Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “total correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A new method for detecting abrupt changes in the dependence among multivariate hydrological series based on moving cut total correlation

Knowledge of how to define and estimate the dependence among multivariate hydrological series is essential for detecting abrupt changes in the dependence. Here, in this paper, a new method (BMCTC) is proposed to detect all possible abrupt change points in the dependence among multivariate hydrological series. The total correlation estimated by the matrix-based Renyi's alpha-order entropy functional is firstly introduced to define and measure the dependence strength among multivariate hydrological series. Then, the moving cut total correlation (MCTC) sequence is built by the moving window technique, which is used to measure changes in the dependence strength among multivariate hydrological series. Finally, the Bernaola-Galvan algorithm is used to detect all change points of the MCTC sequence. Simulations are performed to compare the effectiveness of BMCTC with Pearson correlation (BMCPC) and Spearman correlation (BMCSC), Cramer-von Mises (CvM) and copula-based likelihood-ratio (CLR). The results show that all change points are detected by BMCTC regardless of the samples size, but wrong change points or no change points are detected by other methods in most cases. BMCTC is applied to detect change points in the dependence among annual runoff, precipitation and sediment discharge series in the Xiliugou and the Kuyehe River, China. It is found that the dependence among runoff, precipitation and sediment discharge changed abruptly in 1980 and 1996 in the Kuyehe River and in 1999 in the Xiliugou River. These changes are mainly caused by human activities such as construction of water conservancy projects and coal mining.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Accurate Atomic Correlation and Total Energies for Correlation Consistent Effective Core Potentials

Very recently, we introduced a set of correlation consistent effective core potentials (ccECPs) constructed within full many-body approaches. By employing significantly more accurate correlated approaches, we were able to reach a new level of accuracy for the resulting effective core Hamiltonians. We also strived for simplicity of use and easy transferability into a variety of electronic structure methods in quantum chemistry and condensed matter physics. Here, as a reference for future use, we present exact or nearly exact total energy calculations for these ccECPs. The calculations cover H–Kr elements and are based on the state-of-the-art configuration interaction (CI), coupled-cluster (CC), and quantum Monte Carlo (QMC) calculations with systematically eliminated/improved errors. In particular, we carry out full CI/CCSD(T)/CCSDT(Q) calculations with cc-pVnZ with up to n = 6 basis sets and we estimate the complete basis set limits. Using combinations of these approaches, we achieved an accuracy of ≈1–10 mHa for K–Zn atoms and ≈0.1–0.3 mHa for all other elements—within about 1% or better of the ccECP total correlation energies. We also estimate the corresponding kinetic energies within the feasible limit of full CI calculations. In order to provide data for QMC calculations, we include fixed-node diffusion Monte Carlo energies for each element that give quantitative insights into the fixed-node biases for single-reference trial wave functions. The results offer a clear benchmark for future high-accuracy calculations in a broad variety of correlated wave function methods such as CI and CC as well is in stochastic approaches such as real space sampling QMC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

An analysis of tropopause pressure and total ozone correlations

A study of the relationship between total ozone and tropopause pressure was carried out using Total Ozone Mapping Spectrometer (TOMS) data and National Meteorological Center (NMC) global analyses. The medium scales generally show correlations greater than 0.6 throughout the middle latitudes of both hemispheres with some regions exceeding 0.8. The areas of highest correlations seem to be associated with the storm track regions of both the Northern and Southern Hemispheres. A detailed spectral analysis is performed for the medium scales on five pairs of time series of area averaged tropopause pressure and total ozone. In middle latitudes, total ozone and tropopause pressure exhibit generally similar distributions in the power spectrum. In the subtropics and tropics the power in ozone drops off more rapidly with increasing frequency than the power in tropopause pressure. Only in the Northern Hemisphere middle latitudes does one find a clear association between increased power in ozone and tropopause pressure and maxima in the coherency spectrum. Results for large scales are more complicated, showing generally positive correlations at middle latitudes.

