Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “topography”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Exploring topography-based methods for downscaling subgrid precipitation for use in Earth System Models

Topography exerts major control on land surface processes. To improve representation of topographic impacts on land surface processes, a new topography-based subgrid structure has been introduced to the Energy Exascale Earth System Model to represent the subgrid heterogeneity of surface elevation. To take advantage of the new subgrid structure for improving land surface modeling, this study explores four variations of topography-based methods for downscaling grid precipitation to the corresponding subgrids. In the first three methods, the deviation of the subgrid precipitation from the grid’s is equal to the grid precipitation multiplied by the ratio of the elevation difference between the subgrid and grid mean to a specified elevation equals to the grid elevation, the difference between the maximum and minimum subgrid elevation, and the maximum subgrid elevation, respectively. The second method limits the ratio to 0.5 to avoid extreme values on mountains and the third method accounts for the slope effect. The fourth method is similar to the third method except that the Froude Number is used to limit the numerator in a blocking regime of the ambient flow. The downscaled precipitation is evaluated using the PRISM precipitation data over the U.S. using statistical metrics. Results show that by accounting for topographic slope besides elevation, the third and fourth methods show clear advantages over the first and second methods. Furthermore, introducing the Froude Number in the fourth method improves downscaling skill and shows consistent advantages over the third method in areas with larger subgrid heterogeneity across different grids sizes.

Tesfa, Teklu K.↗
DOE OSTI2025

The Surface-Topography Challenge: A Multi-Laboratory Benchmark Study to Advance the Characterization of Topography

Surface performance is critically influenced by topography in virtually all real-world applications. The current standard practice is to describe topography using one of a few industry-standard parameters. The most commonly reported number is Ra, the average absolute deviation of the height from the mean line (at some, not necessarily known or specified, lateral length scale). However, other parameters, particularly those that are scale-dependent, influence surface and interfacial properties; for example the local surface slope is critical for visual appearance, friction, and wear. The present Surface-Topography Challenge was launched to raise awareness for the need of a multi-scale description, but also to assess the reliability of different metrology techniques. In the resulting international collaborative effort, 153 scientists and engineers from 64 research groups and companies across 20 countries characterized statistically equivalent samples from two different surfaces: a “rough” and a “smooth” surface. The results of the 2088 measurements constitute the most comprehensive surface description ever compiled. We find wide disagreement across measurements and techniques when the lateral scale of the measurement is ignored. Consensus is established through scale-dependent parameters while removing data that violates an established resolution criterion and deviates from the majority measurements at each length scale. Our findings suggest best practices for characterizing and specifying topography. The public release of the accumulated data and presented analyses enables global reuse for further scientific investigation and benchmarking.

42 ENGINEERING↗
DOE OSTI2020

3D-Printed Repeating Re-Entrant Topography to Achieve On-Demand Wettability and Separation

While it is difficult and expensive to fabricate a complicated surface structure via conventional techniques, three-dimensional (3D) printing serves as a time-efficient and cost-efficient alternative. In the current study, a novel repeating re-entrant topography is fabricated by two-photon polymerization 3D printing. The experimental results show that the repeating re-entrant surface enhances the desired on-demand surface wettability. Furthermore, the 3D-printed membranes with the repeating re-entrant structures enable the efficient on-demand separation of liquid mixtures with high flux, which is critical for the wastewater treatment in the chemical industry.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Topography-Induced TKE Budget Behavior Over an Amazon Forest

Data from three different heights (35, 50 and 81 m) of one of the ATTO Project towers in the Amazon forest were used to calculate the TKE (turbulence kinetic energy) budget and some other statistics within the RSL (roughness sublayer). The statistical analyses were carried out for unstable and stable cases. The vertical transport and the vertical advection terms do not explain the imbalances found in the TKE budget, highlighting the impor- tance of horizontal terms in complex terrain. Indeed, patterns independent of the time of day were found for vertical transport, horizontal and vertical velocity skewness, the mean vertical component velocity, and momentum and vertical TKE flux. Here, the highest values of mean vertical velocity were observed from the direction where there is a valley near the tower, which may indicate a topographical effect. Monin-Obukhov Similarity Theory (MOST) predictions for the mean velocity gradient, strictly applicable only in the inertial sublayer (ISL), gave reasonable predictions at 35 and 50 m, but dimensionless dissipation rates displayed large scatter. At 81 m, there were clear deviations from MOST for the two functions, disclosing the effect of topography. In addition, a neutral LES (large-eddy simu- lation) study showed good agreement with tower data for the same general wind direction.

ATTO project↗
NASA NTRS2004

Topography of the Flattest Surface on Earth: using ICESAT, GPS, and MISR to Measure Salt Surface Topography on Salar de Uyuni, Bolivia

Salt flats are aptly named: they are composed largely of salt, and are maintained as nearly equipotential surfaces via frequent flooding. The salar de Uyuni, on the Altiplano in southwestern Bolivia, is the largest salt flat on Earth, with an area of 9,800 sq km. Except for a few bedrock islands, it has less than 40 cm of relief. The upper-most salt unit averages 5 m thick and contains 50 cu km of nearly pure halite. It includes most of the salt that was in solution in paleolake Minchin, which attained a maximum area of 60,000 sq km and a maximum depth of 150 m, roughly 15 kyr ago. Despite approx. 10 m of differential isostatic rebound since deposition, the salar surface has been actively maintained as an extraordinarily flat and smooth surface by annual flooding during the rainy season. We have used the strong optical absorption properties of water in the visible band to map spatial variations in water depth during a time when the salar was flooded. As water depth increases, the initially pure white surface appears both darker and bluer. We utilized MISR images taken during the interval from April to November 2001. The red and infra-red bands (672 and 867 nm wavelength) were most useful since the water depth is small and the absorption at those wavelengths is quite strong. Nadir pointed MISR images have 275 m spatial resolution. To aid in our evaluation of water depth variations over the saiar surface, we utilized two sources of direct topographic measurements: several ICESAT altimetry tracks cross the area, and a 40x50 km GPS grid was surveyed to calibrate ICESAT. A difficulty in using these data types is that both give salt surface elevations relative to the ellipsoid, whereas the water surface will, in the absence of wind or tidal disturbances, follow an equipotential surface. Geoid height is not known to the required accuracy of a few cm in the central Andes. As a result, before comparing optical absorption from MISR to salt surface topography from GPS or ICESAT, we removed the longest wavelengths from both.

