Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “topographic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Fine resolution topographic mapping of the Jovian moons: a Ka-band high resolution topographic mapping interferometric synthetic aperture radar

The topographic data set obtained by MOLA has provided an unprecedented level of information about Mars' geologic features. The proposed flight of JIMO provides an opportunity to accomplish a similar mapping of and comparable scientific discovery for the Jovian moons through us of an interferometric imaging radar analogous to the Shuttle radar that recently generated a new topographic map of Earth. A Ka-band single pass across-track synthetic aperture radar (SAR) interferometer can provide very high resolution surface elevation maps. The concept would use two antennas mounted at the ends of a deployable boom (similar to the Shuttle Radar Topographic Mapper) extended orthogonal to the direction of flight. Assuming an orbit altitude of approximately 100 km and a ground velocity of approximately 1.5 km/sec, horizontal resolutions at the 10 meter level and vertical resolutions at the sub-meter level are possible.

Jupiter Icy Moon Orbiter↗
NASA NTRS2003

Fine Resolution Topographic Mapping of the Jovian Moons: A Ka-Band High Resolution Topographic Mapping Interferometric Synthetic Aperture Radar

The topographic data set obtained by MOLA has provided an unprecedented level of information about Mars' geologic features. The proposed flight of JIMO provides an opportunity to accomplish a similar mapping of and comparable scientific discovery for the Jovian moons through use of an interferometric imaging radar analogous to the Shuttle radar that recently generated a new topographic map of Earth. A Ka-band single pass across-track synthetic aperture radar (SAR) interferometer can provide very high resolution surface elevation maps. The concept would use two antennas mounted at the ends of a deployable boom (similar to the Shuttle Radar Topographic Mapper) extended orthogonal to the direction of flight. Assuming an orbit altitude of approximately 100km and a ground velocity of approximately 1.5 km/sec, horizontal resolutions at the 10 meter level and vertical resolutions at the sub-meter level are possible.

Madsen, S. N.↗
NASA NTRS2022

Integrated Topographic Corrections Improve Forest Mapping Using Landsat Imagery

In mountainous environments, topography strongly affects the reflectance due to illumination effects and cast shadows, which introduce errors in land cover classifications. However, topographic correction is not routinely implemented in standard data pre-processing chains (e.g., Landsat Analysis Ready Data), and there is a lack of consensus whether topographic correction is necessary, and if so, how to conduct it. Furthermore, methods that correct simultaneously for atmospheric and topographic effects are becoming available, but they have not been compared directly. Our objects were to investigate (1) the effectiveness of two topographic correction approaches that integrate atmospheric and topographic correction, (2) improvements in classification accuracy when analyzing topographically corrected single-date imagery (14 July 2016 and 2 October 2016), versus a full Landsat time series from 2014 to 2016, and 3) improvements in classification accuracy when including additional terrain information (i.e., topographic slope, elevation, and aspect). We developed a physical based model and compared it with an enhanced C-correction, both of which integrate atmospheric and topographic correction. We compared classification accuracies with and without topographic correction using combinations of single-date imagery, image composites and spectral-temporal metrics generated from the full Landsat time series, and additional terrain information in the Caucasus Mountains. We found that both the enhanced C-correction and the physical model performed very well and largely eliminated the correlation (Pearson’s correlation coefficient r ranges from 0.06 to 0.24) between surface reflectance and illumination condition, but the physical model performed best (r ranges from 0.05 to 0.11). Both image composites, and spectral-temporal metrics generated from corrected imagery, resulted in significantly (p ≤ 0.05) higher classification accuracies and better forest classifications, especially for the mixed forests. Adding terrain information reduced classification error significantly, but not as much as topographic correction. In summary, topographic correction remains necessary, even when analyzing a full Landsat time series and including a digital elevation model in the classification. We recommend that topographic correction should be applied when analyzing Landsat satellite imagery in mountainous region for forest cover classification.

