Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “task”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The effect of lighting environment on task performance in buildings – A review

The effects of indoor environmental conditions on human health, satisfaction, and performance have been the focal point of research for decades. This paper reviews and summarizes the impact of lighting environment on task performance, specifically for the built environment audience. Existing studies included a variety of performance tests on cognitive performance and perception, visual acuity and reaction, memory, reasoning, and labor productivity. Illuminance, luminance ratio and correlated color temperature were found to affect performance in different ways, reflecting the impact of experimental techniques, conditions, performance evaluation methods used and data analysis methods. These were reviewed and categorized, with discussion on limitations related to sample size, modeling approach, carryover effects and other factors affecting individual differences in performance, with recommendations for future improvement. Although no universal conclusions can be made, in general, task performance seems to improve with higher illuminances, contrast ratios in the range of 7–11:1 (while always making sure that glare will not occur in the space) and higher correlated color temperature, while spectral tuning in the red or blue wavelengths has also shown positive effects. To obtain more generic evidence, future studies should be more consistent in terms of experimental procedures and overall light conditions, and also consider the effects of vertical illuminance, daylight provision/control, and outside views on task performance. Finally, studying performance with multi-factorial designs in a human-centered optimized manner (such as deploying variable lighting scenarios optimized for various tasks) can lead to deeper understanding of lighting effects on task performance, and ultimately to improved lighting design and operation in buildings overall.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

I.3.4.1.1 Overview of Advanced Characterization Within the Powertrain Materials Program (Task 4A1) (Oak Ridge National Laboratory); (Task 4A2) (Argonne National Laboratory); and (Task 4A3) (Pacific Northwest National Laboratory)

This report describes the activities performed during the third year of Thrust 4A, “Advanced Characterization,” within the DOE-EERE VTO PMCP. The goal of the PMCP, which was launched in October 2018, has been to accelerate design, development, demonstration, and deployment of new, cost-effective advanced alloy solutions via a modern ICME approach. The properties of these new materials are targeted to enable improvements in engine efficiency, lightweighting, and durability enhancement over the full range of on-road vehicle classes (e.g., Classes 1-8), including range extenders for future electric HD freight vehicles.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

OpenMP Target Task: Tasking and Target Offloading on Heterogeneous Systems

This work evaluated the use of OpenMP tasking with target GPU offloading as a potential solution for programming productivity and performance on heterogeneous systems. Also, it is proposed a new OpenMP specification to make the implementation of heterogeneous codes simpler by using OpenMP target task, which integrates both OpenMP tasking and target GPU offloading in a single OpenMP pragma. As a test case, the authors used one of the most popular and widely used Basic Linear Algebra Subprogram Level-3 routines: triangular solver (TRSM). To benefit from the heterogeneity of the current high-performance computing systems, the authors propose a different parallelization of the algorithm by using a nonuniform decomposition of the problem. This work used target GPU offloading inside OpenMP tasks to address the heterogeneity found in the hardware. This new approach can outperform the state-of-the-art algorithms, which use a uniform decomposition of the data, on both the CPU-only and hybrid CPU-GPU systems, reaching speedups of up to one order of magnitude. The performance that this approach achieves is faster than the IBM ESSL math library on CPU and competitive relative to a highly optimized heterogeneous CUDA version. One node of Oak Ridge National Laboratory’s supercomputer, Summit, was used for performance analysis.

Valero Lara, Pedro↗
DOE OSTI2020

EBS Task Force: Task 9/FEBEX Modeling Final Report: Thermo-Hydrological Modeling with PFLOTRAN

This report outlines Sandia National Laboratories modeling studies applied to Stage 1 and Stage 2 of the Full-scale Engineered Barriers Experiment in Crystalline Host Rock (FEBEX) in situ test for the SKB EBS Task Force Task 9. The FEBEX test was a full-scale test conducted over ~18 years at the Grimsel, Switzerland Underground Research Laboratory (URL) managed by NAGRA. It involved emplacing simulated waste packages, in the form of welded cylindrical heaters, inside a tunnel in crystalline granitic rock and surrounded by a bentonite barrier and cement plug. Sensors emplaced within the bentonite monitored the wetting-up, heating, and drying out of the bentonite barrier, and the large resulting data set provides an excellent opportunity for validation of multiphysics Thermal-Hydrological (TH), Thermal-Hydrologic-Chemical (THC), and Thermal-Hydrological-Mechanical (THM) modeling approaches for underground nuclear waste storage and the performance of engineered bentonite barriers. The present status of the EBS Task Force is finalizing Task 9, which follows years of modeling studies of the FEBEX test, by many notable modeling teams (Gens et al., 2009; Sanchez et al. 2010; 2012; Samper et al., 2018). These modeling studies generally use two-dimensional axisymmetric meshes, ignoring threedimensional effects, gravity and asymmetric wetting and dry out of the bentonite engineered barrier. This study investigates these effects with use of the PFLOTRAN THC code with massively parallel computational methods in modeling FEBEX Stage 1 and Stage 2 results. The PFLOTRAN numerical code is an open source, state-of-the-art, massively parallel subsurface flow and reactive transport code operating in a high-performance computing environment (Hammond et al., 2014). Section 2 describes the applied partial differential equations describing mass, momentum and energy balance used in this study, considerations derived by assuming phase equilibrium between gas and liquid phases, constitutive equations for granite, cement plug, and bentonite domains, and specific approaches for use inthe PFLOTRAN code. Section 3 describes the geometry, meshing, and model set-up. Section 4 describes modeling results, Section 5 compares modeling results to field testing data, and Section 6 gives conclusions. The Appendix provides detailed information required by the EBSTask Force for final reporting.

