Key Features of Real-Twin include: - Unified Scenario Generation: generate transferable, simulation-ready scenarios from heterogeneous data sources using a consistent workflow. - Automated Calibration Workflow: bridges simulation and real-world data, minimizing manual effort and making traffic simulation more accessible to researchers and engineers. - Model-Agnostic Compatibility: supports SUMO, VISSIM, and AIMSUN for cross-platform scenario generation and benchmarking. Enables reliable comparisons and reproducibility across different simulation tools. - Consistent Scenarios across Different Simulators: generate comparable simulation scenarios across different microscopic traffic simulators, providing users the ability to conduct benchmarking and cross-validation that are crucial for ensuring the reliability and reproducibility of simulation results. - Emerging Technology Support: includes a scenario database and pipeline for studying autonomous vehicles (AVs), with planned extensions to CAVs, EVs, and other advanced technologies.

Wang, Chieh (Ross) [Oak Ridge National Laboratory ↗
DOE OSTI2022

Deep transfer operator learning for partial differential equations under conditional shift

Transfer learning enables the transfer of knowledge gained while learning to perform one task (source) to a related but different task (target), hence addressing the expense of data acquisition and labelling, potential computational power limitations and dataset distribution mismatches. Here, we propose a new transfer learning framework for task-specific learning (functional regression in partial differential equations) under conditional shift based on the deep operator network (DeepONet). Task-specific operator learning is accomplished by fine-tuning task-specific layers of the target DeepONet using a hybrid loss function that allows for the matching of individual target samples while also preserving the global properties of the conditional distribution of the target data. Inspired by conditional embedding operator theory, we minimize the statistical distance between labelled target data and the surrogate prediction on unlabelled target data by embedding conditional distributions onto a reproducing kernel Hilbert space. We demonstrate the advantages of our approach for various transfer learning scenarios involving nonlinear partial differential equations under diverse conditions due to shifts in the geometric domain and model dynamics. Our transfer learning framework enables fast and efficient learning of heterogeneous tasks despite considerable differences between the source and target domains.

42 ENGINEERING↗
DOE OSTI2020

Preliminary Criticality and Radiation Shielding Analysis for the Storage and Transfer of MARVEL Reactor Spent Nuclear Fuel

This report documents the results of preliminary nuclear criticality and radiation shielding assessments during transfer and dry storage of irradiated Microreactor Applications Research Validation and Evaluation (MARVEL) reactor fuel at Idaho National Laboratory (INL). The assessments focus on transfer casks and storage canisters that are currently in use at INL, which may be compatible with the irradiated MARVEL reactor fuel. The criticality assessments were performed using the radiation transport code MCNP6 with 37 MARVEL reactor fuel elements in various configurations and scenarios. All transfer and storage configurations under dry conditions were below the assumed criticality safety limit of 0.93. Some storage and transfer configurations under wet conditions exceeded the criticality safety limit. This suggests that the appropriate administrative and engineering controls, in addition to reducing the number of MARVEL reactor fuel elements per transfer cask or storage canister, can be expected to ensure criticality safety under all scenarios. The radiation shielding assessments were performed by generating conservative neutron and photon source terms using the ORIGEN module in the SCALE suite of codes. These source spectra were used to estimate the dose equivalent rates using the radiation transport code MCNP6, both on contact and 1 m away from the fuel and transfer casks. The maximum estimated dose equivalent rate of 37 unshielded MARVEL reactor fuel elements on contact is approximately 42000 R/hr. The maximum estimated dose equivalent rates on contact to the ATR transfer cask, HFEF-5 transfer cask, and high load charger were approximately 233 mR/hr, 171 mR/hr, and 201 mR/hr, respectively. This suggests that with the appropriate administrative and engineering controls, all three transfer casks analyzed can be expected to provide sufficient radiation shielding to workers during transfer of irradiated MARVEL reactor fuel. These calculations are performed to support the planning and strategy for the MARVEL project and will demonstrate the technical viability of the different configurations discussed and help identify where engineered or administrative controls may be necessary. A complete criticality safety analysis and radiation shielding analysis, including validation and contingency and accident analysis must be completed by licensed and authorized personnel before any transfer or storage of MARVEL reactor nuclear fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Driver Distraction Behavior Detection using a Vision Transformer Model based on Transfer Learning Strategy

Driver distraction behavior is one of the critical factors in traffic accidents. Thus, advanced driver state detection system has become the focus in the field of intelligent vehicle. However, in practical applications, insufficient samples of driving distraction behaviors bring great challenges to training a personalized behavior distraction detection model for a specific driver. To this end, a novel transformer model based on a transfer learning strategy is proposed in this paper to accurately recognize driver distraction behavior. Inspired by the effect of the transformer network in visual recognition, we firstly present a transformer behavior distraction detection system to identify the behavior categories that cause driver distraction. Then, for the specific driving dataset in practical application scenarios, the transfer learning strategy is introduced into the driver distraction detection model to further train the general transformer network. The effectiveness of the transformer based on the transfer learning strategy is validated compared with other traditional deep learning methods. The results show that the proposed detection method has better generalization ability and higher accuracy.

Fang, Zhenwu↗