Atmospheric correction↗
NASA NTRS2020

Land-cover Change in the Caucasus Mountains Since 1987 Based on the Topographic Correction of Multi-temporal Landsat Composites

Mountainous regions are changing rapidly across the world due to both land-use change and climate change. Given the importance of mountainous regions for ecosystem services and endemic biodiversity, monitoring these changes is essential. Satellite data provide a great resource to map land-cover change in mountainous regions, however mapping is especially challenging there because topographic complexity affects reflectance. The so called ‘topographic effect’ has been successfully corrected for in case studies of small areas, but a comparison of large-area classifications and land-cover change analyses with and without topographic correction is missing. Here, we performed a long-term land-cover change assessment for a large mountainous region, i.e., the Caucasus Mountains with topographic correction. Our two goals were 1) to examine the effect of topographic correction on land-cover classification for a large mountainous region, and 2) to assess land-cover changes since 1987 across the Caucasus based on the full Landsat archive. Both the complex topography and the history of land-use changes, especially after the collapse of the Soviet Union in 1991, make the Caucasus Mountains an ideal study area to understand topographic effects on large-area land-cover mapping for the last three decades. First, we compared a non-topographically-corrected Landsat classification for 2015 with a classification that was topographically-corrected with an enhanced C-correction for the same year and assessed the accuracy of both. Second, we derived topographically-corrected Landsat classifications for six dates to assess changes in cropland and forest from 1987 to 2015, based on class probabilities and post-classification comparisons. In regard to our first goal, topographic correction improved the overall accuracy of the classification only by 2% (from 79 to 81%), but disagreement rates were as high as 100% in mountainous regions, especially among forest types. In regard to our second goal, we found that cropland loss was the most prevalent change process since 1987. Cropland loss was particularly widespread in Georgia and Armenia until 2000, and in Azerbaijan until 2005. The North Caucasus (the Russian Federation) had more stable cropland over time, most likely due to different land reforms after the collapse of the Soviet Union, and the prevalence of flat landscapes and very fertile soils, which make cultivation easier than in the South Caucasus. Rates of forest change throughout the Caucasus Mountains were surprisingly low, with forest loss and forest gain was most likely due to cropland abandonment and less grazing pressure. Our results highlight both the importance and the feasibility of topographic correction for accurate large-area land-cover classifications in steep terrain.

Large-area mapping↗
NASA NTRS2005

Generating Solid Models from Topographical Data

A method of generating solid models of terrain involves the conversion of topographical data into a form useable by a rapid-prototyping (RP) machine. The method was developed to enable the use of the RP machine to make solid models of Martian terrain from Mars Orbiter laser-altimeter topographical data. The method is equally applicable to the generation of models of the terrains of other astronomical bodies, including other planets, asteroids, and Earth. Topographical data describe a terrain in terms of a set of three-dimensional coordinates [e.g., Cartesian (x,y,z) or polar (latitude, longitude, radius) coordinates] of points or nodes on the terrain surface. The input data for the RP machines are required to provide a three-dimensional description, not of a single surface, but of a volume in this case, a ground volume that underlies the terrain surface. The description is required to be in the form of triangular elements that connect the nodes of all the surfaces and that completely bound the volume, with no open areas, no overlap of triangles, and no extraneous geometric elements. The software used in the present model-generation method was written in IDL - an advanced programming language that affords a number of tools, including subroutines that triangularize surfaces. The software creates a volume from the topographical surface data by adding sides to the edges of the terrain surface and joining the sides with a bottom surface. Each of the sides is triangularized by use of IDL subroutines, and then the software searches for extraneous elements and removes them. Topographical data are usually presented in a grid corresponding to polar coordinates, so that a model generated from such data is equivalent to a topographical map in Mercator projection. However an RP machine is fully capable of including the curvature of a planetary body in a model that it makes. Therefore, the software also offers a capability to transform the topographical data to a projection onto a surface having a curvature corresponding to that of the surface of the modeled planet.

Keller, John W.↗
DOE OSTI2025

Representing Fine‐Scale Topographic Effects on Surface Radiation Balance in Hyper‐Resolution Land Surface Models

Land surface models are increasingly used to simulate land surface processes at hyper-spatial resolutions (e.g., ∼1 km). As model resolution increases, grid-scale topographic effects on surface radiation fluxes and their interactions between adjacent grids become more pronounced. However, current land surface models routinely neglect the fine-scale topographic effects on surface radiation balance. This study developed physically-based and computationally-efficient parameterizations (fineTOP) that explicitly resolve fine-scale topographic effects on downward shortwave and longwave radiation as well as land surface radiative properties. The newly developed parameterizations were implemented and tested in the Energy Exascale Earth System Model (E3SM) Land Model (ELM). Multi-decadal km-resolution ELM simulations over the California Sierra Nevada show that fine-scale topography significantly impacts the surface energy balance and snow processes across seasons. Slope determines the magnitude of topographic effects, while aspect controls their sign. For slopes larger than 30°, topography-induced change in annual surface temperature can be as large as 3.3 K. Regionally, the mean value and standard deviation of topography-induced changes in annual surface temperature are −0.22 ± 0.38 K and +0.25 ± 0.37 K over north-facing and south-facing slopes, respectively. Topography-induced changes in surface radiative properties account for 3.5% ± 13.8% of total topographic effects on annual net radiation. With fineTOP, ELM captures the aspect-dependence of snow cover fraction, snow water equivalent, and land surface temperature found in MODIS satellite observations and a snow reanalysis data set, while the default ELM fails to capture this phenomenon. The enhanced capability to represent fine-scale topographic effects on surface radiation balance can be used to advance understanding of the role of fine-scale topography in land surface processes and land-atmosphere interactions over mountainous regions.