Schubert, Siegfried D.↗
NASA NTRS1972

Correlation of total sound power and peak sideline OASPL from jet exhausts

An empirical analysis of jet noise is made for convergent exhaust nozzles. An engineering approach to the correlation of total sound power and miximum sideline overall sound pressure level (OASPL), at 200 ft, is presented for both subsonic and supersonic jets based on available data. Data correlation for subsonic jets shows no dependency of total sound power and maximum sideline OASPL on jet density. The analysis for supersonic jets results in a correlation parameter for jet total sound power consisting of the conventional Lighthill parameter modified by considerations of jet Mach number and jet acoustic velocity. Similar parameters also correlate the maximum sideline OASPL for supersonic jets.

Vonglahn, U. H.↗
NASA NTRS1972

Correlation of total sound power and peak sideline OASPL from jet exhausts.

An empirical analysis of jet noise is made for convergent exhaust nozzles. This study, conducted at the Lewis Research Center, presents an engineering approach to the correlation of total sound power and maximum sideline OASPL (at 200 ft) for both subsonic and supersonic jets based on available data. Data correlation for subsonic jets shows no dependency of total sound power and maximum sideline OASPL on jet density. The analysis for supersonic jets results in a correlation parameter for jet total sound power consisting of the conventional Lighthill parameter modified by considerations of jet Mach number and jet acoustic velocity. Similar parameters also correlate the maximum sideline OASPL for supersonic jets.

Von Glahn, U. H.↗
NASA NTRS1977

Correlation of total, diffuse, and direct solar radiation

Present requirements for realistic solar energy system evaluations necessitate a comprehensive body of solar-radition data. The data should include both diffuse and direct solar radiation as well as their total on an hourly (or shorter) basis. In general, however, only the total solar radiation values were recorded. This report presents a correlation that relates the diffuse component of an hourly total solar radiation value to the total radiation ratio of the maximum value attainable. The data used were taken at the Blue Hill Observatory in Milton, Massachusetts, for the period 1952. The relation - in the form of the data plots - can be used in situations in which only the hourly total radiation data are available but the diffuse component is desired.

Buyco, E. H.↗
NASA NTRS1987

Correlations of TOMS total ozone data (Nimbus-7 satellite) with tropopause height

Two correlation studies of Total Ozone Mapping Spectrometer (TOMS) data with tropopause height from radiosondes performed over Europe showed a correlation coefficient of 0.94 and 0.96. As a result, the rms error in the prediction of tropopause height from total ozone was found to be 20 mb. Correlation between tropopause height and TOMS data was the highest of all the other correlations with variables directly derived from radiosondes or simulated thermal radiances over the location of radiosondes. Comparing the two dimensional fields of TOMS, tropopause height from radiosondes and tropopause height field from TIROS-N retrievals, we can say that the first field is much closer to the true field from radiosondes than the third. The correlation coefficient for a ten-day study between TOMS data and tropopause height from radiosondes is between 0.85 and 0.9 for 30-70N. Tropopause analysis provided by GLA model also shows a very high correlation with TOMS data.

Munteanu, Marie-Jeanne↗
NASA NTRS2022

Simultaneous Retrievals of Biomass Burning Aerosols and Trace Gases From the Ultraviolet to Near-Infrared Over Northern Thailand During the 2019 Pre-Monsoon Season

