Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transceiver”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Hong-Ou-Mandel interference with a coexisting clock using transceivers for synchronization over deployed fiber

Interference between independently generated photons is a key step towards distributing entanglement over long distances, but it requires synchronization between the distantly-located photon sources. Synchronizing the clocks of such photon sources using coexisting two-way classical optical communications over the same fiber that transports the quantum photonic signals is a promising approach for achieving photon-photon interference over long distances, enabling entanglement distribution for quantum networking using the deployed fiber infrastructure. Here, we demonstrate photon-photon interference by observing the Hong-Ou-Mandel dip between two distantly-located sources: a weak coherent-state source obtained by attenuating the output of a laser and a heralded single-photon source. We achieve a maximum dip visibility of 0.58 +/- 0.04 when the two sources are connected via 4.3 km of deployed fiber. Dip visibilities > 0.5 are nonclassical and a first step towards achieving teleportation over the deployed fiber infrastructure. In our experiment, the classical optical communication is achieved with - 21 dBm of optical signal launch power, which is used to synchronize the clocks in the two independent, distantly-located photon sources. The impact of spontaneous Raman scattering from the classical optical signals is mitigated by appropriate choice of the quantum- and classical-channel wavelengths. All equipment used in our experiment (the photon sources and the synchronization setup) is commercially available. Finally, our experiment represents a scalable approach to enabling practical quantum networking with commercial equipment and coexistence with classical communications in optical fiber.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Multi-chip photonics transceiver

A photonics transceiver is described herein, wherein the photonics transceiver exhibits improved areal bandwidth density and improved energy per bit consumption relative to conventional photonics transceivers. The photonics transceiver achieves an areal bandwidth density of at least 5 Tbps/mm2 with an energy consumption of less than 500 fJ/bit (sum of energy consumed for both a transmitted bit and a received bit). The photonics transceiver is a multi-chip module, where chips in the multi-chip module are tightly integrated with one another. The multi-chip module includes light source, photodetector, photonics, and control/logic chips. The photonics chip includes transparent conducting oxide integrated optical modulators and multiplexers and demultiplexers based on MEMS-tunable optical ring resonators.

Wood, Michael↗
DOE OSTI2023

Acoustic scattering by smooth elastic cylinders insonified by directional transceivers: Monostatic theory and experiments

A theoretical model for predicting the acoustic field scattered by an elastic cylinder that is partially insonified by a directional transceiver is proposed in the form of a simple approximate one-dimensional integral. This model accounts for spherical spreading and directivity of the incident waves and extends the formulation used in a preceding article by including effects due to oblique insonification of a long cylinder assuming negligible end-contributions. The scattered field of an infinitely long cylinder for obliquely incident plane waves and point receivers is used to approximate the apparent volume flow of cylinders partially insonified by directional transceivers. The scattered pressure that is derived using the apparent volume flow, in contrast to the previous formulation, is capable of predicting axially propagating guided wave resonances; these natural modes are excited, in addition to circumferential ones, at off-normal incident angles. The model is compared with exact numerical simulations and with previously published as well as new laboratory data. The analysis illustrates the different realistic effects associated with scattering from elastic cylinders insonified by a directional transceiver both theoretically and experimentally.

42 ENGINEERING↗
DOE OSTI2020

Versatile Link+ Transceiver Production Readiness

The Versatile Link + project is about to enter its production phase, ready for the Phase 2 HL-LHC detector upgrades. We present the status of the front-end part of the Versatile Link$^+$ project: the Versatile Link$^+$ Transceiver, which provides a low-mass, radiation tolerant, optical transmit- and receive module for tight integration in the upgrading HL-LHC detectors. We describe the development and thorough testing carried out with the transceiver prototypes and their sub-components and the design decisions that have led to the final production-ready prototype. The planned production schedule is also presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Integrated energy harvesting transceivers and transmitters with dual-antenna architecture for miniaturized implants and electrochemical sensors

Systems and methods for utilizing a small form-factor, wirelessly powered transceiver are disclosed. In one embodiment, a wireless powered transceiver includes a receive antenna configured to receive a receive signal, a transmit antenna configured to transmit a transmit signal, a power harvesting system including a rectifier circuit configured convert radio frequency energy from the receive signal into DC (direct current) voltage, and a power management unit (PMU) configured to set the operating mode and biasing condition of the receive and transmit circuitry blocks and provide DC voltage from the receive circuitry block to the transmit circuitry block to maintain a minimum voltage, a receiver circuitry block configured to provide energy from the receive signal to the power harvesting system, and a transmitter circuitry block including a data modulator circuit, the data modulator circuit configured to generate the transmit signal using DC voltage received from the power management unit.