Hao, Dalei [Pacific Northwest National Laboratory ↗
NASA NTRS1980

The contribution of the diffuse light component to the topographic effect on remotely sensed data

The topographic effect is measured by the difference between the global radiance from inclined surfaces as a function of their orientation relative to the sensor position and light source. The short wave radiant energy incident on a surface is composed of direct sunlight, scattered skylight, and light reflected from surrounding terrain. The latter two components are commonly known as the diffuse component. The contribution of the diffuse light component to the topographic effect was examined and the significance of this diffuse component with respect to two direct radiance models was assessed. Diffuse and global spectral radiances were measured for a series of slopes and aspects of a uniform and surface in the red and photographic infrared parts of the spectrum, using a nadir pointing two channel handheld radiometer. The diffuse light was found to produce a topographic effect which varied from the topographic effect for direct light. The topographic effect caused by diffuse light was found to increase slightly with solar elevation and wavelength for the channels examined. The correlations between data derived from two simple direct radiance simulation models and the field data were not significantly affected when the diffuse component was removed from the radiances. Radiances from a 60 percent reflective surface, assuming no atmospheric path radiance, the diffuse light topographic effect contributed a maximum range of 3 pixel values in simulated LANDSAT data from all aspects with slopes up to 30 degrees.

Justice, C.↗
NASA NTRS1980

Application of digital terrain data to quantify and reduce the topographic effect on LANDSAT data

Integration of LANDSAT multispectral scanner (MSS) data with 30 m U.S. Geological Survey (USGS) digital terrain data was undertaken to quantify and reduce the topographic effect on imagery of a forested mountain ridge test site in central Pennsylvania. High Sun angle imagery revealed variation of as much as 21 pixel values in data for slopes of different angles and aspects with uniform surface cover. Large topographic effects were apparent in MSS 4 and 5 was due to a combination of high absorption by the forest cover and the MSS quantization. Four methods for reducing the topographic effect were compared. Band ratioing of MSS 6/5 and MSS 7/5 did not eliminate the topographic effect because of the lack of variation in MSS 4 and 5 radiances. The three radiance models examined to reduce the topographic effect required integration of the digital terrain data. Two Lambertian models increased the variation in the LANDSAT radiances. The nonLambertian model considerably reduced (86 per cent) the topographic effect in the LANDSAT data. The study demonstrates that high quality digital terrain data, as provided by the USGS digital elevation model data, can be used to enhance the utility of multispectral satellite data.

Justice, C. O.↗
NASA NTRS1980

The topographic effect on spectral response from nadir-pointing sensors

It is difficult to interpret multispectral Landsat earth resources data in areas of rugged and mountainous terrain because of the topographic effect on the sensor response. The objectives of this study were to examine and quantify the topographic effect on the sensor response from a uniform sand surface, to assess a simple theoretical incidence model for modeling the radiance from the surface, and to simulate Landsat sensor response due to the topographic effect. A field experiment was designed to collect data from a large range of slope angles and aspects at a range of solar elevations, using a hand-held radiometer. Analysis of these data showed that the magnitude of the topographic effect varied as a function of the solar elevation, the azimuthal orientation of the slope, and the slope inclination. The field measured variations in spectral response were found to have generally strong correlations with the theoretical model, and it was shown that the applicability of the Lambertian assumption varied within and between data sets. It is concluded that if slope angle, aspect, and solar zenith angle and azimuth are known, a technique incorporating a model to reduce the topographic effect prior to multispectral classification may be developed.

Holben, B. N.↗
NASA NTRS1981

An examination of spectral band ratioing to reduce the topographic effect on remotely sensed data

Spectral-band ratioing of radiance data is examined as a means of reducing the topographic effect in multispectral data. A ground-based nadir-pointing two-channel radiometer filtered for the red and photographic IR portions of the spectrum was used to measure the topographic effect associated with a uniform surface inclined from horizontal to 60 deg at 16 compass points and for several solar elevations. It is found that ratioing reduced the topographic effect in the field-measured radiance data by an average of 83%, that the remaining topographic effect could be further reduced by subtracting the scattered-light component of the global irradiance before ratioing, and that ratioing was not effective in reducing the topographic effect on shaded surfaces illuminated solely by scattered light. It is concluded that additional variations in ratios can be expected for Landsat data owing to sensor calibration and quantization.

