Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “toluene”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Correlation between Toluene Exposure and Toxicity Effects of Toluene on Drosophila Melanogaster Fecundity and Offspring Survivability

Toluene is a volatile organic compound that is a common indoor contaminant. According to the U.S. Department of Health and Human Services, chronic toluene exposure negatively affects organ systems, such as nervous and respiratory, and acts as a fetotoxic agent in the development of humans. Toluene exposure causes damage to human myelin sheaths, thus we propose that damage to the fly nervous system will be similar to that seen in humans exposed to toluene. Our ultimate goal is to determine the effects of toluene exposure on developmental and neuronal processes in D. melanogaster . In this first phase, we hypothesize that toluene‐exposed adults, at the interpolated Lethal Exposure (LE 50 ), will demonstrate decreased fecundity and that offspring from toluene‐exposed females will have decreased survivability from the egg to adult stage. We developed a continuous flow system that delivers known concentrations of gaseous toluene to populations of D. melanogaster . Ten to twenty adult female flies per trial were exposed for 24 hours to known concentrations of toluene. Surviving females were collected, counted and mated to non‐exposed adult males. The toluene‐exposed females were placed on a colored agar plate to lay eggs for 24 hours. Eggs were counted to determine fecundity (number of eggs produced by a single female fly). Survivability of eggs to later life stages, was measured by counting number of larvae, pupae, and adults divided by number eggs, larvae, and pupae respectively. The interpolated LE 50 of gaseous toluene was between 1000 and 1500 ppm after 24‐hour exposure. Fecundity of toluene‐exposed females decreased by approximately 50% when compared to airexposed females. The survivability of offspring of air‐exposed flies from egg to larval stages was 84% higher than published studies. We observed that larval eclosure from eggs laid by toluene‐exposed females was 35–50% higher on days 1 and 2 when compared to larval eclosure from eggs of air‐exposed exposed females. On days 3–6 the eclosure rate was relatively similar. These data showed toluene's effects on fecundity and survivability were measurable, however, additional replicates are in progress to fully assess the life table characteristics of offspring of toluene‐exposed female flies. Further studies will focus on toluene's effect on nervous and reproductive organs of fruit flies, along with a study on the mutagenic effects of toluene on fly DNA. Support or Funding Information U.S. DOE, Hispanic‐Serving Institutions, STEM Articulation Grant P031C110128 This abstract is from the Experimental Biology 2018 Meeting. There is no full text article associated with this abstract published in The FASEB Journal .

MacGregor, Michael Charles↗
DOE OSTI2025

Pentaerythritol structure-directing agents bias aluminum siting in MFI zeolites to increase para -xylene selectivity during toluene methylation

MFI zeolites contain ten-membered ring channels (∼0.55 nm diameter) that intersect to form larger voids (∼0.70 nm diameter). The distribution of framework Al sites dictates the void environments that confine active H + sites. MFI synthesized with pentaerythritol (PET) and Na + as structure-directing agents are interrogated using kinetically controlled toluene methylation rates and xylene isomer selectivities. High para-xylene selectivity and low toluene methylation rates indicate that MFI-PET samples contain H + sites predominantly in smaller channels. As-synthesized samples contain more framework Al than Na + , indicating that some charge compensation is provided by protonated PET-solvent complexes that bias Al siting towards these smaller channels.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Solid–Liquid Phase Transition in the Octadecanoic Acid Film Adsorbed on the Toluene–Water Interface

The structure of the soluble protonated (pH = 2) octadecanoic acid film adsorbed on the saturated hydrocarbon (n-hexane)–water and aromatic hydrocarbon (toluene)–water interfaces is studied by X-ray reflectometry using synchrotron radiation. The experimental data demonstrate that a solid phase of a Gibbs monolayer 26 ± 1 Å thick, in which aliphatic tails are perpendicular to the surface and the area per molecule is A = 18 ± 2 Å{sup 2}, is formed in the film at the n-hexane–water interface. The solid monolayer on the toluene–water interface in the adsorbed film melts when temperature increases, and this transition is caused by disordering of the hydrocarbon tails of the acid. During the solid–liquid transition, the Gibbs monolayer thickness remains almost the same, 22 ± 1 Å. In the solid phase, we have A = 20 ± 2 Å{sup 2}, and the angle of deviation of the molecular tails from the normal to the surface is about 30°. The density of the liquid monolayer phase with A = 24 ± 2 Å{sup 2} corresponds to liquid n-octadecane.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