Babakhani, Aydin↗
DOE OSTI2024

Integrated energy harvesting transceivers and transmitters with dual-antenna architecture for miniaturized implants and electrochemical sensors

Systems and methods for utilizing a small form-factor, wirelessly powered transceiver are disclosed. In one embodiment, a wireless powered transceiver includes a receive antenna configured to receive a receive signal, a transmit antenna configured to transmit a transmit signal, a power harvesting system including a rectifier circuit configured convert radio frequency energy from the receive signal into DC (direct current) voltage, and a power management unit (PMU) configured to set the operating mode and biasing condition of the receive and transmit circuitry blocks and provide DC voltage from the receive circuitry block to the transmit circuitry block to maintain a minimum voltage, a receiver circuitry block configured to provide energy from the receive signal to the power harvesting system, and a transmitter circuitry block including a data modulator circuit, the data modulator circuit configured to generate the transmit signal using DC voltage received from the power management unit.

Babakhani, Aydin↗
DOE OSTI2020

Characterization of a gigabit transceiver for the ATLAS inner tracker pixel detector readout upgrade

We present a gigabit transceiver prototype Application Specific Integrated Circuit (ASIC), GBCR, for the ATLAS Inner Tracker (ITk) Pixel detector readout upgrade. GBCR is designed in a 65-nm CMOS technology and consists of four upstream receiver channels, a downstream transmitter channel, and an Inter-Integrated Circuit (I2C) slave. The upstream channels receive the data at 5.12 Gbps passing through 5-meter 34-American Wire Gauge (AWG) Twin-axial (Twinax) cables, equalize and retime them with a recovered clock, and then drive an optical transmitter. The downstream channel receives the data at 2.56 Gbps from an optical receiver and drives the cable as same as the upstream channels. The jitter of the upstream channel output is measured to be 35 ps (peak-peak) when the Clock-Data Recovery (CDR) module is turned on and the jitter of the downstream channel output after the cable is 138 ps (peak-peak). The power consumption of each upstream channel is 72 mW when the CDR module is turned on and the downstream channel consumes 27 mW. GBCR survives the total ionizing dose of 200 kGy.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Dual frequency transceiver device

A transceiver device for receiving an interrogation signal at a first carrier frequency and for transmitting a response signal at a second carrier frequency is disclosed. The interrogation signal comprises the first carrier frequency modulated at the second carrier frequency. The communication device includes a sensor coupled to a demodulator. The sensor receives a low frequency input used to further modulate the interrogation signal. The demodulator demodulates the low frequency input from the first carrier frequency to thereby generate the response signal comprising the second carrier frequency and the low frequency input. The demodulator preferably includes a pyroelectric demodulator, a piezoelectric demodulator, or a detector diode. The demodulator preferably has a frequency response less than the first carrier frequency but greater than the second carrier frequency.

Brocato, Robert W.↗
DOE OSTI2022

A 40 Gbps Optical Transceiver for Particle Physics Experiments

We present the design and the test results of a quad-channel optical transceiver module (QTRx) possibly for future particle physics experiments. The transmitters of QTRx, each at 10 Gbps, are based on a Quad-channel VCSEL Diode array Driver (QLDD) and 1 x 4 VCSEL array. The receivers of QTRx, with data rates of 2.56 Gbps or 10 Gbps per channel, are based on a Quad-channel Trans-Impedance and limiting Amplifier (QTIA) and 1 x 4 photodiode array of GaAs or InGaAs. QTRx is 20 mm x 10 mm x 5 mm and couples to an MT fiber connector. Test results indicate that QTRx achieves the design goals with a power consumption of 124 mW per transmitter channel at 10 Gbps and 120 mW at 2.56 Gbps for the receiver channel with an on-chip charge pump. The sensitivities of QTIA are -17 dBm at 2.56 Gbps and -8 dBm at 10 Gbps, respectively. Further improvements with a gold-finger interface and a more compact optical lens are being designed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