With the advent of spaceborne spectroradiometers in a geostationary constellation, measuring high spectral resolution ultraviolet–visible (UV-VIS) and selected near-/shortwave-infrared (NIR/SWIR) radiances can enable the probing of the life cycle of key atmospheric trace gases and aerosols at higher temporal resolutions over the globe. The UV-VIS measurements are important for retrieving several key trace gases (e.g., O 3 , SO 2 , NO 2 , and HCHO) and particularly for deriving aerosol characteristics (e.g., aerosol absorption and vertical profile). This study examines the merit of simultaneous retrievals of trace gases and aerosols using a ground-based spectroradiometer covering the UV-NIR to monitor their physicochemical processes and to obtain reliable aerosol information for various applications. During the 2019 pre-monsoon season over northern Thailand, we deployed a ground-based SMART–s (Spectral Measurements for Atmospheric Radiative Transfer–spectroradiometer) instrument, which is an extended-range Pandora with reliable radiometric calibration in the 330–820 nm range, to retrieve remotely sensed chemical and aerosol properties for the first time near biomass burning sources. The high spectral resolution (∼ 1.0 nm full width half maximum with ∼ 3.7 × oversampling) of sun and sky measurements from SMART–s provides several key trace gases (e.g., O 3 , NO 2 , and H 2 O) and aerosol properties covering the UV where significant light absorption occurs by the carbonaceous particles. During the measurement period, highly correlated total column amounts of NO 2 and aerosol optical thickness (т aer ) retrieved from SMART–s (correlation coefficient, R=0.74) indicated their common emissions from biomass burning events. The SMART–s retrievals of the spectral single scattering albedo (ω 0 ) of smoke aerosols showed an abrupt decrease in the UV, which is an important parameter dictating photochemical processes in the atmosphere. The values of ω 0 and column precipitable water vapor (H 2 O) gradually increase with the mixing of biomass burning smoke particles and higher water vapor concentrations when approaching the monsoon season. The retrieved ω 0 and weighted mean radius of fine-mode aerosols from SMART–s showed positive correlations with the H 2 O (R=0.81 for ω 0 at 330 nm and 0.56 for the volume-weighted mean radius), whereas the real part of the refractive index of fine-mode aerosol (n f ) showed negative correlations (R = -0.61 at 330 nm), which suggest that aerosol aging processes including hygroscopic growth (e.g., humidification and cloud processing) can be a major factor affecting the temporal trends of aerosol optical properties. Retrieved n f and ω 0 were closer to those of the water droplet (i.e., n f of about 1.33 and ω 0 of about 1.0) under lower amounts of NO 2 during the measurement period; considering that the NO 2 amounts in the smoke may indicate the aging of the plume after emission due to its short lifetime, the tendency is also consistent with active hygroscopic processes of the aerosols over this area. Retrieved UV aerosol properties from SMART–s generally support the assumed smoke aerosol models (i.e., the spectral shape of aerosol absorption) used in NASA's current satellite algorithms, and their spectral ω 0 retrievals from ground and satellites showed good agreements (R = 0.73–0.79). However, temporal and spectral variabilities in the aerosol absorption properties in the UV emphasize the importance of a realistic optical model of aerosols for further improvements in satellite retrievals.

biomass burning↗
NASA NTRS1989

Three-dimensional boundary layer flow with streamwise adverse pressure gradient

The present study examines the effects of a strong adverse pressure gradient on a 3D turbulent boundary layer in an axisymmetric spinning cylinder geometry. Velocity measurements made with a three-component laser Doppler velocimeter include all three mean flow components, all six Reynolds stress components, and all ten triple-product correlations. Total Reynolds shear stress diminishes as the flow becomes 3D. Lower levels of shear stress were found to persist under adverse pressure gradient conditions. This low stress level was observed to roughly correlate with the magnitude of the crossflow. Variations in the pressure gradient do not alter this correlation. It is inferred that a 3D boundary layer is more prone to separate than a 2D boundary layer.

Driver, David M.↗
NASA NTRS1998

TACT: A Set of MSC/PATRAN- and MSC/NASTRAN- based Modal Correlation Tools

This paper describes the functionality and demonstrates the utility of the Test Analysis Correlation Tools (TACT), a suite of MSC/PATRAN Command Language (PCL) tools which automate the process of correlating finite element models to modal survey test data. The initial release of TACT provides a basic yet complete set of tools for performing correlation totally inside the PATRAN/NASTRAN environment. Features include a step-by-step menu structure, pre-test accelerometer set evaluation and selection, analysis and test result export/import in Universal File Format, calculation of frequency percent difference and cross-orthogonality correlation results using NASTRAN, creation and manipulation of mode pairs, and five different ways of viewing synchronized animations of analysis and test modal results. For the PATRAN-based analyst, TACT eliminates the repetitive, time-consuming and error-prone steps associated with transferring finite element data to a third-party modal correlation package, which allows the analyst to spend more time on the more challenging task of model updating. The usefulness of this software is presented using a case history, the correlation for a NASA Langley Research Center (LaRC) low aspect ratio research wind tunnel model. To demonstrate the improvements that TACT offers the MSC/PATRAN- and MSC/DIASTRAN- based structural analysis community, a comparison of the modal correlation process using TACT within PATRAN versus external third-party modal correlation packages is presented.