CYP2E1 epigenetic regulation in chronic, low-level toluene exposure: Relationship with oxidative stress and smoking habit

Background: CYP2E1 is a versatile phase I drug-metabolizing enzyme responsible for the biotransformation of most volatile organic compounds, including toluene. Human toluene exposure increases CYP2E1 mRNA and modifies its activity in leucocytes; however, epigenetic implications of this interaction have not been investigated. Goal: To determine promoter methylation of CYP2E1 and other genes known to be affected by toluene exposure. Methods: We obtained venous blood from 24 tannery workers exposed to toluene (mean levels: 10.86 +/− 7 mg/m{sup 3}) and 24 administrative workers (reference group, mean levels 0.21 +/− 0.02 mg/m{sup 3}) all of them from the city of León, Guanajuato, México. After DNA extraction and bisulfite treatment, we performed PCR-pyrosequencing in order to measure methylation levels at promoter region of 13 genes. Results: In exposed group we found significant correlations between toluene airborne levels and CYP2E1 promoter methylation (r = − .36, p < 0.05), as well as for IL6 promoter methylation levels (r = .44, p < 0.05). Moreover, CYP2E1 promoter methylation levels where higher in toluene-exposed smokers compared to nonsmokers (p = 0.009). We also observed significant correlations for CYP2E1 promoter methylation with GSTP1 and SOD1 promoter methylation levels (r = − .37, p < 0.05 and r = − .34, p < 0.05 respectively). Conclusion: These results highlight the importance of considering CYP2E1 epigenetic modifications, as well as its interactions with other genes, as key factors for unraveling the sub cellular mechanisms of toxicity exerted by oxidative stress, which can initiate disease process in chronic, low-level toluene exposure. People co-exposed to toluene and tobacco smoke are in higher risk due to a possible CYP2E1 repression. - Highlights: • We investigated gene-specific methylation in persons chronically exposed to toluene. • In a previous study, a reduced CYP2E1 activity was observed in these participants. • CYP2E1 promoter methylation correlated with oxidative-stress related gene methylation. • CYP2E1 promoter methylation was higher in exposed smokers compared to nonsmokers. • Epigenetic modifications are critical to detect early toluene-exposure effects.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Probing the antagonistic effect of toluene as a component in surrogate fuel models at low temperatures and high pressures. A case study of toluene/dimethyl ether mixtures

There is a dearth of experimental data which examine the fundamental low-temperature ignition (T < 900 K) behavior of toluene resulting in a lack of data for the construction, validation, and interpretation of chemical kinetic models for commercial fuels. In order to gain a better understanding of its combustion chemistry, dimethyl ether (DME) has been used as a radical initiator to induce ignition in this highly knock resistant aromatic, and its influence on the combustion of toluene ignition was studied in both shock tube and rapid compression machines as a function of temperature (624–1459 K), pressure (20–40 atm), equivalence ratio (0.5–2.0), and blending ratio (100% toluene, 76% toluene (76T/24D), 58% toluene (58T/42D), 26% toluene (26T/74D) and 100% DME). We use several literature chemical kinetic models to interpret our experimental results. For mixtures containing high concentrations of toluene at low-temperatures none of these are capable of reproducing experiment. This then implies an incomplete understanding of the low-temperature oxidation pathways which control its ignition in our experimental reactors, and by extension, in spark- (SI) and compression-ignition (CI) engines, and an updated detailed chemical kinetic model is presented for engineering applications. Model analyses indicate that although the initial fate of the fuel is dominated by single-step H-atom abstraction reactions from both the benzylic and phenylic sites, the subsequent fate of the allylic and vinylic radicals formed is much more complex. Further experimental and theoretical endeavors are required to gain a holistic qualitative and quantitative chemical kinetics based understanding of the combustion of pure toluene, toluene blends, and commercial fuels containing other aromatic components, at temperatures of relevance to SI and CI engines.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Toluene Uptake and Outgassing by a 3D-Printed Silicone and the Impact on Mechanical Performance

Silicone elastomers have advantageous physical properties and are widely used in various applications. Additive manufacturing (AM) of silicones provides additional utility by enabling tunable mechanical and functional properties. However, the performance of these elastomers deteriorates over time with exposure to environmental stressors. Organic solvents and volatile organic compounds (VOCs) are stressors that can cause dimensional changes to silicones with exposure and impact the overall function. Yet, the effects of such exposure on mechanical performance, including load response (LR), are not well understood. Here, in this study, we investigated the impact of a nonpolar solvent, toluene, on AM silicone material properties and compressive load. We observed that AM silicones rapidly absorbed toluene and swelled, leading to an increase in relative LR. Toluene concentration and compression did not affect uptake or swelling rates. In contrast, outgassing rates were slower for compressed coupons compared to uncompressed specimens, attributed to geometric constraints and polymer network changes impacting toluene diffusion outward. Compression also pinned the AM silicones at an enlarged state, significantly reducing relative LR after outgassing. Depending on toluene concentrations and compression, AM silicones can remain robust against toluene exposure and recover their initial printing geometry and mechanical performance after toluene outgassing and polymer relaxation.