Comstock, Robert L.↗
NASA NTRS1993

Can weak crust explain the correlation of geoid and topography on Venus?

The effect on geoid and topography of low viscosity crust overlying a steady-state convecting mantle is estimated under the assumption that the shear between crust and mantle does not alter the mantle flow. The weak crustal layer can change the sign of the geoid to topography ratio (admittance). The positive long wavelength admittance for Venus is consistent with a weak crust overlying a mantle with a viscosity that increases strongly with depth. The accepted interpretation of the strong positive correlation of geoid and topography on Venus, is that the convecting mantle of Venus has a constant viscosity with depth. Topography results from vertical normal stresses caused by mantle convection and highlands occur where mantle upwells. For topography to be supported by normal stress, the time scale for crustal flow must be long compared to the time scale for changes in the pattern of mantle flow. Because the high surface temperature of Venus may cause the crust to have a low viscosity, this assumption may be false. Topography should then be dominated by shear coupling between the crust and mantle. In the absence of a crustal layer, convection in a constant viscosity layer gives rise to a geoid anomaly that correlates positively with surface topography. When the viscosity in the layer increases with depth by several orders of magnitude, the surface topography and geoid anomaly become anti-correlated.

Buck, W. Roger↗
DOE OSTI2023

Turbulent Kinetic Energy Budgets over Gentle Topography Covered by Forests

Large-eddy simulations of flow over a “horizontally” uniform model forest are used to investigate the effects of gentle topography on the turbulent kinetic energy (TKE) budget within the canopy roughness sublayer. Despite significant differences between simulations using idealized sinusoidal topography and real topography of the Amazon forest, results indicate that the effects of topography are located predominantly in the upper canopy and above, and are mostly caused by mean advection of TKE. The “horizontally” averaged TKE budget from idealized and real gentle topographies are almost identical to that for flat terrain, including a clear inertial layer above the roughness sublayer in which shear production is balanced by local dissipation. At topography crests, where observational towers are usually located, mean vertical advection of TKE can be as important as horizontal advection. Here, we propose the use on an approximate TKE balance equation to estimate mean advection from single tower measurements, and introduce a new advection index that can be used as a proxy to quantify the importance of the topography on the TKE budget.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1987

A fractal interpretation of topography and geoid spectra on the earth, moon, Venus, and Mars

Global spectra are available for topography and geoid on the earth, Venus, Mars, and the moon. If the spectral energy density has a power law dependence on wave number, a fractal is defined. The topography spectrum for the earth is a well-defined fractal with D = 1.5; this corresponds to Brown noise with the amplitude proportional to the wavelength. Although there is more scatter for the other planetary bodies, the data for Mars and the moon correlate well with the data for the earth. Venus topography also exhibits a Brown noise behavior but with a smaller amplitude. The power law dependence of the earth's geoid is known as Kaula's law. It is shown that uncompensated Brown topography gives a geoid with a power law dependence that is in quite good agreement with Kaula's law. However, the required amplitude is only 8 percent of the observed topography. A similar result is found for the other bodies, with the ratio of the amplitude of topography required to explain the geoid to the observed topography increasing to 72 percent for the moon.

Turcotte, Donald L.↗
NASA NTRS1998

The Laser Vegetation Imaging Sensor (LVIS): An Airborne Laser Altimeter for Mapping Vegetation and Topography

The Laser Vegetation Imaging Sensor (LVIS) is an airborne laser altimeter designed to quickly and extensively map surface topography as well as the relative heights of other reflecting surfaces within the laser footprint. Since 1997, this instrument has primarily been used as the airborne simulator for the Vegetation Canopy Lidar (VCL) mission, a spaceborne mission designed to measure tree height, vertical structure and ground topography (including sub-canopy topography). LVIS is capable of operating from 500 m to 10 km above ground level with footprint sizes from 1 to 60 m. Laser footprints can be randomly spaced within the 7 degree telescope field-of-view, constrained only by the operating frequency of the ND:YAG Q-switched laser (500 Hz). A significant innovation of the LVIS altimeter is that all ranging, waveform recording, and range gating are performed using a single digitizer, clock base, and detector. A portion of the outgoing laser pulse is fiber-optically fed into the detector used to collect the return signal and this entire time history of the outgoing and return pulses is digitized at 500 Msamp/sec. The ground return is then located using software digital signal processing, even in the presence of visibly opaque clouds. The surface height distribution of all reflecting surfaces within the laser footprint can be determined, for example, tree height and ground elevation. To date, the LVIS system has been used to monitor topographic change at Long Valley caldera, CA, as part of NASA's Topography and Surface Change program, and to map tree structure and sub-canopy topography at the La Selva Biological Research Station in Costa Rica, as part of the pre-launch calibration activities for the VCL mission. We present results that show the laser altimeter consistently and accurately maps surface topography, including sub-canopy topography, and vegetation height and structure. These results confirm the measurement concept of VCL and highlight the benefits of airborne prototypes of spaceborne instruments.

Bryan, J.↗