100 Gbps Radiation Tolerant Optical Transceiver (Final Technical Report)

The overall technical objective in phase I for the Surface Emitting Laser-Electro-Absorption Modulator (EAM) was to demonstrate feasibility of this approach by designing and building the laser-EAM chips, optimizing the fabrication process for the Laser/EAM in a series of 3 fabrication runs, irradiating Laser/EAM chips from each run and DC testing of the chips post radiation. 100 Gbps/channel testing would be done at the end of the phase II program before and after radiation. The overall technical objective for the driver circuit was to demonstrate the radiation tolerance of a circuit using the same technology as the driver, and to design the appropriate driver circuit.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

A High Gain Lens-Coupled On-Chip Antenna Module for Miniature-Sized Millimeter-Wave Wireless Transceivers

This paper presents high gain and compact Transmit/Receive (TX/RX) integrated antennas in a standard BiCMOS 130nm technology for millimeter-scale millimeter-wave (mm-wave) applications, including high data rate radios and high resolution radars. The proposed TX/RX antenna module utilizes an integrated dipole antenna for the receiver and a slot antenna for the transmitter, placed orthogonally. The achieved gain and radiation efficiency are 5.7dBi and 41.3% for the slot antenna, respectively, and 6dBi and 39% for the dipole antenna. The link budget is improved by 16dB by optimization on the geometry aswell as application of a high resistivity hemispheric silicon dielectric lens.

Engineering↗
DOE OSTI2022

System and method for ultra-high-resolution ranging using RFID

A radio-frequency method for range finding includes modulating a reference signal having an intermediate frequency to a downlink signal having a carrier frequency using a clock signal. The downlink signal is transmitted to a tag using a transceiver. An uplink signal backscattered from the tag is received and demodulated using the clock signal. The uplink signal has a frequency that is a harmonic of the carrier frequency. A distance between the tag and the transceiver is calculated based on a phase of the demodulated uplink signal. A system for range finding includes a transceiver and a processor. The transceiver modulates a reference signal to a downlink signal and transmits the downlink signal. The transceiver receives and demodulates an uplink signal. The processor is configured to receive the demodulated uplink signal and calculate a distance between the tag and the transceiver using a phase of the demodulated uplink signal.

Hui, Xiaonan↗
DOE OSTI2023

UAV ground penetrating radar array

A GPR system the implements a modified multistatic mode of operation is provided. The GPR is suitable for mounting on an unmanned aerial vehicle. The GPR system has radar transceivers. The GPR system transmits transmit signal serially via the transceivers. For each transceiver that transmits a transmit signal, the GPR system receives a return signal acquired by each transceiver except for a return signal for the transceiver that transmits the transmit signal. The GPR system outputs of matrix of return signals that includes a null value for the return signals of the transceivers that transmit.

Beer, N. Reginald↗
DOE OSTI2024

System and method for ultra-high-resolution ranging using RFID

A radio-frequency method for range finding includes modulating a reference signal having an intermediate frequency to a downlink signal having a carrier frequency using a clock signal. The downlink signal is transmitted to a tag using a transceiver. An uplink signal backscattered front the tag is received and demodulated using the clock signal. The uplink signal has a frequency that is a harmonic of the carrier frequency. A distance between the tag and the transceiver is calculated based on a phase of the demodulated uplink signal. A system for range finding includes a transceiver and a processor. The transceiver modulates a reference signal to downlink signal and transmits the downlink signal. The transceiver receives and demodulates an uplink signal. The processor is configured to receive the demodulated uplink signal and calculate a distance between the tag and the transceiver using a phase of the demodulated uplink signal.

Hui, Xiaonan↗