Materials science↗
DOE OSTI2024

Microwave-Assisted dry reforming of toluene as a model tar compound using low-cost iron catalyst for syngas clean-up

Gasification of waste feedstock such as biomass, waste plastics suffers from high tar yields during hydrogen-rich syngas production. The presence of tars result in lower quality syngas, lower syngas yields, reactor blockage, reactor down time, and costly maintenance. Therefore, removal of tar from syngas during gasification is essential. Catalytic reforming of tars via in-situ syngas cleanup is an effective way of mitigating tars. This work explores the possibility of microwave-assisted catalytic dry reforming of tars for syngas production. Further, due to its chemical complexity, toluene, which is one of the main tar constituents, could be used as a model tar compound. Toluene dry reforming was studied using the Fe/Al 2 O 3 catalyst under CO 2 under the temperature range of 400–700 °C. The toluene reforming reaction was conducted using microwave and conventional thermal reactors. Under microwave irradiation, CO 2 and toluene conversions are boosted to 80% at 500 °C. Hydrogen and carbon monoxide yields were approximately five times and ten times higher in the microwave reactor at 500 °C, respectively, compared to the productions obtained in the conventional fixed-bed reactor at 700 °C. Filamentous carbon was also produced as a valuable side product to improve the economy of this process and such value-added carbon was only observed in the microwave reactor. Three reaction pathways were observed during microwave reaction: the toluene decomposition produces an initial hydrogen and carbon deposit on the catalyst; the formation of methane and benzene suggests toluene hydrodemethylation as a secondary reaction; and toluene hydrogenolysis forms light alkanes such as methane, and through reforming reaction under CO 2 to syngas.

10 SYNTHETIC FUELS↗
DOE OSTI2021

Measurements of Intermediate Species in Fuel-Rich Oxidation of Ethylene, Toluene, and n -Decane

Polycyclic aromatic hydrocarbons (PAHs) are important precursors to the formation of soot and are also pollutant emissions from combustion devices, including internal combustion engines. To understand the formation of PAHs, the low-molecular-weight hydrocarbon chemistry leading to their formation needs to be understood. Toward this goal, fuel-rich oxidation of three different hydrocarbons, i.e., ethylene, toluene, and n-decane, has been investigated in an atmospheric pressure flow reactor at varying temperatures (1000–1350 K), equivalence ratios (φ = 3.0–12.0), and residence times of 0.25–1.5 s. The major C 1 to C 7 intermediates, such as methane, acetylene, ethylene, allene, propyne, propylene, vinylacetylene, 1,3-butadiene, cyclopentadiene, benzene, and toluene, were quantified using a gas chromatograph equipped with a flame ionization detector. The experimental tendency of intermediate species formation, e.g., the dependence of temperature, equivalence ratio, and residence time, was similar in ethylene oxidation and n-decane oxidation. The concentrations of intermediate species up to C 4 were higher in ethylene/n-decane oxidation than toluene oxidation, while a nearly equal or larger amount of C5–C7 species was produced in toluene oxidation. The experimental data were compared with modeling results using a detailed chemical kinetic mechanism. The calculated data using the kinetic model were in agreement with the experimental results. Additionally, a comprehensive kinetic analysis on the reaction pathways of each species was conducted to assess the differences in the oxidation chemistry with the change in the structure of hydrocarbons. In particular, in-depth analysis of benzene formation was performed, elucidating that two benzene formation pathways were important in ethylene and n-decane oxidation: (1) H elimination of the 2,4-cyclohexadienyl radical produced from the isomerization of the 2,4-cyclopentadienylmethyl radical, and (2) dehydrogenation of cyclohexadiene produced from reactions of vinyl radical with 1,3-butadiene. In toluene oxidation, it was found that benzene was primarily produced from toluene through the replacement of the methyl group with hydrogen.

30 DIRECT ENERGY CONVERSION↗