Marlowe, Jill M.↗
DOE OSTI2020

The nature of the chemical bond and the role of non-dynamical and dynamical correlation in Be2

In the spin-coupled generalized valence bond (SCGVB) description of Be2, there is a pair of electrons in highly overlapping “inner” orbitals corresponding to a traditional σ bond, but this bond is compromised by Pauli repulsion arising from its overlap with a second “outer” pair. The presence of this outer pair of electrons leads to a repulsive potential energy curve at long range and a bound, but metastable molecule at short range. To obtain further insights into the nature of the bond in Be2, we determined the non-dynamical and dynamical correlation contributions to the potential energy curve of Be2 using four different choices for the zero-order wave function: Restricted Hartree–Fock (RHF), SCGVB, valence-CASSCF(4,4), and valence-CASSCF(4,8). The SCGVB and valence-CASSCF(4,4) wave functions yield similar breakdowns of the total correlation energy, with non-dynamical correlation being the more important contribution. For the RHF and valence-CASSCF(4,8) wave functions, dynamical correlation is critical, without which the potential energy curve is purely repulsive. High accuracy calculations on the HBen−1Be–BeBen−1H molecule as a function of n (n = 1–6) suggest that the intrinsic strength of a Be–Be σ bond uncompromised by Pauli repulsion is on the order of 62–63 kcal/mol, and its length is 2.13–2.14 Å, ∼60 kcal/mol stronger and ∼0.35 Å shorter than in Be2.

Xu, Lu. T. (ORCID:0000000182064902)↗
DOE OSTI2019

Exploring the Random Phase Approximation for Materials and Chemical Physics

In this work we test the performance of the fully nonlocal random phase approximation (RPA) for challenging problems in materials chemistry and physics. In this work we assessed the fully nonlocal random phase approximation (RPA) for the delicate energy differences of interest in materials chemistry and physics. The applications in this proposal are challenges for the simpler approximations of Kohn-Sham density functional theory, which are part of the current “standard model” for quantum chemistry and condensed matter physics. Direct RPA includes the full exact exchange energy and a nonlocal correlation energy from the occupied and unoccupied Kohn-Sham orbitals and orbital energies, with an approximate but universal description of long-range van der Waals attraction. RPA still cannot be a benchmark electronic structure method without a correction for its short-range correlation energy which is too deep. The short-range error of RPA can be corrected by a spatially nonlocal, exchange-only kernel. Such kernels could be a more reliable and “intrinsic” approximation to capture accurate ground-state energy differences than the expensive SOSEX and other beyond-RPA corrections. In this project we revealed the strengths and limitations of some model kernels through some materials problems focusing on structural phase transitions and transition metal chemistry. In addition we demonstrated the accuracy of the Renormalized RPA for total correlation energies of simple solids, and the pressure-induced phase transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A comparative study of the effectiveness of empirical potentials for molecular dynamics simulations of borosilicate glasses

Despite their practical importance, atomistic modeling of B 2 O 3 containing glasses have been challenging due to the lack of reliable empirical potentials. Fortunately, a few recent developments have shown promises to simulate these glasses where the boron coordination has complex and non-linear dependence on glass composition. This work aims to provide an evaluation of the effectiveness of three recently developed potentials by a systematic study of a series (~20) of sodium borosilicate glasses with constant K (ratio of [SiO 2 ]/[B 2 O 3 ]) =2 and varying R (ratio of [Na 2 O]/[B 2 O 3 ] ranging from 0.1 to 4) values and several sodium boroaluminosilicate glasses. A comparative assessment was established on the basis of the short- and medium-range structure features, such as boron N 4 values, total correlation functions, bond angle distribution, oxygen speciation, and mechanical properties using experimental or well-established models as criteria. Furthermore, this work provides insights on the choices of empirical potentials for MD simulations of borosilicate glasses and gives directions of future potential development and refining.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

The Impact of Coordination Environment on the Thermodynamic Stability of Uranium Oxides