Holben, B.↗
NASA NTRS1993

Resolving topographic detail on Venus by modeling complex Magellan altimetry echoes

Magellan's altimeter is providing some of the finest resolution topography of Venus achieved to date. Nevertheless, efforts continue to improve the topographic resolution whenever possible. One effort to this end is stereoscopic imaging, which provides topography at scales similar to that of the synthetic aperture radar (SAR). However, this technique requires two SAR images of the same site to be obtained and limits the utility of this method. In this paper, we present another method to resolve topographic features at scales smaller than that of an altimeter footprint, which is more globally applicable than the stereoscopic approach. Each pulse which is transmitted by Magellan's altimeter scatters from the planet and echoes to the receiver, delayed based on the distance between the spacecraft and each surface element. As resolved in time, each element of an altimetry echo represents the sum of all points on the surface which are equidistant from the spacecraft. Thus, individual returns, as a function of time, create an echo profile which may be used to derive properties of the surface, such as the scattering law or, in this case, the topography within the footprint. The Magellan project has derived some of this information by fitting model templates to radar echo profiles. The templates are calculated based on Hagfor's Law, which assumes a smooth, gently undulating surface. In most regions these templates provide a reasonable fit to the observed echo profile; however, in some cases the surface departs from these simple assumptions and more complex profiles are observed. Specifically, we note that sub-footprint topographic relief apparently has a strong effect on the shape of the echo profile. To demonstrate the effects of sub-resolution relief on echo profiles, we have calculated the echo shapes from a wide range of simple topographic models. At this point, our topographic models have emphasized surfaces where only two dominant elevations are contained within a footprint, such as graben, ridges, crater rims, and central features in impact craters.

Lovell, Amy J.↗
NASA NTRS1978

Mars - Topographic control of clouds, 1907-1973

Mariner 9 high-resolution photos and topographic information were used to make a topographic analysis of 'blue' and 'red' cloud positions reported over a 66-year period. A sample of 77 'blue' cloud sites lay preferentially at the highest Martian elevations; 60% centered precisely on the seven major volcanic mountain peaks (unknown when the clouds were observed); another 16% lay on substantial slopes or contacts between cratered terrain and lower plains. The median altitude of blue cloud sites was 2.1 km above the global topographic median. These results agree with other evidence that most earth-detected blue clouds are orographic uplift clouds, composed of condensates. Over half of 131 sporadic yelowish or red clouds were associated with blue clouds or volcanoes, and thus probably did not represent dust storm phenomena. Of 88 'possible dust clouds', about two-thirds occur at borders between light and dark areas, in the light regions. These sites may have thin veneers of dust, and current depositional or denudational activity. Median altitude of 'possible dust cloud' sites was 0.5 km below the global topographic median.

Hartmann, W. K.↗
NASA NTRS1979

Machine processing of Landsat MSS data and DMA topographic data for forest cover type mapping

A study with the objective of developing and testing techniques which utilize both digital topographic data and Landsat MSS spectral data to map forest cover types is examined. Emphasis is given to the topographic distribution model (TDM), which combines point-by-point information about forest species, elevation, slope, and aspect to quantitatively describe topographic positions. Results show the stratified random sample approach to be very effective for developing the TDM, while the use of topographic data significantly improved the overall classification accuracy of forest cover types as compared to using spectral data alone.

Fleming, M. D.↗
NASA NTRS1981

Space based topographic mapping experiment using Seasat synthetic aperture radar and LANDSAT 3 return beam vidicon imagery

A technique for producing topographic information is described which is based on same side/same time viewing using a dissimilar combination of radar imagery and photographic images. Common geographic areas viewed from similar space reference locations produce scene elevation displacements in opposite direction and proper use of this characteristic can yield the perspective information necessary for determination of base to height ratios. These base to height ratios can in turn be used to produce a topographic map. A test area covering the Harrisburg, Pennsylvania region was observed by synthetic aperture radar on the Seasat satellite and by return beam vidicon on by the LANDSAT - 3 satellite. The techniques developed for the scaling re-orientation and common registration of the two images are presented along with the topographic determination data. Topographic determination based exclusively on the images content is compared to the map information which is used as a performance calibration base.