42 ENGINEERING↗
DOE OSTI2020

IEA Wind Task 32 and Task 37: Optimizing Wind Turbines with Lidar-Assisted Control Using Systems Engineering

Lidar-assisted control is a promising technology for reducing the levelized cost of energy from wind turbines, but quantifying its impact at the overall system level requires sophisticated systems engineering analysis and optimization frameworks. The joint workshop on Optimizing Wind Turbines with Lidar-Assisted Control Using Systems Engineering was held by the International Energy Agency Wind Task 32 (Lidar) and Task 37 (Systems Engineering) in October 2019 to address this challenge. This paper summarizes the outcome of the workshop and presents a road map for further research. The most promising applications of lidar-assisted control identified at the workshop and discussed here include 1) increasing annual energy production, 2) decreasing capital expenditure costs by reducing design loads, 3) extending turbine lifetime by reducing operating loads, and 4) enabling wind turbine class upgrades. For each application, we review the state of the art and highlight remaining research needs. Finally, we discuss strategies for addressing these research needs by conducting high-fidelity systems engineering optimizations.

17 WIND ENERGY↗
DOE OSTI2023

On the feasibility of future colliders: report of the Snowmass'21 Implementation Task Force

Colliders are essential research tools for particle physics. Numerous future collider proposal were discussed in the course of the US high energy physics community strategic planning exercise Snowmass'21. The Implementation Task Force (ITF) has been established to evaluate the proposed future accelerator projects for performance, technology readiness, schedule, cost, and environmental impact. Corresponding metrics has been developed for uniform comparison of the proposals ranging from Higgs/EW factories to multi-TeV lepton, hadron and ep collider facilities, based on traditional and advanced acceleration technologies. Here, this article describes the metrics and approaches, and presents evaluations of future colliders performed by the ITF.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

JobQueue-PG: A Task Queue for Coordinating Varied Tasks Across Multiple HPC Resources and HPC Jobs

The software allows for queueing and dispatch of tasks of small, varied, or uncertain runtimes across multiple HPC jobs, resources, and other computing systems. The software was designed to allow scientists to enqueue, run, and accumulate results from computational experiments in an efficient, manageable manner. For example, the software can be used to enqueue many small computational experiments and run them using several long-running multi-node HPC jobs that may or may not run simultaneously.

Tripp, Charles↗
DOE OSTI2020

EFCOG Human Performance Improvement Task Group: Task 20-2, Asking Better Error Precursor Questions for Effective Job Planning, Pre-Job Briefs, and Event Investigations

The second principle of human performance states: “error-likely situations are predictable, manageable, and preventable.” An error-likely situation comes into play when task-related factors exceed the capabilities of the individual, creating a mismatch at the point when the individual is “touching” either the physical or the paper plant. The simple presence of adverse conditions cannot be error-likely unless a specific action is to occur within that set of adverse conditions.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Initial Process Planning of a Hybrid Multi-Tasking Platform

Abstract Applications of hybrid technology are expanding from refurbishment and repair to low quantity, specialty part production, which are staple characteristics in medical implant, energy, and aerospace industry sectors, among others. This expansion has led to the development of the Mazak VC-500A/5X AM HWD, a wire fed laser cladding unit equipped with a standard 5 axis CNC. This unit is capable of building near net geometry of complex medium to large parts within a profitable timeframe, due to its comparatively high rate of deposition to that of a powder fed hybrid system. In this study, deposition and machining capabilities of the VC-500A/5X AM HWD are assessed through the production of three different test geometries by different process plans. Production of these test geometries is supported by an open loop sensor package primarily for monitoring machine health, data collection, and machine operator aid. The viability of extended deposition followed by machining is evaluated against a more cyclical strategy of reoccurring deposition and machining operations. Lastly, common defects in as-built geometries are evaluated and addressed through revisions to original process plans and toolpaths, indicating the need for continued innovation in hybrid manufacturing specific CAM/CAD software, as well as closed loop machine monitoring and quality control.

DeWitte, Lisa N.↗
DOE OSTI2021

Human Performance Improvement Task Group Task 21-1 Best Practice: Using virtual capabilities or options for HPI application (to reduce errors, strengthening defenses, strengthening the organization, and/or increasing capacity)

In 2020 the world was impacted by COVID-19. How work is done was dramatically changed for a large portion of the workforce. Many have made the abrupt shift to working from their home while others have adapted to COVID protocols (such as social distancing and wearing facemasks). Fundamentally, Human and Organizational Performance Improvement concepts and science did not change – only the delivery method changed (in some cases). The primary effect has been to accelerate dynamics already present in society – from e-commerce to online education to remote healthcare. Change is never easy for humans. However, remote work should be viewed as an opportunity; not a fix to a problem. In this Best Practice paper, you’ll get practical suggestions to help you reduce errors and improve Human Performance in remote, socially-distanced “work-from-home” environments.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