Amorphous uranium oxides are acknowledged to arise via industrial processes relevant to the nuclear fuel cycle yet evade rigorous structural characterization. An encouraging approach is to develop statistical relationships between uranium–oxygen coordination environments and thermodynamic stability from which general statements about the likelihood of observing particular U–O arrangements can be made. The number of known crystalline uranium oxides is insufficient to build statistical relationships. We have developed a database of theoretical compounds using genetic algorithms with the density functional theory as a foundation to analyze coordination geometries in the uranium–oxygen phase space. We draw fundamental insights into the nature of uranium–oxygen interactions by correlating total energy with the coordination environment. The most stable configuration of U cations with O anions is in an environment with coordination numbers 5–8 in a cubic configuration. Higher and lower coordination numbers are observed only in metastable phases. General trends are observable in the relationships between the coordination number, density, and uranium fraction in each structure. The new insight into uranium coordination enabled by these analyses is foundational for further studies into the characteristic properties of individual uranium oxide materials and for elucidation of potential oxidation pathways for uranium metal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Molecular-orbital-based machine learning for open-shell and multi-reference systems with kernel addition Gaussian process regression

We introduce a novel machine learning strategy, kernel addition Gaussian process regression (KA-GPR), in molecular-orbital-based machine learning (MOB-ML) to learn the total correlation energies of general electronic structure theories for closed- and open-shell systems by introducing a machine learning strategy. The learning efficiency of MOB-ML(KA-GPR) is the same as the original MOB-ML method for the smallest criegee molecule, which is a closed-shell molecule with multi-reference characters. In addition, the prediction accuracies of different small free radicals could reach the chemical accuracy of 1 kcal/mol by training on one example structure. Accurate potential energy surfaces for the H10 chain (closed-shell) and water OH bond dissociation (open-shell) could also be generated by MOB-ML(KA-GPR). To explore the breadth of chemical systems that KA-GPR can describe, we further apply MOB-ML to accurately predict the large benchmark datasets for closed- (QM9, QM7b-T, and GDB-13-T) and open-shell (QMSpin) molecules.

Chemistry↗
DOE OSTI2025

A Variational Autoencoder Model Toward Molecular Structure Representation Learning of Fuels

Here, in this work, a Variational Autoencoder (VAE)-based data-driven modeling framework is developed with the overarching goal of enabling fuel design. The VAE model is trained on a large dataset with several chemical species to learn a compressed latent space molecular representation. Chemical structure in the form of Simplified Molecular Input Line Entry System (SMILES) string is fed as input, encoded into the VAE latent space, and decoded back to the SMILES string using Long Short-Term Memory (LSTM) networks. Complexities of the VAE training loss function are thoroughly examined by varying the weightage (beta (𝜷) parameter) of the latent space regularization term, thereby assessing the balance between reconstruction accuracy and validity, and focusing on both accurate molecular structure reconstruction and latent space consistency. Two different strategies for 𝜷 variation are evaluated: linear annealing and cyclic annealing. In addition, the impact of total correlation adjustment and hierarchical priors is also studied with regard to the balance between reconstruction fidelity and latent space regularization, and potential issues such as posterior collapse, over-regularization, and poor disentanglement of latent variables. Overall, the best performance of the model is achieved with hierarchical priors and incrementally increasing 𝜷 from 0 to a threshold value of 0.25 over 75 epochs. The generative VAE model can be readily coupled with Quantitative Structure–Property Relationship (QSPR) analysis to develop an integrated end-to-end framework for fuel-property prediction and molecular design of novel promising fuels.

fuel design↗
NASA NTRS1973

Total carbon contents of Apollo 15 and 16 lunar samples

The total carbon contents in Apollo 15 fines range from 29 to 170 micrograms/g. Fines from Apollo 16 range from 65 to 280 micrograms/g. These samples are similar to those from Apollo 11, 12, and 14, with dark colored fines generally containing more carbon than lighter fines. Sample 61221 (light colored fines) is anomalously high with 100 micrograms/g total carbon. Correlations between total carbon content and sample collection station for each mission are evident. Basalts from Apollo 15 have less than 27 micrograms/g total carbon. Anorthositic rocks from Apollo 15 and 16 have less than 20 micrograms/g total carbon. Breccias show complex and variable carbon distributions.

Moore, C. B.↗