Mader, G. L.↗
NASA NTRS1981

A method of defining topographic datums of planetary bodies

Since no known planetary bodies in the solar system other than the earth have large bodies of water, a topographical datum other than a sea-level reference must be used as a zero-elevation reference surface. The present paper discusses the definition of the topographic datums of Mars and the moon in terms of a gravity-level surface. Planetary gravitational field potentials were represented by a spherical harmonic expansion in terms of gravity coefficients measured by planetary orbiters, and the topographical datum was taken as the sum of an arbitrarily selected radius of the mean sphere and the radial deviation from the mean sphere. The datum defined for Mars on the basis of Mariner 9 data can be approximated as a triaxial ellipsoid with semimajor axes of 3394.6 and 3393.3 km and semiminor axis of 3376.3 km, based on a mean radius of 3382.9 km. For the moon, Lunar Orbiter IV tracking and ranging data give a datum approximated by a triaxial figure with semimajor axes 1738.30 and 1738.18 km and semiminor axis 1737.65 km, based on a mean radius of 1738 km. A topographic datum of Venus is also planned based on Pioneer-Venus gravity data.

Wu, S. S. C.↗
NASA NTRS1981

Application of digital terrain data to quantify and reduce the topographic effect on Landsat data

Landsat multispectral scanner (MSS) data are integrated with 30 m US Geological Survey digital terrain data to quantify and reduce topographic effects on imagery of a forested mountain ridge in central Pennsylvania. Spectral band ratioing slightly decreased variation of Landsat data for 50% of the transects and could not eliminate direct-light topographic effects. A Lambertian model increased topographic effect, and a modified Lambertian model decreased variation produced by the original model, but gave higher variances than found in the raw Landsat data. A non-Lambertian model, however, decreased variation by 86%, reducing topographic effects. The study demonstrated that high quality digital terrain data can be used to develop and test improved radiative transfer models, and enhance the utility of MSS data.

Justice, C. O.↗
NASA NTRS1993

Comparative hypsometric analysis of both Earth and Venus topographic distributions

Previous studies have compared the global topographic distribution of both planets by means of differential hypsometric curves. For the purpose of comparison, the terrestrial oceanic load was removed, and a reference base level was acquired. It was chosen on the basis of geometric considerations and reflected the geometric shape of the mean dynamical equilibrium figure of the planetary surface in both cases. This reference level corresponds to the well-known sea level for the Earth; for Venus, given its slow rate of rotation, a sphere of radius close to the mean, median and modal values of the planetary radii distribution were considered and the radius value of 6051 km arbitrarily taken. These studies were based on the low resolution (100 x 100 sq km) coverage of Venus obtained by the Pioneer Venus altimeter and on the 1 deg x 1 deg terrestrial topography. But, apart from revealing the distinct contrast existing between the Earth's bimodal and Venus' strong unimodal topographic distribution, the choice of such a reference level is inadequate and even misleading for the comparative geophysical understanding of the planetary relief distribution. The present work reinvestigates the comparison between Earth and Venus hypsometric distribution on the basis of the high-resolution data provided, on one hand, by the recent Magellan global topographic coverage of Venus' surface, and on the other hand, by the detailed NCAR 5 x 5 ft. grid topographic database currently available for the Earth's surface.

Rosenblatt, P.↗
NASA NTRS1995

Large Topographic Rises on Venus: Implications for Mantle Upwelling

Topographic rises on Venus have been identified that are interpreted to be the surface manifestation of mantle upwellings. These features are classified into groups based on their dominant morphology. Atla and Beta Regiones are classified as rift-dominated, Dione, western Eistla, Bell, and Imdr Regiones as volcano-dominated, and Themis, eastern Eistla, and central Eistla Regiones as corona-dominated. At several topographic rises, geologic indicators were identified that may provide evidence of uplifted topography (e.g., volcanic flow features trending upslope). We assessed the minimum contribution of volcanic construction to the topography of each rise, which in general represents less than 5% of the volume of the rise, similar to the volumes of edifices at terrestrial hotspot swells. The total melt volume at each rise is approximated to be 10(exp 4) - 10(exp 6) cu km. The variations in morphology, topography, and gravity signatures at topographic rises are not interpreted to indicate variations in stage of evolution of a mantle upwelling. Instead, the morphologic variations between the three classes of topographic rises are interpreted to indicate the varying influences of lithospheric structure, plume characteristics, and regional tectonic environment. Within each class, variations in topography, gravity, and amount of volcanism may be indicative of differing stages of evolution. The similarity between swell and volcanic volumes for terrestrial and Venusian hotspots implies comparable time-integrated plume strengths for individual upwellings on the two planets.

Stofan, Ellen R.↗